How to change printer head on HP Officejet PRO L7590

How do I change the printer heads on an HP Officejet PRO L7590

Hi there first43,
This article contains the steps for removing and replacing printheads. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

  • How to change printer heads on the officejet pro 8500 premier A909n

    My Officejet pro 8500 premier A909n will not print color i have cleaned the printerheads a few times and it still wont print colors. How do i change the printerheads? I tried to get the cover off on the right hand side but cant seem to get it off and i really do not want to break it. How does it come off?

    Hi there @plbart 
    Welcome to the HP Forums!
    I read about how you are looking to remove the printheads in your Officejet 8500 A909 model.
    Check out this guide I have found for you that will show you instructions on how to replace and remove the printheads.
    Replacing the Printhead for HP Officejet Pro 8500 All-in-One Printer Series (A909)
    I hope this helps, have a great Monday!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Changing Print head on HP Officejet Pro 8500

    How do you install a new printhead on the HP officejet 8500 pro? I cannot get the print heads to move to the left so I can change the printhead. There is no OK botton to push and when you open the top, it says to change the printhead, push the * for 5 seconds with all the doors closed.  That doesn't work either.  Any help?
    This question was solved.
    View Solution.

    Hi,
    I understand that you are having difficulties replacing the printhead.
    Please click on the link below to see a video of how to replace the cartridges and printheads.
    Replacing prinhead
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Re: Print head replacement for OfficeJet Pro L7580

    Help!  I have an OfficeJet Pro L7580  and the ink was running dry on the black and yellow.  I replaced the ink, but now it still will not print.  It says there is a problem with the yellow and black print heads.   Question is where do I get them and how much do they cost and will that fix my problem?  I have found them in my computer and can take them out with no problem, just don't know how to get new ones!

    The online HP Parts Store should be able to help get the part:
    http://h20141.www2.hp.com/Hpparts/Default.aspx?mscssid=547D739C0DCC43949105EA3B0F3B1FB5
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • How can I print to my HP OfficeJet 6500 Wireless Printer from my iPhone 4S which used to work before AirPrint printers were even available? (running Mac Lion OS, all software and HP sw updates are all performed)

    How can I print to my HP OfficeJet 6500 Wireless Printer from my iPhone 4S which used to work (on prior iPhones) before AirPrint printers were even available? (running Mac Lion OS, all software and HP sw updates are all performed)
    I don't get it, I read one post about why would we have to buy an AirPrint Printer when we have used the "print to a wifi printer" just fine in the past?  Yes I feel that's exactly what's happening to me now too. I want to print from my iPhone and iPad to my WiFi Printer which is also now connected to my Airport Express WiFi network just fine. No problems.

    Very glad you added that bit of information because I see different problems similar to this.  I want to share with them what you did and hopefully you not only fixed your specific problem but you can lend some more advice to others with problems like this. Thanks!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • How to change printer and or system settings to print in color

    How to change printer and or system settings to print in color

    You can change the brightness with an RGBImageFilter which converts the rgb values to HSV, increases the value, and converts back to rgb.

  • How to Change Journal Header name to Custom Header Name while GL Importing?

    Hello Experts,
    I am in situation where customer wanted to keep their own journal header naming conventions to imported journals in Oracle GL for custom Journal sources.
    As I know while importing journals, Oracle Creates the Journal Name based on the below mentioned logic.
    "Journal Import creates a default journal entry name using the following format:
    (Optional User-Entered REFERENCE4)(Category Name)(Currency)
    (Currency Conversion Type, if applicable)
    (Currency Conversion Rate, if applicable)
    (Currency Conversion Date, if applicable) (Encumbrance Type ID, if applicable)
    (Budget VersionID, if applicable). If you enter a journal entry name,
    Journal Import prepends the first 25 characters of your journal entry name to
    the above format"
    But then How it is possible to only allow journal header Name to be used present in REFERENCE4 excluding all other string provided by Oracle? Instead of using omitted string custmoer wanted to keep their own parameters. Example - REFERENCE4.A.B.C etc.
    Is it possible to solve this using seeded setup or modifying some hook packages or anything else?
    As far as I know there can be one workaround to be use of updating journal header name after journal import being completed successfully for custom journal source. But only fear is Oracle doesnt allow updating the base table without API. Am I rght?
    So it would be really great if anyone of you can suggest the best solution or best possible workaround.
    Thanks

    Duplicate - How to Change Journal Header name to Custom Header Name while GL Importing?

