How to change Production Order Number in CO01

Hi,
I have requirement to change the system provided production order number AUFNR to alphanumeric while creating Production Order in CO01 based on plant(WERKS) and Order Type(AUART).
I have tried using below exits:-
PPCO0006    - no exporting parameter for AUFNR
PPCO0001   
IQSM0001     - doesn't getting triggered
But unable to resolve the issue.
Please suggest any EXIT/BADI to meet the requirement.
Thanks,
Mayank

Hi Dengyong,
Thanks for your reply.
My doubt is, Order type is already created in the system and whenever I am trying to change the number range it is asking for 'Numeric type only'. I am trying to do the same through CO82.
We have to change the number range of Order Types which is already created in the system. Is it possible???
Thanks
Mayank

Similar Messages

  • Production Order number assignment CO01

    Hello,
    I'm looking to have the production order number assigned early: on entry into 'Production Order Create: Header' screen. Can this be done in standard SAP or would I need to use an exit and external number range?
    Thank you, Mart

    Dear Mart,
    Check the number range assigned to the order type and check whether check box for external is included in CO82.
    Or else you can confirm the same through T Codes,SNUM or SNRO for the object AUFTRAG.
    You can enter a number between the from and To no range in CO01 and execute the same.
    Regards
    Mangalraj.S

  • XL Reporter - Prompting for Production Order Number - How to?

    I have watched the FlashBook's for creating reprots, and following the directions. When I go to create a new Paramater, the Document Number is not an available Dimension.
    Can anyone point me in the right direction in setting up an XL Reporter report that prompts for Production Order number / Document ID? How do you create prompts for record ID's?
    Thanks.
    Mike
    Edited by: Mike White on Jun 16, 2008 11:11 PM

    Thank you for the help. This gets me closer then I was before.
    To test, I am list listing the Production Order Document Number and the Due Date. Looking to list only the Production Order and Due Date from a prompted Production Order.
    I tried both Cell Expansion and Row Expansion using the parameter you suggested. Cell Expansion returns all documents, but with a document number of 0. Row expansion gives me an error.
    I have captured all the screen shots and posted them to the web. If you wouldnt mind taking a quick look. I am sure something I am doing is off, but feel I am close with your help.
    http://www.level8systems.com/xlerror.jpg
    Thank you.
    Mike

  • AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE

    Hi Experts...
    Requirement: AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE HISTORY?
    I have seen many threads about implementing OSS NOTES 390635, but hardly any one narrated the process in detail as to how to see 'Change History'..
    I just would like to know 'how' and 'from where' to find Order Change History in detail (i.e Prod .order Comp. change history, Prod. Ord. Operation Change History, Prod. order header change history etc..)
    In general this isssue might sound old one..but 'POST IMPLEMENTING OSS NOTE 390635' is rare one.
    Folks need your expert comments and valuable suggestions....
    Thank You...
    Lucky

    Dear
    You should goto CO02-Enter Production Order -Goto -Change Management -Here it will list down all the chages with relevent information .
    Refer : Re: Production order changes history
    Production orders
    Regards
    JH

  • Production order number generation

    hi,
    i want to modify the format of product order number that system generates after creating the new order in create production order(Transaction code co01) . please help me out and tell how should i procede..
    Moderator message : Duplicate post locked.
    Edited by: Vinod Kumar on Jun 7, 2011 12:38 PM

    Hi
    This is a widely used sceanrio in Automotive.Engine ,Chasis are tracked through equipment serial number.
    Serial Number can be internal (Assigned by SAP) OR it can be external.The general convention is to follow the numeric range but you can also go for Alphanumeric code.We have used only first 2 digits as alphanumeric balance were numbers having differenet significanace like
    Product group
    Line
    Model
    Year
    what you are saying can be achieved by entire numeric sequence also.
    You will have to define Equipment category , serial number ranges under Plant maintenance..technical objects through SPRO.
    Please aslo note in Material master you have to define Sr.no.Profile also.
    regards
    Prakash

  • How to get Production Order Quantity

    I have material number and plant. From this information how to get production order quantity that is displayed in the transaction MD04.
    Thanks,
    Vinay.

    Hi Vinay,
    Have you looked FM <b>MD_STOCK_REQUIREMENTS_LIST_API</b>?
    Hope this will help.
    Regards,
    Ferry ianto

  • Production order number onto a purchase order

    Hi guys,
             Is there  anyway I can pull the production order number onto the related purchase order(i.e, if a purchase order has an item which is procured for a production order ). I'd appreciate your ideas and suggestions on this.
    Thanks
    Cheris T

    hi sridhar,
    Thanks for the response, we procure components for a production order.put them in stock and use them for production.we donot consume them immediately, so we are not using acc. assignment category 'F'. can you plz suggest me how do we capture the production order number on the PO
    Thanks
    cheris T

  • How to change the maximum number of process per user in BW ?

