How to change Refresh Time in a Discoverer Portlet?

Hi,
I have added a discoverer portlet to my main portal page. The minimum refresh time for the discoverer page i could set is 1 hour. Is there any way i could change it to 1 min as this is getting real time data in the database which i would like to display immediately.
Any help/suggestion is most welcome. Thanks in advance.
Regards
Goutam

Hi, i have the same problem.
i have searched both metalink and here but found nothing .. doesnt anybody know how to change the discoverer portlets refresh time interval anything other than 1 hour,1day,1week etc. (they are the only options available)
Any help would be appreciated.

Similar Messages

How to change system time through java program

Hi
I want to know, how to change system time through java program.
give me a idia with example.
Thanks

There isn't any core Java API for this. Use JNI or call an external process with Runtime.exec().
~

How to change system time on Cisco MeetingPlace Express Server

How to change system time on Cisco MeetingPlace Express Server
Model MCS-7825-I4

Hi Vijay,
As per the install guide for MPX 1.x as well as 2.x "Caution! Be sure you enter the correct date and time. You must reinstall the Cisco Unified MeetingPlace Express operating system and application if you need to change the date or time of your server in the future."
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Express,_Release_2.x_--_Configuring_the_Cisco_Unified_MeetingPlace_Express_Server#Configuring_the_Cisco_Unified_MeetingPlace_Express_Server
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/meetingplace_express/1_2/english/installation/guide/iug/mpxinst3.html
HTH
Manish

Why doesn't siri know how to change the time of a reminder? When asked, "Do you want to confirm or cancel your reminder?" Reply, "Can I change the time to a half hour later?" Siri doesn't know how to respond.

Why doesn't siri know how to change the time of a reminder? When asked, "Do you want to confirm or cancel your reminder?" Reply, "Can I change the time to a half hour later?" Siri doesn't know how to respond.

Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W

How to change LACPDU timer setting on Microsoft Network Adapter Multiplexor Driver

We’re installing our first Windows 2012 R2 server, and one of the network settings is different from what’s on a comparable Windows 2008 R2 server, and it's not what our network group would like to see connected to their switches. Both servers have
2 NICs teamed using the LACP protocol and are connected to 2 different switches for high availability. In both cases I just teamed the NICs with whatever driver was on the server.
On the 2008 R2 server (the one our network group likes), it’s an Intel driver, “Intel(R) Advanced Network Services Virtual Adapter”. On the 2012 R2 server it’s a Microsoft driver, “Microsoft Network Adapter Multiplexor Driver”. The setting that
our network group is concerned about is the LACPDU timer setting. Apparently it can be either “fast” or “slow”. What they see on the switches is that on the 2008 Intel driver NICs the setting is “slow” and on the 2012 Microsoft driver NICs the
setting is “fast”. The switches are expecting “slow”.
I spent some time searching on Microsoft.com and other places, as well as poking around on the server, but I couldn’t find that setting or how to change it on the Microsoft Network Adapter Multiplexor Driver. Does anyone know how I can change it?
Thanks!

Hi,
According to my knowledge, we can’t change the value of LACP timer.
Here is a related question,
How to change LACP timer-value on Windows server 2012 Network Teaming, from short to long?
http://social.technet.microsoft.com/Forums/en-US/05e2761f-e165-44f6-9bed-d91e9eeba687/how-to-change-lacp-timervalue-on-on-windows-server-2012-network-teaming-from-short-to-long
Hope this helps.
Steven Lee
TechNet Community Support

How to change the Time Zone in OAM log & audit files

Hi All,
I have OAM installed with all components. By default it is using the UTC Time Zone in the log files and Audit files.
Could any one please tell me how to change the Time according to the place ?
It is an urgent plzzz.
Thanks & Regards,
Vaasu.

could you find how to change the tine zone. i am also getting this problem
thanks

HT1386 How to change fist time sync specifications (change back from icloud to outlook?

How to change fist time sync specifications for calendar (change back from icloud to outlook?

Go to icloud.com on your computer, sign into your iCloud account, click Calendars. Are your events still there? Also, what version of OS X are you running on your mac and what version of iOS are you running on your phone?

How to change the time ??

Hello guys,
I would like to know how to change the time in a 7970G cisco phone, I dont know if the phone gets the date from a server, but checking typing this command: show clock in the CME UC520, date and time shows correct , I powered off / powered on the phone and it remains with the same Wrong time (just time no date), any adivce would be very well received. Thanks!

