How to change RAW processing options?

Currently editing and processing a large number of soccer images, and am having an issue with both Lift & Stamp, and the RAW Fine Tuning part of the adjustments HUD.
The problem is that I don't want Aperture to perform the edge sharpening routings (I think it looks bad), and I want to use just the normal 'Sharpening' panel. I've figured that last part out, but cannot for the life of me figure out how to turn off the Edge sharpening within the RAW Fine Tuning panel(where the 'Boost' setting is, etc.). I want to use the settings on a whole folder of images, but no matter what I do, the RAW settings keep reverting back to the 'Apple' settings, which don't show up in the 'Manage Presets' window. It's like it is globally performing the RAW window edits based upon the camera model, and there is no way to turn it off.
When I try to use Lift & Stamp, even thought the target image has been altered appropriately, the 'default' settings are applied once stamped onto the folder of images. In the Lift & Stamp window (next to the checkbox), it reads "1D MkIII Camera Default-Apple" or something like that. The only way I can turn off edge sharpening is image-by-image, and I refuse to go that route!
Hope that makes sense, but HELP!
Jeff

If I understand you right, it seems to be working fine here.
I selected one image. Turned RAW sharpening off (unchecked) , saved it as a preset 'no raw sharpening'. Then I selected a group of images, then the lift and stamp tool. 'Lifted' off the 'no raw sharpening' image, checked just the raw fine tuning option in the lift and stamp window, then pressed stamp selected images and volla, no RAW sharpening on any of the selected images.
I believe you can also select an image that has been set to 'no RAW sharpening' and then pick use as camera default and this may keep sharpening off on future imports for that camera, but I have not tried it myself.

Similar Messages

How to change "Your current options" to become our custom label

Dear All,
how to change "Your current options" in the IP Phone display, to become our custom label?
Thanks,
Jerri

Hi jerry,
I don't know if it works out or not but if you want to try then refer below steps
1). download SCCP-dictionary.utf-8.xml from CUCM (tftp -i GET SCCP-dictionary.utf-8.xml)
2). Edit that file which contains "Your current options" as per your requirement and save it.
3). Upload file to all tftp servers (if you have multiple).
4). Restart tftp service of all tftp servers (if you have multiple).
If restarting tftp service don't help you then try to do factory reset of the phone.
Regards,
Nishant Savalia

How to change BPM process message mode

Hi,
I use JDeveloper 11.1.1.6 + BPM plugin. I created synchronous process with some activities. How to change it to asynchronous ?
Kuba

Something similar to this should do
http://orasoa.blogspot.in/2007/03/convert-synchronous-proccess-to.html

How to Change System profile Options

Hi Friends
I want to Change System profile Option "PASSWORD CASE OPTION" from "MIXED" to "INSENSITIVE"......how
can I clear it at the Site Level without logging in E-Business Suite Login Page
Thanks
Edited by: user10365515 on Aug 26, 2010 3:34 AM

Try something like this from backend:
select fpot.user_profile_option_name, fpov.profile_option_value
from apps.fnd_profile_options fpo, apps.fnd_profile_options_tl fpot, apps.fnd_profile_option_values fpov
where fpo.profile_option_id = fpov.profile_option_id
and fpov.level_id=10001
and fpo.profile_option_name like '%PASSWORD%'
and fpo.profile_option_name=fpot.profile_option_name
and fpot.language='US'
order by 1;
you can take a backup and update the table from backend. But, be cautious (oracle doesn't recommend updating from backend).

How to change hal mount options

Sorry if discussed before, i couldn't find this information.
How do I change the default options of hal for mounting external devices? Particularly, I want it to mount every single pendrive with codepage=850.
Thanks in advance.

For the most part you don't need to mess with udev. Udev is for the device nodes themselves, whereas hal is for mounting them (among other things).
Hal can be configured by adding files to /etc/hal/. It's very nasty, though - they're in XML.
The documentation:
http://people.freedesktop.org/~david/ha … -spec.html
Default configuration files:
/usr/share/hal/fdi/
Don't edit them, make files in /etc/hal instead.
My config:
cat /etc/hal/fdi/policy/user.fdi
<?xml version="1.0" encoding="UTF-8"?>
<deviceinfo version="0.2">
<device>
<merge key="storage.policy.default.mount_root" type="string">/mnt</merge>
</device>
<device>
<match key="storage.drive_type" string="cdrom">
<match key="info.udi" string="/org/freedesktop/Hal/devices/storage_model__NEC_DV_5700A">
<merge key="volume.policy.desired_mount_point" type="string">cd</merge>
</match>
</match>
</device>
</deviceinfo>

CS4- JS : How to change the DTD Option - Reg.

