How to change Opacity Blending on multiple clips...??

First the problem:
Whenever I open a Premiere v6.5 project, CS4 does a "conversion."
Maddeningly, during this process, it changes the Opacity\Blending Mode of every single clip in the project to "Color" instead of leaving it at "Normal."
Since I am working with Stereo (3D) footage with a different camera on V2 & V1, I always have at least two, and often many more, video tracks (for titles, etc).
This means I have to go through every single clip on every single video track and reset it to Normal before I can proceed with the project! This can be upwards of 500 clips.
PITA!!
1) Does anyone have any idea why this is happening & how to prevent it?
or,
2) Is there a way to change this setting in all the clips at the same time?
Whenever I select multiple clips, no Effect Settings (or whatever Shift 5 is called) appear. Only there for single clips.
TIA,:-)

Do one clip, copy (rightclick) the clip, select all the others and paste attributes.

Similar Messages

How do change the duration of multiple clips with timestreach?

All of the options are grayed out.

AdminID
What version of Premiere Elements and on what computer operating system?
Let us assume Premiere Elements 11, 12, or 13 on Windows 7, 8, or 8.1 64 bit for the purpose of an example.
1. Select all the clip on the Timeline (all at one time) that are being targeted for same duration change.
2. Right click anywhere in the selection, select Time Stretch, and, then in the Time Stretch dialog, change the duration 00;00;0O;00. (hours; minutes; seconds; frames).
Do you have one of those versions that I mentioned, making sure to select all the involved clips ahead of time before going
after Time Stretch?
Selections
If you want all the clips on the Timeline, then Edit Menu/Select All
or
Hold down the Shift key of the computer main keyboard, and, with the mouse cursor, click on each of the clips to be involved in this duration change
or
With the mouse cursor, draw a rectangle around the clips to go into the selection in order to select them
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

How to change Payment Terms in multiple orders at same time?

How to change Payment Terms in multiple orders at same time?
I have got 10,000 Order, I need to change the payment terms for all these Orders.
Can I Know the way out for this.
Regards,
Dantham Conpolwedson
Edited by: Dantham Conpolwedson on Mar 25, 2009 11:18 AM

Hi
There are as many options for that
You can go for
1)MASS t code
2) LSMW (by recording)
3)BDC (by recording)
and the most easiest way is by doing the MASS tcode
goto MASS and enter the object type as BUS2032
execute now select the sales order haeader data and execute and now enter the sales doc from and to range and execute now all the sales dox will be displayed
and from the menu click on select fields and select the terms of payment
now select the terms of payment row and enter the new values and click on carry out new changes
regards

How to change the speed of a clip without frame blending?

Hi,
I changed the speed of a clip to 200%. I expected Premiere to drop every second frame. Instead, there is some frame blending making my progressive footage interlaced. For some reason, the frame blending cannot be disabled by using the Use Frame Blending option.
How can I make Premiere simply dropping every 2nd frame?
Thanks in advance!

In my test, all I need do was right click the clip and make sure Frame Blend was not checked.

How do you change the volume for multiple clips in one go?

Hi all,
Im having some trouble with audio. Im posting this in a rush so sorry in advance if its a bit muddled! Im editing snow reports with a journo piece to camera (track one lapel microphone) with overlay (track two nat sound ).
1. is there a way to only bring in track one only and track two only from the source monitor?
2. Is it possible to adjust the volume on multiple clips that are on the timeline (so that i can bring down the nat sound for all of the overlay track two)
At the moment im bringing them into the timeline and adjusting them individually. I tried lowering the volume on one clip and saving it as a preset but it wont let me.
your help is greatly appreciated
Paul

Duplicate the audio once editing is done. In the Mixer window, apply the Fill Left effect to one audio track, and the Fill Right effect to the other. Then adjust the mixer appropriately.

