How to change partition table type

I want to change my windows 7 partition table type, but I don't know anything about computer, is there any simple ways to do that? Someone recommend me Easeus partition master, which is a free partition software, but I don't know this kind of software,
any advice?

Hi,
You can use diskpart command to convert partition table type.
Change a GUID Partition Table (GPT) Disk into a Master Boot Record (MBR) Disk:
http://technet.microsoft.com/en-us/library/cc725797.aspx
Convert a MBR Disk to a GPT Disk:
http://www.sevenforums.com/tutorials/26193-convert-mbr-disk-gpt-disk.html
Note Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Thanks!
Andy Altmann
TechNet Community Support

Similar Messages

How to Change S012 Table Structure ..?

Hi MM Experts,
How to copy and how to create new structure and new caracterstics and MAterial type from table S012 .
T-code for execute MCE1 .
How to Change S012 Table Structure ..?
Regards,
Anthyodaya.
Edited by: anthyodaya Reddy Nagaram on Jul 7, 2010 12:44 PM

Anthyodaya,
Values? Your newly created infostructure will have no data until you define how to update the underlying tables, and then execute the update.
You need to be a bit more specific. Are you saying that you attempted a 1-to-1 copy of S012 into a new structure, and you got a failure? What failure? What error message? If you have saved your new infostructure, you can run the consistency utility to see what if anything is missing/misconfigured MCSCHECK.
If you have no experience with infostructures, I suggest you enlist the services of an experienced person to assist you. Especially if you intend to implement non-standard characteristics and values, this can be a complex task.
SAP help in this area
Creating new IS
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/3754f7449a11d188fe0000e8322f96/frameset.htm
Purchasing Info system
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/375504449a11d188fe0000e8322f96/frameset.htm
Rgds,
DB49

How to change the paper type in printer settings?

Does anyone know how to change the paper type in printer settings? I'm trying to have the ability to change it to photo paper from Photoshop Elements. I can't find the option in printer settings or through Elements. I'm assuming I could save an additional printer setting for photo printing, but can't find how to even select a different paper type.
thanks!

It would help to know which OS you are running as the answer will be different if it's Lion or the previous OS's. You are not running iOS 5.0.1 on your MacBook Pro so provide the correct information.

How to change the document type while creating a PO by ME59N

Hi,
I have 2 groups of PR's, for group one the document type is picked as NB and PO is created and for the group 2 it should pick as XYZ and PO should be created using ME59N tcode.
How to change the document type for group 2 in ME59N? Which user exists to use to change the document type while creating PO in ME59N?
Can any one suggest me.

Hi,
There a config area, where you can define default PO doc types for a particular Pr doc type. If you maintain the settings properly there, then your requirement can be fulfilled.
SPRO->IMG->MM->Purchasing->Purchase requisation->Define doc types.
This will serve your purpose.
Thanks,
Srinu

How to change the billing type Rv to DG

Dear all,
when ever we are doing the return order to a sales we will create a customer credit memo through the VF01 T-code.where billing type will be customize one that is credit memo..
once we save that the in customer G/L we are getting the document type as RV instead of DG.
please tell me how to change the document Type in customer Ledger.
regards,
chethan

Hi,
Just to draw your attention that DG is doc.type used to issue credit memo from FI (t.code FB75), where it does not involve the inventory movement.
Whereas the credit memo generated from OTC cycle (i.e.VF01) involves inventory movement. Ideally, both of these types of credit memos should have different doc. types, so that users can distinguish the returns based on doc. types later on.
So, after explaining the above, please check with your business thoroughly if they really need to use DG instead of RV. I would suggest to create new doc. type 'ZC' and set up through VOFA.
Thanks,
Nirav

How to change the file type from IMOVIE PROJECT to other types of file

how to change the file type from IMOVIE PROJECT to other types of file??
thank you very much for your help=]

I am not sure what you mean, but once you make a project. Then go to the share menu and you can export the project to iDVD, itunes, mobileme, quicktime.
Share export quicktime movie will allow you to export to a variety of codecs. What specific export are you looking to share the movie in? What is the final source that the movie will be displayed?

