How to Change Proxy Serivce Type Once it is created ?

Hi,
I created one Proxy Serivce based on a WSDL. Now a want to make it messaging type. When I open the configuration page then the type row of the service is not editable. Can anybody help?
Regards,
Anuj

Hi Anuj,
You can't do it on console. Use workshop for this.
Regards,
Anuj

Similar Messages

How to change the billing type Rv to DG

Dear all,
when ever we are doing the return order to a sales we will create a customer credit memo through the VF01 T-code.where billing type will be customize one that is credit memo..
once we save that the in customer G/L we are getting the document type as RV instead of DG.
please tell me how to change the document Type in customer Ledger.
regards,
chethan

Hi,
Just to draw your attention that DG is doc.type used to issue credit memo from FI (t.code FB75), where it does not involve the inventory movement.
Whereas the credit memo generated from OTC cycle (i.e.VF01) involves inventory movement. Ideally, both of these types of credit memos should have different doc. types, so that users can distinguish the returns based on doc. types later on.
So, after explaining the above, please check with your business thoroughly if they really need to use DG instead of RV. I would suggest to create new doc. type 'ZC' and set up through VOFA.
Thanks,
Nirav

How to change the file type from IMOVIE PROJECT to other types of file

how to change the file type from IMOVIE PROJECT to other types of file??
thank you very much for your help=]

I am not sure what you mean, but once you make a project. Then go to the share menu and you can export the project to iDVD, itunes, mobileme, quicktime.
Share export quicktime movie will allow you to export to a variety of codecs. What specific export are you looking to share the movie in? What is the final source that the movie will be displayed?

How to change the paper type in printer settings?

Does anyone know how to change the paper type in printer settings? I'm trying to have the ability to change it to photo paper from Photoshop Elements. I can't find the option in printer settings or through Elements. I'm assuming I could save an additional printer setting for photo printing, but can't find how to even select a different paper type.
thanks!

It would help to know which OS you are running as the answer will be different if it's Lion or the previous OS's. You are not running iOS 5.0.1 on your MacBook Pro so provide the correct information.

How to change the document type while creating a PO by ME59N

Hi,
I have 2 groups of PR's, for group one the document type is picked as NB and PO is created and for the group 2 it should pick as XYZ and PO should be created using ME59N tcode.
How to change the document type for group 2 in ME59N? Which user exists to use to change the document type while creating PO in ME59N?
Can any one suggest me.

Hi,
There a config area, where you can define default PO doc types for a particular Pr doc type. If you maintain the settings properly there, then your requirement can be fulfilled.
SPRO->IMG->MM->Purchasing->Purchase requisation->Define doc types.
This will serve your purpose.
Thanks,
Srinu

How can we change the valuation type for a material created.

How can we change the valuation type for a material created.
Note : All open orders are closed for this material.3
Please guide

Hi,
You can change valuation class, or you can set valuation category for your material master. If valuation category is set you can extend your material master and in this way creating records for different valuation types.
Please try to set the desired changes in your mmr (MM02) > save > SAP will give you error message > push 'Display error' button and you will see what conditions must be eliminated to carry out the change.
- you are not allowed to have open transactional data
- no stock in the current and previous period (using proper posting date in MB1A + 201 you can reduce your stock level to 0, and after that you can set it back by MB1A + 202)
- in case of valuation category setting batch archiving may be necessary
BR
Csaba

How to change proxy???

How to change proxy??

Hi,
It's possible to change your proxy settings by editting about:config, but this is quite complicated.
There's an addon which can help with proxy settings:
https://addons.mozilla.org/en-US/android/addon/network-preferences-add-on/

How to change the project type of inprogress project

How to change the project type of in-progress project, The project type is Testing and need to change it to basic project plan.

Another way is to click on the top right button of the project center ribbon, after selecting the project. Note that this way works for one project at a time whereas toon's reply works for bulk edit.
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

How to change the task type of bdoc in sap crm

Dear CRM Experts,
I am new to CRM. Want to know how to change the task type of Bdoc from update to insert. I am gettind B doc error due to the reason that under object_task the entry is U , whereas i have to change it to I (insert).
Pls provide deatil answer. Points will be given.
Regards
Rajat
Edited by: Gurinder Pal Singh on Jul 21, 2011 10:17 AM

Hello Rajat,
Please provide us more information about the error you have and it's description so that we can help here arounfd here.
thanks
Willie

How to Change the NAT Type of an Apple Router

My dad just bought an apple Router and some new modem. now since i know the router is apple company i want someone to tell me how i change its NAT Type from Strict to either Moderate or Open because its preventing me from connecting to my friends on xbox live. Im also using a Macbook Pro for a computer so its apple software an their shouldnt be any reason this cant be resolved effectively i just need a guide to tell me how to go about fixing this problem.

