How to change MRP Type in mass ?
Hi experts,
I want to change MRP type (MDMA-DISMM) in MRP 1 view of material master. I checked in Tcode MM17 , but this field is not available for mass maintenance.
How to change it in mass? Thanks in advance.
Regards,
Jay
Dear,
Tcode: MM17
Select Plant Data for material: MARC
In the menu: Click on Select New Fields
In the selction list, pick MRP type
Once MRP type is selection, replace old MRP type with NEW MRP type
Once New MRP type is selection, enter the materials or plant for which NEW MRP TYPE is applied
Lastly, execute the transaction.
OR,
You are trying to change value of MARC-DISMM
You can use BAPI BAPI_MATERIAL_SAVEDATA
Regards,
R.Brahmankar
Similar Messages
-
How to change data type of attribute in caf
hi.
this is my problem.
i been added a attribute in an entity service called emloyee. named "Birthday", use the data type "com.sap.caf.core.date".
when i tried modify the entity service, i hit exception about "DST Daylight Saving Time".
because of DST, the date will add an hour such like "1957/04/01 00:00:00.0" to "1957/04/01 01:00:00.0", and com.sap.caf.core.date will throw an exception.
is anyone had same problem like me?
how to fixed it(if passable)?
and, how to change data type?
thanks.Hi Sruthi,
all you need to do on this is open the report go to the parameters, select the parameter that you wish to change and click "Edit". This will allow you to change thefield to a date rather than a date time.
Regards,
Noel -
Where is "save as" or how to change file type in Preview in Lion?
Where is "save as" or how to change file type in Preview in Lion? I used to use Preview to change quickly change a lot of PNGs to either JPEGs or PDFs but with the introduction of versions auto save etc there no "save as" in the File menu. Any suggestions how to get this functionality back or how to get around it within OS X (no Photoshop etc)?
Just wasted 15 minutes looking for that. What's wrong with Save As?
-
How to change light type?
Does anyone know how to change light type?
What happens is that I have a button that I would want to create a Point light, but it just create a spot light.
Does anyone know how to change it to create a point light?
My code is:
//Add a Point Light to active Comp
addLightCtrl.onClick = function(){
var pointLight = proj.layers.addLight("Light", [960, 540]);See the LightLayer object's lightType attribute. Page 100 of the AE CS6 scripting guide.
pointLight = activeItem.layers.addLight("Light", [960, 540]);
pointLight.lightType = LightType.POINT; -
How to change latency type to fast?
How to change latency type to fast?
ADSL Line Status
Connection information
Line state:
Connected
Connection time:
5 days, 03:08:00
Downstream:
16,403 Kbps
Upstream:
948 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
3.1 dB / 4.7 dB
Line attenuation (Down/Up):
30.5 dB / 16.2 dB
Output power (Down/Up):
20.9 dBm / 12.2 dBm
FEC Events (Down/Up):
313987846 / 3701
CRC Events (Down/Up):
2155 / 18271
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
49173 / 14016
Error Seconds (Local/Remote):
0 / 17361 -
I want to change Material Type for mass upload.(MMAM)
hi all,
I want to change Material Type for mass upload.(MMAM)
Suggestion pls? or Any BAPI is availablre?
Edited by: abap_friends on Jan 6, 2011 7:12 AM
Moderator message: please do your own research before asking.
Edited by: Thomas Zloch on Jan 6, 2011 11:27 AMThis may be little tough for 10000 sales orders.
1. You have to remove the output record for the irrelevant output record using tcode VV12 for the relevant document type. So now for the document type, the old output wont be triggered.
2. Now, create output records for hte correct output type in VV11 tcode(for the output type BA03) for the document type. Now this output will be triggered for all the document types you are creating from now onwards.
3. To trigger the output type BA03, in all the old orders, you just have to open these sales orders in change mode (VA02), and just save it. When u open it the output type BA03 will be automatically triggered as the master data is maintained in VV11. But because just opening all the 10000 sales orders in VA02 one by one be a mechanical task, you have to think of some tool for this.
