How to change network settings

hello,
so i just recently got my first macbook pro (yay me)
and the day i was setting it up i was going through the start ups and all and when it came to the network connections i used a connection that is a guest connection for my home router and now every time i start my mac i have to change the connection to the connection i need it to be (the guest connection requires a password for every time i want to use safari and it gets annoying)  so i was wondering is there anyway to delete that guest connection and set my main router to be the main network connection on my mac?
please and thank you : )

Here is your support page with what you need.
http://support.hp.com/us-en/product/HP-Photosmart-Plus-All-in-One-Printer-series---B2/3777155/model/...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

  • Internet connection not working: don't know how to change network settings

    I have a Macbook Pro with an internet connection that normally works fine. However, in my apartment, we are provided with a cable modem that has only one ethernet cable hook-up. Since we needed atleast two ethernet connections for two computers, we bought a switch that we hooked into the cable modem to give us extra ethernet ports.
    Recently, while hooking up my ethernet cord to the switch, I have not been able to connect to the internet. Network Diagnostics tells me my Built-in Ethernet is working correctly, but Network Settings are at yellow, and my ISP, Internet and Server have all failed. I have followed all instructions to check my connections, and restart the modem, switch and computer many, many times but there is no problem with any of these things. The other computer connects fine on the switch and cable modem.
    Additionally, under Network in System Preferences, I am being shown that there is an IP address and Subnet mask, so I am assuming there is nothing wrong with the cord, modem or switch (which work fine on the other computer), but there is no Router number, which seems odd. If it helps narrow things down, I am also trying to connect to the internet via DHCP rather than PPPoE, which is what I normally use.
    I am guessing I must have accidentally changed something to do with my network settings and it is not adapting to the cable modem any longer. Unfortunately, I do not know how to do this, nor what to change it to if I had to. My landlady knows nothing about what kind of network settings I need to connect to the internet service provider. Other than calling Time Warner Cable (who provides the cable modem with ethernet hook-up)is there anything else I can do or should be considering in order to get my internet connection working?

    heather1688 wrote:
    Recently, while hooking up my ethernet cord to the switch, I have not been able to connect to the internet. Network Diagnostics tells me my Built-in Ethernet is working correctly, but Network Settings are at yellow, and my ISP, +*_Internet and Server have all failed_*+.
    I am having this problem if you find a fix please let me know. I have spent hours with apple trying to fix this. Im going on my third week with apple trying to fix this and i have a thread on this issue.
    http://discussions.apple.com/thread.jspa?threadID=2104335&tstart=0

  • How to change Network Settings on iPhone OS 3.1.3 on my iPhone 3G?

    I'm using the iPhone 3G locked with Bharti Airtel in India. Airtel, for a brief time was authorized to unlock the iPhone 3G after the completion of contract period of a year but, now it doesn't.
    Airtel has three network settings but I'm unable to change the settings. I need to change it to use unlimited data plan. Is there any official way to change it? and if not, will it possible to change the settings after I unofficially unlock it? Please suggest.
    P.S. I'm running the latest iPhone OS 3.1.3

    sangeet.b wrote:
    I'm using the iPhone 3G locked with Bharti Airtel in India. Airtel, for a brief time was authorized to unlock the iPhone 3G after the completion of contract period of a year but, now it doesn't.
    Airtel has three network settings but I'm unable to change the settings. I need to change it to use unlimited data plan. Is there any official way to change it?
    The ability to change the APN settings on the iPhone depends on the carrier file. Basically the carrier has told Apple if they want the settings to be enabled or not. In the case of the iPhone in Canada all carriers do not allow for the APN settings to be changed, and it would appear that Airtel is the same.
    If the iPhone is being used properly with the carrier that the iPhone is locked to there should be no reason to change the APN settings.
    sangeet.b wrote:
    will it possible to change the settings after I unofficially unlock it? Please suggest.
    P.S. I'm running the latest iPhone OS 3.1.3
    As far as unlocking the iPhone goes the only way it to see if your carrier will unlock it for you. According to Apple you are correct in saying that Airtel does not offer unlocking, but you can always call them to double check.
    http://support.apple.com/kb/HT1937
    Hacking the iPhone is not recommended, and can not be discussed here on this forum. You can search Google, but if you are running 3.1.3 hacking your iPhone to unlock it might not even be an option.
    http://support.apple.com/kb/HT3743

  • How to Change Security Settings on an Existing Wireless Network

    I'd like to change existing network security settings to WPA2, AES or at least to from TKIP to AES.
    I'm familiar with browser access to the router and with how to change the settings on the router.
    My question is how to do this as painlessly as possible for the network.  Step by step would be nice
    I guess first I have to change the router settings using the computer running Easy Link Advisor?
    Do I then have to disconnect/reconnect that computer?
    Do I have to disconnect every other computer and then connect each one again with the updated settings?
    Will the change in security settings affect my print server?  If so, do I have to set it up from scratch in ELA?
    For the record, I have a WRT-300N and the print server is a 54g.
    Anyone who reads this may also want to look into recent news.  May not be a big deal, but a vulnerability of WPA/TKIP has been identified.
    Thanks in advance to anyone who answers.
    Solved!
    Go to Solution.

