How to change PA30/20 main header?

Dear all,
Does anyone know how to change the main header of transaction PA30/20?
Thanks a lot in advance!

Hello Federico
In SPRO go to Personnel Management under that Pesonnel Administration
Under that "Customizing User Interface" in that select Change Screen Header.
or you can directly go to sm31 enter table name as t588j & maintain.
in spro you can go thru documentation which may help you out.
reward points if helpful

Similar Messages

Can any one tell me how to change the current row header in FB1LN tcode

Hi,
can any one tell me how to change the current row header in FB1LN tcode.
I want to show input date also in the layout.
Regards
Mave

Hi
I know two ways:
- transaction obvu: here you can insert new fields, but only if these fields are included in certain table (like BKPF, BSEG, BSIS.....
- if your field isn't included in those table, you have to modify the structure RFPOS and manage it in the BTE 1650. After updating RFPOS you have to run the program RFPOSXEXTEND to update the structure RFPOSXEXT.
Max

How to change Data in SOAP Header

Dear friends,
We are facing a problem with IDOCs. We have a scenario where in we are sending IDOC from a logical system XXXCLNT040 to another one XYZCLNT004 using XI3.0 SP10.
Now the problem is that we are simulating a situation wherein system XXXCLNT004 sends PORDCR1 idoc to XI and then XI send it to XYZCLTN004 which should return an acknowledgement to be sent to "just" XI and then to some third system not the original sender.
Now, the problem is that we changed the mapping of the IDOC field SDNPRN to point to XI logicalsystem so that the receiver sees that message is sent from logical partner XI and not from XXXCLNT004 but when I check the idoc in we05 of the receiver side it still has partner XXXCLNT004 instead of XI and it seems that it takes it up from the SOAP message header data.
Is there anyway we can manipulate this so that we can change/modify the sender logical partner information during runtime? or anyother suggestions.
Thanks & Best Regards,
Manish

Hi Manish -
You can't map the 6 sender and receiver control record fields (partner, port, and function) and have XI pick them up. See note 728792 for the fields that you can map. You can map them but they will be ignored even if you choose "Use control record values from payload". You need to use other methods. See note 792333 for the options.
Also check out the document "How To Sample IDoc Scenarios within XI3.0" which is available in the How-To section for XI 3.0. This will give you a number of scenarios. Drink a lot of coffee before you read this document.
This is definitely the most confusing part of XI IDoc processing so set aside some time to figure it out.

How to stretch background image, How to change show detail item header

Hello all I have a few questions I would like to pose humbly to your collective wisdom, FYI I use Jdeveloper 11.1.3 and ADF Fusion
First, how do I stretch the background Image? I have a background image in a show detail item but it is very small. 400 by 400. Thing is it's just a pic of the color red gradually moving from bright to dark in the image. So stretching it should not make it look horrible, but also repeating it makes it look silly, because you have 50 little images of dark red to bright red, instead of one big image of dark red to bright red. Can this be done and how?
Secondly how do I change the header of the show detail item in a Panel Accordion? I have 8 Show detail items, in the middle of my page and the user can click and switch between which one is open, which makes for a nice effect, but I would like to give each of the show detail items a particular color. I did this with the backgrounds but I can't do it with the header, which are always visible, while only one background is visible at a time. I tried using the skinning technique but I wasn't able to change the header (I changed the background so the skinning was done correctly). I used
af|panelAccordion::header
color: blue;
font-family: Arial, Helvetica, sans-serif;
background: Maroon;
background-color: Maroon;
}Because I read in the Fusion Guide (or somewhere) that the show detail item cannot be skinned and therefore doesn't have a property like af panel Accordion.
Can it though be achieved through some other means?
Third when I drop the data control on the page and if I pick search form, why can't I use the CreateInsert button? Why can't I use the form to Create new rows? It keeps giving me some type of error, like Row is out of bounds or something? Is that some mistake with my database, or page, or is it not possible to do it like that?
I welcome your words of guidance and also happy new year Huzzah!!!
Edited by: Dino2dy on Jan 4, 2011 2:01 AM

Thanks I haven't really had time to play around with this, as I have other concerns, but I do plan on coming back to it, and it is one of the things about ADF that really is bothersome. Creatively it means I can choose between 2 styles when making an app Blaf Rich and Fusion (the other ones are just worse versions of the two) while I will concede that the superb out of the box functionalities and things I can do declaratively probably mean I won't have a Dreamweaver type freedom of design I thought there might be a way to do some of these custom design changes.
A few questions though
When you skin the accordion are you able to propagate the changes to show detail item headers? Because that is one thing that I really want to change, just the color of the headers but I was unable to do so.
Also there is a component that is not part of a panel accordion or panel tabbed called panel box. Again I changed the backgrounds to great effect but I need to change the panel header and in this I failed.
Granted I used the css color attribute for both not a picture so maybe that is the reason. Just wondering if you succeeded.
Cheers

How to change appearance in Safari header?

