How to change original system SID to objects by batch?

Hi, experts
I did system copy and so I want to chage orignal system SID to new system SID.
I checked it is possible to modify in SE03 or using function module 'TRINT_TADIR_MODIFY'.
But problem is objects are alot.
How can I update them easily?
Thanks

Did you perform the post processing in SE06?
Changing the SID can be done in table TADIR, but that won't be supported....
Kind regards,
Mark

Similar Messages

How to change original language of ABAP objects?

HI,
I have created a BADI and an interface in R/3 release 6. I created the BADI in original language German, but by mistake I created the interface in Original langauge English.
Is there a way to change the original language of the interface to German? I tried editing and activating the interface in German logon, but it did not help as teh Original langauge of the interface remained as English.
Is there any SAP report which would help me to change the original language of ABAP objects?
Regards,
Srini.

Hi,
Here's the way out:
Step 0. Delete the object
Step 1. Delete the object directory entry(If it says entry doesnt exist, recreate it - ie. the object dir. entry)
Step 2. Login to the language of choice - In ur case 'DE'
Step 3. Recreate the new object
Voila!!! Original Language changed
Cheers,
Gaurav

How to change original source system of objects at one time

Hi, experts !
I installed extra devlopment server using system copy of orignal
delveopment system.
We have planed that new objects applied to orginal server after developing
finished on extra devlopement server.
The problem is we can not modify or add old objects for specific
package because orignal source system is different
and I know this is SAP policy.
Of course original source server can be changeed on t-code SE03 or
function module TRINT_TADIR_MODIFY
but it should be applied to every objects. This is big job to BC admin.
Is there any solution to possible it at one time?
Best Regards

You can transport all relevant packages from the old to the new development box including a change of the original system using a special transport request of type "relocation of complete package". Check with your system administrators.
Please close your similar post here:
How to change original system SID to objects by batch?
Thomas

How to change to original system of an object

We have moved some sources from one system to another and now the
original system in the customers objects is obviously the old system.
How can I change the original system in these objects? Can anyone tell me
in which tables is this info kept and if there are any standard reports to do this?
Thanks
Martin

Thanks for your answer. No, we did not make a copy, but we have included
all objects in transports, which we imported into the new system.
SE06 sets general system setting. We need to change the information for single objects. Only those customer objects which carry the old system as original system need to be set to the new system. Not the SAP-Objects, obviously. I am talking about Z-Reports, subtypes of business objects, Z-Tables etc.
Bye bye
Martin

Mass change original system for objects

Is there a way to change the original systems for multiple objects at once?
So instead of changing them one by one, can the original system for objects be changed for multiple objects at once?
Kind regards,
Ben

I've checked with the Basis team, but they couldn't help me further.
For the moment we'll leave the objects like they are and Overwrite the originals when transporting.
Kind regards and thanks,
Ben

Not able to change the original system of the object

Hello
BW infosource was created in the system Q01 (test) and transported back to D01 (dev).
I would like to change original system from Q01 to D01 to enable object modification.
I am not able to change the original system of the object in the tran se03 as system is disabled.
Original System          Q01   (grey)
Any solution for this ?
thanks

hi,
before transporting maintain the settings in the Dev system as follows.
Open tcode RSA1 in dev system, from Menu goto -- tools -- Conversion of Logical system Names.
In this maintain the
Original source system                                   Target source system
Technical name of R/3 client of test              Technical name of R/3 client of dev system
This setting has to be maintained while transporting the changes to next system, this ensures that the objects are mapped to the correct source system name on importing and are replicated properly from them.
regards,
Arvind.

Changing Original System and Transport Target System for Objects

Hi Gurus,
I need to do mass transport of all the Infoobjects to newly defined system. Since these objects have different Original system. Its giving me error. Again, for other objects, Transport Target system is QAS, But we want to change it to NBW (A new system to which we want to send transport) . I am able to change package of Infoobjects. Is there mechanism to change Original System and Transport Target for System? Please let me know ASAP.
Regards,
Harpal
Message was edited by:
Harpalsinh Gohil

If you simply edit your original post, it will go to the top of the list. There's no need to post duplicates.
Subjects with a subject of "Urgent" will be filtered out by a lot of responders.
Why not close this thread and bump the other one?
Rob

SAP System is not the original system of the object being edited

Hi All,
We recently built a new system which is Copy of another system.We decomission our old system.Now when ABAPer is trying to edit Z/Y programs in se38 they are getting message "SAP System is not the original system of the object being edited".We already completed all post process after system copy.Client is open and status in Golbal modifiable in se06.
How we can resolve this situation.

Hello Guys,
Thks for your input.
@Vinod,
We rebuild new development system from the exsisting devlopment system and scrap old one.And yes thats true that new system is not the original system where object was created,its a replica of old dev to nev dev with SID change.
@Arjun,
I already check TADIR table and and its pointing to new SID.
@Ashok,
As i said earlier,post intallation is already completed.
Its a problem for developer who's getting some different format of screen when they editing development object ,like, when we perform manaul corretion in abap code through snote.They can see buttons to insert code line,delete line.
Thx,Nilesh

How to change the title of an object in the build order window?

