How to change Profit Center

Dear PS Gurus,
Kindly help me out on this.
My Query:-
I am trying to create a PO using the T-code ME58. When i am selecting the PR and adopting it i get a message as "Profit Center was set to 9999". However i want to post the data to profit center 1300.To do so the system is asking me to to assign the PSG, cost center or other object to that profit center as well.
Diagnosis by the System
You entered profit center 1300 or transferred it from a previous transaction, such as material receipt from an external order. However, the system derived the profit center 9999 from the account assignments.
Kindluy suggest as to where i should go and change the profit center so that i dont get the error message while creating the PO.
Points will be rewarded.
Regards,
Gokul

Dear NAG,
As suggested i checked the Proift Center in t-code OKB9. I found the details as follows:
CoCd - 1000 (IDES AG)
Profit Center - 9000 (IDES Portugal)
Cost Center - This field is blank
Cost Element - 800000
I checked the profit center in the material master also and found that the profit center 1300 is assigned, which is fine. Also i checked the profit center in my project. There too the same profit center has been assigned.
I changed the profit center from 9000 to 1300 in t-code OKB9, and tried making the PO.But still i am getting the same error.I have checked the entire list of profit centers assigned to CoCd 1000 in t-code OKB9 but nowhere i could find the profit center 9999 assigned. I am confused as to from where the system i picking up this profit center (9999). When i checked the details of the profit center 9999 it was found that it is a Dummy profit center but i dont know where it is assigned and from where the system is picking this Profit center.
Request you/anyone to knidly help me out in solving this issue. For your information i am trying this example in IDES.
Please help me out.
Thanks & BEst Regards,
Gokul

Similar Messages

  • How to change Profit center in production order

    Hi guys,
    I have to change Profit center value in production order. Order has been created and released also. How to change, if i directly change system throwing error...Please suggest me in this case.
    RGDS
    Dos

    Then Go to OBA5 enter the KO  Application area
    Add the 367 message and  your user iD enter warning in online and Batch,
    After that You can able to Change the   profit center in Order with warning message in Order

  • How to add 'profit center'  under documents of dynamic selections in FBL5N

    Dear Friends,
    In fbl1n (vendor line item display) if i choose dynamic selection ..left side of the window consists of fields....under document ...'profit center' is there....
    In fbl5n(customer line item display) for the same ,profit center is not there.....!!!
    How to add 'profit center' into the available list in FBL5N
    Regards,
    Madhu..!!!

    Hi,
    Do Ctrl + f8 (Change layout).  In it u have profit center for FBL5n
    Pls. assign points, if useful
    Regards,
    Sridevi

  • Changing Profit Center in Partially Delevered Sales Order

    Dear Experts,
    Can anybody tell me how we can Change Profit Center in Partially Delivered Sales Order?. in Standard, System allows to change  PC in open sales Order without any subsequent documents.
    There is business requirement to change PC in all Open Sales Orders.
    br,
    vgl.

    Try this.
    Go to MASS, Key in Object Type BUS2032, select Table MASSVBAP and click on "Fields".  There select the field "MASSVBAP-PRCTR" and execute.
    Next paste those open sale orders and again execute.  There maintain the required Profit Center on top cell and click Carry out mass change.
    thanks
    G. Lakshmipathi

  • Changing Profit Center in PartiallyDelevered Sales Order

    Dear Experts,
    Can anybody tell me how we can Change Profit Center in Partially Delivered Sales Order?. in Standard, System allows to change  PC in open sales Order without any subsequent documents.
    There is business requirement to change PC in all Open Sales Orders.
    br,
    vgl.

    Hi,
      I think note 580216 should solve your problem. Please read this note carefully
    regards
    Waman

  • How to lock Profit Center in SAP B1 8.8 PL10

    Hi All,
                I am Using Profit cneter feature as Location for one of my client. Totally there are 12 locations( Profit centers). Now I got a situation where I need to lock few Locations (Profit Centers). Bcoz they are non Operative as of now.
                Somebody please let me know how to lock profit center in SAP B1 8.8 PL 10.
    Thank you,
    Dasari.