  • How do you print to a HP Officejet 8500 from an iPad?

    How do you print to a HP Officejet 8500 Pro from an iPad?

    Is it an 8500 or 8500a?  Only the 8500a supports direct printing from an iPad (with no 3rd party printing software).
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How to change printer preferences for HP envy 4500 using Google Chromebook HP pavilion 14

    I want to know how to change printer preferences for HP envy 4500 using Google Chromebook HP pavilion 14?
    This question was solved.
    View Solution.

     Hi chefcorbin,
    Welcome to the HP Support forums.  I understand that you would like to learn how to change the printer preferences using your Chromebook.
    I have included a link to Google support on printing a page with Chrome and it lists the print settings that you can adjust.
    Google Chrome Help - Print a Page
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • HP Officejet Pro L7590 won't print correctly after it sits a few days

    I have a HP Officejet Pro L7590 All In One.  It all of a sudden will not print correctly after it sits a few days.  I purchased a new black/yellow printhead recently and it did print well for about a week.  If it sits a few days, it acts up again.  All I have to do to fix it is take out the yellow/black printhead clean with sterile water on a q tip the printhead, put it back in, and walla it prints again until the next time I want to use the printer, and the same thing again.  Today I printed out some pictures after not using the printer for 5 days, the pics had large vertical stripes in them, the stripes have colors in them.  I cleaned the printhead and it worked perfectly.  Any ideas.  I have replaced the black cartride, and the yellow recently.
    thanks for your input

    Hello pcmtgrl
    Which model of the Officejet 8500A series do you have? Typically you can find it inside the printer where you change the ink cartridges. Example: A910g, A910a, etc.
    Has anything changed recently since the problem started? Is the printer plugged into a wall outlet or a surge protector? Do you have the latest firmware installed? I also suggest running the HP Hardware Diagnostic Utility. Let me know if it finds anything out.
    Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
    When a solution is found please mark the post that solves your issue.

  • HP Officejet Pro L7590 Printer - HP Solution Center does not work

    I am not able to get the Solution Center suite to work because the installation has an error.  I am using Windows 7 Home Premium.  The printer I am installing is the HP Officejet Pro L7590.
    If I go to Devices and Printers and add the printer.  The driver Windows 7 driver would work, it would detect the printer and the test page and everything would be fine. 
    However, if I install using the software provided by HP for the L7590 it would result in an error and it would not work. 
    The failed driver installation is only from installing the full bundle software provided by HP, if by itself through Windows 7 it would be fine.
    Because of the failed installation using HP software the HP solution center does not work.
    In Devices and Printers, the printer has the yellow exclamation point requiring troubleshooting, I click on troubleshoot and no device drivers were found.  In addition, I could not remove the printer.  Before installing the HP software, I could successfully install the printer and there would be a green checkmark, and there would be an option to remove the printer.  This leads me to believe HP has a faulty software bug that is causing the error.
    I am suppose to use the HP add a printer shortcut that populated on my desktop after installing the software, the first time it would show the failure to successfully install the driver, afterwards it would not even detect my printer if it is plugged in.  If I remove the usb and reinsert it, the Windows would just show the failed driver.  I repeat, it failed after I install the software, it works fine without.  The primary reason I want the software is to use the scanning feature.