How to apply Time Remap to multiple clips simultaneously

Quite often after trimming many different clips for a wedding video I will then want the majority of them slowed down to a 50% speed. I know how to apply the Time Remap Speed % change in the Motion Tab, but have yet to figure out how to make the change to multiple clips simultaneously.
Thanks for your help!

You can apply a speed change from one clip to multiple clips by copying the first one, then pasting attributes (option + V, then select speed from the list) onto as many clips as you have selected.
Just be aware that this will ripple your timeline by extending all of your clips. FCP keeps the original out point of the source clip, not the out point of each cut on the T/L.
Tim

How to apply basic motion to multiple clips

Hello!
How do I apply basic motion parameters to multiple clips? ie Scale, center and crop? Do I have to set the parameters for each specific clip or can I apply the parameters to multiple clips at once?
Thanks

I'm going to assume you want to assign the exact same motion tab setting to additional clips.
Set one of your clips as desired in the motion tab
highlight the modified clip in the timeline
type Cmnd-C to copy
highlight the clips you want to have the setting applied to
type Option-V to paste
in the pop-up window uncheck all boxes except Basic Motion
click the OK button

How to change PowerPoint Template across multiple site collections

I am failry new to SharePoint, and my organization has asked me to research how to change a PowerPoint template that is stored on multiple site collections. There are current PowerPoints based on the template and they wanted to be sure those wouldn't be
affected, as well. They want a "quick and easy" way to update the template that the divisions in the company use without manually going into each site collection. A co-worker said she hopes to "replace the current...template at the site
collection and it will modify the available content type when selecting new document."
Any help on how to handle this would be appreciated.

This will really depend how the template has been packaged. If it's a content type, than editing this and making sure that the "update content type" radio is selected will do the trick. Can you ask someone who's made one to show you how they generate
the template. If it's within the New --> XXX Document, than you're in luck
If they're just deployed as normal files within a library, you'll have a much harder time.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

How to change the design of multiple-choice checkboxes

Hello,
i want to change the look of multiple-choice quizzes. Instead of the typical checkbox with checkmark i would like to place a button that changes its color - for example blue for right (activated) and white for wrong (not selected).
I think it should be possible, but I don't know where I can change the look of checkboxes. I Tried it with a hotspot-quiz, but that is not exactly what I'm searching for.
The best solution for me would be a kind of button with mouse-over effect as known from websites (HTML).
Can you please tell me what I have to edit?
Thank you very much.
Boris

Hello and thank you for posting this information. I'm still seeing a number of problems with implementing a workable solution.
For HTML5 only (not Flash), I have changed the image: HTML/assets/htmlimages/checkBox_selected.png to a blue button (118x53 pixels instead of the default 22x22pixels), and as expected the button will still be the same size until I change the code description of the checkbox. I found the CSS description of the checkbox button in: HTML/assets/css/CPQuiz.css and have made the changes to the width and height (see below), and even though the following changes are generated in the output files, they don't have any effect on the button. However, I found that if I changed the 'Project.js' file where it defines the width and height of the checkboxes that this would actually change the values, but this is always re-written over and generated each time you click 'Publish'.
So, I then found some hard-coding in the file: HTML/assets/js/CPLibrary.js (just search for 22px and you'll see that the checkbox description width and height are not being read from the CSS file) and this appears to be where the actual code is coming from that gets generated for output when you click on 'Publish'.
This is not an optimal solution, I feel that I'm beginning to hack around the default code for Adobe Captivate more than I should be expected to do. Is this really what others are doing to make what should be pretty simple and easy changes?
Additionally, I noticed that when I click on my checkbox, the 'checkBox_selected.png' will be drawn, but if I click on it again the 'checkBox_disabled.png' appears to be drawn on top of the previous 'checkBox_selected.png' which is not the behavior I would expect. I want to be able to see what is underneath the button if I click on it again in order to un-check the box and instead it draws the 'checkBox_disabled.png' on top, covering up the default text I need to see!
Below are my changes to CPQuiz.css (which were copied to the 'Published' file, but had no visible effect)
input[type=checkbox]:checked
    background: url('../htmlimages/checkBox_selected.png') no-repeat center center;
    -webkit-appearance: none;
    border: none;
    -webkit-background-size: 118px 53px;
.spanCheckBoxInput
    position: fixed;
    display: block;
    width:118px;
    height:53px;

How to change "capture time" of multiple photos to a specific time?

