How to change printer's Gateway IP address
Trying to setup wireless networking on my Officejet 6500 Wireless
When working thru the configuration, utility reports:
The gateway IP address 0.0.0.0 of the printer does not match your router. Reconfigure the setting on your printer to match.
How do I do that. I can't find any mechanism.
I do have Norton firewall, and running some of the [HP printer] utilities complains about it (when I try to troubleshoot), but I have now disabled it, with no luck re-configuring/installing the wireless for the printer.
PC wireless address (VistA) 10.0.1.4
printer 10.0.1.198
default gateway should be 10.0.1.1
primary DNS is 10.0.1.1
network is built onb Airport Extreme, to cable modem.
thanks
This question was solved.
View Solution.
It sounds like your printer is connected wirelessly to your router (the IP of 10.0.1.198 seems valid).
Your best bet is to set a static IP for the printer and set the gateway at the same time. Here is how:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. Enter the current IP address.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Leave the gateway and DNS blank. This should take care of the error you are getting.
- Click 'Apply'
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Similar Messages
-
How to change printer and or system settings to print in color
How to change printer and or system settings to print in color
You can change the brightness with an RGBImageFilter which converts the rgb values to HSV, increases the value, and converts back to rgb.
-
How can I print my Avery return address labels (easy peel) template 5195 on my mac?
How can I print my Avery return address labels (easy peel) template 5195 on my mac? When I try to print them via avery website, they appear shunk on the page.
What application are you trying to print from? Address Book has the ability to print using various label templates. I think you can do the same from Pages or Word.
Best of luck. -
How to change the SBO mailer email address
Hi,
Just want to check , how to change the SBO mailer email address?
Thanks and Regards,
MelvinPlease take a look at this link
http://www.dei.isep.ipp.pt/~jmendes/SINFI-2005/SAPB1_Documentation/_TB1300%20Material/BO65000_14-10001981/Documentation/Service%20Manager/SBO_ServiceManager_65_EN.pdf
You no need to send mails through outlook. Once you run the Addon of outlook integration yu have to do the outlook settings and then you cansend it internally hrough B1 but history will get stored in outlooksent box. -
How to change printer preferences for HP envy 4500 using Google Chromebook HP pavilion 14
I want to know how to change printer preferences for HP envy 4500 using Google Chromebook HP pavilion 14?
This question was solved.
View Solution.Hi chefcorbin,
Welcome to the HP Support forums. I understand that you would like to learn how to change the printer preferences using your Chromebook.
I have included a link to Google support on printing a page with Chrome and it lists the print settings that you can adjust.
Google Chrome Help - Print a Page
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
How can i print the e-mail address book
I need to be able to share the address book. How can I print the contents
There is no good way that I have found to print them directly from Thunderbird.
The best way that I have found is to export the address book to a comma separated file, .csv file, then open that with Excel or Open Office, format the file like you want and print from there.
The added benefit of doing this is now you have a backup file of your address book in case something bad happens.
The Export command is under Tools in the Address Book window. -
How can I print ,my e-mail addresses?
How can I print the list of my e-mail addresses?
please explain more about the application or the website you want to print from,
but if you need to print them from outlook program -> open contacts > select a folder of contacts "if you have any" > with windows keyboard click (CTRL + P)
then adjust number of copies then press print button -
How to change the text "form of address" while Create User in EP6.0??
Hi All,
We are using NDS 2.0.9 & EP6.0.
I have the following doubts:
1) I have to change the text <b>Form of Address</b> which comes when we <b>Create User</b> in EP.
Can any1 please let me know how to change that text? Is there any .par file? What is the name of .par file (if any) which is used to <b>Create User</b> in EP6.0??
2) I am getting the value of this <b>form of address</b> by <b>request.getSalutation()</b> in PDK, but this value is coming in the <b>Welcome Message</b> in the masthead. I tried to change the masthead by changing the corresponding code, but i am getting a runtime error. Is there any other method of making this salutation value <b>NOT</b> appear in the masthead welcome message?
Please help me in this regard. Thanks in Advance. Bye.
<b>Regards,
Sai Krishna.</b>Hi Sai Krishna,
within HeadiView.jsp, you'll find this code fragment:
if(salutation != null) {
return java.text.MessageFormat.format(welcomeClause, new Object[] {firstName, lastName, salutation}).toString();
} else {
return java.text.MessageFormat.format(welcomeClause, new Object[] {firstName, lastName, " "}).toString();
Just delete the first part and always use the second:
return java.text.MessageFormat.format(welcomeClause, new Object[] {firstName, lastName, " "}).toString();
This will delete the salutation without errors
Hope it helps
Detlev
PS: For both solutions, 1. and 2., think of it: These workarounds will be overwritten witch patches / maybe hotfixes. -
How to change the automatically generated email address?
Hello,
The description of the problem is as follows:
When our system sends to the customer the report with account statements (as an attachment) the automatically generated text that he receives in the email is:
"Please respond to "K047472" "
but the text should be:
"Please respond to "(..here must be a certain email address we want the customer to respond)"
Do you have any idea how to change this?
regards,
SlawekHi Slawomir
Please go to SE91 and change the message text.
thanks
Ashok
assign points for useful answer -
How to change printing settings
I am trying to print from photoshop elements 10 and the paper I am using is an odd size 8x5.
when I go tp print, it asks me to pick the size paper i'm using, and there is no size that i need there.
What do I do to add my paper size?I found out how to do it and completed the change successfully.
