How to change number of billing copies?

My system is always taking 4 as default number of copies in vf02
I want to change it.
Plz help me

hi,
in vv32---- communicatio method----number of messages field make chnages here.
saurabh

Similar Messages

  • HT204380 how to change number in FACETIME..????

    how to change number in FACETIME..????  very urgent please some1 do REPLyyy....

    Your FaceTime number is your phone number. I don't believe you can change it without changing your phone number.

  • How to change number of retries and delay before retrying after software install failure

    I deploy a software to client, but the installation is fail, so it will retry. but How to change the number of retries and delay before retrying after software install failure?
    I find "Retry Settings" in "Software Distribution Component Properties". But I think it work for Distribution, not the installation. am I right?

    First, are you referring to packages or applications because the behavior is different.
    Also, why do you want it to retry a failure? It failed for a reason so you need to fix the cause of the failure first. If it failed the first, it will likely fail the next time for the same reason. In general, ConfigMgr will only retry on transient type
    errors.
    Jason | http://blog.configmgrftw.com

  • How to change number format to international setting

    Hello everyone,
    I need some help on how to change the number format on my phone from the standard US format to an international format with no spacing between the numbers. Currently, my numbers appear as: 0706 343 3456. However, I will like for it to appear as 07063433456. When i recieve calls, the number format is not recognised and I cannot tell who is calling. Same goes for SMS messages. In this part of the world, the number format is not spaced, which is quite frustriating.
    Can anyone please advice me on how to go about this.
    Thanks

    Really? I tried that but it did not work. I restarted the iphone several times but the number format did not change.

  • How to change number range in solution manager

    Hi all,
    Recently we had upgrade of ST patch, after that our support message sequence got changed and now support messages are getting created starting from 1. We want to change the sequence(number range).
    how/where can i change the sequence of the support messages(number ranges).
    Thanks & Regards
    Nick Loy

    Hi Prakar,
    Thanks but as you told above, i am not able to change the number range 01 to 02 in SNRO.
    System is not allowing me to chagne the existing one.
    now my system has the details as below:in SNRO>>>>CRM_SERVIC>>>>
    01     0000000001     0000999999     780
    02     9999000000     9999999999     0         External
    I want to change the message sequence starting from 9999000001 which is in extenal number range.
    And one more thing, where can i find the number range which is being used for particular transaction?
    can you help me how to change?
    Thanks & regards
    Nick Loy

  • How to change number format in web reports

    Hi, Experts,
        Simple question, if I want to change the number format on web report as following
    . . . . . . . . Actual
    . . . . . . . . *1000SGD 
      new order   .   341.5
      sales       .   567.45
    if I click "Actual" then select properties, set data format from "in 1000" & "0" to "in 1" & "0.00", nothing changed in web report after refresh.
    if i click one number (for example: 341.5) or "New order" to set data format from "in 1000" & "0" to "in 1" & "0.00", only this row's format is changed, others row still keep old format.
    how to change whole column's data format at once setting?
    thanks in advance.
    Message was edited by: jie miao
    Message was edited by: jie miao

    Hi,
    Logout and login may help you and also Delete the session in SM04  before re login. Some times system will not do complete refresh of data even though you select refresh button.
    With rgds,
    Anil Kumar Sharma .P

  • How to change number range for document type ?

    Dear All
    Experts
    How to change the number range for document types for entry view? I am trying to change the number range for all document type as per defined ranges in FBN1, but at the time of saving document type and number range the system is throwing error message as 
    Doc. type C1: Number range 07 is used for ledger L6 with doc. type AE
    Message no. FAGL_LEDGER_CUST093
    I have defined a leading ledger in system too with these settings
    1)     Define ledger for accounting.
    2)     Defining currencies for it.
    3)     Defining ledger group for the same.
    4)     Defining accounting principles
    5)     Assignment of principles to leading ledger.  
    Are there any extra settings required for leading ledger settings?
    I have some doubts those are :-
    How document types defined at ledger level?
    How to define them at leading ledger level?  (Like my case)
    Focus on this will be appreciable.
    Regards,
    Sharvari Joshi.

