How to change money market maturity date in TR modul

Dear Friends,
I want to change the maturity date for money market transaction. Currently the due date is 29.09.2008 but I want to change it to 15.04.2008. When I change it using tcode TS02, an error massage
"End of term is before end of calculation period of posted flow."
How can I fix this problem? anyone can help?
Norliza

Hi,
I hope you are required to reverse all posted (fixed flows) flows dated prior to the new term end date.
thanks,

Similar Messages

  • How to change it if some data is wrong in ODS and infocube

    hi all:
        could you please tell me how to change it if some data is wrong in ODS and infocube ?
    Best regards

    You receive information on all requests that have run in the InfoCube and you can delete requests if required.
    http://help.sap.com/saphelp_nw04s/helpdata/en/d4/aa6437469e4f0ae10000009b38f8cf/frameset.htm
    Request ID you can find in administration of the InfoCube. If a cubes is compressed you can't delete requestwise...
    Regards
    Andreas

  • How to change workflow for expired qualification in HR Module

    Hi,
    My question how to change workflow for expired qualification in HR Module.We need to when date is expired tcode OOQA that system will check and that time workflow should be triggred.
    I have serached sap help but i am not understand please below mention URL for SAP help
    Link: [http://help.sap.com/saphelp_47x200/helpdata/en/ee/f4c9cafbab11d29ea40000e8215202/frameset.htm]
    Please explain step by step how to trigrred workflow for expired qualification?
    Please this problem is high and try to solve it.
    Thx!
    Sachin

    Hi,
    Why do you want to trigger a wflow and what do you want to do with this trigger. Can you give more details of your exact requirements.
    But, if you are looking for how to trigger, you can write a small ABAP pgm and schedule it as a job every night. THis job basically reads the table P1000-ENDDA for expiry date and if it reached today, then you can either trigger the wflow with SAP_WAPI_START_WORKFLOW or use SAP_WAPI_CREATE_EVENT to raise your custom event(for Business Obj. BUS7018, i think this is your BO and there are no std events right now, so you will ahve to add your custom event by extending BUS7018 to ZBUS7018).
    Hope I am clear and this helps and if you need more details, reply.
    venu

  • How to change the schedule line date in SO with reference to value contract

    Hi SD Guru's,
    I need to change the schedule line date in the sales order with reference to the value contract by using some algorithm that i will write. The problem that i can't find the suitable place to add the algorithm. I can't add it to the Copy control because there is no schedule lines in value contract and copy control for schedule lines does no exist.
    I can not add to user exit MV45AFZZ  , because order that was created with reference to the value contract, does not go through this user exit.
    Do you have some ideas where i can add it?
    Thanks and Regards
    Viky
    Edited by: Viky Sloutsky on Oct 20, 2010 12:43 PM

    Hello Viky
    How about using program MV45AFZB- USEREXIT_CHECK_VBEP or USEREXIT_MOVE_FIELD_TO_VBEPKOM
    or program FV45EFZ1- USEREXIT_CHANGE_SALES_ORDER
    Does the program go through these exits when an order is created with ref to a value contract??
    Also I am wondering why you need to change a Schedule line determined by Availability check and/or delivery scheduling?

  • How to change the "content created" date/time in FCPX?

    Since I've had problems importing my whole iMovie event library into FCPX I decided to run some tests with importing individual files (part of iMovie events and originally imported from camera into iMovie). Some of them for some reason got the wrong "content created" date/time in them while in iMovie they have the right date/time set. Does anybody have an idea on how to change the "content created" timestamp?

    I had a bunch of DV files that imported stamped with the file modification date and time.  I did not find a way to change it in FCPX. With FCPX not running, I used A Better Finder Attributes to modify the creation and modification dates of the files in the event folder. FCPX reconnected to them but the event still showed the old range of dates so I created a new event and moved the clips to it. Maybe ther is a beter way but that is how I did it.

  • How to change the IDOC segment data

    How to change the segment data for all IDOCs at one shot J.
    For exmple E1EDK02-QUALF - 004
                       E1EDK02-RGID  -  100000008 (Inquiry No)
                   to
           E1EDK02-QUALF - 004
                       E1EDK02-RGID  -  200000005 (Quotation)
    Any hints, tips….Appreciate your help and more rewards.
    Regards,
    Cris

    Hi,
    You can change the IDOC values using the transaction WE09
    Give the IDOC number..
    Press F8..
    Expand the tree..
    Double click on the segment..
    Then in the menu..DATA RECORD -> DISPLAY/CHANGE..
    It will go in change mode..Change the IDOC value..
    Thanks,
    Naren

  • How to change the valid from date of the bom header?

