How to change "Port Information" in SICF?

Hi experts,
In sicf, we have a button to view the "port information", e.g. domain name and port for HTTP proxy. However, i didn't find a way to modify it. Could u please give a hint?
Thanks in advance.
Regards,
Alex

Those ports are defined in the instance profile of the system and can be defined/changed from RZ10. The parameter is icm/server_port_xx. If the parameter is not defined then it uses the default values.
The profile values looks something like this:
icm/server_port_0 PROT=HTTP,PORT=80$$,TIMEOUT=90,PROCTIMEOUT=3600
icm/server_port_1 PROT=SMTP,PORT=25$$,TIMEOUT=90,PROCTIMEOUT=3600
Hope this helps.
Thanks,
Naveed

Similar Messages

How to change Port Information shown in sicf in fully qualified host name?

Hi guys,
I want to use the CS Documentation Tool for SAP BW.
In DEV everything is OK, but in PROD I can´t execute.
I know what´s wrong, but I don´t know where to correct the error.
When I use transaction sicf -> execute -> GoTo -> Port Information I can only see the server name instead of the fully qualified host name.
Can anybody tell me, where to change the name?
Thanks a lot,
Barbara

Those ports are defined in the instance profile of the system and can be defined/changed from RZ10. The parameter is icm/server_port_xx. If the parameter is not defined then it uses the default values.
The profile values looks something like this:
icm/server_port_0 PROT=HTTP,PORT=80$$,TIMEOUT=90,PROCTIMEOUT=3600
icm/server_port_1 PROT=SMTP,PORT=25$$,TIMEOUT=90,PROCTIMEOUT=3600
Hope this helps.
Thanks,
Naveed

How to change ports in apps

Hi Sawwan,
how to change ports in apps 11i on Linux, Please let me know if any metalink notes.
Thanks

Danny,
Please see if these documents help.
Note: 419823.1 - OAM: Web Components Status: Shows Down Even When The System Works Fine
Note: 309271.1 - Web Components Status in OAM Shows All Down Even When the System Works Fine
Note: 434569.1 - OAM application dashbord shows all the web components with status down whereas they are up
Note: 287415.1 - Host Status In Application Dashboard Overview Tab Shown As Down in OAM
Regards,
Hussein

How to change billing information for my annual subscription as the chart through which I was paying

The option that gives me my brand Subscription error and I can not make changes.

It solved the problem of changing the credit card for payment of a subcripción.
thanks
Date: Wed, 18 Jul 2012 14:22:59 -0600
From: [email protected]
To: [email protected]
Subject: How to change billing information for my annual subscription as the chart through which I was paying
    Re: How to change billing information for my annual subscription as the chart through which I was paying
    created by David__B in Adobe Creative Cloud - View the full discussion
Hi Beto, What information are you attempting to change (address, credit card)? What is the error message you are getting? Would it be possible to post a screen shot of the error? -Dave
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4565913#4565913
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4565913#4565913. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Creative Cloud by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to change port for discoverer server

Hi All,
Current default port is 7777 for discoverer server.
how to change the port number ?
Thank you.

[Disco Configuration Guide|http://download.oracle.com/docs/html/B13918_03/maint.htm#i1035783]
Hi,
I would recommend using the Oracle Business Intelligence Discoverer Configuration Guide appropriate for your implementation (e.g. for Oracle BI Discoverer 10g Release 2 for SPARC, click on the link above). Here is what the documentation says:
To change the port on which Discoverer is deployed:
-Start Oracle Application Server Control and display the System Components page (for more information, see Section 5.1.2, "How to start Application Server Control and display the System Components page").
Display the Ports tab
-In the rows containing the Oracle HTTP Server component (Type=Listen), select the edit icon in the Configure column to display the Server Properties page for that component.
-Scroll down to the Listening Addresses and Ports area and change the port number in the Default Port field.
-Click OK.
-When you are prompted to restart the Oracle HTTP Server, click Yes.
For more information about the Server Properties page in Application Server Control, see Application Server Control Help.
Hint: If you change a Discoverer port number, make sure that any other OracleAS components that use that Discoverer port number are synchronized.
I have not needed to do this, so I can not speak from experience. As always, try this in a test environment first.
Patrick
Edited by: Patrick Bacon on Dec 8, 2009 5:31 AM