Hi Gerardo,
Complete these steps on the Cisco CallManager Express in order to display the correct time:
Configure the type 7970 command under the ephone.
ephone 1
device-security-mode none
mac-address 0017.59E7.492C
type 7970
button 1:1
Configure the time-zone command under the Telephony service.
telephony-service
max-ephones 5
max-dn 5
ip source-address 10.1.0.1 port 2000
auto assign 1 to 5
time-zone 8
dialplan-pattern 1 ... extension-length 4 extension-pattern 9000
voicemail 6000
max-conferences 12 gain -6
transfer-system full-consult
create cnf-files version-stamp 7960 Feb 05 2009 12:44:03
Configure the create cnf-files command under the Telephony service in order to implement the change in step 1 and 2.
CME-CUE(config-telephony)#create cnf-files
CNF file creation is already On
Updating CNF files
CNF files update complete
Verify
Comlete these steps in order to reset the Cisco 7970 IP Phone:
Press the Settings button on the Cisco 7970 IP Phone.
Enter the **#** key sequence on the phone keypad in order to reset the phone.
The correct time displays on the Cisco 7970 IP Phone after the reset.
Troubleshoot
Complete these steps if the time displayed on the Cisco 7970 IP Phone is incorrect:
Verify the phone configuration on Cisco CallManager Express.
Display the 7970 configuration file on Cisco CallManager Express. The name of the file is xmldefault7970.cnf.xml, which is located in the system:/its/ directory. Complete these steps in order to display the configuration file:
Log in to Cisco CallManager Express.
Complete these steps in order to display the 7970 configuration file:
Issue the cd system: command.
Issue the cd its command.
Issue the more xmldefault7970.cnf.xml command in order to dump the configuration.
Verify that the time zone parameter is correctly configured . The output of the command is shown here:
CME-CUE#more xmldefault7970.cnf.xml
M/D/YA
Greenwich Standard Time
2000
10.1.0.1
{7970 Feb 05 2009 12:31:07}
2
English_United_States
en
United_States
United_States
0
http://10.1.0.1:80/localdirectory
Complete these steps in order to verify that Cisco CallManager Express successfully sends the 7970 configuration file to the Cisco 7970 IP Phone:
Log in to Cisco CallManager Express.
Issue the debug tftp events command.
Issue the terminal monitor command.
Reset the Cisco 7970 IP Phone.
This output shows the results of the debug tftp events command. The bold text indicates the phone has successfully received its configuration file.
Feb 5 12:38:21.539: TFTP: Opened system:/its/XMLDefault7970.cnf.xml, fd 0, size
1033 for process 287
Feb 5 12:38:21.543: TFTP: Finished system:/its/XMLDefault7970.cnf.xml, time 00:
00:00 for process 287
Feb 5 12:38:24.383: %IPPHONE-6-REG_ALARM: 20: Name=SEP001759E7492C Load= SCCP70
.8-3-2S Last=Phone-Keypad
Feb 5 12:38:24.427: %IPPHONE-6-REGISTER: ephone-1:SEP001759E7492C IP:10.1.0.4 S
ocket:1 DeviceType:Phone has
registered.
Regards,
Justin

42HL833B - How to change system time for Australia

I have a Toshiba 42HL833B that I brought back with me to Australia from the UK.
Everything works OK other than the system time still indicates UK time.
Australia does not come up as a Country option in setup so I have chosen "Other".
There does not appear to be anywhere where you can change the time.
Is it possible to change the time manually somehow?

I dont know if you have users manuals with you but you can download it from here .
Maybe you can find info how to do this.

How to change script time limits in FlashBuilder 4/ error #1502

Hy guys i have a seriusly problem, and i hope that any one to help me.
I'm a developer GIS, and i develop a Web Mapping Application with FlexViewer ArcGIS. I have a widget that call a model that i published in REST. When i run the widget i have error #1502. I know that i change the timeout of my script, but i don't no what i do.
In my flex compiler i have this:
-locale en_US -source-path=locale/{locale} -keep-all-type-selectors=true
How to change the default script time limits to 60s or higher.
Please say me what i do
help
thanks

Maybe try a binding to alter the value.
<fx:script>
   public var nTab4OpenedX:int = 100;
   //Function to change the tab4 opened X value.
   public function ChangeX():void
      //Change the value to 500.
      this.nTab4OpenedX = 500;
</fx:script>
<s:SkinnableContainer id="tab4" x.tab4opened="" x="0"

I have an intel 2006/7 MAC. I can't figure out how to change the time zone. There are no cities to choose from in Mountain time. and when I choose other times..the time zone still does not change. Please help

My time zone is not adjusting.....I don't see how to change it, in the first place..I'm given a list with no Mountain time inclusive cities.