How do we increase the font size (File Edit etc)?
How do we increase the boxes at top right (Reduce, Full Page, Close)?
How do we change the color of the header to something more readable?
How do we add a tab creater, like in Firefox?

Coach,
1. Under the "View" menu at the top click "Customize Toolbar" to add text size to the toolbar. Or you can hold Control and "+" to increase size and Control "-" to decrease size.
2. For window size first (Click and hold) drag the bottom right corner to the size you want. Then click on the square in the upper right (Between the "__ and the "X" to increase to full size.
3. Not sure you can change color
4. For Tabs go to: Edit>preferences> tabs (which also lists the key shortcuts for each function)

How to change datasource viewobject main query in .jsp

Hi i have datasource DataSource viewobject="test"
now in .jsp page i need to change it main query and after some things again back to default how i can doo it ?
Thanks for tips!
ID.
Jdeveloper Studio Edition Version 11.1.1.6.0
ADF Business Components
11.1.1.61.92

if you want to change where clause or modify the whole query look here
Changing the WHERE clause or VO Query at runtime in Oracle ADF | Techartifact

VF02 how to change Posting status on header tab

how can i change posting status in vf02. I have changed billing date from last month to current month. On the header tab there is posting block ( it its greayed out righ now ) - Error in Accounting interface. How can i remove that ?
Vanbills.

Hi,
1. Check Your Customer master xd02 - Sales area Data - Billing tab - Account Assighment group of Customer
2. Cechk your Material master mm02 - Sales Org2 - Account assighment group of Material
3. Check you Biling document vf02 - Header - header - Accounting data - Account Assighment group (Customer)
Item - Item detail - Accounting - Account Assighment group (Material)
4. Check Account determination -VKOA - Proper G/L Account maintained or not if not then try to correct them
5. After correcting all the above steps Goto Vf02 enter Billing doc. No. then click on Realse to Accounting or Press Shift + F4
Regards,
MH,

ALV GRID: How to change Subtotal and Main total values in standard row

Hi Experts,
By using SORT-SUBTOT = 'X' and FIELDCATALOG-DO_SUM    = 'X', I will get subtotal and Main total.
My requiremnt is I need be calculate values manually and pass the calculated values to subtotal and maintotal.
is it possible in ALV GRID?
By adding extra row we will do this but I am looking standard subtotal and maintotal row change.
Thanks in advance,
Mahe

Hi,
With function REUSE_ALV_GRID_DISPLAY you cannot do this.
It´s possible if you create a class inherited from cl_gui_alv_grid and rewrite the method set_data_table, you can do this. Like:
CLASS xgrid DEFINITION INHERITING FROM cl_gui_alv_grid.
PROTECTED SECTION.
    METHODS: set_data_table REDEFINITION.
ENDCLASS.                    "xgrid DEFINITION
CLASS xgrid IMPLEMENTATION.
METHOD set_data_table.
* ....MODIFY data_table ...
    CALL METHOD super->set_data_table
      CHANGING
        data_table = data_table.
ENDMETHOD.                    "set_data_table
ENDCLASS.                    "xgrid IMPLEMENTATION
DATA:    grid TYPE REF TO xgrid.
CREATE OBJECT custom_container EXPORTING container_name = mycontainer.
CREATE OBJECT grid EXPORTING i_parent = custom_container.
CALL METHOD grid1->set_table_for_first_display ...
Best regards,
Leandro Mengue

How to change the file main.html in catalyst?

My Web Hosting can not accept files with main.html, only with index.html. How to rename the file in Catalyst? Please do not tell me I have to go to the builder to do this.
here is the link: http://www.insight-gd.com and see what comes up.
thx
Mike

chris, I'm in open war with the people from my server hehehe, they say that it is possible to accept the domain main.html. But my question is if I return the letter M by m, will not interfere in other files?
thx
Mike

How to change report attributes like heading, sort etc programmatically

Some of the columns from a classic reports using pl/sql as region source should be sortable. Is it possible to change this attribute (sort = yes) using JavaScript or APEX API?
David
Edited by: david on Sep 6, 2011 11:56 PM

