How to change number of decimals in percentage agreement rebates

Hi,
I'm searching for a solution to have percentage amounts with 5 decimals instead of 3, in the conditions of rebate agreements.
That's concerning transactions VBO1, VBO2, VBO3.
Thanks for help.

dear bras
refer this
Changing Data Types and Lengths of Existing Fields
If a data element is assigned to the field, you must change the technical field attributes (data type, length, number of decimal places) in the domain of the data element.
Procedure for Fields with Data Elements
Double-click on the name of the data element.
The data element maintenance screen appears.
Double-click on the name of the domain.
The domain maintenance screen appears.
Choose Domain ® Display ® Change.
Make the required changes and save your entries.
Note that this change affects all the table fields that refer to the particular domain. Foreign keys could become inconsistent and conversions required. You should therefore consider the effects of this action before changing the domain by choosing in the maintenance screen of the domain and checking if the domain is used in other tables.
Choose .
The table is activated again and the table field is adjusted to the domain change.
Procedure for Fields with Direct Type Entry
Place the cursor on the field and choose Data element / Direct type.
Values can now be entered in fields Data type, Length, DecPlaces and Short text.
Change the entries for the data type, length and possibly the number of decimal places.
Save your entries.
Choose .
Note that a table conversion will normally be necessary (see Adjusting Database Structures) if you change the field attributes.
rewards if it helps
siva

Similar Messages

HT204380 how to change number in FACETIME..????

how to change number in FACETIME..???? very urgent please some1 do REPLyyy....

Your FaceTime number is your phone number. I don't believe you can change it without changing your phone number.

How to change number of retries and delay before retrying after software install failure

I deploy a software to client, but the installation is fail, so it will retry. but How to change the number of retries and delay before retrying after software install failure?
I find "Retry Settings" in "Software Distribution Component Properties". But I think it work for Distribution, not the installation. am I right?

First, are you referring to packages or applications because the behavior is different.
Also, why do you want it to retry a failure? It failed for a reason so you need to fix the cause of the failure first. If it failed the first, it will likely fail the next time for the same reason. In general, ConfigMgr will only retry on transient type
errors.
Jason | http://blog.configmgrftw.com

How to change number format to international setting

Hello everyone,
I need some help on how to change the number format on my phone from the standard US format to an international format with no spacing between the numbers. Currently, my numbers appear as: 0706 343 3456. However, I will like for it to appear as 07063433456. When i recieve calls, the number format is not recognised and I cannot tell who is calling. Same goes for SMS messages. In this part of the world, the number format is not spaced, which is quite frustriating.
Can anyone please advice me on how to go about this.
Thanks

Really? I tried that but it did not work. I restarted the iphone several times but the number format did not change.

How to change number range in solution manager

Hi all,
Recently we had upgrade of ST patch, after that our support message sequence got changed and now support messages are getting created starting from 1. We want to change the sequence(number range).
how/where can i change the sequence of the support messages(number ranges).
Thanks & Regards
Nick Loy

Hi Prakar,
Thanks but as you told above, i am not able to change the number range 01 to 02 in SNRO.
System is not allowing me to chagne the existing one.
now my system has the details as below:in SNRO>>>>CRM_SERVIC>>>>
01 0000000001 0000999999 780
02 9999000000 9999999999 0 External
I want to change the message sequence starting from 9999000001 which is in extenal number range.
And one more thing, where can i find the number range which is being used for particular transaction?
can you help me how to change?
Thanks & regards
Nick Loy

How to change number format in web reports

Hi, Experts,
    Simple question, if I want to change the number format on web report as following
. . . . . . . . Actual
. . . . . . . . *1000SGD
new order   .   341.5
sales       .   567.45
if I click "Actual" then select properties, set data format from "in 1000" & "0" to "in 1" & "0.00", nothing changed in web report after refresh.
if i click one number (for example: 341.5) or "New order" to set data format from "in 1000" & "0" to "in 1" & "0.00", only this row's format is changed, others row still keep old format.
how to change whole column's data format at once setting?
thanks in advance.
Message was edited by: jie miao
Message was edited by: jie miao

Hi,
Logout and login may help you and also Delete the session in SM04 before re login. Some times system will not do complete refresh of data even though you select refresh button.
With rgds,
Anil Kumar Sharma .P

How to change number range for document type ?