How's this partition table for my server?

How's this partition table for my server? Web/DNS/DHCP/Mail Server.
hdd1: ~8gb total
/boot - 100mb
swap - 1gb
/ - rest of drive
hdd2: ~155gb total
/var - whole drive
This is a Compaq ProLiant 5500 server with 10 drives. Will most things be installed inside /var or what?

Zetsumei wrote:Web/DNS/DHCP/Mail Server.
Web = /srv
DNS = /var
DHCP = /var
Mail = Depends which package you use. I use postfix and told it to use /srv
I would half your swap, reduce /var and put the extra space into /srv
Also create a separate /tmp and /home to prevent accidental or deliberate DoS attacks by filling your / partition
Here's what I use on my Web / DNS / FTP server:
Filesystem Size Used Avail Use% Mounted on
/dev/xvda 493M 176M 317M 36% /
/dev/xvdc 31M 674K 29M 3% /boot
/dev/lvmData-home 62M 26M 34M 44% /home
/dev/lvmData-usr 2.0G 848M 1.1G 45% /usr
/dev/lvmData-tmp 496M 20M 451M 5% /tmp
/dev/lvmData-srv 1.5G 769M 667M 54% /srv
/dev/lvmData-var 496M 231M 241M 49% /var
/dev/lvmData-pacman 384M 303M 82M 79% /var/cache/pacman
/dev/lvmData-backup 5.5G 4.6G 565M 90% /mnt/backup

How to change the project type of inprogress project

How to change the project type of in-progress project, The project type is Testing and need to change it to basic project plan.

Another way is to click on the top right button of the project center ribbon, after selecting the project. Note that this way works for one project at a time whereas toon's reply works for bulk edit.
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

How to change the task type of bdoc in sap crm

Dear CRM Experts,
I am new to CRM. Want to know how to change the task type of Bdoc from update to insert. I am gettind B doc error due to the reason that under object_task the entry is U , whereas i have to change it to I (insert).
Pls provide deatil answer. Points will be given.
Regards
Rajat
Edited by: Gurinder Pal Singh on Jul 21, 2011 10:17 AM

Hello Rajat,
Please provide us more information about the error you have and it's description so that we can help here arounfd here.
thanks
Willie

How to Change the NAT Type of an Apple Router

My dad just bought an apple Router and some new modem. now since i know the router is apple company i want someone to tell me how i change its NAT Type from Strict to either Moderate or Open because its preventing me from connecting to my friends on xbox live. Im also using a Macbook Pro for a computer so its apple software an their shouldnt be any reason this cant be resolved effectively i just need a guide to tell me how to go about fixing this problem.

Unfortunately, the AirPorts are not listed as Xbox Live-compatible routers ... so there is no guarantee doing this will get Open NAT status for Xbox Live!
The following web blog does a great job explaining the NAT issues with Xbox Live! Basically what it comes down to is that although you can get an Internet connection for the Xbox with the AirPorts, you may not get the necessary NAT setting (Moderate or Open) for the Xbox Live! on-line game that you want to play. As such, you basically have two options: 1) Create a DMZ (Apple calls this a Default Host) for the XBox or 2) Configure the AirPort for Port mapping to open the required ports to allow Xbox Live! access ... or 3) Use a compatible router.
Option 1 - Create a DMZ
AirPort Utility > Select the AEBSn > Manual Setup > Internet > NAT
Enable default host at: <Enter the IP Address for the XBox>
Option 2 - Configure Port Mapping
The following ports must be available for Xbox Live to operate correctly:
UDP 88
UDP 3074
TCP 3074
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the Xbox 360.
AirPort Utility > Select the AEBSn > Manual Setup > Internet > DHCP tab
Click the "+" (Add) button to enter DHCP Reservations.
Description: <enter the desired description of the host device>
Reserve address by: MAC Address
Click Continue.
MAC Address: <Enter the MAC hardware address of the Xbox or the MAC address of the wireless depending on how you connect the XBox to the network.>
IPv4 Address: <enter the desired Private IP address>
Click Done.
2. Setup Port Mapping on the AEBSn.
AirPort Utility > Select the AEBSn > Manual Setup > Internet > NAT > Configure Port Mappings
Click the "+" (Add) button
Service: <choose the appropriate service from the Service pop-up menu>
Public UDP Port(s): 88, 3074
Public TCP Port(s): 3074
Private IP Address: <enter the DHCP Reserved IP address for the Xbox you created earlier>
Private UDP Port(s): 88, 3074
Private TCP Port(s): 3074
Click "Continue"