    Do I really need to set security for my wireless connection. I searched for available WiFi in my area prior to installing my  network and none were available. Does that matter?
    The network never did function right from the start. My desktop is a Dell Inspiron 510n and is not wireless capable? So when I tried to add my HP mni 1000 it did not let me access the Internet.
    So now I have an unsecured network. Am I vulnerable to attack?
    Which leads me to my real question How do I change the security settings?
    Oh yeah, my home computer crashed due to a program I downloaded, so I do not have access to it. i'm a mess....
    Thanks,for any help
    Phil

  • How to change screen settings

    Hi
    I have a small issue that in ABAP editor, screen is displaying like script editor and allowing me to delete the lines one by one ratherthan deleting all the lines at the same time.could u plz tel me,how to change the settings to allow the user for multiple lines selection?
    I m using the version 4.5b.
    Thanks & Regards
    Ravindra

    Hi,
      refer u may get an idea.
    https://forums.sdn.sap.com/click.jspa?searchID=4333019&messageID=3617437
    Regards

  • Does anyone know how to change the settings for siri as all he keeps saying to me is he can only look up businesses in the u.s

    my siri seems to be a bit confused as he thinks im in america but im in northern ireland is ther anyone who knows how to change the settings as i cant find them alsao he doesnt understand a word im saying

    To use another iCloud backup, you have to erase all content and settings or restore it. Either gets you to the backup/setup page.
    http://support.apple.com/kb/HT1766

  • NW04s: How to change column settings like 'do not adjust' 'fit to resuts' e

    In the new Analyzer, old report format: how to change column settings: do not adjust, fit to results, etc.?
    Regards
    -Bala

    Hello,
    In the properties dialog of the Grid and some other items, there is a checkbox by name "Autofit". When this is checked, the result columns are expanded to correct data widths.
    Regards,
    Manjunath

  • How to change the Settings in the Graphic structure. T Code CN41

    Hi,
    How to change the Settings in the Graphic structure. T Code CN41
    Iam using the T Code cn41 to know the diff in Duruation, work, remaining duration in diff project version. I am getting the Graph/curve with standard settings and system is not allowing to change the scale (Y-X Axis) the way i required.
    Pls advise me.
    Thanks in Advance.
    Raju

    Hi,
    Thanks for the reply. But please clarify a bit. Please below is my requirement.
    As per the SAP Avilable screen in T Code CN41,it is showing the scale of 1 and 2 only.
    Assume if it 12 Days as actual work VS Actual duration of 265 Hours .It is showing 2 = actual work of 12 days and 1= Actual duruation of 12 Days.  I want to have the scale in such a way that, we should be able to see from 0-100-200-300 Hours and Days 5-10-15-20.
    Can u pls advis how can i get these and also give me ur mail id so that i can send u the screen shot also.
    Regards
    Raju

  • How to change Preset settings (CS4)

    Hello everyone,
    I'm going to make a video with Adobe Premiere CS4 and I need to know how to change Preset settings or however it is called, because I think none of the Presets match with my videos (tried some and my videos were bigger or smaller).
    My videos are .mov, 800x600, made and rendered in Autodesk 3ds Studio Max 2010 (3D Program).
    Could someone please help me? I don't know if there's a preset for me or if I have to change settings or something like that (and where). Yes, I'm new! I'm from Spain if you need it.
    Feel free to ask anything you need, of course.
    Thanks in advance,
    Marta

    Marta,
    Welcome to the forum.
    In CS4 and CS5, one can set the Preset at the Sequence level. Before, it was more global, at the Project level.
    In Sequence New, you will choose the Desktop Preset, and then you can alter almost every displayed attribute, such as Frame Size, or Frame Rate, etc. you want to match your Sequence to your source footage 100%. After editing with those attributes matching, you can then Export to a desired output setting with AME (Adobe Media Encoder). You choice of Desktop, allows you to customize the settings to match. I wish that Adobe had named it "Custom," as the term "Desktop" is a bit abstract, though it has been around for a very long time.
    Good luck, and do match your Sequence settings (Desktop) to your source footage.
    Hunt

  • HT1296 cannot sync the calendar on my ipad mini with my main imac computer. the settings on itunes say that my ipad is syncing over the air but it is not unfortunately. i cant see how to change the settings if need be. would appreciate help. thanks

    i canot sync the calendar on my ipad mini with my main imac computer. the settings on itunes say that my ipad is syncing over the air but it is not unfortunately. i cant see how to change the settings if need be. would appreciate help. thanks

    i have done this on my ipad mini and my imac but they are still not syncing. my iphone 4 has the icloud symbol but it seems to be unresponsive to touch, I cannot get it to highlight or turn-on. Bit confused.