May be a CATT procedure can do the trick. Else, you can just create a small program, where you can upload these sales orders and the program will just open these orders in change mode and just saves it (without making any changes). Then the output will be retriggered.
Here again, if you are printing the output directly, it is advisable to trigger the output in batch mode(Date/Time field is 1 in VV11), and then you can again trigger the printing again using the program RSNAST00 after office hours for these 10k orders.
I hope I answered ur query.
Pls lemme know if you need some more info. (You can reward me too...) -
How to change nat type 3 to nat type 2 for Plastation 4?
how to change nat type 3 to nat type 2 for adaptation 4? i am havng a complicated time with this im'm just trying to play online and been at it fotr 3 days i have tried about everuyhing n portforwarding.com i have a Cisco Linksys E1000
Hi ceasar14. I actually found some steps (from a source) that worked for me. I'm not sure if it will work for you. Here are the steps:
1. Get the MAC address of your PS3. To find your MAC address simply go to
Settings > System Settings > System Information
2. Assign a static IP address on your PS3.
3. Access your router's user interface to open a few ports.
4. Under Applications and Gaming > Port Range Forwarding, open the following ports:
TCP: 80, 443, 5223
UDP: 3478, 3479, 3658
5. Once this is done, powercycle your PS3 and the router.
6. Run a connection test and check if it is now on NAT2.
Good luck. -
HOW TO CHANGE ACCOUNT TYPE FROM IMAP TO POP
HOW TO CHANGE ACCOUNT TYPE IN YOUR EMAIL FROM IMAP TO POP
You can't. You need to create a new account in Mail.
Note, when setting up a new account (after clicking the '+' in the Accounts proeference), enter an invalid email address or option click the Continue button to be given the choice of account type (POP or IMAP). -
Hi all,
I have a requirement to mass change the MRP type from PD to V1,
Is there any FM available for this.
Thanks in advance,
KCHi,
Are you trying to change value of MARC-DISMM?
If you are, you can use BAPI BAPI_MATERIAL_SAVEDATA.
Also you can use transaction MASS with object type BUS1001.
Next step, select table MARC, and fields MARC-DISMM.
Regards,
Ferry Lianto -
The MRP type in the material master is grayed out and cannot be changed.
How can I change the MRP type?
Sincerely,
KetanHi,
Go to MARC table. You can get the MRP profile assigned to Material and Plant.If you find a profile assigned. Then go to MMD2 and check the field for the Profile. Uncheck the check indicator under MRP type. This should allow you to change the MRP type for the Material.
Hope this help you.
Thanks -
How to change material type and industrial sector of the exsisting material
Hi,
There is an issue where user wants to change material type and industrial sector of the exsisting material .Is it posible to do so??
IF not ,how can we delete that material from material master so that another material with same number and required material type and industrial sector can be created.
Points will be definitely rewarded.
Thanks
RohitHi Rohit,
You can change the material type in MMAM trxn code if the material dosenot conatain any open purchase requisitions, open reservations & open purchase orders. Also material stock should be zero.
Remember the new material type should have same attributes same as old material type.
OLD Material New Material
1) Standard Price 1) Standard Price
2) Manufacture part 2) Manufacture part
profile actvated profile actvated
3) Quantity & Value 3) Quantity & Value
Updation in all areas Updation in all areas
4) should have same GL 4) Should have same GL acs
acs
It is not possible to change Industry sector once created.
If you want to delete the Material, you can flag it in MM06 trxn code.
Reg,
Ashok
Dont forget to Assign points if useful. -
How to change set type attribute of a product
Hi ;
I created additional fields for products by using "COMM_ATTRSET". It created a table and functions but I dont know how to change this additional attributes.I cant use these attribute set functions because i dont know fragment_id yet. I think there must be a function encapsulates them.
Is there any BAPI to change set type attributes?
