How to change organizational unit .

Hi Experts,
I have a rule in which some responsibilities are defined. Could anyone please tell me how to change the values in the Rule like I want to change the persons listed there to someone else.
Also if there is any way to change the organizational structure and what will be the steps.
Thanks
Papiya

Hi
To change rule go to PFAC and make copy of this rule.Later go to edit mode and change it (eg Function module that is used there or values in container tab).
To change rule result you can also in workflow schema change Binding between rule and task (you will find there import parameters that influence rule result).
to change organizational structure (eg in SAP CRM) you have to go to tcode ppoma_crm and make changes.
later launch special report to attach those changes to transport.
Regards

Similar Messages

  • How to assign changed organizational unit to person

    Hi Experts,
    we moved some employees from  one organizational unit to newly created one  in tcode  PPOM_OLD.
    In PPOM_OLD i created new unit ,assign position then assigned employee
    But when i see in PA30 the organizational unit remains same.Even when i observed in PA0001 table i can see two entries for one employee number the  old entry is with organizational unit  where as new one doesnt have organizational unit at all
    Please guide me how can i do changes.
    Thanks&Regards,
    narasimha

    Go to transaction code- PA40
    Enter the date -
    Select the action
    Execute the Action.
    Select the Reason for Action
    Change the position number
    Change the personnel area if required.
    Press Enter and save the record.

  • How to check Organizational Unit

    Hi experts,
    How many ways are there to check the organizational unit of an User? (i need Tcodes or tables to check)
    Thanks in advance

    tables
    V_T527X thru SM30
    PO10 tcode  expert mode
    ppoc_old to create  tcode
    PPom_old change  tcode
    PPOs_old  display  tcode   simple maintianence
    Ppoce  create
    Ppome  change
    Ppose  display       organisational planning and staffing
    Ppsc create
    Ppsm  change
    Ppss display            general structures
    PpmE  change
    PPMS  Display
                                    Matrix Structure
    Edited by: Sikindar on Oct 24, 2008 5:11 PM

  • How to change Org Unit for larg number of emplyees

    Dear Guru's,
    My client has uploaded wrong Org Units while hiring, now that has to be changed for larg number of employees.
    Can any one suggest me how can we do this for larg number of employees?
    Thanks in advance for your kind suggestions.
    Regards,
    Srinivas

    Hello Srinivas;
    By saying uploaded wrong organizational units, do you mean that organizational structure in PPOME is wrong or employee - position assignment is wrong?
    If employee - position assignment is wrong then I suggest you to use batch input program or use LSMW as you have to change it via personnel action - PA40
    If organizational structure is wrong, then do you have correct organizational structure in another system like test or qa?
    If you have correct organizational structure then you can directly transport it from one system to other but if you don't then you first need to correct the organizational structure and then run LSMW or batch input.
    Regards;
    Okan

  • How to change  default unit on Database 11g

    Hi All
    I'm using Oracle Database 11g Enterprise Edition Release 11.1.0.6.0.
    If I define my column:
    USERID VACHAR2(8) --> Default USERID VACHAR2(8 BYTE)
    How can I change default unit BYTE to CHAR as the following
    USERID VACHAR2(8) --> Default USERID VACHAR(8 CHAR)
    Thanks alot
    Thiensu2810

    I have set Database system with the following SQL:
    alter system set nls_length_semantics=char;
    alter session set nls_length_semantics=char;
    But, It does not match.
    And when I insert data, the following error occured.
    SQL> insert into binhtest values('初期化パ');
    ORA-12899: value too large for column string (actual: 12, maximum: 8)
    I've checked value of NLS_LENGTH_SEMANTICS, it is CHAR
    SQL>SHOW PARAMETER NLS_LENGTH;
    NAME | TYPE | VALUE
    NLS_LENGTH_SEMANTICS | String

  • How to Transport Organizational unit created in transcation ppoma_crm

    Hi all,
    I have created, the organizational unit in transaction PPOMA_CRM,
    Now what i want to know, how to transport these organizational units to Quality system. Because there is no transport option in that transcation.
    kindly advice
    regards
    Naveen kumar

    Hello Anand,
            What you said is absolutly correct. I realized that a bit later, those org, structures and Business Partners need to be created in all environment and started doing it.
    could you please clarify one more thing, i have created organization determination rules for sales and service organization determination.
    Since i dont have ABAP knowledge i saved those rules under $tmp package. Now those rules cant be transported.
    Is there any other way to reassign the package and do the transports.
    kindly help..
    regards
    Naveen kumar

  • How to link organizational unit to org. Object type ?

    Hello,
    i want to link an organizational unit to the object type T024L, Does anyone know how i can do this ?
    Thanks a lot

    Hi,
    You need to create assignment between Org object type and org unit. Use txn <b>PFOM - Create Assignments</b> for the same.
    You can then try the std rule 30100012 also.
    Hope this helps.
    Regds,
    Akshay Bhagwat
    PS: Some points would be nice if it helps

  • How to link Organization Units and Entities in Oracle Designer 9i 9.0.2.8 ?

