How to change number range from internal to external?

Hi Experts,
I have changed the number ranges for accounting document for company code (A1) external to internal and posted one accounting document using the tr.code FBN1. Now i need to revert back the changes for the number range from internal to external. i am not able to cancel the accounting document as its cancellation accounting document? please let me know any other way to change the number range from external to internal?
Thanks & Regards,
Raj

Hi Siva,
Thanks for your reply. But my expectation is any other way to change the number range from internal to external instead of going new number range (By taking any technical help)?

Similar Messages

How to change number format to international setting

Hello everyone,
I need some help on how to change the number format on my phone from the standard US format to an international format with no spacing between the numbers. Currently, my numbers appear as: 0706 343 3456. However, I will like for it to appear as 07063433456. When i recieve calls, the number format is not recognised and I cannot tell who is calling. Same goes for SMS messages. In this part of the world, the number format is not spaced, which is quite frustriating.
Can anyone please advice me on how to go about this.
Thanks

Really? I tried that but it did not work. I restarted the iphone several times but the number format did not change.

How to change number range in solution manager

Hi all,
Recently we had upgrade of ST patch, after that our support message sequence got changed and now support messages are getting created starting from 1. We want to change the sequence(number range).
how/where can i change the sequence of the support messages(number ranges).
Thanks & Regards
Nick Loy

Hi Prakar,
Thanks but as you told above, i am not able to change the number range 01 to 02 in SNRO.
System is not allowing me to chagne the existing one.
now my system has the details as below:in SNRO>>>>CRM_SERVIC>>>>
01 0000000001 0000999999 780
02 9999000000 9999999999 0 External
I want to change the message sequence starting from 9999000001 which is in extenal number range.
And one more thing, where can i find the number range which is being used for particular transaction?
can you help me how to change?
Thanks & regards
Nick Loy

How to change number range for document type ?

Dear All
Experts
How to change the number range for document types for entry view? I am trying to change the number range for all document type as per defined ranges in FBN1, but at the time of saving document type and number range the system is throwing error message as
Doc. type C1: Number range 07 is used for ledger L6 with doc. type AE
Message no. FAGL_LEDGER_CUST093
I have defined a leading ledger in system too with these settings
1)     Define ledger for accounting.
2)     Defining currencies for it.
3)     Defining ledger group for the same.
4)     Defining accounting principles
5)     Assignment of principles to leading ledger.
Are there any extra settings required for leading ledger settings?
I have some doubts those are :-
How document types defined at ledger level?
How to define them at leading ledger level? (Like my case)
Focus on this will be appreciable.
Regards,
Sharvari Joshi.

hi ,
The document numbers in the leading ledger and the non leading ledgers should be in sync, they should not have any differences, so incase you are trying to change the number range for C1, the number range 07 is already been assigned to doc type AE. i guess you have cant use 07 for C1. may be you can try out with an other number range. check this and let me know if you are able to do this.
coming to
1.How document types defined at ledger level?
2.How to define them at leading ledger level? (Like my case)
Ans 1. please try defining document types for entry view in a ledger.
path : SPRO- financial accounting new -financial accounting global settings new - document -document types -define document types for entry view in ledger.
upon prompt enter the ledger and go ahead creating the number ranges for the document types.
Hope this helps.
Regards
amrutha

How to change Number range to Contact Person in Customer Master Record

Dear all,
We are maintaining contact person details under contact person tab in customer master record.
Currently contact person is being created using VAP1 transaction.
Can we automate this contact person creation by entering the data in contact person itself?
and where can we change the number range of contact person.
I have searched a lot to find the solution for this. Please help me to resolve this issue. Your suggestions will be highly appreciated.
Best regards
Venkat

Hi Venkat,
To your first question: "Can we automate this contact person creation by entering the data in contact person itself?"
Yes, you can enter the contact person directly in the customer master in the contact person tab. A number is generated automatically.
To your second question, go to transaction SNUM, and there use object "PARTNER". Here you can configure number range for contact persons.
Hope this helps,
Regards
Nikhilesh

How to return number range from sql (dual table)

in sql plus
I need to display values (numbers)1 to 52 from dual
eg,
1
2
3
4
5
etc...
Is this possible, can you display a range of numbers from an sql statment without creating atble holding the required numbers.
I am trying to display 1 to 52 (week numbers) but I need to do this from the dual table.
Creating a table with values 1 to 52 looks like a waste?
Thanks in anticipation.
SD.