    ECM is active in the system.
    I want to change the valid from date of the BOM header with the help of a change number.
    How can I change it?

    Hello
    Lets assume that, we are going to change Management for controlling Valid From date
    Steps to be followed for creation of Change No
    Tcode CC01 for Change No
    Click on Change Master
    Once you enter into Change master, maintain the description
    In the Valid from Date, maintain the date from which you BOM should be current
    Maintain the Status (01)
    Click on Ojbect Type, maintain for which Object types is the Change no needs to be active i.e. for BOM, Rtg, etc
    save the Change No
    After the change no is created
    Enter the Change No during the creation mode of BOM
    THe system copies the Valid from date from Change No

  • How to change the default "no data found"

    Hi,
    Is there a way to change the default "no data found" message of the "When No Data Found Message" in the Report Attributes?
    I would like to change that message for a French message. I know that I can change it manually in every section, but I would like another default messages appearing when i create a Report Section.
    Thanks

    Can you point me to a tutorial?Sure, Users Guide > Managing...Globalization (Chapter 15?)
    Is this not happening at run-time?Yes. What happens at runtime is the selection of the application to run. If you run a page in the Application Builder (app 4000) and that application had not been translated or your browser language were set to some flavor (flavour) of English, you get 4000. If app 4000 had been translated to French, say, and you request a page in 4000 and have your browser language set to French, then you'll really run the requested page from app 4002 which is a copy of 4000 translated to French long before your request came along.
    If you look at our distribution, you'll find 9 (or more) versions of each of the internal applications in the builder directory.
    Scott

  • How to change charts default   "show data label" properties.

    I tried to change some defult properties of charts.I changed font, color etc, manipulating pcxml file. But i can't fount defult behaviour of data lables. I want to change defult chart "Show Data Labels" properties as "Alwasy" , not "On rollover".
    Thanks for all reply

    You need to go to the General Properties : Data Labels: Always
    Thanks
    Prash

  • How to change csv file to dat file

    Hi, 
    I want ask you about the data that i got.
    Actually, the data in csv file. So, can i change directly file to dat file? Just put c:\Trace.dat?
    can or not? 
    Need your help.
    Thank you.
    Solved!
    Go to Solution.
    Attachments:
    csv.JPG ‏108 KB

    NurHidayah wrote:
    Actually this format in MATLAB software. So, i want this dat format because I want to simplify my data imported directly into the software.
    And what is the format that is defined?  Or are you referring to MAT files, which are binary files specific to Matlab?
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • How can change numeric value to date format? example value 1070131(CYYMMDD)

    in the datatable can i change numeric value to date format . in database date value is like 1070131 (CYYMMDD). I want to see 31/01/07(DD/MM/YY) or 31 Jan 07 . Is it possible?
    Thanks,

    Did you solve your problem?

  • How to change fiscal year to 2006 in AA module

    Dear Experts,
    Due to the uploading problem, some of the net value of asset is '0'. Those data was uploaded in 2006. in 2007, then I realized the error and want to change the asset master data. When I click on save, the system prompt the error "Fiscal year 2006 is already closed in Financial Accounting".
    How to check the fiscal year in Asset Accounting ?
    Please help.
    Thanks.
    Regards,
    Tan

    Hi,
    You can undo fiscal year change in transaction code OAAQ (entire company code) or OAAR (By Area). Year end closing is executed using transaction code AJAB.
    Thanks
    Murali.

  • How to change COGS at movement type in SD modules

    Dear Experts,
    I'm midst of make some settings for online buyers for our company goods. We call this as eSP process. Below I explain more in details how it works before go to my issue. This may help you understand well about this issue.
    Exp: customer - EP-ZSB277
    Stor. loc : 10TP
    Stock available : 10 pcs (t/code: MMBE)
    Material : 3100010223 & moving average price (MAP) RM10/pc
    1. SO : ZEI1 (SRS)
    - qty: 1pc
    - outbound delivery : YEI1
    - billing : XEI1
    - movement type : 631
    - material movement : 10TP qty 9pcs (stock reduce) & customer consignment stock EP-ZSB277 qty 1pc (stock increase)
    since this is online business, user do Billing once customer place the order BUT that material still at our premises under special stock (customer consignment stock, NOT at stor. loc. 10TP) until sufficient stock to make delivery
    2. SO : ZEF1 (replenishment)
    - qty: 1pc
    - outbound delivery : YEF1
    - NO billing
    - movement type : 633
    - material movement : customer consignment stock qty 0pc (stock out from location) & NO effect at stor. loc. 10TP
    user will do ZEF1 & YEF1 when delivery to customer taking place (stock out will happen in system)
    So far I managed to do all these settings & all are work fine unlikely COGS.
    - COGS happen during YEF1, NOT at YEI1. Honestly I didn't do any settings against this COGS for eSP process so I don't know how this happen & how to change this. In fact I'm wonder how to make this settings in SD modules.
    - user said this is wrong coz SRS & replenishment is not happen in same day
    Exp: ZEI1 (SRS) today but ZEF1 (replenishment) happen at next month. Before ZEF1 for 3100010223 material to EP-ZSB277 customer, there are high possibilities that 3100010223 sell to other customer & this caused to COGS can be differ.
    Now I'm seeking your help how may I set COGS to YEI1 & cancel COGS at YEF1. Please assist me. TQ
    rgds,
    nema