Hi guys,
For some reason I'm trying to change "capture time" of multiple photos to a specific time.
I know that there is "Edit Capture Time" feature under Metadata.
But when I try to edit multiple photos, it says that "Modify the capture time stored in the selected photos by entering the correct time adjustment for the photo displayed to the left. Other photos (but not vidieos) will be adjusted by the same amount of time". And it really does.
For example,
If A file's capture time is 1/11/2011
B file's capture time is 1/11/2012
C file's capture time is 1/11/2013
I would like to change their capture time to 1/11/2014. All the three files.
But the current "Edit Capture Time" feature of Lightroom just adds three years to each file like this:
A file's capture time -> 1/11/2014
B file -> 1/11/2015
C file -> 1/11/2016
So their capture times remain as different ones. And this is not I want...
What should I do?
I've googled a lot and tried several programs other than lightroom as well, but the "Capture time" recognized by lightroom could not be changed by other programs.
I would greatly appreciate your help.

softcotton24 wrote:
That's why I posted this.
Sorry - I didn't see where you'd mentioned that you'd chosen the correct option, so I thought best to rule that out first.
Anyway, it sounds like a bug, which can be reported here:
http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop_lightro om
In the mean time, you can use exiftool, or try your luck with the exif-write function of the exif-meta plugin, e.g.:
Note: if you use exiftool, you need to save metadata first, make the change, then read metadata in Lightroom, otherwise capture-time changes will be ignored by Lr.
Cheers,
Rob

How to change font attributes on multiple paths at once?

I am trying to change font size on multiple paths at once but as soon as I select them the font options become unavailable (greyed out).
Is it possible to do it?

Willi is essentially correct but I think his message is being drowned out by the allcaps enthusiasm
If you select multiple paths with the Selection tool (the black arrow) then you cannot alter type formatting directly. Seasoned InDesign users rarely manipulate type by direct formatting; instead we apply a paragraph style to all of the type, and then change the paragraph style. If all the text on those paths was marked with the same paragraph style, then you could just change the style.
You could do it other ways, but they're all suboptimal. For instance, if all of your text-on-path was set at 11 points, and no other type was set at 11 points anywhere in your document, you could use Find/Change to specify a Find Format and a Change Format under More Options. If all of the paths were marked with the same Object Style, then you could make a new Paragraph Style and specify it in the Object Style.
But if you drew those paths by hand, then they have the Basic Graphics Frame object style applied (like everything else you drew in the document) and if you didn't style the text then every bit of text has the Basic Paragraph style applied (like every other bit of text in the document). So you're either going to do it by hand, or... you're going to follow Willi's allcaps advice.

Changing the Duration of multiple clips/Gee I thought I knew how?!

Okay folks. I have a group of pictures on the timelime. I need to shorten the duration of all clips. I highlighted the clips, control+click on one of the clips--navigated to duration.
When I change the duration, the computer beeps and returns the time to the orginal clip length of 10:00. I can change an individual clip in this manner but not the whole timeline.
Any ideas?
Thanks for the help.

Never Mind. I had a sequence in my list of clips. Took it out and that solved the problem. Sorry.
Thanks anyway.

How to change the motion of a clip

Windows 7 ultimate
AE CS 4
Footage 1080p 24fps
Gentlemen
A very simple question
How do I change the motion setting of a clip
I mean I have a clip of a girl dancing on a chess floor background
I made duplicates of the same clip ,I changed the outfit of each girl by using effects
Now I wanna change their standing positions , I wanna make it look like many girls are dancing on that chess background , since I am a Premiere user, all I have to do is go to selection track motion and I can put her up and down (dont take me wrong here) by changing the X, Y and few other numbers,
So, how do I move here up, don , left and right
Many thanks.