I did it by following the instructions in this link:
https://discussions.apple.com/thread/1962435
Matt Broughton
This helped meRe: How to change default print setting to duplex
Apr 1, 2009 6:03 PM (in response to Clinto)
Use a web browser to access the web interface for the printing system. Go to _http://127.0.0.1:631/printers_ and find your printer. Click on the button *Set Printer Options*. You should select duplex printing and the orientation that you want to make default. Be sure to click the *Set Printer Options* button when you are done. You will have to supply your administrator's short user name and password. Matt -
Pixma mg3222 how to change printer settings
I have the pixma MG 3222 printer need help changing the printer settings to print a template by Avery #5931 (cd label)
Hi,
using SPAD transaction you can change printer setting. although you can change device setting, character setting etc,
Regards,
Kunjan -
How to change print size and DPI setting in Aperture
If I import a raw image from my camera (D2X) to Aperture and print the image at about 8"x10" through Aperture, it prints at about 300 DPI, if I change to size of the same image to 12"x18", in Aperture, it prints the image at about 166 DPI. I do not believe there is a way to change this in Aperture.
My question is, can I open the image at 8"x10" in PS, change the size and resolution to 12"x18" and 300 DPI then save it, open it again in Aperture and print it. If I do these things, will the image printed in Aperture still be 300 DPI and how can I check it to see if that is the case?
I have not been able to find the DPI setting anywhere in Aperture to confirm that it is what I want or need."You can make the pixels bigger by making the image larger but you can't add any more pixels without running some kind of interpolation filtration like GenuineFractals or a recomputation like bicubic."
Thank you for your explanation and that brings me exactly to the point of my question.
Can I interpolate my original NEF raw image after conversion by Aperture to a much larger image for print using something similar to what Photoshop does with it's bicubic smoother or as is done in genuine fractals or must I go out of Aperture and back if I want to print with Aperture. I am hoping you will tell me that Aperture is or will be capable of interpolating an image to a larger one with more than just the pixels supplied by the camera. I do not belive that these are not enough by themselves to print a quality image in a much larger size.
I may be wrong, but I believe that it is somewhat common practice to interpolate an image to get a greater resolution printed image at a size larger that what is possible with a resolution provided by the (D2x in my case) DSLR camera.
Or is this just a tempest in a teapot. In other words, will I be able to take the image out of the D2x (12.5 megapixels) and print a 13x 19" image with the same quality in Aperture (uninterpolated but enlarged) as an interpolated image in PS or Genuine Fractals and then in PS?
Thank you -
How do I print "and Family" on address labels for Holiday cards?
I have a holiday list and when I try to set it up to print labels, I would like to be able to add Family on the labels so it appears to go to everyone in the family.
I don't want to change the "card" to include & family because it affects all emails etc. I just want to do it for these labels. Any suggestions would be greatly appreciated.
Thanks,
SkipHi Todd
I've managed to solve this for the moment but it's a long-winded way of doing it. I used Entourage to import contact details from Address Book and then exported the data as a CSV file. I was then able to import this into a Filemaker Pro database which allows a bit more flexibility for creating labels with spouses and "& family" etc.
It's a shame Filemaker couldn't come up with a better Address Book application for Apple. I love the integration with Mail, .Mac and the synching capabilities but as an application, I find it pretty inflexible. -
Installed new wireless router; don't know how to change printer settings
I just changed the wireless router which has created a problem with printing. I don't know what I need to do to change the printer settings to accommodate the new wireless router. Would greatly appreciate any help with how to do so. I'm on Windows XP, SP3 with a HP all in one on a wireless laptop (don't have wired connection). Wireless router is a linksys. Security AVG 8 trial version. Thank you!
This question was solved.
View Solution.What is the model of your printer? Did you install the printer via a USB previously?
Please click on KUDOS if you find my solution helpful. -
Old email address showing in icloud and I can't see how to change it back to my address
My son gave me his old iphone and we changed the name to my email address and Apple id etc. Yesterday I downloaded the new 7.0.2 update and now icloud is showing up as my sons old email address. How do I change it back to my email address please?
Sign out of iCloud on your iPhone and sign in with own appleID. setting --> iCloud --> Sign out You can check your status and connected devices on icloud.com
Maybe you are looking for
-
Problem of Iphone 5C synchronization after an upgrade 8.1.1.: I upgrade my Iphone 5C with IOS 8.1.1 and now I can't synchronize my iphone with my Apple computer, it stop on level 3 (calendars synchronization). Could you help me ? Thanks
-
HT202213 Apple TV stopped recognizing my library.
Apple TV won't recognize my library. I tried signing out then back in to the iTunes store, I tried turning home sharing off and on again. Nothing works. This has happened several times where it resolves after a couple of weeks.
-
HP psc 24110 all-in-one - Problems scanning with OS X v10.5.7
Hi, I have been using my HP psc 2410 photosmart all-in-one printer successfully for the past 10months with my MacBook Pro. I recently upgraded my OSX operating system to v10.5.7. since then my printer has been unable to scan. It will print, copy & fa
-
Appletv out put to audio and video
Hi Have an ATV2 and have the HDMI going to tv. Sorted, lovely. Am going to get a BOSE sound bar under the telly, and I want to connect the ATV to the TV and the sound bar so that I can play iTunes music throu AirPlay to the ATV in the lounge without
-
Line string validation and ORA-13349 on polygons
Hi all, We are having the following problem: Our application accepts linestrings and connects them to create polygons. Each individual line validates TRUE but some polygons validate with ORA-13349. The problem is caused by lines that we call Lightnin