    Try this for A/R Invoice:
    if @object_type = N'13' and @transaction_type in (N'A', N'U')
    BEGIN
    If exists (Select T0.DocEntry From INV1 T0
    Where T0.DocEntry=@list_of_cols_val_tab_del and T0.Project
    in ('P1', 'P2'))
    Begin
          Set @error = 13
          Set @error_message = 'Project Code inactive!'
    End
    END

  • How to update profit center in posted document without profit center ?

    HI,
    I want to know,
    How to update profit center in posted document without profit center ?
    So that i can get my profit center accouting report proper.
    Thanks
    Nilesh

    There is a long story about profit center accounting. I assume you are using Classic PCA, this means you can see the PCA documents.  And the solutions is below:
         For P/L account, even you don't maintain cost element for it, if you maintain the profit center in the application (Frontend transaction), then PCA line items will be generated for this account.
        For B/S account,  if you maintain the default Profit Center with transaction 3KEH/3KEI, the PCA line items will generated for this account also.
      Hints, don't maintain default profit center for AR/AP accounts, these accounts to be treated in periodic processing.
      First, calculate the distribution/adjust by F.5D, then transfer it by 1KEK. for others account rather than AR/AP, use F.5E
    For you case, if this account is P/L account, but you don't maintain profit center in the transaction, you can maintain default profit center as B/S account in 3KEH and 3KEI, then transfer it subsequently by transaction 1KE8.
    Good Lucky!
    Flex Yang

  • How to add profit center in fbl5n selection screen

    how to add profit center in fbl5n selection screen
    and
    it is save to copy  ddf from sap to cus
    wll it affect anything else

    When you are on selection screen of FBL5N, press (Shift + F4) DYNAMIC SELECTIONS, there you will see a Dynamic selection screen along with your normal FBL5N selection screen, you will find Profit Centre ther, if you don't find Profit Centre in Dynamic Selection Screen you can add the same from the list on the left, search for profit centre, place your cursor on Profit centre and press the Arrow Button(Copy Selected) on top of the list. Now you will find Prfit Centre in Dynamic selection screen, fill the field with values and press save, that's it.....
    Reward points if useful, get back in case of query...
    Cheers!!!

  • How to add "profit Center" in Screen varaint of manual bank Statement.

    Hi all,
    Kindlt tell how to add "profit center" in possible filed of Screen varaint of manual bank statement.T-code OT43.
    Rgds,
    Alok Sharma

    Hello,
    Create a new variant
    Put your cursor on possible fields.
    Click on page down on your key board.
    It will show all possible fields.
    Double click on the profit center.
    It will go to current field in your variant.
    Hope this solves.
    Regards,
    Ravi

  • Change profit center for accounting document on item line

    HI
    I need to change profit center for accounting document on item line, for that purpose I have used user-exit EXIT_SAPLV60B_004, but my new profit center gets latly overwritten in FM CO_DOCUMENT_CHECK (which is called from FM AC_DOCUMENT_CREATE). It gets overwritten from COBL. Is there any way to solve this?

    HI,
    possible reasons are :
    In GR document profit center pulled from PO Material :
    If you have ordered with material code, must check profit center assigned into material by mm03/Plant Data2
    If you have ordered without material code, than check cost center assigned Profit center by 1KE4

  • How to User Profit Center Fucntionality in ISH Module

    Hi,
    In ISH Module, i dont find an option To User Profit Center Accounting fucntionality as i am able to see only Cost Center & Internal Order.
    Kindly Proivde me some inputs how to use Profit Center in ISH module and How to get the P&L Reports profit center wise.
    Thanks

    Hi
    IS-H uses cost centers for revenue accounting, you must deactivate the flag that blocks revenue accountig in cost center master data. The revenues are then posted to profit center assigned to the cost center. There is no place to configure profit center accounting in IS-H.
    With best regards
    Matías

  • How to view profit center documents

    Hi
    kindly update me how to view profit center documents
    Moderator: Please, search SDN before posting