    hi ,
    The document numbers in the leading ledger and the non leading ledgers should be in sync, they should not have any differences, so incase you are trying to change the number range for C1, the  number range 07 is already been assigned to doc type AE. i guess you have cant use 07 for C1. may be you can try out with an other number range. check this and let me know if you are able to do this.
    coming to
    1.How document types defined at ledger level?
    2.How to define them at leading ledger level? (Like my case)
    Ans 1. please try defining document types for entry view in a ledger.
    path : SPRO- financial accounting new -financial accounting global settings new - document -document types -define document types for entry view in ledger.
    upon prompt enter the ledger and go ahead creating the number ranges for the document types.
    Hope this helps.
    Regards
    amrutha

  • How to change account group "Bill-to" to "Sold-to"

    Hi,
    Could anyone suggest how I can change the account group of a customer from "Bill-to" to "Sold-to".
    I tried with XD07, but i get the error message
    The planned change is not allowed as the following field
    groups would be masked by the new account group
    please help.
    Regards
    Rasheed

    Hi,
    There will be only one and unique sold to party for any customer and different bill to partys..So when u are changing bill to party to sold to party then it is just adding one more sold to party to same customer which system will not permit to have two sold to party..
    u can change ship to bill to and bill to ship to ,payer to bill to ...
    If u want to change Bill to sold to then u need to untick no changes and uniqe fileds for sold to party in partner determination then u can try to change bill to sold..
    Regards
    Sankar
    Edited by: sankar sankar on Apr 15, 2008 3:41 PM

  • How to change safety interval in COPA extractor

    Hi, guys!
    I had a problem with changing safety interval in COPA extractor. I created COPA datasource using keb0. In RSA2 it can only view security interval. It is 1800 sec by default. I cannot change it.
    How can I change it? I cant do it in RSO2, because it is not true generic delta.
    Note 808663 is not implemented (we have higher patch on R/3). Delta extraction is correct, but safety interval is very annoying
    Please help.
    Message was edited by: Emerald

    Thanks. I'll try to.
    I thought I should edit ROOSOURCE, but it's maintainable in productive system.
    Should I reInit delta after corrections implementation?

  • How to change number of records displayed in Web service: Query_view_data

    Hi experts
    I´m using webservice Query_view_data to fill a Xcelsius model with data.
    The Bex Query contains appr. 300 records but the webservice returns only 50 records. When I test it it says "displaying 50 of 312 records".
    When I tried ABAP FM RRW3_GET_QUERY_VIEW_DATA it gave all 312 records.
    Does anyone know how I can change this setting so that all 312 records are displayed in the webservice?
    Best Regards
    Kenneth

    Mani,
    I have changed the properties of the chart as you said and gave 4 decimal places. If my actual data value is 0.787989, i would expect it to result 0.7879 but the outcome is 0.7800. It is replacing the other two decimal places with 0's rather than the actual number. Is this a bug in OBIEE or am i doing anything wrong?? Is there any other way to do this. Please let e know...
    Thanks,
    vnk
    Edited by: user8708843 on Aug 18, 2010 8:03 AM

  • How to change number of rings or time before it goes to voice mail on iphone 3g

    How do I change the length of time or number of rings on the iphone 3g before it goes into voice mail?

    Set by your carrier, so contact them.

  • How to change Number of Rows in a Tabular Form report page?

    Hi
    I am working with a tabular form to create an attendance sheet for a school using Oracle Application Express 3.0.1.00.12. Whenever I change the Number of Rows value from 10 to 1000 in the Layout and Pagination section of the report page, the SUBMIT button is not working and it is unable to process at that stage. How can I change the valu so that I can see all the rows in a single page, make changes to all rows and submit the page rightaway. Please help me.
    Thanks,
    Chak
    Edited by: user520137 on Jan 12, 2010 12:04 PM

    Hi
    I am working with a tabular form to create an attendance sheet for a school using Oracle Application Express 3.0.1.00.12. Whenever I change the Number of Rows value from 10 to 1000 in the Layout and Pagination section of the report page, the SUBMIT button is not working and it is unable to process at that stage. How can I change the valu so that I can see all the rows in a single page, make changes to all rows and submit the page rightaway. Please help me.
    Thanks,
    Chak
    Edited by: user520137 on Jan 12, 2010 12:04 PM

  • How to change number of new messages

    Is there a way to change how iCloud shows the number of new messages from including the whole thread of messages?
    ie - it shows the number of all old messages in a thread when there's just one new message.