In Keynote '09 v5.1.1 (1034)... How to change the title of an object in the build order window from the default "dropped image" to a specific title?
I'm running the following:
Model Name: MacBook Pro
Model Identifier: MacBookPro2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP21.00A5.B08
SMC Version (system): 1.14f5

Custom names can't be applied to objects in the build list.
They are labeled as either; text, shape, table, chart or the filename of an image

Is it possible to change our system SID and NR after installation

HI TO ALL
Is it possible to change our system SID and NR after installation os SAP r/3,
thanks

Hi,
It cannot be changed after you have installed the SAP system
You have the option to chose before you setup the system ie, during the installation.
Rgds
Radhakrishna D S
Edited by: Radhakrishna D S on Sep 9, 2008 7:08 AM

How to change purchase order's cost center in batch

Dear all :
how to change purchase order's cost center in batch?

Dear Manish :
thanks so much for you reply.
the filed which i wanted to change it's content is cost center (KOSTL) in table EKKN.
i couldn't find it in this t-code when i select fields.

Change Original System

Hello,
I know this can be done, but am having some trouble finding where...
First off, a little background, my company has two systems, one for domestic and one for international. There was a great deal of development done for the international system that the domestic side now wants for themselves as well.
I have transported all of those objects from the Development box of the international system to the Development box of the domestic system, but to complete the process, I now need to switch the original system on all of that development from the international development system to the domestic development system to avoid having to do a repair every time a change is required to this development in the domestic system.
Does anyone know where this is done?
Thank you.
Nick Lyons

I know that our company had to do this also. But I was not involved in the project. The only thing I could find was a program that changes the original system.
Here is the code.
REPORT YCHORIG .
TABLES: SSCRFIELDS, TADIR.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN COMMENT 5(72) AAA.
SELECTION-SCREEN COMMENT /5(72) BBB.
SELECTION-SCREEN COMMENT /5(72) CCC.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK BLOCK WITH FRAME.
SELECTION-SCREEN COMMENT /2(72) DDD.
SELECTION-SCREEN COMMENT /2(72) EEE.
SELECTION-SCREEN COMMENT /2(72) FFF.
SELECTION-SCREEN COMMENT /2(72) GGG.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: A LIKE E071-PGMID.
PARAMETERS: B LIKE E071-OBJECT.
PARAMETERS: C LIKE E071-OBJ_NAME.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN COMMENT /1(72) HHH.
SELECTION-SCREEN COMMENT /1(72) III.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN PUSHBUTTON 3(30) MMM USER-COMMAND DISP.
SELECTION-SCREEN PUSHBUTTON 36(8) JJJ USER-COMMAND PROC.
SELECTION-SCREEN PUSHBUTTON 47(8) KKK USER-COMMAND EXIT.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN COMMENT /1(72) LLL.
SELECTION-SCREEN END OF BLOCK BLOCK .
INITIALIZATION.
AAA = 'This program changes the specifyed object''s original system.'.
BBB = 'The new SID will be the login SID.'.
CCC = 'USE THIS PROGRAM WITH EXTREME CARE!!!'.
DDD = 'Name of R/3 ABAP/4 Development Workbench object'.
EEE = '|      Object type'.
FFF = '|      |      Object name'.
GGG = '|      |      |'.
HHH = 'Example:'.
III = 'R3TR PROG ZLOAD'.
JJJ = 'PROCEED'.
KKK = 'EXIT'.
MMM = 'DISPLAY RECENT ORIGINAL SYSTEM'.
LLL = ' '.
AT SELECTION-SCREEN.
IF SSCRFIELDS-UCOMM = 'EXIT'.
    SET SCREEN 0.LEAVE SCREEN.
ELSEIF SSCRFIELDS-UCOMM = 'PROC'.
    CLEAR TADIR.
    SELECT SINGLE * FROM TADIR WHERE PGMID = A AND OBJECT = B AND
    OBJ_NAME = C.
    IF TADIR-PGMID IS INITIAL.
      LLL = 'THIS OBJECT DOES NOT EXIST'.
    ELSE.
      IF SY-SYSID <> TADIR-SRCSYSTEM.
        TADIR-SRCSYSTEM = SY-SYSID.
        MODIFY TADIR.
        COMMIT WORK.
        LLL = 'THE ORIGINAL SYSTEM CHANGED TO:'.
        LLL+31(3) = SY-SYSID.
      ELSE.
   LLL = 'NO CHANGE: THE ORIGINAL SYSTEM AND LOGIN SYSTEM ARE THE SAME'.
      ENDIF.
    ENDIF.
ELSEIF SSCRFIELDS-UCOMM = 'DISP'.
    CLEAR TADIR.
    SELECT SINGLE * FROM TADIR WHERE PGMID = A AND OBJECT = B AND
    OBJ_NAME = C.
    IF TADIR-PGMID IS INITIAL.
      LLL = 'THIS OBJECT DOES NOT EXIST'.
    ELSE.
      LLL = 'THE RECENT ORIGINAL SYSTEM IS: '.
      LLL+31(3) = TADIR-SRCSYSTEM.
    ENDIF.
ENDIF.
Regards,
Rich Heilman