    Hi,
    I am working with Oracle Designer in a project where we need to asses the Business Process Model of the customer, mapping it in Oracle Designer.
    The Customer wants to see the relationship between Business Entity and Organization Units and Processes.
    We are following this approach:
    - define Entity
    - define Organization Unit
    - draw process models with Oracle Designer Process Modeler, defining the single process steps and indicating the Organization Unit who performs that activity;
    - draw a Data Flow Diagram for each Entity with Oracle Designer Data Flow Diagrammer, including the business function we have defined as process steps within the Process Modeler.
    Process Modeler allows us to link process steps to Organization Units, while Data Flow Diagrammer links Entity to business functions ( which are equal to our process steps). So we expect that for the "transitive properties" Organization Units should be linked automatically to Entity.
    At the end, using Oracle Designer Matrix Diagrammer we only see the relationship between Business Functions and Entity and not the one between Organization Unit and Entity .
    In fact, if we open Object Repository Navigator and check the property "Business Unit Entity Usage" of the Business Unit, there is no evidence of the entity related to the business function performed by the Organization/Business Unit.
    Could someone helps us to understand how to use correctly the Oracle Designer Tools ?
    We look forward to hearing from you.
    Regards
    Flavia Ercoli & Rodrigo Silveira

    I would recommend the 10g version anyday over the previous versions. If you use any of the other supporting apps (forms, reports, portal....) your already at a much better release :)
    Is there a reason you would want to use the prior version?

  • How to change order unit in ME22n for particular vendor

    Dear All,
    We have defined ordering unit in material master as "L".
    For other vendors & new PO we get proper ord.unit display.
    But we r not getting in PO of particular vendor.
    How to get order unit in ME22n ? What is the relation of order unit with Vendor ?

    Hi
    Did you ordere the particular material for the vendor concerned already with different Order unit (SKU),  this might be the reason why you are not getting the ordering unit in PO while ordering. Did you maintain the details of conversion in master between SKU & Ordering unit,if yes, then check for Info Record for the material and vendor combination and in the Genaral Data Tab chek for the variable order unit activation if not available then activate it and if the system is asking the conversiondetails enter herr the conversion also. Now if you create PO you will be able to assigne the new order unit.
    Regards

  • How to Create Organization unit with customised code?

    Hi all,
       My business requirement need to create a Organization unit with a customised report.
    That customised report need to be developed in which i will be incorporating the code to create a new orgganization unit in sap
    and also to assign it in the organization structure.
    Please suggest me the Function Module to create it...or any sort of Standard report which is already doing that
    Thanks and Regards
    Sonal Jain.

    If I understand you correctly, you want to create a PROGRAM to create an Organization Unit (IT1000) and it's relation to it's parent Org.Unit (IT1001 with relation A_002).
    Check out program RHCOPY00, and create a Z version adapted to your needs.

  • How to get Organizational Unit of a Master Agreement?

    HI,
    I am trying to retrieve value of Organization Unit of a Master Agreement but I am getting some code: name.
    ownerObj=doc.getDocumentOwnerUserReference();
    ownerHome=IBeanHomeLocator.lookup(session,ownerObj);
    ownerBean=ownerHome.find(ownerObj);
    throw doc.createApplicationException("VENDOR_VISIBLE", "Supplier name is "+
    ownerBean.getOrganization());
    Please suggest.
    Thanks,
    Saloni

    Hi Solani,
    You were getting the error beacuse we don't have any field like org unit in the Contract Document and the method you used is not there in the API's.If you want to access the Master Agreement Org unit in Contract document then you have to get the MA bean and then you can fetch Org unit in your contract document.
    Code as follows:-
    masterBean = doc.getParentIBean();// to get the MA bean
    orgunit = masterBean.getOrganizationalUnitRef(); //this wil give the orunit of the MA
    businessUnitHome=IBeanHomeLocator.lookup(session,orgunit);
    businessUnitBean=businessUnitHome.find(orgunit);
    Hope this will work for you.
    Thanks,
    Ankur Goyal
    Edited by: ankur_goyal03 on Oct 15, 2011 8:23 AM

  • How to Locate organizational unit ?

    hi all!
    I am trying to assign my ZPROFILE  to my organizational unit.
    now the problem is i do not know that is my org unit.is there a way by which i can figure it out.
    any help wud be greatly appreciated.
    thanks
    sachin

    Hi Sachin,
    You have the partner no. with you right.
    Goto the table BUT000 and enter the partner number to get the partner guid.
    <b>Reward points if it helps.</b>

  • How to move Organizational unit in PPOMA_BBP

    Hello,
    I would like to know how i can move Org unit in PPOMA_BBP
    Regards,
    Lina

    Hi. It might be a bit tricky, but if you go to transaction PP01, select org unit and stick the org unit number in, then highlight "Relationships" and press change.
    There is a field called "Priority" at the bottom.
    When you move up and down in rank it is this field that gets changed.
    If you can put in a prioity higher than the place you want it to be in the org structure, it will move.
    I would try this in a test system first to try and get a feel for it.
    Regards,
    Dave.

  • How to change weight units in fitness?

    Hi,
    in the set-up menu for fitness there is a sub-menu to set the weight. My iPod displays the weight in pounds (in big numbers) and kilograms below (in small numbers). I would like to change it, so the main units are kilograms. How it can be changed?
    digoben

    DenB09's answer (though terse) is what you're after. See this page for details:
    "Time-display units"

  • How to Change Handling Unit User Status

    Hi All,
    I am trying to change the HU Status using FM 'STATUS_CHANGE_EXTERN' but its not working.
                 lx_huheader-hu_id  is the Internal Handling unit number.
                CONCATENATE 'HU'
                            lx_huheader-hu_id INTO
                            lv_objnr.           
                CALL FUNCTION 'STATUS_CHANGE_EXTERN'
                  EXPORTING
                    client              = sy-mandt
                    objnr               = lv_objnr
                    user_status         = 'E0002'
                  EXCEPTIONS
                    object_not_found    = 1
                    status_inconsistent = 2
                    status_not_allowed  = 3
                    OTHERS              = 4.
    Please guide me.
    Thanks
    Srinath

    HI...
    add this Export parameter in the call of function module,
               SET_CHGKZ                 = 'X'
    after chef id the objnr is correct.........remember to call the commit work, or BAPI_TRANSACTION_COMMIT after the status change.
    Marco

Maybe you are looking for