If you're running on 9i you may find the solution I posted Re: List all days of a month in single SQL to be useful. Otherwise the general discussion will provide some illumination.
Cheers, APC

Is it possible to change sender address from internal to external

Hi
I'm trying to find a way to send emails with exchange 2010 sp1 and change the from address
for example i want to block send address [email protected] and send it as [email protected]
Both email addresses existing as users (not alias)
i want to assign the bb*@conto.com email addresses to blackberries and droids
Any ideas?
Regards

As a rule, you cant change the FROM: when sending from clients when using Exchange, except when using POP or IMAP, or two separate mail-enabled accounts that the user has SEND AS permissions for, or if you use 3rd party products such as ChooseFrom:
http://www.ivasoft.biz/choosefrom2007.shtml
If you want to do this from a mobile device, you will need to contact support for that device and ask them if that is possible in an Exchange environment.
P.S. 2010 SP1 is no longer supported.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

PO number range- change from internal to external and then change it back

we have following situation- we had certain issues with the system where most of the data got curreptrd except data relative to procurement for dates March 7 to March 30. We have extracted the procurement data - PR / PO etc for the dates March 7 to March 30 and we want to upload this data in the uncorrupted enviornment dated March 6 using the old numbers originally assigned by the system.
I need to change the configuration for PR and PO number range from Internal to external so we can upload PR and POsfrom March7 to March 30 and then swich the number ranges back to internal so we can enter new data dating from March 31.
What is the best way to do this?
Thanks in advance
Raj

Hi
Create external number range and assign it to theno. range external in that Document type then you can use both internal and external number ranges for that doc without disturbing the system once completed remove the external number for that doc type. while creating the PO give the number you want before saving so that the PO will be saved with the number you had given.
Note: Make sure that you are not using duplicate PO no already assigned
Kiran

Error in changing the number range from the external to the internal no.

Dear all,
             Here is the error found when using the T-Code PA30 for hiring an employee. while changing the number range from external to internal using Tcode PE03, the error found was ' could not find interval for the number range'
Can anyone help me out?

Hi,
     Thanks for your reply.
Please check out what i have done
The number range intervals displayed using T-code PA04 are
No        From                    To                           Current No.               Ext.
1       00000001            00069999                                                  checked
2       00070000           00079999                 70295                       unchecked
3       00080000          09000000                                                   checked
Using T-code PE03, the feature numbkr was changed i.e the return value has been changed from 3 to 2(internal no. assigned)
Error found when performing action using T-Code PA30 is -could not find interval for the number range 2.
Could you please clarify?
Thanks

Change from Internal to External Number range for customer account group

Hi,
We would like to change the number range assignment for a customer account group from internal to external. The external number range assignment check box is greyed out as a few numbers in the range have already been used up. We want to do the internal to external assignemnt change, create a customer of a specific number, and revert the range back to internal assignment. Is this possible?
Appreciate your help.
Ram

Hi,
Please do the below steps:-
(1) Go to XDN1 and click on "Maintain status" button. Note down the current status and change the status to zero. Save.
(2) Again go to SDN1 and click on "Maintain No. Range" button, and change the no. range to external. Save. (if that number range is maintained for multiple years, then make it external for the first yer and for the subsequent years, it will become automatically.)
(3) Then create your customer with specific number.
(4) Then go to XDN1 and click on "Maintain No. Range" button, and change the no. range to internal. Save. (if that number range is maintained for multiple years, then make it internal for the first yer and for the subsequent years, it will become automatically.)
(5) Again go to XDN1 and click on "Maintain status" button. Maintain the current status as the number noted down in step (1) above. Save. (In case number created in step (4) is greater than the number notes in step (1), maintain the number of step (4) in current status.)
Regards,
Gaurav

