How to change render settings...

Hello,
I need help with FCP. I have noticed that I need to render almost every time when I add something or delete something. I wanted to know if there was a way to change the render settings so you don't need to render as much? Thanks very much in advance!

The faster the Mac you have the more RT playback of unrendered material you get whether from using clips that don't match your sequence settings, or from adding filters to clips. But to make your life easier here, transcoding might help if you are mixing formats... i.e., export any material to the settings you're using in your sequence so that they match. Use the exported files as source...
Jerry

Similar Messages

Changing Render Settings

If I change my render settings to lower resolution and frame rate in order to speed the time lost while waiting for things to render, then I edit the sequence in that lower resolution render, how do I go back later on in the same sequence and make it render at full resolution?
I changed render settings and then rendered, but when I go back and change the sequence render settings back to full resolution, the clips rendered in the lower resolution remain as lower resolution. The clips don't suddenly un-render, for example, requiring that they be re-rendered at the new higher resolution settings.
FCP 4.5

Use Render manager and trash all of the appropriate project renders, then re-render with the new settings.
rh

How to Change Security Settings on an Existing Wireless Network

I'd like to change existing network security settings to WPA2, AES or at least to from TKIP to AES.
I'm familiar with browser access to the router and with how to change the settings on the router.
My question is how to do this as painlessly as possible for the network. Step by step would be nice
I guess first I have to change the router settings using the computer running Easy Link Advisor?
Do I then have to disconnect/reconnect that computer?
Do I have to disconnect every other computer and then connect each one again with the updated settings?
Will the change in security settings affect my print server? If so, do I have to set it up from scratch in ELA?
For the record, I have a WRT-300N and the print server is a 54g.
Anyone who reads this may also want to look into recent news. May not be a big deal, but a vulnerability of WPA/TKIP has been identified.
Thanks in advance to anyone who answers.
Solved!
Go to Solution.

Do I really need to set security for my wireless connection. I searched for available WiFi in my area prior to installing my network and none were available. Does that matter?
The network never did function right from the start. My desktop is a Dell Inspiron 510n and is not wireless capable? So when I tried to add my HP mni 1000 it did not let me access the Internet.
So now I have an unsecured network. Am I vulnerable to attack?
Which leads me to my real question How do I change the security settings?
Oh yeah, my home computer crashed due to a program I downloaded, so I do not have access to it. i'm a mess....
Thanks,for any help
Phil

How to change screen settings

Hi
I have a small issue that in ABAP editor, screen is displaying like script editor and allowing me to delete the lines one by one ratherthan deleting all the lines at the same time.could u plz tel me,how to change the settings to allow the user for multiple lines selection?
I m using the version 4.5b.
Thanks & Regards
Ravindra

Hi,
refer u may get an idea.
https://forums.sdn.sap.com/click.jspa?searchID=4333019&messageID=3617437
Regards

Does anyone know how to change the settings for siri as all he keeps saying to me is he can only look up businesses in the u.s

my siri seems to be a bit confused as he thinks im in america but im in northern ireland is ther anyone who knows how to change the settings as i cant find them alsao he doesnt understand a word im saying

To use another iCloud backup, you have to erase all content and settings or restore it. Either gets you to the backup/setup page.
http://support.apple.com/kb/HT1766

NW04s: How to change column settings like 'do not adjust' 'fit to resuts' e

In the new Analyzer, old report format: how to change column settings: do not adjust, fit to results, etc.?
Regards
-Bala

Hello,
In the properties dialog of the Grid and some other items, there is a checkbox by name "Autofit". When this is checked, the result columns are expanded to correct data widths.
Regards,
Manjunath

How to change the Settings in the Graphic structure. T Code CN41

Hi,
How to change the Settings in the Graphic structure. T Code CN41
Iam using the T Code cn41 to know the diff in Duruation, work, remaining duration in diff project version. I am getting the Graph/curve with standard settings and system is not allowing to change the scale (Y-X Axis) the way i required.
Pls advise me.
Thanks in Advance.
Raju