Try this to learn about using keys:
http://www.apple.com/support/macbasics/
You can also use your PC mouse.
As for iPhoto, it sounds like you were trying to move files around in the library. That is a bib no-no in Aperture or iPhoto.

How to change server time?

Can some one guide me how to change the server time in Solaris 10.
Actually i need to advance the server time to 15 mins.
thanks!

Take a glance through the man pages for date.
It's been a couple of years since I last used it,
but when I did, it was for the express purposes
of changing the system date to a specific time.
It was on an old SB100 with an unpatched OBP.
Their system clocks would wander all over the place
until the problem got fixed with an OBP update.
If I recall, the command syntax I used was something like ...
# date HHmm.ss <enter>
For example -- "date 1832.50" would be for 18:32:50 o'clock of the system's current day and timezone.
... then I used the simpler date command syntax to check up on the results.
# date <enter>
Other forum contributors may have their favorite suggestions, as well.

How to change the time scale on Dynamometer's profile

I am using LabVIEW 7.0 and running the Dynamometer Kit. I have tow questions:
1) How to change the x-increment on the time scale? Right now it is fixed at 0.25 minute per mark. Changing 'x-increment' under VI Hierarchy only changes the mark before the origin (0,0). For example, I changed the value of 'x-increment' to 0.1, I get a -0.1 on the x-axis, however, everything else remains at 0.25 increments.
2) How to save/load the results of the profile? In other words, how would I save the data into files that I can recall later.
Thanks

Hi,
To address your question, are you referring to the attached dynocode.llb files? I didn't see a waveform graph or chart in these files, but I am assuming your x-increment question is pertaining to a graph you are using. To set the marker spacing on the x-scale, right-click on the front panel where your graph is located and select Properties >> Scales. Then, there is a drop down to select the x or y-axis. Choose the appropriate one and deselect Autoscale. You can then set the offset and multiplier options. The multiplier will set the marker spacing (x-increment) on the graph. Sometimes, the waveform graph doesn't modify correctly and you might want to replace it with a new waveform graph instance. Tight-click on the graph, choose Replace and then
navigate to the Waveform Graph.vi.
To address your other question regarding saving/loading the profile information, I would suggest looking at the Read From Text File.vi and Write To Text File.vi example programs that are in the LabVIEW Example Finder under Help >> Fundamentals >> File Input and Output.
Let me know if you have any further questions or if this does not resolve your issue.
Thanks again and have a great day!
Kileen C.
Applications Engineer
National Instruments
Attachments:
dynocode.llb ‏5997 KB

How to change system time w/o affecting iCal

When I travel to another time zone with my laptop I would like to be able to change the system time that appears in the menu bar to the local correct time. However, I do NOT want this to cause any changes in my calendar times. I use Calendar only for my home appointments so do not want those to change. Is this possible? Thanks!

Hey bobio,
Thanks for the question. If I understand correctly, you want to change your time on the computer but not the time on the Calendar. I would recommend that you read this article, it may be able to help the issue.
You can change the computer time and follow this to view Calendar events in your normal time.
Calendar: View all your events in a different time zone
By default, Calendar events are displayed in your computer’s current time zone (set in Date & Time preferences).
Thanks for using Apple Support Communities.
Have a good one,
Mario

How to change wait time-- Urgent

Hi,
In monitor screen, under status, I am seeing the wait time date as next month date.
So the technical status is yellow in color though the data is loaded.
Where can I change this time.
Thanks in advance

Hi,
When changed Timeout time in Info package it will reflect to particular infopackage only .
If u changed in RSMO tcoe and settings- menutab
Waiting time upto status incorrect - it will reflect to all infopackages.
We can maintain the value in years, months, days,hours,minutes and second also.
Regards,
Krish

How to change Refresh Time in a Discoverer Portlet?

Similar Messages

Maybe you are looking for