Dear All,
I'm struggle to not getting the answer for change the DTD options though Script.
Here I can Load the DTD using script and Validate then Its showing so many Errors, It means the root element is wrong [DOCTYPE] so the way I can change as per the XML Root Element.
Root Element : Chapter
Load DTD -> DOCTYPE name is : text
//================ Start Coding =================================//
app.doScript(File("D:/program files/Adobe InDesign CS4/Scripts/XML Rules/glue code.jsx"));
var myDoc = app.documents.item(0);
var Store = new Array();
var count=0;
myDTDPath = "C:\\Program Files\\Adobe\\Adobe InDesign CS4\\Executables\\Parser\\Macmil.dtd";
myDoc.importDtd(File(myDTDPath));
main();
function main()
if (app.documents.length != 0)
    var myDocument = app.documents.item(0);
    //This rule set contains a single rule.
    var DTDTitle = new Array (new DTDRootTitle);
   with(myDocument)
     var elements = xmlElements;
     __processRuleSet(elements.item(0), DTDTitle);
else
    alert("No open document");
//Adds a return character at the end of every XML element.
    function DTDRootTitle()
      this.name = "DTDValidation";
      //XPath will match on every XML element in the XML structure.
      this.xpath = "//chapter";
      // Define the apply function.
       this.apply = function(elm, myRuleProcessor)
            with(elm)
               Store[count] = elm.validate();
               count+=1;
          return true;// Succeeded
        } //End of apply function
   for(var k=0; k<Store.length; k++)
        var test = Store[k];
         for(var m=0; m<test.length; m++)
          if(test[m].isValid == true)
          $.writeln(test[m].element.markupTag.name);
          $.writeln(test[m].errorMessage);
//========================== End of the coding ==========================//
Question : 1
Manually I can load the DTD & change the DTD Options as per the Root Element of the XML.
After Validate using Root Element Itself, Its working fine. Zero Errors.
Mean while I can Load DTD though Script but I can't change the DTD Options, through Script.
So Please any one can give me the solution for change the DTD Options using script.
Please any one can give the solution, Really I can appriciate for this...
Hope I'm waiting the result for this query....
Thanks & Regards
T.R.Hairhara Sudhan

hello T.R.Hairhara Sudhan
i don't know whether this is write answer or not .
do one thing from active doc get reference of Dtd and from dtd set rootTag = "root tag"
e.g
var dtd = app.activeDocument.dtds[0];
dtd.rootTag = xmlElement.markupTag;
here xmlElement is value for "Validate from" in DTD option
Regards
tahir1987.

How to change Anchor Object Options Status of Object Styles?