    The only way to do so with Tiger Mail is by using the Activity Viewer.
    At the Mail.app menu bar, go to Window and select Activity Viewer or use the Apple/Command key - Command/number 0 key.
    I've been using the Mail.app exclusively since Jaguar was introduced, thru Panther and now Tiger and I've always preferred keeping the Activity Viewer window open.
    I keep the Activity Viewer window at the bottom right just below the bottom of the Mail.app window.

  • How to change number's label & how to specify alert hour in calendar?

    I have iPhone 4 on version 4.1 and I would like to change the labels of my contact's phone numbers.
    For example, my dad has two mobile numbers, but I can only set one mobile number (the other one can be "work", "home", etc.) so in that case I would like to have 2 labels named "mobile". And what if I would like to add a custom label, for example "restaurant"? How can I do it?
    Another thing I would like to set is a different event alert than what I'm offered. For example, I can have my alert 1 or 2 hours before, but not 3 hours before (the next option is already 1 day before). How can I change that?
    Thanks for your help!

    I just got off the phone with apple tech support. The problem for me was that I had my contacts set to sync with google. This means they were essentially being saved and managed by google. By turning off syncing with google, all those fields, including 'add custom label' became available. To manage the google sync setting, on your phone go to SETTINGS > MAIL,CONTACTS,CALENDARS > GMAIL > CONTACTS. If you turn this off your contacts will be saved and managed by your phone. Be sure to turn icloud syncing on and that it includes contacts. To do that, go to SETTINGS > ICLOUD > CONTACTS. This is the ideal solution, however it removes your google contacts from the phone. To get the google contacts back onto your phone without switching your sync settings back to google, download your google contacts into Outlook or Windows Live mail and export them into the phone. I can't give you steps on how to download them from google, but to get them from Outlook or Windows Live Mail to your phone, do this: while the phone is plugged in, go into iTunes. click once on your phone name where it appears in the list to the left, by default it shows you the SUMMARY screen. It's hard to notice, but look at the top of the summary screen and see that there are other links there for INFO, APPS, MUSIC, etc. Click on INFO. Check the SYNC CONTACTS with option and choose outlook or windows, whichever applies to you. Click the APPLY button at the very bottom of the screen and it'll sync it up. Good luck!

  • How to change number format in a dynamic VO

    Hi,
    Dynamic VO :
    Using "createViewObjectFromQueryStmt"
    Dynamic UI :
    <pre>
    <af:table rows="#{bindings.DynamicVO.rangeSize}"
    emptyText="No data to display."
    var="row"
    value="#{bindings.DynamicVO.collectionModel}"
    id="t21"
    rendered="#{pageFlowScope.ComponentDetailsBean.showContentTable}"
    styleClass="AFStretchWidth">
    <af:forEach items="#{bindings.DynamicVOIterator.attributeDefs}"
    var="def">
    <af:column headerText="#{def.name}" id="c21">
    <af:outputText value="#{row[def.name]}"
    id="ot41"/>
    </af:column>
    </af:forEach>
    </af:table>
    </pre>
    Issue :
    If there are any columns of type number are there , they are by default displayed in currency format. Can we change them. For (static) VOs , we can set column format in attributes. How to go about dynamic VOs.
    Actually, it would be helpful, if some one can say, where its getting format from.
    Appreciate your help.
    Thanks
    Venkatesh

    Hi.
    This is Business Planning forum ...
    Try to post your question to Logistic forums ...
    Regards.

Maybe you are looking for