HT201359 i have al ready apple account . when i used free apps i saw the review payment setting and still show the credit card information but i dont have credit card how i change that information

i have already apple account when i used app then show your apple id and password i put my account id and password then show your account review payment information . i dont have any credit card how i change it

Every country in the world has the None option.
This user, mountaingoatgirl, explains how to get a None option in your account details in the iTunes app on a Mac or PC. -
https://discussions.apple.com/message/24907941

How to change Port 1521 to 1526 on EBS 11.5.10.2

Hi,
I am using EBS 11.5.10.2 and 9i Database. ( Single Node ) , on Linux platform
I want to change port form Port 1521 to 1526 on the Server
Can some please guide me how to do this.
Thanks,

There is a port pool calculator in the Rapid Clone FAQ for 11i. The easiest way to change an existing port pool is to vi $CONTEXT_FILE in both oracle and applmgr environments, globally change the ports, and run adconfig on both database and applications with the applications down. Restart the database and listener when you are done.
FAQ: Cloning Oracle Applications Release 11i
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=216664.1
On database $CONTEXT_FILE:
:1,$s/1521/1526/g
On applications $CONTEXT_FILE:
:1,$s/1521/1526/g
:1,$s/1626/1631/g
:1,$s/7000/7005/g
:1,$s/8000/8005/g
:1,$s/8100/8105/g
:1,$s/8200/8205/g
:1,$s/8800/8805/g
:1,$s/9000/9005/g
:1,$s/9100/9105/g
:1,$s/9200/9205/g
:1,$s/9300/9305/g
:1,$s/9500/9505/g
:1,$s/9600/9605/g
:1,$s/9700/9705/g
:1,$s/9800/9805/g
:1,$s/10000/10005/g
:1,$s/10100/10105/g
:1,$s/10200/10205/g
:1,$s/10300/10305/g
:1,$s/15000/15005/g
:1,$s/16000/16050/g
:1,$s/16009/16059/g
:1,$s/17000/17050/g
:1,$s/17009/17059/g
:1,$s/18000/18050/g
:1,$s/18009/18059/g
:1,$s/19000/19050/g
:1,$s/19009/19059/g
:1,$s/12345/12350/g
:1,$s/20000/20005/g

How to change port settings? on macbook pro 15"

hi all, I am trying to sync my phone from my Mac and the software im using has a default port it sends to so how to i manually changes port settings for port 1? thank you.

are these COM ports or TCP/IP ports? Give us a little info on this software.

How to change port settings on airport extreme

I need to change port settings on new airport extreme routers for xbox. I have the port settings, just do not how or where to make the change.

dan620 wrote:
I need to change port settings on new airport extreme routers for xbox.
Welcome to Apple's discussion groups.
Launch AirPort Utility, select your AirPort Extreme, click on "Manual Setup", select the "Advanced" panel, then the "Port Mapping" tab.

How to change port for deployed web application on IAS10g(from 7778 to 80)

I have deployed an application on IAS Application Server. The default link to my application is:
http:/my_sever_ip_address:7778/my_app
Can any one tell me how to change the port that my_app run on from 7778 to 80.
So that the link to my_app will be:
http:/my_sever_ip_address/my_app (run on default port 80)
Very urgent!
Thx

You need to read the Oracle® Application Server 10g Administrator's Guide of your installation, which is also available online. In particular, for 9.0.4, you need to read the chapter Managing ports. Basically you need to change your web-cache listener port if web-cache is installed; otherwise you need to change Oracle HTTP Server Port.
Also note tht port 80 requires extra steps since it is a restricted port.

How to change the information at initial start up?

Hi Everyone,
I got a brand new iMac last year. When I turned on my brand new possesion my significant other thought it would be funny to put someone else's name at the Start-up. It really hasn't affected my performance on the iMac but now it really is starting to tick me off to see a extrangers name on my Mac. Can anyone tell me how to change this name? Do I have to back up and re-start the Mac all together? Any shortcuts to avoid doing this?
I am running 10.7.3
Thank you in advance for any answers.