Dear All
Experts
How to change the number range for document types for entry view? I am trying to change the number range for all document type as per defined ranges in FBN1, but at the time of saving document type and number range the system is throwing error message as
Doc. type C1: Number range 07 is used for ledger L6 with doc. type AE
Message no. FAGL_LEDGER_CUST093
I have defined a leading ledger in system too with these settings
1)     Define ledger for accounting.
2)     Defining currencies for it.
3)     Defining ledger group for the same.
4)     Defining accounting principles
5)     Assignment of principles to leading ledger.
Are there any extra settings required for leading ledger settings?
I have some doubts those are :-
How document types defined at ledger level?
How to define them at leading ledger level? (Like my case)
Focus on this will be appreciable.
Regards,
Sharvari Joshi.

hi ,
The document numbers in the leading ledger and the non leading ledgers should be in sync, they should not have any differences, so incase you are trying to change the number range for C1, the number range 07 is already been assigned to doc type AE. i guess you have cant use 07 for C1. may be you can try out with an other number range. check this and let me know if you are able to do this.
coming to
1.How document types defined at ledger level?
2.How to define them at leading ledger level? (Like my case)
Ans 1. please try defining document types for entry view in a ledger.
path : SPRO- financial accounting new -financial accounting global settings new - document -document types -define document types for entry view in ledger.
upon prompt enter the ledger and go ahead creating the number ranges for the document types.
Hope this helps.
Regards
amrutha

How to change number of records displayed in Web service: Query_view_data

Hi experts
I´m using webservice Query_view_data to fill a Xcelsius model with data.
The Bex Query contains appr. 300 records but the webservice returns only 50 records. When I test it it says "displaying 50 of 312 records".
When I tried ABAP FM RRW3_GET_QUERY_VIEW_DATA it gave all 312 records.
Does anyone know how I can change this setting so that all 312 records are displayed in the webservice?
Best Regards
Kenneth

Mani,
I have changed the properties of the chart as you said and gave 4 decimal places. If my actual data value is 0.787989, i would expect it to result 0.7879 but the outcome is 0.7800. It is replacing the other two decimal places with 0's rather than the actual number. Is this a bug in OBIEE or am i doing anything wrong?? Is there any other way to do this. Please let e know...
Thanks,
vnk
Edited by: user8708843 on Aug 18, 2010 8:03 AM

How to change number of rings or time before it goes to voice mail on iphone 3g

How do I change the length of time or number of rings on the iphone 3g before it goes into voice mail?

Set by your carrier, so contact them.

How to change Number of Rows in a Tabular Form report page?

Hi
I am working with a tabular form to create an attendance sheet for a school using Oracle Application Express 3.0.1.00.12. Whenever I change the Number of Rows value from 10 to 1000 in the Layout and Pagination section of the report page, the SUBMIT button is not working and it is unable to process at that stage. How can I change the valu so that I can see all the rows in a single page, make changes to all rows and submit the page rightaway. Please help me.
Thanks,
Chak
Edited by: user520137 on Jan 12, 2010 12:04 PM

Hi
I am working with a tabular form to create an attendance sheet for a school using Oracle Application Express 3.0.1.00.12. Whenever I change the Number of Rows value from 10 to 1000 in the Layout and Pagination section of the report page, the SUBMIT button is not working and it is unable to process at that stage. How can I change the valu so that I can see all the rows in a single page, make changes to all rows and submit the page rightaway. Please help me.
Thanks,
Chak
Edited by: user520137 on Jan 12, 2010 12:04 PM

How to change number of new messages

Is there a way to change how iCloud shows the number of new messages from including the whole thread of messages?
ie - it shows the number of all old messages in a thread when there's just one new message.

The only way to do so with Tiger Mail is by using the Activity Viewer.
At the Mail.app menu bar, go to Window and select Activity Viewer or use the Apple/Command key - Command/number 0 key.
I've been using the Mail.app exclusively since Jaguar was introduced, thru Panther and now Tiger and I've always preferred keeping the Activity Viewer window open.
I keep the Activity Viewer window at the bottom right just below the bottom of the Mail.app window.

How to change number's label & how to specify alert hour in calendar?

I have iPhone 4 on version 4.1 and I would like to change the labels of my contact's phone numbers.
For example, my dad has two mobile numbers, but I can only set one mobile number (the other one can be "work", "home", etc.) so in that case I would like to have 2 labels named "mobile". And what if I would like to add a custom label, for example "restaurant"? How can I do it?
Another thing I would like to set is a different event alert than what I'm offered. For example, I can have my alert 1 or 2 hours before, but not 3 hours before (the next option is already 1 day before). How can I change that?
Thanks for your help!