There is something I don't understand here. Why do you need to point at the sxd? What is changing? Like I mentioned before. If the contents of the xsd change, all the report will do is - at best - drop the changed fields so you will be missing data. Perhaps some of the following will help;
[Crystal Reports Guide To ADO.NET|http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/401c4455-a31d-2b10-ae96-fa57af5aec20?quicklink=index&overridelayout=true]
[Crystal Reports For Visual Studio .NET Reporting Off ADO.NET Datasets|http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/2091d0c3-da1d-2b10-22be-a3426b183f75?quicklink=index&overridelayout=true]
[Crystal Reports For Visual Studio 2005 Walkthroughs|http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23?quicklink=index&overridelayout=true] (page 332 on).
Ludek

How to change color in table header

I have a table model like below I can change column colors (background or foreground ) but I couldn't change table headers color in my application . Basicly I want to change color of "Grup Adı","Kişi Sayısı" column headers.
Please help
thanks
class MyTableModel extends AbstractTableModel {
public String[] columnNames = {
"Grup Adı","Kişi Sayısı",
public int getColumnCount() {
return columnNames.length;
public int getRowCount() {
return data.length;
public String getColumnName(int col) {
return columnNames[col];
public Object getValueAt(int row, int col) {
return data[row][col];
public Class getColumnClass(int c) {
return getValueAt(0, c).getClass();
public boolean isCellEditable(int row, int col) {
return true;
public void setValueAt(Object value, int row, int col) {
if (DEBUG) {
System.out.println("Setting value at " + row + "," + col
+ " to " + value
+ " (an instance of "
+ value.getClass() + ")");
data[row][col] = value;
fireTableCellUpdated(row, col);
if (DEBUG) {
System.out.println("New value of data:");
printDebugData();
}

You have to implement a TableCellRenderer and affect it to your columns with:myTable.getColumnModel().getColumn(0).setHeaderRenderer(myTableCellRenderer);

How to change "previous iTunes library" header after choosing and old library

This worked for me on windows vista ultimate:
- Open itunes with shift press down
- Create a new library, by default, it is created at C:\Users\"your user"\Music\iTunes\iTunes
(different location from where it is originally), close iTunes
-Now remove the 4 files created on C:\Users\"your user"\Music\iTunes\iTunes
- Locate C:\Users\"your user"\Music\iTunes\Previous iTunes Libraries ; note the added date to the files*
Note: if you have more than one previous version of the library, Note that it comes on groups of 4 check the size of the files and choose
- Copy and paste those 4 files to C:\Users\"your user"\Music\iTunes\iTunes, where the new library was created
- *Remove the added date to the 4 files (make sure there is no space between the . (dot) dividing the extension and the word library on each file.
- Now, open iTunes back again and salut your normal "iTunes" header

Here's a post by forum regular Zevoneer that will help you
http://discussions.apple.com/message.jspa?messageID=6850628#6850628

How to set the default screen header structure of PA30?

Hi,
I am not talking about the screen header of a particular infotype, e.g. IT0002. I have managed to change the header for any infotype by changing the structure of relevant screen header modifier.
The question is, how to change the screen header at the initial screen of PA30?
Because all settings in table V_582A_B are with an infotype number. No idea about how to change the default sreen header.
thanks in advance.

PA20 / PA30 Initial screen always maps to screen header '00' even if it's not in V_582A_B. Therefore, if you have an infotype currently maps to screen header '00' and plan to have initial screen header to be different than the header of this infotype, you'll need to re-configure this infotype to map to a different screen header.
Rgds.

How to change the header and footer in the Section Breaks Next Page using OpenXML?

I have a word document file in which I added a Section Break of Next Page, now I want to change the header and footer of that page.
Scenario of example, I have a doc file which has four pages with headers and footers and added fifth page in the section break next page, I want to change the header and footer of the fifth page only. This is achievable manually by deselecting the Link to Previous
button in the Word Application but I don't know how to change it using XML?
My code that adds the new page in the section breaks is:
class Program
static void Main(string[] args)
string path = @"C:\Riyaz\sample.docx";
string strtxt = "Hello This is done by programmatically";
OpenAndAddTextToWordDocument(path,strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
using (DocX document = DocX.Load(@"C:\Riyaz\sample.docx"))
document.InsertSectionPageBreak();
Paragraph p1 = document.InsertParagraph();
p1.Append("This is new section");
document.Save();
Please help.