    Try 9KE9 (Display profit center document) or KE5Z (profit center line item report).
    Thanks.
    Rahul

  • How to bring Profit center field in to asset master

    HI,
    We are having new GL Profit center scenario active. My question is
    1.How to bring Profit center field in to Asset Master?
    I am not finding the field"Profit Center" under the configurations step Asset Accounting>Intergration with GL Accounting>Additional Account Assignment objects>>Activate Account assignment objects.
    I know how to do it if it the Profit center field appears in the above step.HOW TO INCLUDE in the above step??Is there any prior activity I need to do?
    2.If I could see the Profit Center field in the above step,then I can add it in T Code ACSET and select the field in Asset Screen Layout,so that it can come up in Asset Master.
    If question#1 can be answered it will be great.
    thanjs
    hinfi

    Hi,
    Until some years ago Profit Center did not exist in FI-AA master data. The Profit Center was derived from other objects (like the cost center) during posting, but there was no way to enter a Profit Center directly in the asset.
    Asset master data has been enhanced with EHP 5 to contain also fields for Profit Center and Segment. To make use of that functionality you need to activate the Business Function for "Segment Reporting" as explained in the Link posted by Jayj before.
    Once Business Function "Segment Reporting" is active, you will be able to make ACSET settings for the Profit Center like for the other account assignment objects. Without the Business Function the field does not exist in asset accounting and therefore you cannot find it in customizing.
    Regards, Michael

  • Change profit center assignment in cost center

    Hi All,
    We have around 20 cost centers and assigned to 10 different profit centers.From 01/01/2011,we would like to change Profit center assignment in cost centers.
    all cost centers postings should post to old profit centers till 12/31/2010 and from 01/01/2011,postings should go to new profit centers.
    What is the best way to achieve this?any help is appreciated.
    Thanks,
    Anusha

    Hi Ajay,
    Thanks for your reply.profit center changes are working with analysis period changes.
    i have one more issue here,i can't change hierarchy in cost center and getting errors..
    Message no. KS042
    Diagnosis
    Field Hierarchy Area to be changed must be unique for the entire interval. You selected a change interval which does not include the entire period. Any change in the field would result in an inconsistency.
    I have try to change time depended field in configuration.system is not allowing for field "KHINR" in OKEG TC.
    any help is appreciated...
    Thanks,
    Anusha

  • Changing profit center from 2001010003 to 2001010004 is not permitted

    Dear Sir
    I had copy a cost centre to create cost centre by t code OKEON, in which profit center not change by mistake. Now I want to detach old profit centre & attach new profit centre with cost centre. However, I am not able to change Kindly help me in this regard.
    Regards...Kaushal
    *Changing profit center from 2001010003 to 2001010004 is not permitted
    Message no. FAGL_ORG_UNITS011
    Diagnosis
    You want to change the profit center from 2001010003 to 2001010004. However, this is not permitted because transaction data already exists for the account assignment object. Changing the profit center in this instance can lead to inconsistencies in FI.
    Example:
    There are costs on a cost center (WBS element) to which profit center A is assigned. If the profit center in the cost center master record were now changed to B and the costs then distributed to other cost centers, the currently assigned profit center - that is, profit center B - would be credited. Profit center A, however, would still have a debit posting.
    System Response
    The action is terminated.
    Procedure
    If you want the change in profit center to be possible, you can convert this error message into a warning message. You do this in the IMG activity Change Message Control (work area FAGL_ORG_UNITS, message number 011). In this case, however, you need to examine the possible effects that the change in profit center would have on the relevant balance sheet in FI.
    With Best Regards
    Kaushal K Maheshwari

    Mate,
    you have 2 options.
    1. Create a new cost center and asign the profit center. after that, distribute the line items from old to new.
    2. Go to OBA5 - Work area "FAGL_ORG_UNITS"
    Press enter
    Here, create the mesage number as 011     Online - select "Warning"
    Now go anc change the Profit center  (This is not actually suggested, but if your Client is okay to maintain, then you can)
    Thanks

Maybe you are looking for