How to change the data type in the table ESLL for the field USERF2_NUM ?

Hello Friends,
I have a requirement in which one of the change is to convert the data type of the field 'USERF2_NUM' in the table 'ESLL' from 'QUAN' to 'CHAR'.
How do i do it if i have an access to change it..........i think i should also check the impact of the change if done.
Kindly tell me as my requirement starts with this small change.
Regards,
Rajesh Kumar

Thanks for the reply Sowmya.
I would like to know 2 things.
1. Is it ok to change the data type of the field 'USERF2_NUM ' which is in the table ESLL. from quan to char.
2. The table ESLL already has entries. if we change the data type from QUAN to CHAR what is the effect on the existing entries of the table .
Kindly reply me back.
Thanks & Regards,
Rajesh Kumar

How to change the table's for an existing report

Hello,
How can I change the table names for reports created with a different table name? for e.g If I created a report which included a table called "2009_10_example", How can I change that table to a different table "2010_10_example1".
I am using Crystal reports 2008, and the reports were created using Report Creating Wizard.
Thanks,
Abhishek

In the Database Menu, there is an option Set Datasource Location. This allows you to pick a table from the current tables used, and select a table to replace it with. Press the Update button, and Crystal will swap one for the other. If the field names and data types are all the same, it will automatically change all references throughout the report to the new table's fields.
May I suggest that your tables are set up improperly if you have to change report code to run it for different months? The data should all be in one table with dates, and parameters to select the date range to report on. (That was said in the spirit of helping...)
HTH,
Carl

How to Change Source system type of ECC6.0 in BW system

Hi BW Experter,
 I connected ECC6.0 PRD system with BI7.0 PRD system , the connection is successful,
but the source system type of ECC6.0 PRD is not collect . The ECC6.0 PRD is as a
BW system type in the source system list of bw system .
 I found that Tcode RSA1 has ever been run in PRD ECC6.0 , So I did a connection testing of
ECC6.0 QA with BI7.0 PRD .
 Step 1. Connect ECC6.0 QA with BI7.0 PRD , ECC6.0 QA was as SAP system type in source system list of bw system .
 Step 2. Run tcode RSA1 in QA ECC6.0
 Step 3. Delete connection of ECC6.0 QA with BI7.0 PRD .
 Step 4. Connect ECC6.0 QA with BI7.0 PRD again , ECC6.0 QA was as SAP system type in source system list of bw system .
 I want to know how to change ECC6.0 PRD source system type to SAP .
If it can't been change to SAP ,Is there any impact when ECC6.0 PRD is as bw system type in source system .
Thank you for your help .