    Hi,
    Do you know how to change the maximum number of process allowed per user ?
    With RSRT we can customize the number of process per query but I don't know where we can customize the maximum number of process per user.
    In fact, my production environment reach always the max number of process available in SM50...
    Thanks a lot

    Hi,
    A user is not have the No. of processor but a work process can handle N No. of users. If a user hit any transaction v acn say from  a list of N worl proceesor which has been taken the work.
    Correct if I am wrong.
    Regards
    Syed.

  • Production order number not consecutive

    Hi,
        Under the same order under the same number range the numbers generated for production order are not consecutive .
    For eg: A production order 10000351
    the next production order number generated is 10000451 etc...
    why is it jumping ..It would be greatly helpful if anyone can answer..

    Hello,
    Yes, this is a critical problem..
    The Production Order numbers jump from one number to the next number without any logic.
    As you sais, for eg. after XXXX1234 it will jump to XXX1241, and for the very next order tha order number may be XXX1452..
    This is because of the Number range buffer which we maintain in "SNRO" (Prod. Order - AUFTRAG)..
    Edit --> set Buffer -- > Main Memory.
    Reduce this buffer to the Minimum and test this in your Test System.
    For further details carefully gothrough the Links below.
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/b4/185f28179c4f3cb8d00988cd139500/frameset.htm
    How the Number Range Buffer Works:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/95/3d5540b8cdcd01e10000000a155106/content.htm
    Administration of the Number Range Buffer
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/aa/dbc9b4b56143bb8f2ae909d7d040fa/content.htm
    Hope this helps..
    Regards,
    Siva

  • Serial number associated with a production order number

    Hi All,
    How i can find serial number associated with a production order number.
    I want to input serial number and material number to fetch the production order number.
    Thanks
    Ritesh
    Edited by: R S D on Jun 8, 2009 7:08 PM
    Edited by: R S D on Jun 9, 2009 8:57 AM

    I am sure this is a solution..please try..
    In SQVI transaction join the tables SER05 and OBJK... YOu will get the results...
    Or
    GO to SA38, enter program RIOBJK00... YOu will get hte results..
    karthick

  • Sales order number based on Production order number.

    Hi,
    Can anyone provide me the relationship between the sales order and production order .
    I need to get the customer material description(ie from vbap for related sales document no) when i give the input  as a production order number ,now my question is how the data is  retriewed  i mean how the production order gets related to sales order and form it how the material no is picked up and its material description..
    Please provide me with the tables and what key fields  are related (clear view how tables are related and how could i fetch the data)

    Swetha,
    There is no exact relationship between a Production order and a Sales order in an MakeToStock environment.  I will therefore assume that you are speaking of MakeToOrder,  where there is an exact relationship between the Production order and the Sales Order/Item.
    Functionally, CO03 > enter the production order number.  On the display screen will be displayed the associated Sales order and item.  Double click on this and it will bring you to VA03.  Select the item of interest, and then Goto > Item > Purchase order data.  The customer material is displayed.  If you have entered a customer material description in your Customer Material Info Record (CMIR) (VD51), and if the Material in the sales order was determined by the customer material info record, then the description will be displayed instead.
    So, at table level:
    Look in AFPO to find production order number.  Contained in AFPO is AFPO-KDAUF and AFPO-KDPOS.
    Use these fields to look in VBAP to locate your sales order/item.  Find VBAP-KDMAT. This is customer material.
    The description of the 'standard' customer materials can always be found in KNMT.  To look this up, you need to know sales org, dist channel, customer, and material.  Lookup using a program is dicey, since it is possible, within a sales order, to determine the material from Customer material, or it is possible to just enter any customer material in the sales order.  When the material is determined, it depends upon your determination logic (sold to? Hierarchy?), which can differ from system to system, and from customer to customer.  To sum it up, it is possible to get the CustMat description from data found in VBAP and VBAK, but you first need to know how your CMIRs are structured.
    For a simple lookup, I suggest you just get to the customer material in VBAP, and stop there.
    For more info about how data is stored in the Sales documents, you might want to ask your question in one of the SD forums.
    Best Regards,
    DB49

  • How to get sales order number before saving in VA01 by using parameter

    Hi,
    Please let me know how to get sales order number in transaction VA01 before saving it by using parameter in SU3.
    I tried to set parameter in SU3 "AUN", but it is not working as required, means sales order number is not appearing before saving.
    can you please suggest how to do it?
    Thanks & Regards.
    Rahul Verulkar