Unfortunately, the AirPorts are not listed as Xbox Live-compatible routers ... so there is no guarantee doing this will get Open NAT status for Xbox Live!
The following web blog does a great job explaining the NAT issues with Xbox Live! Basically what it comes down to is that although you can get an Internet connection for the Xbox with the AirPorts, you may not get the necessary NAT setting (Moderate or Open) for the Xbox Live! on-line game that you want to play. As such, you basically have two options: 1) Create a DMZ (Apple calls this a Default Host) for the XBox or 2) Configure the AirPort for Port mapping to open the required ports to allow Xbox Live! access ... or 3) Use a compatible router.
Option 1 - Create a DMZ
AirPort Utility > Select the AEBSn > Manual Setup > Internet > NAT
Enable default host at: <Enter the IP Address for the XBox>
Option 2 - Configure Port Mapping
The following ports must be available for Xbox Live to operate correctly:
UDP 88
UDP 3074
TCP 3074
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the Xbox 360.
AirPort Utility > Select the AEBSn > Manual Setup > Internet > DHCP tab
Click the "+" (Add) button to enter DHCP Reservations.
Description: <enter the desired description of the host device>
Reserve address by: MAC Address
Click Continue.
MAC Address: <Enter the MAC hardware address of the Xbox or the MAC address of the wireless depending on how you connect the XBox to the network.>
IPv4 Address: <enter the desired Private IP address>
Click Done.
2. Setup Port Mapping on the AEBSn.
AirPort Utility > Select the AEBSn > Manual Setup > Internet > NAT > Configure Port Mappings
Click the "+" (Add) button
Service: <choose the appropriate service from the Service pop-up menu>
Public UDP Port(s): 88, 3074
Public TCP Port(s): 3074
Private IP Address: <enter the DHCP Reserved IP address for the Xbox you created earlier>
Private UDP Port(s): 88, 3074
Private TCP Port(s): 3074
Click "Continue"

Will someone please tell me how to change the name of a folder I created in Pages and saved to the cloud?

Will someone please tell me how to change the name of a folder I created in "Pages" and saved to the "Cloud"? Thanks.

Go to the open dialog in Pages and select iCloud.
Click on the folder that you created on iCloud to open the folder.
On the lower half of the window (the open folder) click on the name of the folder.
Once you click and select the folder's name it should be editable.

How to change the order type

Dear friends,
Please tell me the transaction code to change the orger type.
suppose we have an order having type Zrox we want to change the order type from Zrox to Zmto what should I do and how can I do .

Hi
For single order use VOV8 and for Mass use T code MASS

Changing by MASS
There is transaction MASS which can be used to carry out mass changes in the sales order and other objects.
Mass Maintenance: (Use to change multiple fields in multiple documents at the same time). I have done mass change for customers; and orders should work the same way too.
1) Try t-code [MASS] and select sales orders & execute
2) Choose the table or tables for your selection criteria and also for fields you want to change.
Then execute. (suppose your selection criteria fields are from sales order header data table and the field you want to change, is in item data table)
3) Put in the sales documents(21000000, 21000001) you want to change and also the items(10) you want to change. click on choose selection fields button From the Pool, move the fields you want to the select fields using arrows.
4)From mass maintenace menu, click on Enter new field values
-click on sales order item data tab and choose the field you want to change.
(for example. I want to change plant for item 10)
-enter the new value (of the plant to be)
-click on Adopt and execute
5)In sales order item data tab, you see the new value of the plant you entered at the top and the old values of item 10 are below.
-click on change field values button. you see all the old values are changed to new values.
-save
Note: it will take some time depending on how many records you have.
Check: Go to [SM37] and see the status of the job you are running and once finished, export the spool file to a spreadsheet.
Before you do mass maintenance, go to the particular table in [se16] and get the results. Then do the mass maintenance and compare the results with this one. If they match, then you are good to go.
Note: If you have any user exits that affect the results, ask them to deactivate the MODCHECKS still you are done with mass maintenance & activate them again.

How to change the Encoding type of a XML

Hi all,
I'm having a XML(generated at run time) with UTF-8 Encoding. If I'm going to parse it, getting an error saying "*Document root element is missing*".
If I change the encoding to ANSI, it parses without error.
How can I change the encoding type of a documnet ?
Any comment welcome.
Kaushalya

There's no such thing as the "encoding of a String". If you produced a String from a sequence of bytes using the wrong encoding, you may not be able to repair that problem by hacking about in your code. You're better off to produce the String using the correct encoding in the first place. Read this for more information about XML and encodings as you appear to be misunderstanding basic concepts:
[http://skew.org/xml/tutorial/]

How to change the data type in the table ESLL for the field USERF2_NUM ?

Hello Friends,
I have a requirement in which one of the change is to convert the data type of the field 'USERF2_NUM' in the table 'ESLL' from 'QUAN' to 'CHAR'.
How do i do it if i have an access to change it..........i think i should also check the impact of the change if done.
Kindly tell me as my requirement starts with this small change.
Regards,
Rajesh Kumar

Thanks for the reply Sowmya.
I would like to know 2 things.
1. Is it ok to change the data type of the field 'USERF2_NUM ' which is in the table ESLL. from quan to char.
2. The table ESLL already has entries. if we change the data type from QUAN to CHAR what is the effect on the existing entries of the table .
Kindly reply me back.
Thanks & Regards,
Rajesh Kumar

How to change exchange rate type for specific pricing condition type

Hello every one,
I have a requirement for billing ie VF01.
currently all the exchange rate are being calculated with exchange rate type 'M' by default.
but now client want it should calculate exchange rate with type 'E' for two pricing condition type for all others it should calculate with type 'M'
Please any body can help me with the exit and code which i can use.
I have checked exits SDVFX008.
but how to change exchange rate with type 'E' only for two conditions.
as changing exchange rate at document header will change exchange rate for all condition type.

You need to assign KOMK-KURST = 'E', for those two condition types. If it had been item number specific, you could have used USEREXIT_PRICING_PREPARE_TKOMK(RV60AFZZ).
Do one thing, put a breakpoint on FM 'PRICING' and then do selective runtime analysis.
Check whether any user exit/BADI/ explicit enhancement are available when condition types are processed in a loop. If nothing is available, try implicit enhancement.
Link to refer for selective runtime analysis - Runtime Analysis for VOFM
Also try with VOFM requirements ( not sure whether changing KOMK-KURST is permissable in requirement as normally we only set sy-subrc values to suppress/allow condition types ). Don't forget to assign requirements against condition types in pricing procedure.

How to Change Proxy Serivce Type Once it is created ?

Similar Messages

Maybe you are looking for