How to change MNC& MCC in 3G-CDMA please help
I have a Cisco HWIC-3G-CDMA-S card I activate it and everything is good but my service provider asked me to change the MNC and MCC (Mobile Network Code and Mobile Country Code) but I found no command that can do it because it is CDMA and has no SIM so I would be grateful if you help me with the command that can change those parameters .by the way there is command to change them in GSM cards so Are there any command which can do the same with CDMA .I have searched in every pdf in Cisco site but I found nothing.
I appreciate your help
I have a Cisco HWIC-3G-CDMA-S card I activate it and everything is good but my service provider asked me to change the MNC and MCC (Mobile Network Code and Mobile Country Code) but I found no command that can do it because it is CDMA and has no SIM so I would be grateful if you help me with the command that can change those parameters .by the way there is command to change them in GSM cards so Are there any command which can do the same with CDMA .I have searched in every pdf in Cisco site but I found nothing.
I appreciate your help
Similar Messages
-
I forget answer security questions.
How to changer answer your security questions.
Please help me!. Thankyou very much!Try going to https://appleid.apple.com/, click 'Manage your account' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and see if you can change your questions/answers, and then click Save at the bottom right.
-
i have adobe cc on pc but i have now joined the mac world but not sure how i change my pc software to mac please help
Your Photoshop CC can be installed on a Mac or PC. Just install the Mac CC Desktop app and install Photoshop CC from there. It will be in your Application folder.
-
My friend changed my password as a joke and when I asked her what it was she had forgotton and I am trying to change it on the computer but do not know how to any ideas?
If you're talking about your lock screen passcode, you can't "change it on the computer". You have to restore the phone.
-
How to change CSS if Javascript disabled. Please help.
Hi all,
So my pursuit for accessible and good looking pages
continues.....
I am working on a new website: XHTML, external CSS, PHP
driven.
I decided to use the nice Project Seven vertical scroll menu
for a looping newsbox. Works great with Javascript enabled and
opens as it should with Javascript disabled. However, I have the
scroll menu inside a div called "newsbox", which resides inside a
floated div. This of course causes the content to extend beyond the
main container.
Now to fix this issue what I would like to do is have the
Project Seven menu display when Javascript is enabled and when
Javascript is disabled I want to change the CSS of "newsbox" to
'overflow: scroll' so that the box still displays as a scroll box.
(This would keep my current design looking nice.)
I've looked at many solutions online but I need for it to
validate in XHTML.
All I want to be able to do is change that one line of CSS
for the "newsbox" div if Javascript is disabled.
I know this isn't really Dreamweaver related but I was hoping
someone might have a simple fix for this.
Any help or links to relevant online tutorials greatly
appreciated!
Thanks,
Rachelle"Rockyjd" <[email protected]> wrote in
message
news:gi8r8o$olm$[email protected]..
> Hi Thierry,
>
> Yes, your suggestion is exactly the route I'm trying to
take. My problem
> is
> I'm a complete ignoramus when it comes to Javascript!
> So this is my current CSS for the div that contains my
scrolling menu:
>
> #newsbox {
> background-color: #FFF;
> height: 305px;
> width: 300px;
> position: relative;
> visibility: visible;
> z-index: auto;
> left: 0px;
> top: 0px;
> margin-bottom: 5px;
> margin-top: 1px;
> overflow: scroll;
> }
> I've set the default value as 'overflow:scroll' and when
Javascript is
> enabled
> I want it to change to 'overflow:hidden' (so those ugly
blue scroll bars
> disappear and my nice Javascript scroll menu then takes
over.)
>
> So would I write the Javascript as follows?
>
>
document.getElementById('newsbox').style.overflow='hidden';
>
> And then my next question is: where do I put this
declaration? In the
> <head>?
> In the external CSS file? If it's in the <head>
should it be in <script>
> tags
> or preceded by something to make it work?
> Sorry for all the questions but I was trying to add the
Javascript
> yesterday
> and it wasn't working so I am definitely doing something
wrong.
> As I said I'm a Javascript dunce so any and all help is
greatly
> appreciated!
Hi Rachelle
Yes it should be inside a script element in head, but you
can't call it
before "newsbox" is available. You'd need to call it onload
or move the
snippet in the code, after "newsbox".
Thierry | Adobe Community Expert | Articles and Tutorials ::
http://www.TJKDesign.com/go/?0
Spry Widgets |
http://labs.adobe.com/technologies/spry/samples/
[click on
"Widgets"]
Spry Menu Bar samples |
http://labs.adobe.com/technologies/spry/samples/menubar/MenuBarSample.html -
HT204088 how can i spend my 47 cents to change my country in app store please help me
how can i spend my 47 cents to change my country in app store please help me
There's nothing available for 47₵ to purchase so use the email form to request that Apple zero out your account so you can change the country > Apple - Support - Mac App Store - Contact Support
Keep in mind, your credit or debit card credentials must be associated with the same country where you reside.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article -
How to create authorisation object for save button please help in abap
how to create authorisation object for save button please help in abap
Hi
In general different users will be given different authorizations based on their role in the orgn.