How to Change Source system type of ECC6.0 in BW system

Hi BW Experter,
   I connected ECC6.0 PRD system with BI7.0 PRD system , the connection is successful,
but the source system type of ECC6.0 PRD is not collect . The ECC6.0 PRD is as a
BW system type in the source system list of bw system .
   I found that Tcode RSA1 has ever been run in PRD ECC6.0 , So I did a connection testing of
ECC6.0 QA with BI7.0 PRD .
     Step 1. Connect ECC6.0 QA with BI7.0 PRD , ECC6.0 QA was as SAP system type in source system list of bw system .
     Step 2. Run tcode RSA1 in QA ECC6.0
     Step 3. Delete connection of ECC6.0 QA with BI7.0 PRD .
     Step 4. Connect ECC6.0 QA with BI7.0 PRD again , ECC6.0 QA was as SAP system type in source system list of bw system .
   I want to know how to change ECC6.0 PRD source system type to SAP .
If it can't been change to SAP ,Is there any impact when ECC6.0 PRD is as bw system type in source system .
Thank you for your help .

I got the soulution from note: 1087980 - ECC Source systems appearing in BI folder
Summary
Symptom
Source system connection for an ECC system appears in the BI folder, rather than in SAP folder, as expected.
Other terms
Wrong folder,RSA1, RSBASIDOC, RSAP_BIW_DISCONNECT
Reason and Prerequisites
Transaction RSA1 was inadvertently used on an ECC system , thereby creating a 'Myself' source system entry in RSBASIDOC table
Solution
This is just a display issue and does not cause any operational issues. Therefore, it need not be corrected, especially if the ECC system in question is used as a BI system as well.
If it is absolutely required that the ECC source system appear in the correct folder, perform the following steps.
1. Check that an entry with SRCTYPE 'M' exists in table RSBASIDOC table of ECC source system.
2. Note the values for SLOGSYS and RLOGSYS. It should be same.
3. Run the function module RSAP_BIW_DISCONNECT in the ECC system.
   NOTE: Never run that function module in a BI system!
4. Enter the following values :
I_BIW_LOGSYS   <RLOGSYS> as noted in step 2
I_OLTP_LOGSYS <SLOGSYS> as noted in step 2
I_FORCE_DELETE <X>
< DO NOT ENTER ANY VALUE IN THE FIELD - RFC target sys !!!!! >
5. Go to RSA1-> Source systems in the BI system connected to the ECC system.
6. Select the ECC source system and select RESTORE in the right click menu.
Now the ECC system should appear in the SAP folder.
If running RSAP_BIW_DISCONNECT results in an error like OTHER_ERROR, please check if a valid RFC connection exists in transaction sm59.
If the myself source system connection cannot be deleted in any case, log a service marketplace message with SAP Support.
Edited by: fang frank on Jul 15, 2009 8:31 AM

How to change the system time in (E-Business Suite)

Hi,
I need to change the system timings in E-Business Suite.
My Database & Application is on different nodes..
How could i change system timings on both...
Thanks,
Alig

Alig,
Changing the OS date/time will have no impact on the data (except for the scheduled jobs at the database and the OS levels). As mentioned in the threads I referenced above, you have to stop the application/database, change the date/time at the OS level, and start the application.
The application is just an interface which connects to the database, so it gets all the data from the database server. However, if you want to change the date/time it has to be done on both nodes (stop all the services first as mentioned above).
Btw, what is the point of changing the date/time because of Ramadan? The business requirement of your client does not make sense (how does it differ from the application/database perspective if you start working at 9:00 AM instead of 7:00 AM for example)?
The steps in the document should be enough, and if you do not trust any of the replies here you could simply log a SR and confirm this with Oracle support.
Thanks,
Hussein

How to change source system in SAP BI

Hi,
In Sap BI we are having a source system ECC1CLIENT100, based on this we developed all the data modelling, now due to some reasons we made a copy of the souce system ECC1CLIENT100 to ECC2CLIENT100 and we removed ECC1CLIENT100 from SAP BI connections, Now what changes we have to do to connect the ECC2CLIENT100 to BI in the place of ECC1CLIENT100, please give me step to step what to do for sucessfull operations, Both the clients are having different IP, SYSTEM ID,
Thanks in advance,

Hi Bazi,
-->you need to maintain RFC to the new source system
-->delete old source system
-->create source system connection from RSA1
--> Run BDLS to point the data sources to new source system. This should be run on both BW and ECC.
You will need to run this BDLS several times
for more info check the below link
How to change the BI source system
http://help.sap.com/bestpractices/crossindustry/businessintelligence/v131/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
Regards
KP
Edited by: prashanthk on Aug 18, 2010 6:22 AM

How to change original system SID to objects by batch?

Similar Messages

Maybe you are looking for