How to change output directory in Template Builder

Hi,
I'm using XML Publisher 5.5. standalone. When I use the Preview-Function in Template Builder to generate RTF output with MS Word, I want to change the directory in which the generated Files are located. How can I do this?
Mirko

The temp files are in:
\XML Publisher Desktop\Template Builder for Word\tmp
I'm not sure why you need to change the preview directory.
You can also use the system-temp-dir property to change the temp folder for run-time (there should be more info on this in the XMLP User's Guide)
\XML Publisher Desktop\Template Builder for Word\config\xdo example.cfg
Brett

Similar Messages

How to change default directory of exe file

I have created a VI that reads a template and writes on the template and saves it to a new file. When i created to an exe file, I would like for this exe to be able to be used on any computer. As such, the directory where i will open my template will change on different computers. Hence I am having this problem of how to change my VI such that it will choose this template in a new computer and set it as its default directory.
I understand that in my own computer, I can simple "set current values as default" so that my VI will always open this file from a particular path. But what i need help with is when i put it on another computer where the particular path would definitely be different. I tried using the config file.vi but I could not understand how it is used.
Please assist me in this. Thanks

Hi Aaron,
Micorsoft suggest to use folders like UserAppData to store files for your own programs.
Put your template in there and use GetSystemDir function to get the UserAppData path...
Or you put the template in the program folder or one of it's subfolder (not recommended by MS) and use a relative path to load it...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to configure Output Directory at Jobs

Allo.
I am quite new in IR eventhough I played with FR for months already.
I need to set a BQY job to run every morning and inside the job has multicycle things. One of it is to export the processed BQY into my drive D:\\InterativeReporting\. Now, I manage to go through until the job parameter -> modify cycle -> process option and the last page shows me to use Output Directory.
From the docs I know that this Output Directory need to be configure manually but it's not written in any docs!
So, I had done;
1. checked the documentation of HBI (hs_user.pdf, hs_admin.pdf)
2. checked IR users docs
3. Checked FR & Prod Reporting docs
4. hoping it will work like FR with it's external directory where we need to change a bit at the scheduler.properties and go through all .properties under BIPlus/Lib/
5. sacrifice my fried chicken lunch to nearby kitten
Does anybody knows how to configure the output directory? Please let me know. I can't afford to keep sacrificing my lunch..
Thanks!
Daniel.

Hi Guys,
Yeah, I found it at the Developer Guide and follow the direction there. Spent entire morning to try it and it works!
However, it should have been faster using the Physical Resources feature available at Workspace! But I got good lessons there with java -after numerous hair pulling experience and all zoo words shouting. LOL.
I got to bounce to Singapore last week and I left my laptop at my apartment, sorry for late reply and thanks guys!
Daniel.

How to change read-directory when using file adapter

Hi, I'm deploying BPEL process to read files from a directory. I want to change the directory where to read dynamically. This can be achieved by using a file header variable. I know how to do this. But, the problem for me is that I can not find a place to assign this file header variable a correct value. The first step in my BPEL process is the receive-step and this has to be the first step. I wanted to place the assign-step before this step but this makes the BPEL process invalid. First step has to be a receive or a pick-step. So, now I have a dilemma! Anyone an advice on this?
Thanks in advance.

Maybe you can use this information :
http://otndnld.oracle.co.jp/document/products/as10g/1012/doc_v3/integrate.1012/B14448-01/html/app_trblshoot.htm
A.3.3 Common User Errors explains something about the fileheader messages

FTP adapter - how to omit output directory

Hi,
I am trying to FTP a file to AS400 server, using the FTP adapter in 10.1.3.1
My requirement is to not specifiy the output directory (I need to FTP in my $HOME directory, where I get to, once I logon).
The GUI wizard does not allow you to omit output directory, so I put a logical name, andd then in bpel.xml I try to omit the value (assuming that it would then default to the home directory). But it does not work this way, when I deploy it it puts a null for the logical name (seeing a missing value), and then tries to search for directory named 'null' on the server.
I tried using '.' or '..' but in vain...
Any clues, how can i work-around this ?
Thanks.

you can set the destination folder at runtime using the ftp adapter outbound header. But you have to specify some folder name.
hth,
~ronen

How to change Site Share mail template in SharePoint online (Office 365)

Hi,
I want to change the default mail template used in SharePoint Online (Office 365) which is as follows
I want to change the logo of microsoft with my custom logo and message below that logo.
How could i do that?

in Office365 SharePoint Online, if you wan to customize the alert template you need to customize the Alerttemplates.xml under 14 folder on Online server, but it is not permitted, check this article you
also have seen.
You can also post this question related SharePoint Online in dedicated Office365 SharePoint Online forum, you can get a better assistance there,
http://community.office365.com/en-us/forums/151/categories.aspx
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/0d31bb5d-d46b-425a-9f48-6100404b95d8/sharepoint-online-custom-alert-emails?forum=sharepointcustomizationprevious

How to change temp directory (i don't want c documents & settings) in creative zen to

Hi
i have zen touch 40 gb and i want to change temp directory from c:\documents and settings\......... to what i want to
how to do it's

Both the variable TEMP and TMP should be defaulted to the Local Settings\Temp directory. Is that not the case?
If they are just change them to where you want.

How to change the font in query builder window in Reports 6i?

Hi
I am facing the old problem again and again, which is I can not find any way to change the font in query builder window in Reports 6i. The current font is so bad for alignment and ordering each part of SELECT statement. Is there any way to change this to COURIER NEW for example?