Hi,
My user while creating the Billing document through VF01 on every 1st week of the month, they are getting the below information message and we have solution also.
Document xxxxxxxxxx saved (no accounting document generated)
Instead of trying to change message to error ,check in billing document that why revenue accounts not determining in billing document trhu environment->acc.determ.analysis->revenue accounts and maintain VKOA settings accordingly.
BR's,
Naren

How to change Contact Information in SAP

Okay, so I've been trying to figure out how to change my own contact information in SAP for the Sales Employee/Employee Responsible field.
I've looked through this site and it's wiki, and also in the SAP help, but couldn't figure it out. I know the answer is probably somewhere on this forum, but for the life of me I can't find it.
Thank you,

Hi,
Please see the following documents.
Note: 365735.1 - How To Use, Create And /Or Update Digital Certificates For Jinitiator in 11i Applications
Note: 175419.1 - How to Create or Update Digital Certificates for 11i Applications
Regards,
Hussein

How to change song information by group?

I know we can change song information by group by selecting multiple items.
However, this option only allow to change a limited set of information.
I can't find a way to change songs by group in some of the options in the "Options" tab, i.e. Remember playback position, Skip when shuffling and Video Kind (for videos only).
Any help is greatly appreciated.

Nothing you can do about it

How to change file information in ADE?

I am having trouble loading eBooks into ADE with missing book information. I would like the books to be searchable after they are input into my Nook, but when I load the books into ADE some of the information fields are blank (author, title, etc.). I don't see an "edit file info" button anywhere and when I change the file info in Explorer, it still imports incorrectly. How can I edit file information in ADE so my books can be easily searcheable in my Nook?

Thank you for advice.
I know that I can create epub files with fonts included in them.
My question was- how to refer in the epub to external font file, that ADE would understand and display,
doing that would let me keep overall file size of my book library significantly less, because I would not need to include same fonts in every book.
I am able to do it on the devices, I am able to do it in Sony Reader Library, but PC version of Adobe Digital Editions does not work the same way. All I need is to know where to put external fonts on my PC so that I could refer to them from inside the epub and that ADE would find and display them.
Though I do appreciate the attention, I'd double the appreciation if you read the question before offering the answer.

How to change location information under metadata tab?

When I use the search box under the Places icon to assign a location to a photo, sometimes Aperture places a pin near but not directly on the place I have identified and puts an incorrect location in the tag. If I zoom in, I can accurately place the pin, and the tag then changes to the correct location. The problem is that both correct and incorrect locations display in the location box in the metadata field. I've tried completely eliminating the incorrect location with Manage my Places. I've tried removing the location from the photo and starting again. In both cases, both original locations remain in the location box under the Metadata tab. This makes using the search function for places worthless since there are so many false hits.
Is there anyway to modify the location box under the metadata tab once in contains inaccurate information?

I tried inserting a screen shot here, but I got a message that said "The content type of this image is not allowed." Let me see if I can explain more clearly.
To assign places, I have begun by clicking on the Places icon on the upper right hand side of the screen where the choices are Browser, Split View, Viewer, Faces, Places, Loupe, Full Screen. When I click on Places, I get a search box where I put the place I want to assign to a photo. Sometimes, when I see the location I want in the search results and click on Assign, Aperture puts a pin close to the desired location (but not exactly on it) and gives it a random place name (not the one I chose). If I zoom in and put the pin exactly where I want it, the place name changes to the one that I searched for to begin with. So far so good.
On the left hand column of the screen, there are three tabs at the top of the column - Library, Metadata, and Adjustments. If I click on the Metadata Inspector and look at the Location box at the bottom of that screen for the photo I've just described above, I see two locations listed - the first incorrect place name as well as the correct location that I changed it to when I moved the pin.
I've tried three things unsuccessfully to get around this problem.
In the Metadata drop-down menu, I've used Manage Your Places to delete the wrong location altogether. It disappears from my list of locations there, but it remains in the Location box for the in individual picture in the Metadata Inspector. From the Action pop-up menu (the gear icon) for the individual photo in the Metadata Inspector, I've chosen Location Name and selected the single name that I want. Both names remain in the Location box. I've had a One-on-One session at the Apple Store. (I took my computer with me so that she would see exactly what I was talking about.) The woman there told me that she thinks that this is a bug, and she doesn't know how to get around it. It was she who recommended that I try the Apple Support Communities to see if anyone has solved this.

How to change "Port Information" in SICF?

Similar Messages

Maybe you are looking for