I got the soulution from note: 1087980 - ECC Source systems appearing in BI folder
Summary
Symptom
Source system connection for an ECC system appears in the BI folder, rather than in SAP folder, as expected.
Other terms
Wrong folder,RSA1, RSBASIDOC, RSAP_BIW_DISCONNECT
Reason and Prerequisites
Transaction RSA1 was inadvertently used on an ECC system , thereby creating a 'Myself' source system entry in RSBASIDOC table
Solution
This is just a display issue and does not cause any operational issues. Therefore, it need not be corrected, especially if the ECC system in question is used as a BI system as well.
If it is absolutely required that the ECC source system appear in the correct folder, perform the following steps.
1. Check that an entry with SRCTYPE 'M' exists in table RSBASIDOC table of ECC source system.
2. Note the values for SLOGSYS and RLOGSYS. It should be same.
3. Run the function module RSAP_BIW_DISCONNECT in the ECC system.
 NOTE: Never run that function module in a BI system!
4. Enter the following values :
I_BIW_LOGSYS <RLOGSYS> as noted in step 2
I_OLTP_LOGSYS <SLOGSYS> as noted in step 2
I_FORCE_DELETE <X>
< DO NOT ENTER ANY VALUE IN THE FIELD - RFC target sys !!!!! >
5. Go to RSA1-> Source systems in the BI system connected to the ECC system.
6. Select the ECC source system and select RESTORE in the right click menu.
Now the ECC system should appear in the SAP folder.
If running RSAP_BIW_DISCONNECT results in an error like OTHER_ERROR, please check if a valid RFC connection exists in transaction sm59.
If the myself source system connection cannot be deleted in any case, log a service marketplace message with SAP Support.
Edited by: fang frank on Jul 15, 2009 8:31 AM

How to change the order type

Dear friends,
Please tell me the transaction code to change the orger type.
suppose we have an order having type Zrox we want to change the order type from Zrox to Zmto what should I do and how can I do .

Hi
For single order use VOV8 and for Mass use T code MASS

Changing by MASS
There is transaction MASS which can be used to carry out mass changes in the sales order and other objects.
Mass Maintenance: (Use to change multiple fields in multiple documents at the same time). I have done mass change for customers; and orders should work the same way too.
1) Try t-code [MASS] and select sales orders & execute
2) Choose the table or tables for your selection criteria and also for fields you want to change.
Then execute. (suppose your selection criteria fields are from sales order header data table and the field you want to change, is in item data table)
3) Put in the sales documents(21000000, 21000001) you want to change and also the items(10) you want to change. click on choose selection fields button From the Pool, move the fields you want to the select fields using arrows.
4)From mass maintenace menu, click on Enter new field values
-click on sales order item data tab and choose the field you want to change.
(for example. I want to change plant for item 10)
-enter the new value (of the plant to be)
-click on Adopt and execute
5)In sales order item data tab, you see the new value of the plant you entered at the top and the old values of item 10 are below.
-click on change field values button. you see all the old values are changed to new values.
-save
Note: it will take some time depending on how many records you have.
Check: Go to [SM37] and see the status of the job you are running and once finished, export the spool file to a spreadsheet.
Before you do mass maintenance, go to the particular table in [se16] and get the results. Then do the mass maintenance and compare the results with this one. If they match, then you are good to go.
Note: If you have any user exits that affect the results, ask them to deactivate the MODCHECKS still you are done with mass maintenance & activate them again.

X200 Boot Configuration Corrupt !! How do I partition table repair ........help please

Hopefully someone can help me as I'm about to go mad......
My x200 says that my Boot configuration is corrupt and that to repair it I have do a 'partition table repair' error code 0x490
I have tried to use the recovery cd's but each time they try and restore to factory original settings it says becuase there had been a previous attemp to restore which was stopped early the Boot Configuration isn't complete and I dont have enough room on the partition swload c: to carryon - again its saying to increase the size of the partition swload c: but I don't know how !!!!!!!
I've looked in the BIOS setup but cant see anything in there about partitions......
Can anybody help please :-((
Message Edited by Christian333 on 01-18-2009 06:06 AM

Christian333, welcome to the forum,
I personally have never heard of your problem, others may have, but I would start by running Drive Fitness Test from Hitachi to check the hard drive. Even if you don't have an Hitachi drive it will say whether or not the drive is OK. I always run it from CD.
If the drive is OK I would then run Secure Data Disposal at it's lowest level in order to eliminate anything in the boot sectors and then afterwards the recovery discs. If problems are then experienced it's time to call service.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

How to change partition table type

Similar Messages

Maybe you are looking for