Here is the sample for your reference:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using DocumentFormat.OpenXml;
using DocumentFormat.OpenXml.Packaging;
using DocumentFormat.OpenXml.Wordprocessing;
namespace WordAddNewFooterHeader
class Program
static void Main(string[] args)
string path = @"E:\Document\TestHeaderandfooter-Copy.docx";
string strtxt = "OpenXML SDK";
OpenAndAddTextToWordDocument(path, strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
// Open a WordprocessingDocument for editing using the filepath.
WordprocessingDocument wordprocessingDocument = WordprocessingDocument.Open(filepath, true);
MainDocumentPart part = wordprocessingDocument.MainDocumentPart;
Body body = part.Document.Body;
//create a new footer Id=rIdf2
FooterPart footerPart2 = part.AddNewPart<FooterPart>("rIdf2");
GenerateFooterPartContent(footerPart2);
//create a new header Id=rIdh2
HeaderPart headerPart2 = part.AddNewPart<HeaderPart>("rIdh2");
GenerateHeaderPartContent(headerPart2);
//replace the attribute of SectionProperties to add new footer and header
SectionProperties lxml = body.GetFirstChild<SectionProperties>();
lxml.GetFirstChild<HeaderReference>().Remove();
lxml.GetFirstChild<FooterReference>().Remove();
HeaderReference headerReference1 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = "rIdh2" };
FooterReference footerReference1 = new FooterReference() { Type = HeaderFooterValues.Default, Id = "rIdf2" };
lxml.Append(headerReference1);
lxml.Append(footerReference1);
//add the correlation of last Paragraph
OpenXmlElement oxl = body.ChildElements.GetItem(body.ChildElements.Count - 2);
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
SectionProperties sectionProperties1 = new SectionProperties() { RsidR = oxl.GetAttribute("rsidR", oxl.NamespaceUri).Value };
HeaderReference headerReference2 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.HeaderParts.FirstOrDefault()) };
FooterReference footerReference2 = new FooterReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.FooterParts.FirstOrDefault()) };
PageSize pageSize1 = new PageSize() { Width = (UInt32Value)12240U, Height = (UInt32Value)15840U };
PageMargin pageMargin1 = new PageMargin() { Top = 1440, Right = (UInt32Value)1440U, Bottom = 1440, Left = (UInt32Value)1440U, Header = (UInt32Value)720U, Footer = (UInt32Value)720U, Gutter = (UInt32Value)0U };
Columns columns1 = new Columns() { Space = "720" };
DocGrid docGrid1 = new DocGrid() { LinePitch = 360 };
sectionProperties1.Append(headerReference2);
sectionProperties1.Append(footerReference2);
sectionProperties1.Append(pageSize1);
sectionProperties1.Append(pageMargin1);
sectionProperties1.Append(columns1);
sectionProperties1.Append(docGrid1);
paragraphProperties1.Append(sectionProperties1);
oxl.InsertAt<ParagraphProperties>(paragraphProperties1, 0);
body.InsertBefore<Paragraph>(GenerateParagraph(txt, oxl.GetAttribute("rsidRDefault", oxl.NamespaceUri).Value), body.GetFirstChild<SectionProperties>());
part.Document.Save();
wordprocessingDocument.Close();
//Generate new Paragraph
public static Paragraph GenerateParagraph(string text, string rsidR)
Paragraph paragraph1 = new Paragraph() { RsidParagraphAddition = rsidR };
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
Tabs tabs1 = new Tabs();
TabStop tabStop1 = new TabStop() { Val = TabStopValues.Left, Position = 5583 };
tabs1.Append(tabStop1);
paragraphProperties1.Append(tabs1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = text;
run1.Append(text1);
Run run2 = new Run();
TabChar tabChar1 = new TabChar();
run2.Append(tabChar1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
paragraph1.Append(run2);
return paragraph1;
static void GenerateHeaderPartContent(HeaderPart hpart)
Header header1 = new Header();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Header" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
header1.Append(paragraph1);
hpart.Header = header1;
static void GenerateFooterPartContent(FooterPart fpart)
Footer footer1 = new Footer();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Footer" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
footer1.Append(paragraph1);
fpart.Footer = footer1;
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to change header and footer in login page in oracle apps r12

Hi all,
how to change header and footer in login page in oracle apps r12 and login button background color, please help me
thanks
saran

how to change header and footer in login page in oracle apps r12 and login button background color, please help meTips For Personalizing The E-Business Suite R12 Login Page (MainLoginPG) [ID 741459.1]
How to Personalize Login page in R12? [ID 579917.1]
R12 Login Page: How to Personalize the Logo ? [ID 849752.1]
Thanks,
Hussein

How to change PA30/20 main header?

Similar Messages

Maybe you are looking for