We create ROLES and assign the Authorization and TCODES for that role, so only that user can have access to those T Codes.
USe SUIM and SU21 T codes for this.
Much of the data in an R/3 system has to be protected so that unauthorized users cannot access it. Therefore the appropriate authorization is required before a user can carry out certain actions in the system. When you log on to the R/3 system, the system checks in the user master record to see which transactions you are authorized to use. An authorization check is implemented for every sensitive transaction.
If you wish to protect a transaction that you have programmed yourself, then you must implement an authorization check.
This means you have to allocate an authorization object in the definition of the transaction.
For example:
program an AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT <authorization object>
ID <authority field 1> FIELD <field value 1>.
ID <authority field 2> FIELD <field value 2>.
ID <authority-field n> FIELD <field value n>.
The OBJECT parameter specifies the authorization object.
The ID parameter specifies an authorization field (in the authorization object).
The FIELD parameter specifies a value for the authorization field.
The authorization object and its fields have to be suitable for the transaction. In most cases you will be able to use the existing authorization objects to protect your data. But new developments may require that you define new authorization objects and fields.
http://help.sap.com/saphelp_nw04s/helpdata/en/52/67167f439b11d1896f0000e8322d00/content.htm
To ensure that a user has the appropriate authorizations when he or she performs an action, users are subject to authorization checks.
Authorization : An authorization enables you to perform a particular activity in the SAP System, based on a set of authorization object field values.
You program the authorization check using the ABAP statement AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
ID 'ACTVT' FIELD '02'
ID 'CUSTTYPE' FIELD 'B'.
IF SY-SUBRC <> 0.
MESSAGE E...
ENDIF.
'S_TRVL_BKS' is a auth. object
ID 'ACTVT' FIELD '02' in place 2 you can put 1,2, 3 for change create or display.
The AUTHORITY-CHECK checks whether a user has the appropriate authorization to execute a particular activity.
This Authorization concept is somewhat linked with BASIS people.
As a developer you may not have access to access to SU21 Transaction where you have to define, authorizations, Objects and for nthat object you assign fields and values. Another Tcode is PFCG where you can assign these authrization objects and TCodes for a profile and that profile in turn attached to a particular user.
Take the help of the basis Guy and create and use.
Regards
ANJI -
I accedentally switched my iTunes to the UK store and I don't know how to switch it back. Can someone please help?
Click here and follow the instructions to change the iTunes Store country.
(105976) -
Hi There is a ghost search bar on my iMac that flashes continually, even during start up and shut down. How can i make this go away? Please help. x
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
HT204053 I have two Apple ID's. How do I delete one of them? Please help. Thank you. Dru
I have two Apple ID's. How do I delete one of them? Please help. Thank you. Dru
To add to the above...
From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs. -
I downloaded about 100 cds to my library and I can no longer view the downloaded artwork it's shows a black picture or blank. How can I get the artwork back? Please help! Thank you.
Hi- apparently I also had a similar moment of madness and thought that 'freeride games' would be fun. Well, so much for that! It added a ton of things to my tool bar, I would like to uninstall it, any suggestions for this one?
thanks :) -
in a document with several sections, in section VIII and IX one cannot select the text of the page foot nor set the pointer in it; so, one cannot write nor change the page foot text. Please help!
Question already asked and answered several times.
It's a bug striking in long documents.
Select a word somewhere higher in the page then use the arrows to reach the wanted insertion point.
Yvan KOENIG (VALLAURIS, France) mardi 23 août 2011 15:44:24
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
After upgrading my software i have seem to have lost all my contacts and photos, i did a back up but i have no idea how to get them back on? maybe im illiterate but i dont know how to find it in my itunes? please help!!
http://support.apple.com/kb/HT5824?viewlocale=en_US&locale=en_US
-
I have iOS 6 on my iPhone. i have linked my contacts with facebook and yahoo, which has doubled or triplicated some of the contacts. how can i integrate them into one? please help. it is getting on my nerves. thanks
click on the contact which you want to integrate, click the edit button scroll down u will find a option called link contacts use it to link it to the duplicate contact
-
Hello I forgot my Security question of my Apple ID ? I don't kow what should I do and how to solve this problem ? could you please help ?
You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(104569)
Maybe you are looking for
-
How to make Web Photo Gallery with 3 columns of thumbnails?
Hi all I have used web photo galery to build a few sites, but always with thumbnails in a single, vertical column, within a frame that scrolls. and i have never mch liked that scrollbar. I have come across this page: http://www.mariannekolb.com/recen
-
Down Payments with respect to PO
Dear all, Our client needs to pay down payments on a percentage basis on the PO's. But at the time of down payment, it the amount entered is more than the percentage stipulated, system should show an error message. For example, 30% Advance to be paid
-
my iphone version is 7.0 and it has been expired im trying to downgrade it but itunes gives me errors can anybody help ?
-
How do you place an image on the shortcut of an air package? This image is for the executable shortcut link like an ICO file for a dot.net application. Thanks in advance...
-
Who know where store the data about integration Directory objects?
I met some problem which is difficult analysis how to design for ID and find channel status(active or inactive). I just want to know currect table or stored mechanism. who does know about this?