hi to all,
here i'm creating Object Style and applying some properties, when i create a Object Style, and the anchor Object options not become true status instead it being in false status how do i change status of anchor Object options of object styles
pls help me
here the i tried code,....
myAnchorFrame.contents =selItem;
     try{
     var rightObjStyle = app.activeDocument.objectStyles.add({name: "RightAlignment"});
     with(rightObjStyle.anchoredObjectSettings)
      spineRelative = false;
      anchoredPosition=AnchorPosition.anchored;
      anchorPoint = AnchorPoint.LEFT_CENTER_ANCHOR;
      horizontalAlignment = HorizontalAlignment.RIGHT_ALIGN;
      horizontalReferencePoint = AnchoredRelativeTo.COLUMN_EDGE;
      anchorXoffset = spaceVal;
      verticalReferencePoint = VerticallyRelativeTo.lineBaseline;
     }}catch(e){
       myCharacterStyle = app.activeDocument.objectStyles.item("RightAlignment");
       myCharacterStyle.anchoredObjectSettings.anchorXoffset= spaceVal;
      try{
     var leftObjStyle = app.activeDocument.objectStyles.add({name: "LeftAlignment"});
     with(leftObjStyle.anchoredObjectSettings)
      spineRelative = false;
      anchoredPosition=AnchorPosition.anchored;
      anchorPoint = AnchorPoint.RIGHT_CENTER_ANCHOR;
      horizontalAlignment = HorizontalAlignment.LEFT_ALIGN;
      horizontalReferencePoint = AnchoredRelativeTo.COLUMN_EDGE;
      anchorXoffset = spaceVal;
      verticalReferencePoint = VerticallyRelativeTo.lineBaseline;
     }}catch(e){
       myCharacterStyle = myDocument.objectStyles.item("LeftAlignment");
       myCharacterStyle.anchoredObjectSettings.anchorXoffset= spaceVal;
      try{
     var L_RObjStyle = app.activeDocument.objectStyles.add({name: "L/RAlignment"});
     with(L_RObjStyle .anchoredObjectSettings)
      spineRelative =true;
      anchoredPosition=AnchorPosition.anchored;
      anchorPoint = AnchorPoint.LEFT_CENTER_ANCHOR;
      horizontalAlignment = HorizontalAlignment.LEFT_ALIGN;
      horizontalReferencePoint = AnchoredRelativeTo.COLUMN_EDGE;
      anchorXoffset = spaceVal;
      verticalReferencePoint = VerticallyRelativeTo.lineBaseline;
     }}catch(e){
       myCharacterStyle = myDocument.objectStyles.item("L/RAlignment");
       myCharacterStyle.anchoredObjectSettings.anchorXoffset= spaceVal;
      if(align =="Left")
       myAnchorFrame.applyObjectStyle(app.documents[0].objectStyles.item("LeftAlignment"), true);
      else if (align =="Right")
       myAnchorFrame.applyObjectStyle(app.documents[0].objectStyles.item("RightAlignment"), true);
      else if(align =="Left/Right")
       myAnchorFrame.applyObjectStyle(app.documents[0].objectStyles.item("L/RAlignment"), true);

Is it the:
   enableAnchoredObjectOptions = true;
As shown here: http://forums.adobe.com/thread/454988?tstart=30

How to change the select-options fields length to long

Dear friends:
   I had develop a program for sent email,and it have a field for fill mail address as below:
   data: lmail like adr6-smtp_addr.
   select-options: mailadd for lmail no intervals.
   my customer complain that the field is too short,but I can not change it to longer,the select-options component limit the visible length , how can i do for this problem!

Dear All:
I had realized this function.
I defined a parameter and a pushbutton to replace the select-option componet,
the code share as below.
data: lmail like adr6-smtp_addr.
SELECTION-SCREEN BEGIN OF LINE.
parameters: mailCopy like lmail.
selection-screen:pushbutton 64(5) pubu user-command mailButt.
SELECTION-SCREEN END OF LINE.
select-options: mailadd for lmail NO INTERVALS no-display.
at selection-screen output.
CLEAR l_count.
DESCRIBE TABLE mailadd LINES l_count.
IF l_count > 1.
    write ICON_DISPLAY_MORE as icon to pubu.
ELSE.
    write ICON_ENTER_MORE as icon to pubu.
ENDIF.
at selection-screen.
CLEAR l_count.
DESCRIBE TABLE mailadd LINES l_count.
IF NOT mailCopy IS INITIAL AND mailadd[] IS INITIAL.
    MailAdd-low = mailCopy.
    Append mailadd.
ENDIF.
IF l_count = 1 and mailCopy IS INITIAL.
    refresh mailadd.
    clear mailadd.
endif.
if sy-ucomm = 'MAILBUTT'.
    perform show_box.
endif.
*       FORM show_box                                                 *
FORM show_box.
TYPE-POOLS aqadh .
DATA: tab_and_field TYPE rstabfield.
tab_and_field-tablename = 'ADR6'.
tab_and_field-fieldname = 'SMTP_ADDR'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
       EXPORTING
            TEXT           = 'SET E-Mail To '
            tab_and_field = tab_and_field
       TABLES
            range          = MAILADD
       EXCEPTIONS
            no_range_tab   = 1
            cancelled      = 2
            internal_error = 3
            OTHERS         = 4.
IF NOT MAILADD[] IS INITIAL.
    READ TABLE MAILADD INDEX 1.
    MAILCopy = MAILADD-LOW.
ELSE.
    CLEAR MAILCopy.
ENDIF.
ENDFORM.