  • I accidentally changed network settings and now I can't connect to internet

    (I posted this on the board for OS X 10.4, but I figured my OS is irrelevant to my problem, so I thought I'd post it here for a better chance of getting help)
    I accidentally changed some network settings on one of the computers on my network, and now it wont connect to the internet. All the other computers on the network work fine. I guess I need help getting things back to how they were.
    I have absolutely no experience with networks, so I don't have a clue what to do. One thing I notice that might be of help is that when it's set to "Configure: Using DHCP," the section for "Router:" is blank. No address. The router address on all the other computers is 192.168.1.1. Similarly, the IP address on all the computers is some variation of 192.168.1.x, but on the problem computer it's a completely random number (as far as I can tell).
    Any help would be EXTREMELY appreciated.
    Thanks!

    Open Network preferences on the computer, select the connection method, click on the Advanced button. Click on the TCP/IP tab and set the Configure IPv4 drop down menu to DHCP. Click on the Apply button.
    BTW, you need to post your questions in the appropriate forum which would have been the appropriate Tiger forum. This is the Snow Leopard forum.
    Message was edited by: Kappy

  • New router - how to change wifi settings for Photosmart B109n

    I got a new router. How do I change the wifi settings for my Photosmart B109n?  I changed the PC wifi settings (no problem). I connected the PC (Windows 7) to the printer by USB cable. In the HP Solutions Centre, when I click on Settings / Network Settings, it tries to open a browser (IE9) page, with the URL being the IP address (192.168.2.3), but it goes to the "cannot display" page. Do I need the HP software CD? (I think I've lost it.) The manual explains how to set up (using the CD), but I can't find how to change settings for a new router.

    Glad to see that you have everything solved. If you run into any other problems, feel free to ask. 
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • How to change colour settings on Satellite Pro P300

    I just got my new laptop and can't for the life of me find how to change the colour settings in the monitor.
    On my old desktop there was a button on the monitor.
    Being a first time laptop user im going nuts trying to find how to change my monitor settings...
    If anyone can help id be so grateful

    Please dont mix the notebooks internal monitor with the external desktop PC monitor.
    You will not find any control unit like on the external monitor which would help you to change the color.
    I dont know what graphic chip your notebook uses but my notebook supports Intel graphic card and the preinstalled Intel graphic media accelerator (in control panel) provides some settings for color correction;
    The settings are; color, gamma, brightness and contrast
    There you can set the values between 0 and 100
    Maybe this is what you are looking for

  • How to Change Finder Settings in All Windows?

    Hi All,
    Similar to the original post found here:  Re: How to Change View Options for ALL Finder Windows?
    I'm trying to change my finder settings across all finder windows... I tried the solution posted in the above thread but get this message in terminal.  I'm not all that computer savvy when it comes to terminal so not sure what it means... Perhaps someone knows of a different and/or better solution?
    Any help would be much appreciated, thanks and take care!
    Dave

    Yup got it back after waiting, followed the remaining directions, but didn't work for me... not sure why?  Upon rebooting folders do not change after I readjust settings and click 'use as default'.... strange... I even tried that other line of code another person posted later on in the previous thread. 

  • When closing and reopening, my tabs aren't restoring like the once did. My history is only keeping one day. Need to know how to change these settings.

    When closing and reopening Firefox, my tabs aren't restoring like they once did. I used to have all my tabs restore each time I opened Firefox. Now it starts with one fresh new tab and all my others are lost. I do a lot of research so this is important.
    My history is only displaying one day even though I have never changed my settings even after I updated it last year.
    Need to know how to restore these settings.
    ***OH! special note: I can't use the recently closed tabs or recently closed windows because its a grayed out option****

    Are you using cleanup software like CCleaner?
    If you use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.
    * http://kb.mozillazine.org/Session_Restore
    There are other things that need attention:
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Java Plug-in 1.6.0_05 for Netscape Navigator (DLL Helper)
    Update the [[Java]] plugin to the latest version.
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

Maybe you are looking for