    Hi,
    In case of Support project, we get the high severity issues from users and needs to be closed withn 2 hours... so what we do we get the requirement from user and checking the same in production from our id, but we can not save the sales order as we are not authorized to do the same, so in such cases it is required to get the sales order number before saving... where we can guide the users.... but actuallly it is not getting saved in the table until and unless u save it manually. It works like a material master... when u create material master, the material number appears in advance in material number field "MATNR"
    If it is possible can you please suggest step by step to work on parameter in SU3 for sales order number before saving.
    Thanks & regards,
    Rahul Verulkar

  • Production Order Number Range - Not Continuous

    Hi Team,
    I have assigned the internal number range for my order type in CO82. When the system assigns the internal number (my production order is 10 digit number) to my production order, the number is getting assigned continuously. For example, if the last created production order number is 2481000001 , i am expecting the next number as 2481000002. But system is creating some number like 2481000023. In-between many numbers are missed. Why?
    Production Order Number Range Assigned: From: 2481000000, To:2481999999 (Internal Number range)
    Thanks

    Hi Caetano,
    As described in the note 62077, i can do the following setting.
    1.  Deactivate buffering: Choose 'Edit' -> 'Set Up Buffering' -> 'No Buffering'.
    2. If you want to change the buffer size only, enter the corresponding value in the field 'No. of numbers in buffer'.
    Case 1:
    If i activate the option "No Buffering" for object "auftrag", will it have any negative impact like performance of the system?
    Should i need to activate the option "No Buffering" for object "auftrag" before creating the production order?
    Case 2:
    I do not want to deactivate the buffering. But i will set the 'No. of numbers in buffer'as ONE (1). I think with this settings, the numbers will be always continuous. Will it have any system performance impact?
    Thanks

  • Production Order Number and Batch Number same during order creation

    Hi All,
    I wanted to keep the Production Order number and Batch Number same during creation.
    How I can do that during creation of order only. So during creation same number to be get assigned automatically in the background.
    One thing I can maintain ; the same number range for both.
    But how to activate other functionality.
    Regards,
    Amit

    Hi SAP2511,
    For Production order-
    1.You can define a Order type  and  Mantain the number range same as batch number range (in  OPJH transction)
    For Batch
    1.Activate Automatic internal batch assignment - (OMCZ)
    2.Number range for batch - for object - BATCH_CLT - (OMAD)
    For batch creation at time of Order creation -
    You can create Automatic batch at the time of order creation or order release
    1 Create Production scheduler Profile(OPKP) and assign in Work scheduling view of material master for which you want to create batch at the time of order creation or release.(Select automatic batch creation at the time of release or creation in OPKP)
    Things to be taken care -
    1 . What if you set deleation flag for order?
    Regards
    Girish
    Edited by: girish khobare on Aug 20, 2010 9:31 AM

  • How to trace purchase order number with respect to Purchase requestion numb

    Hi friends,
    Can u please help me how to Trace purchase order number with respect to purchase Requetuion  number. Is there any standard report  available in R/3

    Hi Vamsi,
    Thats what!!!
    Goto SE16 - EBAN - Give PR number in the iput screen.
    In the output screen you will have to do field selection from Menu - Settings - formatlist - choose fields.
    There you choose Purchase Order.
    So the output will display for you POs for the PR that you entered.
    Regards,
    Vishal

Maybe you are looking for

  • Is this really how it's supposed to iWork?

    I have been trying to get into the iWork/iCloud way of doing things but it seems so much more laborious to do simple things. (Pages) Documents need emailing. These documents will be emailed in a Word format 9 times out of 10 so they're widely compati

  • E print app on my phone says this printer does not exist.

    I'm trying to add my printer to my app on my phone and I keep getting the error "This printer does not exist or you do not have access to it" I went to the HP Connect site and it shows my printer is online and ready to use.  I've checked to make sure

  • Driver Setup problem!k8n user plz help.....

    when i wanna setup the SATA/RAID driver on the beginning of the windows setup, i can only run the 'nVidia RIAD class driver',  if i setup the 'nVidia nForce Storage Controller' as well, my windows setup will occurs error and cannnot setup windows any

  • BPEL partnerlink services not deployed

    Hi, Deploying a BPEL process via JDeveloper required a manual copy of class files (packages) to be put them under ~/bpel/system/classes on the OAS. Does this have to manually configured in JDev before deployment? Thank you for any comment. Mark

  • Where to populate/update Reason code of BSEG in this BADI?

    Hello Under 'Dispute Management' our requirement is that when user creates a dispute case document (UDM_DISPUTE), user also inputs the 'Reason code', so this reason code should reflect on its associated accounting doc (BSEG-RSTGR), in this process i