How to change control panel options and shortcuts in CS4

Hi there,
I'm trying to customize the control panel in CS4 and am having trouble with a couple of options:
- I've turned on distribute options but it won't display (only the align options will)
- Where do I find/change the shortcut for "Highlight the first option in the Control panel" (currently cmd 6)
Any suggestions would be much appreciated.
Cheers
Ben

I bet A-M is spot on. As for this lingering issue
macopp wrote:
The issue with the keyboard shortcut is that I can't find the option to edit it - do you know where it is or how to search for a shortcut so it can be changed?
since you know the current hotkey combo (CMD+6), you can call up the entire active keyboard set and search for this string. If you do so, you'll find this:
Product area : Views, Navigation
Toggle Keyboard Focus in Control Panel --- Default: Cmd+6

How to change BPM process service to asunchronous

Hi,
In JDeveloper 11.1.1.6 I created process with synchronous service to start it. Now I need to change it to asunchronous. How to do it ?
Kuba

Something similar to this should do
http://orasoa.blogspot.in/2007/03/convert-synchronous-proccess-to.html

How to change the select options selection text dynamically in webdynpro abap ?

I am using standard interface WDR_SELECT_OPTIONS.... i want to change the Selection text dynamically in my select options.I.E. if the select option is for VBELN field than i want to change its description SALES ORDER Number through Code to some other text.
If anyone can please help me in this.

Hi,
You can achieve your requirement as below
Get the range table of your selection field as below
          data lt_range_table type ref to data.
          wd_this->m_handler->GET_RANGE_TABLE_OF_SEL_FIELD(
                    exporting
                    i_id = 'VBELN'
                    receiving
                    rt_range_table = lt_range_table ).
Update the selection field with new description - 'Your New Text'
          wd_this->m_handler->UPD_SELECTION_FIELD(
                    exporting
                         I_ID = 'VBELN'
                         I_DESCRIPTION = 'Your New text'
                         I_IS_AUTO_DESCRIPTION = abap_false
                         IT_RESULT = lt_range_table ).
You can also pass the other parameters as per your requirement
Hope this helps you.
Regards,
Rama

How to change export report option

hi
Im using Crystal report plug in for Eclipse.
I want to export report to PDF, EXCEl etc...
for that there is Export report option.
I want to customize that export report dialog box.
How can I do that?
I want to set default path to export file.
default extention etc.
want to remove some options like export to rpt...
& is this forum active or not????
I've posted 3 threads but no one is answering me.....
Edited by: Omkar Kelkar on Nov 7, 2008 2:15 PM

Hi,
I need some information from your side.
Which reports are you using?( Crystal Report, Webi or Deski) with exact version of it.
If the reports are running properly from the designer and you are having issue with application or in coding then you can post this question to BO Java SDK Application (Java Development) forum for better assistance.
Thanks,
Sumit Kanhe

How to changed the download options?

When I tried to download from internet or files they send me it automatically opens with itunes. How can I change this?

I'll assume for a moment that you're using Safari to download.
Click on the word Safari in the menu bar at upper left of the screen.
In the dropdown menu, select Preferences (or press the Command key with the , key)
In Preferences, select the General tab (the first one at the left), uncheck the box marked '*Open "safe" files after downloading*'
That prevents downloaded files from automatically opening the assigned Apple application program.

How to change local process chains job priority to A?

hi experts,
there are process chains are running in BW production system.
for independent process chain when i forcefully change JOB PRIORITY from C to A last night it was executed successfully with PRIORITY A, but whereas i have meta chain in that there are some local process chains, though i forcefully change the JOP PRIORITY in PRODUCTION TO A, still those local chains were executed with JOB PRIORITY C only.
Can you tell me the reason and solution to change the local process chain as well with JOB PRIORITY A.
The metachain with JOB PRIORITY shows my userid, and the local chains shows BW_USER id.
Regards
venuscm
Edited by: venu WAD on Nov 18, 2011 6:37 AM

Check what's job priority for particular cube in TA RSRT->double click on your chain->menu Process chain->Attributes->Job Priority. Via this you can set priority as you need.

How to change Keyfigure Aggrgation Option

Hi All,
I am using '0AGE_KYF' key figure with Aggregation: Sum. Now I want to change this option to Maximum.
When i try to change this Aggregation, it's greyed already.
The options for this Key figure
Aggregarion: SUM
Exception Aggregation: Last value
Ref.char.value: 0CALDAY and select as Cumulative Key figure.
Please give your suggestions .

Hi,
If the keyfigure is used in any cubes which are active and containing data, then you can not modify the keyfigure. remove the keyfigure from the datatargets and then go for modifications.
regards

How to change RAW processing options?

Similar Messages

Maybe you are looking for