Mylenium's initial response is correct: select the layer, press P, and adjust the position parameters. As you have also descovered, you can manually change those values by moving the layer within the preview window as well.
These are fundamental basics for using After Effects. You will have much more success and satisfaction using AE if you spend an hour or two with the resources here:
http://blogs.adobe.com/toddkopriva/2010/01/getting-started-with-after-eff.html

Multiple still images imported (how to change timing AND do multiple transitions)

I imported into the project resources many still photos. The defaut time for each seems to be 5.1 second. If I drag them into the timeline, select them all and change the duration there are time gaps between images...how can I scrunch them together easily OR how can I change the default time duration before I drag them to the timeline?
Second...if I have all my photos on a timeline can I set the transition effect on more than two at a time? Can I set the transition for all of them at once (a different query)
Thanks, -bill

I imported into the project resources many still photos. The defaut time for each seems to be 5.1 second. If I drag them into the timeline, select them all and change the duration there are time gaps between images...how can I scrunch them together easily OR how can I change the default time duration before I drag them to the timeline?
When you've selected your still and used the Speed/Duration command, be sure to tick the "Ripple Edit, Shifting Trailing Clips" option in the panel. That will remove any empty space between clips that would otherwise be generated when decreasing the duration of your clips.
Second...if I have all my photos on a timeline can I set the transition effect on more than two at a time? Can I set the transition for all of them at once (a different query)
Yes, though there are two preliminary steps. First, in the Effects panel click the flyout button (that stack of pancakes with the little downward facing arrow) or go to Edit > Preferences > General and select the Default Transition Duration option and change it to your desired setting. Second, in the Effects panel, select the transition you want and right-click it and select "Set Selected as Default Transition".
Now, select your clips/stills in the timeline and go to Sequence > Apply Default Transitions to Selection; the transition you just set up will be applied to all of your clips. Note that, by default, this will add audio transitions as well, if you're using combined video/audio clips (probably not a worry in your case as you're using stills), but you can hold down the Alt key to select just the video or just the audio portions of your clips, if you only want one transition type or the other. You can also temporarily lock any tracks where you don't want transitions before you use the command.
Also, since you're working with stills, you don't have to worry about handles; if you import a still into Premiere, even if its duration is only a single frame, you have an indefinite/infinite amount of frames to use for editing and transition purposes. Video/audio clips are a different story, of course...

How to change the duration of multiple paint strokes

Hello everyone! Newbie here.
I should've set the paint properties to first frame instead of constant. Where properties of multiple clone stamps are easily modified at once, the duration shows as a percentage and so I can't figure out how to reset the duration to the first frame of the clone stamps.
I should've read the paint chapter of the After Effects manual before I made a mess but I haven't found my answer there.
I'll also appreciate any suggestions for scratches and noise removal filters.
Thank your for your help!

edit:
For items already in the timeline, Select the each item in the timeline, right click and select "change speed" from the popup menu. You can not change the duration of a group of slides, only one at a time.
To change images that are already imported but not in the timeline, there are two ways to go - the brute force method and the item by item method.
Brute Force: Delete the stills from the Browser, change the duration of still setting in User Preferences>Editing to what you want, then reimport the stills. They will come in with the new duration. Changing the User Preference setting only affects stills imported after the change, it has no effect on material already in the Browser.
Item By Item: Go to the still in the Browser and change the duration for it. Right click on the time and copy it. Select the next still image time, paste the new time in, rinse and repeat. If you have a lot of stills and they are well organized (ie all in the same folder), the brute force is probably faster.
x
Message was edited by: Studio X to correct factual errors in the original post

How to change Opacity Blending on multiple clips...??

Similar Messages

Maybe you are looking for