    Hello NickRT, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having software installation issues.  i would like to try and assist you.
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    Once the computer is in clean boot mode, I would reinstalling the HP Officejet Pro Full Feature Software and Driver.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

    Have had HP Officejet Pro L7590 All-In-One Printer for years.  Always worked fine and I had no issues printing via wireless connection.  Several months ago..  Possibly after a Windows 8 update.  From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature.  When I try to print or scan it shows the printer as offline.  Also get an error message that tells me "HP Imaging device is not found".  I can still print when connected to USB.  Cannot scan or use features of the HP software suite.  I have tried several times to correct.  Reloading the software and drivers several times, but no success.  I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it.  Then tried to print something and got the same error message I have seen in the past.  I have talked to certain supports saying that it may be a firewall setting within Windows.  Any other suggestions?  Thanks

    Hi @rfjones002,
    Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
    I would like you to start with the steps listed below:
    Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
    Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
    Uninstall the software again - Uninstall the Printer Software Instructions
    When the uninstall has completed restart the computer
    Follow these steps to reset the registry settings and options for Windows Installer.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type
    msiexec /unregister
    and then click OK.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type
    msiexec /regserver
    and then click OK
    *Note: there is a space between the c and the /
    If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
    Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
    Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplaye​r/downloads.html
    Perform a clean boot > How to perform a clean boot in Windows
    Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
    Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
    - Image source
    Now you can go ahead and download and install the software here >
    HP Officejet Pro Full Feature Software and Driver
    If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    Please let me know if this was successful! I will watch for your reply.
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP OfficeJet Pro L7590 network printer

    I just upgraded to v4.2.1 on my iPhone 4 and tried to use the new feature, AirPrint without success. My printer is linked using cat5 cable with my wired and wireless router and can be used with about 3-4 pcs within my family. I searched some articles and understand only a couple of HP printers can use this feature. How come Apple spend so much effort for a couple of printers of single company? I never imagined it becomes true. Did I misunderstand this feature? Thanks!

    The Officejet Pro L7590 unfortunately will not be updated to support AirPrint. Check out my [FAQ|http://discussions.apple.com/thread.jspa?threadID=2658560&tstart=0] thread for some other options.
    Just trying to help.
    Andrew

  • Officejet Pro L7590 will not print in black

    I have an All in One Officejet Pro L7590.  When I first got the printer 3 months ago, everything was printing perfectly.  Now, out of nowhere, it will not print in black.  It only prints in color.  I have done all the aligning, printhead cleaning, changing cartridges, etc.  I am at a loss as to what to do.  Has anyone had this problem with this model?  Can anyone help?  Thank you.  

    Thank you so much for responding.  After (3) HP printers all having the same difficulty and support not knowing what the problem was, (also many hours with Support) I determined it was the printheads also.  The printheads don't seem to last very long and can be more costly than the printer itself if you have to keep replacing them.  I changed over to a laser jet.  No printheads needed.  And I have not had any problems so far. Just need to replace the ink cartridges when they run out.  I have the HP Color LaserJet CP1518ni.   

  • Windows 8 driver cannot find HP Officejet Pro L7590 ethernet printer on my new router

    I'm changing to a new router and had to change the IP address of my ethernet Officejet Pro L7590 from fixed assigned 192.168.1.7 into fixed assigned 192.168.2.168 (my new provider provided router doesn't support the 192.168.1.xx range). At installation my PC Driver cannot find my HP Officejet Pro L7590 ethernet printer, both not by it's search function, nor by giving the specific new IP address.  Browsing and login into the printer by adressing the new Static IP address works however fine: de printer is well attached. What do I wrong with at PC driver installation, any suggestions to have the printer coupled to the PC driver?
    Update: Connecting the printer directly to the router instead of via a switch solved  the problem!

    The Officejet Pro L7590 unfortunately will not be updated to support AirPrint. Check out my [FAQ|http://discussions.apple.com/thread.jspa?threadID=2658560&tstart=0] thread for some other options.
    Just trying to help.
    Andrew

Maybe you are looking for