No, but I suggest using a different editor which does allow a different text option and just pasting it in.

How to insert a Chart using Template Builder for Word 2007

Hello,
I am trying to insert a chart in my report, but the OK button in the Chart dialog box is disabled. I am able to move the data but OK button would never become available.
Does anybody knows what happend?
I' using BI Publisher 10.1.3.4 and Word 2007
Any help would be really appreciated :)
Regards,
Blanca

Hi,
Probably this will help you.
Uninstall the template builder for word and restart you system and re-install it.
Because this is add in component in MS Word.So some times this installation is not perfect.Try it once.
I hope this will work

PXIe6556 - How to change output voltage during the generation?

I would like to know if is possible to change the output voltage (data lines) during the generation?
1. Start Generation - Vout=1V
2. Change output voltage without stop the generation to Vout=1.2V
3. Change output voltage to ....
Tks
Solved!
Go to Solution.

Hello engfpe,
Take a look at the example bellow.
In this case, it's being generated a waveform, but you can change all that process for a simple constant.
Regards,
Pedro Ivo da Cruz
Engenharia de Aplicações
Attachments:
Voltage (non-regeneration) - Continuous Output.vi ‏72 KB

How to change the default print template for broadcast PDF Export

Hi,
I have currently designed a print template for printing purposes and use this as the template for the print button(Export to PDF),if i were to click on this button the output pdf is the desired PDF. But if i were to broadcast the template with output format as PDF it picks the layout of the current template, how do i set broadcast to pick up the print template also???
Further how to insert a page break in a PDF print template.

Hi Nagesh,
These setting are for
1.Adhoc Template for Queries
2. Adhoc Template for reports designed through report designer
3. Template for query precalculation
4. Template for displaying broadcasting wizard.
When we use broadcasting from query designer to email PDF's the system uses 0QUERY_TEMPLATE_BROADCAST_PDF.
From WAD the system uses the current template layout as PDF Layout.
P.S: OSS note 1054460 -<b>Depending on the BI object type and possibly other criteria, different Web templates are used in BI broadcasting to generate PDF (and PS or PCL) formats:</b>
<i>For Web templates: the Web template itself is used</i>

How to change a 3 column template to a 2 column template?

I'm currently working on this website.
For this website, I designed a page and saved it as a template with the editable regions being the leftcolumn, middlecolumn and rightcolumn divs. I then created each page using that template.
If I wanted to change just the home page from a 3 column layout to a 2 column layout, what is the best way to do this? I know how to make a 2 column site, I just need help with how to "unlock" the template so I can modify the code.
Would I need to open my template file, save it as template2col (or something similar) and make the changes there, then create a new home page using that template and saving over the index file?
The only other way I can think of making changes like this would be to copy the code, paste into wordpad, remove the template coding and then paste back into Dreamweaver. I'm sure this is not the proper method so I thought I would ask those who know much more about working with templates than I do.
Thanks in advance for your advice

I suggested 1 template per layout because it's a practical approach that is simple enough for anyone to utilize. You don't need to be an expert with CSS. Also, this method can withstand any CSS layout you care to use -- even the DW starter pages.
While Murray's approach is sound it will require some careful pre-planning. Not all layouts are built the same way. Choosing the right framework and having the CSS skills to work with it are essential.
Use whichever methods fit your coding skills and those of the person(s) who will be maintaining this site.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to change Host directory location?(Problems with host and ed)

Hi I'm having a problem with the commands Host and Ed. The problem being that when I run them they send back an error saying
SQL>host
/bin/gnome-terminal: No such file or directory
or
SQL> ed
Wrote file /home/joe/Documents/editfile.sql
/bin/gnome-terminal: No such file or directory
The problem is that /bin/gnome-terminal is not the correct location for my terminal directory, /usr/bin/gnome-terminal is. Are there any suggestions how I can be able to change it? I'm running SQLPlus 11.2.0.1.0 and I'm using ElementaryOS(made from Ubuntu). Let me know if there is any other information needed to help fix this.

This is not a SQL or PL/SQL language question and thus off topic. As it is Linux o/s related, I think it is better suited for the Oracle Linux forum space.
My guess is, from the little info posted, that your TERM environment variable is not correctly set.

How to change output resolution?

Hi!
I have a 13" MacBook Pro, and am using the Dr. Bott Mini DisplayPort to HDMI Adapter Pro with Optical Audio to connect to my Samsung LE22B47 TV.
The resolution of the TV is 1366x768, but the best output resolution for it my Mac offers is 1344x756. It's ok, but it's not great.
How can I change the output resolution so it fits the screen perfectly? I've heard about ScreenResX - is that any good and easy to use?
Thanks!

I've heard about ScreenResX - is that any good and easy to use?
Try it and find out

How to change output video resolution. I have 1920x1080 video but sharing from FCPX only allows 640x480. I want 1920 output. How can I resolve this?

I have 1920x1080 video file that I edited. When I attempt to share the edited file from FCPX, it only allows 640x480 output resolution. I want 1920 output. How can I resolve this?

Hi,
Final Cut will output the video at the resolution of your project's timeline.
You can change the settings and scale your project up though by adjusting the sequence settings and then, if necessary, copying and pasting attributes to scale up the sequence.
I had this question before and made a video explanation of how to re-scale a sequence here - https://www.youtube.com/watch?v=***9d-rHsKo&feature=youtu.be .
If you have any more questions about this then just drop me a message here.
Cheers,
Ben

How to change output directory in Template Builder

Similar Messages

Maybe you are looking for