I just got off the phone with apple tech support. The problem for me was that I had my contacts set to sync with google. This means they were essentially being saved and managed by google. By turning off syncing with google, all those fields, including 'add custom label' became available. To manage the google sync setting, on your phone go to SETTINGS > MAIL,CONTACTS,CALENDARS > GMAIL > CONTACTS. If you turn this off your contacts will be saved and managed by your phone. Be sure to turn icloud syncing on and that it includes contacts. To do that, go to SETTINGS > ICLOUD > CONTACTS. This is the ideal solution, however it removes your google contacts from the phone. To get the google contacts back onto your phone without switching your sync settings back to google, download your google contacts into Outlook or Windows Live mail and export them into the phone. I can't give you steps on how to download them from google, but to get them from Outlook or Windows Live Mail to your phone, do this: while the phone is plugged in, go into iTunes. click once on your phone name where it appears in the list to the left, by default it shows you the SUMMARY screen. It's hard to notice, but look at the top of the summary screen and see that there are other links there for INFO, APPS, MUSIC, etc. Click on INFO. Check the SYNC CONTACTS with option and choose outlook or windows, whichever applies to you. Click the APPLY button at the very bottom of the screen and it'll sync it up. Good luck!

How to change number format in a dynamic VO

Hi,
Dynamic VO :
Using "createViewObjectFromQueryStmt"
Dynamic UI :
<pre>
<af:table rows="#{bindings.DynamicVO.rangeSize}"
emptyText="No data to display."
var="row"
value="#{bindings.DynamicVO.collectionModel}"
id="t21"
rendered="#{pageFlowScope.ComponentDetailsBean.showContentTable}"
styleClass="AFStretchWidth">
<af:forEach items="#{bindings.DynamicVOIterator.attributeDefs}"
var="def">
<af:column headerText="#{def.name}" id="c21">
<af:outputText value="#{row[def.name]}"
id="ot41"/>
</af:column>
</af:forEach>
</af:table>
</pre>
Issue :
If there are any columns of type number are there , they are by default displayed in currency format. Can we change them. For (static) VOs , we can set column format in attributes. How to go about dynamic VOs.
Actually, it would be helpful, if some one can say, where its getting format from.
Appreciate your help.
Thanks
Venkatesh

Hi.
This is Business Planning forum ...
Try to post your question to Logistic forums ...
Regards.

How to decide number of decimals

Hi!
I wonder how I can decide how many decimals I want. I write a program where I use doubles, but there is no limit on how many decimals I get. How can I limit the decimal the easiest way?
for instance like this:
double a = 1.23
double b = 1.46
double c = a * bWhere c is in format x.xx (eg 2.34).
Also, is there a way to e.g tell that you want 2 decimals, but if the number you get is an integer (eg. 1), it will only say 1 and not 1.00.
Thank you in advance.

Cissi wrote:
Also, is there a way to e.g tell that you want 2 decimals, but if the number you get is an integer (eg. 1), it will only say 1 and not 1.00.There sure is, but this depends on your interpretation of what the double being an integral value means. You never want to deal with absolute == operations on doubles.
This is a way of telling whether a double is an integral value to 5 decimal places:
double a = 3.000006;
int factor = 100000;
if ( Math.round(a) * factor == (int) (a * factor) ) {
//a is an integer to 5 decimal places
}There are probably better ways to do this though; I don't use floating point numbers all that much in what I do.
edit I threw up a bit in my mouth after I read what I wrote there. Please don't use that. I wouldn't.
Edited by: endasil on Dec 20, 2007 9:53 AM

How to change number for support message in satellite system

Hi,
When i'm creating the messages in the satellite sytem the messages are generating with internal number range(0000002345) of solman.I would like to change to external number as (9999000000).
Please help me to resolve the issue.
Regards,
Eswar.

Hello,
SPRO > Solution Manager > Basic Settings > Scenario Specific Settings > Service Desk > Check Number Range for Service Desk Message
Check Number Range for Service Desk Message
Use
In this Customizing activity, you check the new internal and external number ranges for the Service Desk.
Activities
1. Select the transaction type SLFN.
2. Choose Goto -> Details.
3. Check the internal number range 01 and the external number range 02 under Transaction / Numbering.
4. Save your entries.
I hope this helps.
Regards,
Paul

How to change number of decimals in percentage agreement rebates

Similar Messages

Maybe you are looking for