    Dear Experts,
    I created few settings such;
    SO type: ZEI1
    1. OMJJ
    - create new goods movement 631 = Z31 (copy from 631)
    - account grouping for Z31 u2013 GBB (trans. Event. Key) u2013 Z31 (acct. modifier)
    2. Schedule line
    - Y6
    - tag movement type Z31
    - this use at SO type ZEI1
    3. OBYC
    - transaction GBB
    - c/code 3100 u2013 general modification Z31 u2013 valuation class 7920 (base on material master) u2013 g/l acc
    SO type: ZEF1
    1. OMJJ
    - create new goods movement 633 = Z33 (copy from 633)
    - account grouping for Z33 u2013 GBB (trans. Event key) u2013 Z33 (acct. modifier)
    2. Schedule line
    - C4
    - tag movement type Z33
    - this use at SO type ZEF1
    3. OBYC
    - transaction GBB
    - NO g/l acct set against acct. modifier Z33
    Now I create SO ZEI1 & outbound delivery YEI1 u2013 COGS not created with error
    Material document 4900349707 does not include an accounting document
    Message no. M7082
    Diagnosis
    The system cannot find an accounting document for the material document 4900349707.
    Possible reasons for this are:
    u2022     The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
    u2022     The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
    u2022     The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
    Procedure
    u2022     Choose Continue and then choose another function.
    u2022     Find out when the material document was created. If the document was created prior to the Release changeover, ask your system administrator to carry out the conversion of the documents. The individual steps required for document conversion are described in the Release Notes for Release 2.1B.
    But when I created another SO ZEF1 & outbound delivery YEF1, system give error during PGI. Actually I didnu2019t set any g/l acct for acct modifier Z33.
    Account determination for entry CNI GBB 3100 Z33 7920 not possible
    Message no. M8147
    Diagnosis
    The system did not find an account for this transaction. This means that the account determination for key CNI GBB 3100 Z33 7920 is not maintained in MM Customizing (Valuation). The key is made up of:
    u2022     Chart of account
    u2022     Transaction key (= Posting transaction)
    u2022     Valuation grouping code
    u2022     Account grouping code
    u2022     Valuation class
    System Response
    The system cannot update a G/L account for this transaction. You cannot post the transaction.
    Procedure
    Contact your system administrator.
    If you have the authorization, check the Account determination in Customizing for Valuation.
    Proceed
    Note
    The relevant posting transaction can be found in Table T030A.
    1. Well may I know how the system know that this movement Z33 (633) should have acct determination (COGS) & not at movement type Z31 (631).
    2. how to change the COGS from Z33 to Z31, even though I did some creation at OMJJ. OBYC & schedule line
    3. appreciate if you could help me explain on the 1st error message that I attached on top such release 2.1, release 2.1B , RM07MWBU & others.
    Thank you so much for your support so far.
    Plz guide me Guru.
    Rgds,
    nema

  • Mail.app/ToDo: How to change Input format of Date Due?

    Hello,
    I am using english version of Leopard 10.5.7 with international/Formats region setting set to german. In applications it usually results in dates like 23.12.2008 (dd.mm.yyyy).
    However, Mail.app's ToDo still requires me to enter mm/dd/yyyy dates ("month-first").
    How do I change it, so Mail.app also accepts european dd.mm.yyyy dates?
    Regards,
    t-80

    Hello,
    is there a chance to get a question answered?
    or shall one better contact apple support by phone?
    regards.

  • How to change the caption in data entry selection screen??

    using cats0009 i populated the data into wbs desc and a/a desc but
    but i am not able to change the name(caption of additioanl field) as 'wbs description'. and A/A desciption.
    can anyone please help me out how to do this...

    You don't mean selection text do you? Can you be more specific?

Maybe you are looking for