Survey Rating Scale - change number range order

Using SharePoint 2010 survey and have a requirement to change the rating number range from 1-5 to 5-1 when it is displayed in the survey
Does anyone know if there is a way to do this? I know I can change whether the 1 is high or low with the Range text, but how to actually reverse the order.
I see I can change spacing between questions, modify fonts, etc in the survery using css, but nothing on the rating scale.
Any suggestions would be appreciated.
thanks
VTJeanne

<script type="text/javascript">
//<![CDATA[
var tables = document.getElementsByTagName('table');
for (var i=0; i<tables.length; i++)
if (tables[i].summary == 'Rating Scale Question')
var trs = tables[i].getElementsByTagName('tr');
var ths= trs[1].getElementsByTagName('th');
ths[0].colSpan = 1;
ths[0].innerHTML='5';
ths[1].colSpan = 1;
ths[1].innerHTML='4';
ths[2].colSpan = 1;
ths[2].innerHTML='3';
ths[3].colSpan = 1;
ths[3].innerHTML='2';
ths[4].colSpan = 1;
ths[4].innerHTML='1';
//]]>
</script>
hari

How to determine number range for billing document based on company code ..

Hi Friends!!
can anybody tell me how to determine number range for billing document based on company code & tax departure country if required??
Amit...plz help me!!

Hi Amit,
1. Define different Billing Document number ranges in SPRO -> Sales & Dist -> Billing -> Define number ranges for billing docs. (VN01). Make sure that all are internal number ranges.
e.g.
NO. From number To Number    Current number Ext
A1   0930000000    0930999999
A2   0940000000    0940999999
A3   0950000000    0950999999
2. Define a Ztable ZNUMB_RANGE as follows
Comp. Code | Tax departure country | Billing Doc Type | Number Range
100                IN                               F2                      A1
200                IN                               F2                      A2
200                US                              F2                     A3
3. In user exit RV60AFZZ (USEREXIT_NUMBER_RANGE)
Read table ZNUMB_RANGE for Number Range with Comp. Code, Tax country and Billing Doc.
If found pass this number range value to us_range_intern.
us_range_intern is a standard SAP variable which tells program which number range use to create the current document which is under process.
Let me know if you are clear.
Thanks,
Mandar

How to change number for support message in satellite system

Hi,
When i'm creating the messages in the satellite sytem the messages are generating with internal number range(0000002345) of solman.I would like to change to external number as (9999000000).
Please help me to resolve the issue.
Regards,
Eswar.

Hello,
SPRO > Solution Manager > Basic Settings > Scenario Specific Settings > Service Desk > Check Number Range for Service Desk Message
Check Number Range for Service Desk Message
Use
In this Customizing activity, you check the new internal and external number ranges for the Service Desk.
Activities
1. Select the transaction type SLFN.
2. Choose Goto -> Details.
3. Check the internal number range 01 and the external number range 02 under Transaction / Numbering.
4. Save your entries.
I hope this helps.
Regards,
Paul

How to change the range in numbers?

how to change the range on graph from .0000 to .0 or .00 and ther range on thr graph from 2's to .5

Hi,
Click on Graph Properties icon->Scale Tab -> Click on Vertical axis and specify your range.
Regards,
Dpka

How to change mobile network from At&t to verizon

how to change mobile network from At&t to verizon

What exactly are you trying to do?
You can't "change the mobile network"?
What device model number do you have?
Has it worked previously?

How to change number range from internal to external?

Similar Messages

Maybe you are looking for