PS: In forums , I found an FM "COM_PRODUCT_MAINTAIN_MULT_API" but I think it hasnt been used anymore in CRM7.0
ThanksThanks for your reply ;
but FM 'COM_PRODUCT_UI_MAINTAIN' doesnt have any generic import parameters to send my data to it in form of newly created attribute set type table "ZPRODUCT".
I want to set some fields of ZPRODUCT and i need to send them in this structure, this table has column FRG_ID , if you set an additional parameter for the first time , it generates new GUID..I think 'COM_PRODUCT_UI_MAINTAIN' generates this GUID but i dont know how to use it.
Can you give an example about using this FM? -
Error value = 73, How to change the type of password?
I want to use the famous wiki integrated in leopard, so I had to configure open directory and DNS.
Well my problem come from that I can't configure open Directory, just after creating a new admin, I have no possiblity to change the type of password, there is just the type shadow, and I know that we had to choose open directory's type.
Obviously, I'm authenticated in the workgroup manager
Which services I had to turn on to use open directory's type?
Or which mac I have to hit.
THXHi
So I had to configure open directory and DNS
What did you do or not do exactly?
My problem come from that I can't configure open Directory
You won't be able to configure Open Directory to allow different password types unless you either bind your Server to an existing KDC or make your Server the KDC. For the Server to be a KDC (Kerberos Distribution Center) it has to be an Open Directory Master. Successful promotion to an Open Directory Master Role absolutely depends on a correctly configured and running DNS Service - either on the server itself or on another server on the same network.
There are plenty of posts in these forums outlining how to configure your Server in terms of DNS as well as how to promote to Open Directory Master. Apple themselves make available Admin Manuals that should assist:
http://images.apple.com/server/macosx/docs/OpenDirectory_Adminv10.5.pdf
http://images.apple.com/server/macosx/docs/NetworkServices_Adminv10.5.pdf
Failing this these forums (as already mentioned) as well as:
http://www.afp548.com
Hope this helps, Tony -
How to change data type of input parameter
Hi
In my procedure i declared the data type of "Value Date" Input parameter as Date where as in CR it is showing data type as "Date Time". Can any one please specify how to change to Date.
While prompting for input parameter in description it is showing message as
Please enter Date time in format"yyy-mm-dd hh:mm:ss" . To change the content selected "format field" option. But is there any way to change input parameter data type.
Please suggest how to change.
Thanks SruthiHi Sruthi,
all you need to do on this is open the report go to the parameters, select the parameter that you wish to change and click "Edit". This will allow you to change thefield to a date rather than a date time.
Regards,
Noel -
How to change your type of ipod in itunes
How can you change your type of ipod in itunes. We purchased a new Ipod touch and the computer/itunes will not reconize it.
Try:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Make sure you have iTunes version 10.5
Maybe you are looking for
-
Re Problem with Log & Transfer
When capturing using log & transfer,the media shows in transfer window but after adding it to queue it then shows in status button as no data? Can anybody help.
-
Impossible to edit or add the signature in a freshly installed convergence
we are using directory server 6.3 messaging server 7.0 convergence patch 3 in the convergence web interface is not possible to edit or add the signature the text box doesn't react to my input, click or mouse is there something that need to be added t
-
There is an icon at the top right of my phone with a padlock and an arrow circling the padlock. I have no idea how I turned it on but now the phone won't sync. Can anyone help? Thank you so much.
-
How to choose App-V 5 Sequencing "Primary Virtual Application Directory"?
Hi, How to choose App-V 5 Sequencing "Primary Virtual Application Directory"? Should I use c:\program files\MyAppR1 or just c:\program files or c:\Anything, dose it matter? /SaiTech
-
Reg:How to update VC values using BAPI_SALESORDER_CREATEFROMDAT2
Hi, We are creating sales order using the BAPI_SALESORDER_CREATEFROMDAT2 FM but we also want to update variant configuration values in those sales orders. I'm passing these tables (ORDER_CFGS_REF, ORDER_CFGS_INST, ORDER_CFGS_VALUE) to the FM.' The sa