Hi,
Thanks for the reply. But please clarify a bit. Please below is my requirement.
As per the SAP Avilable screen in T Code CN41,it is showing the scale of 1 and 2 only.
Assume if it 12 Days as actual work VS Actual duration of 265 Hours .It is showing 2 = actual work of 12 days and 1= Actual duruation of 12 Days. I want to have the scale in such a way that, we should be able to see from 0-100-200-300 Hours and Days 5-10-15-20.
Can u pls advis how can i get these and also give me ur mail id so that i can send u the screen shot also.
Regards
Raju

How to change Preset settings (CS4)

Hello everyone,
I'm going to make a video with Adobe Premiere CS4 and I need to know how to change Preset settings or however it is called, because I think none of the Presets match with my videos (tried some and my videos were bigger or smaller).
My videos are .mov, 800x600, made and rendered in Autodesk 3ds Studio Max 2010 (3D Program).
Could someone please help me? I don't know if there's a preset for me or if I have to change settings or something like that (and where). Yes, I'm new! I'm from Spain if you need it.
Feel free to ask anything you need, of course.
Thanks in advance,
Marta

Marta,
Welcome to the forum.
In CS4 and CS5, one can set the Preset at the Sequence level. Before, it was more global, at the Project level.
In Sequence New, you will choose the Desktop Preset, and then you can alter almost every displayed attribute, such as Frame Size, or Frame Rate, etc. you want to match your Sequence to your source footage 100%. After editing with those attributes matching, you can then Export to a desired output setting with AME (Adobe Media Encoder). You choice of Desktop, allows you to customize the settings to match. I wish that Adobe had named it "Custom," as the term "Desktop" is a bit abstract, though it has been around for a very long time.
Good luck, and do match your Sequence settings (Desktop) to your source footage.
Hunt

HT1296 cannot sync the calendar on my ipad mini with my main imac computer. the settings on itunes say that my ipad is syncing over the air but it is not unfortunately. i cant see how to change the settings if need be. would appreciate help. thanks

i canot sync the calendar on my ipad mini with my main imac computer. the settings on itunes say that my ipad is syncing over the air but it is not unfortunately. i cant see how to change the settings if need be. would appreciate help. thanks

i have done this on my ipad mini and my imac but they are still not syncing. my iphone 4 has the icloud symbol but it seems to be unresponsive to touch, I cannot get it to highlight or turn-on. Bit confused.

How to change colour settings on Satellite Pro P300

I just got my new laptop and can't for the life of me find how to change the colour settings in the monitor.
On my old desktop there was a button on the monitor.
Being a first time laptop user im going nuts trying to find how to change my monitor settings...
If anyone can help id be so grateful

Please dont mix the notebooks internal monitor with the external desktop PC monitor.
You will not find any control unit like on the external monitor which would help you to change the color.
I dont know what graphic chip your notebook uses but my notebook supports Intel graphic card and the preinstalled Intel graphic media accelerator (in control panel) provides some settings for color correction;
The settings are; color, gamma, brightness and contrast
There you can set the values between 0 and 100
Maybe this is what you are looking for

How to Change Finder Settings in All Windows?

Hi All,
Similar to the original post found here: Re: How to Change View Options for ALL Finder Windows?
I'm trying to change my finder settings across all finder windows... I tried the solution posted in the above thread but get this message in terminal. I'm not all that computer savvy when it comes to terminal so not sure what it means... Perhaps someone knows of a different and/or better solution?
Any help would be much appreciated, thanks and take care!
Dave

Yup got it back after waiting, followed the remaining directions, but didn't work for me... not sure why? Upon rebooting folders do not change after I readjust settings and click 'use as default'.... strange... I even tried that other line of code another person posted later on in the previous thread.

When closing and reopening, my tabs aren't restoring like the once did. My history is only keeping one day. Need to know how to change these settings.

When closing and reopening Firefox, my tabs aren't restoring like they once did. I used to have all my tabs restore each time I opened Firefox. Now it starts with one fresh new tab and all my others are lost. I do a lot of research so this is important.
My history is only displaying one day even though I have never changed my settings even after I updated it last year.
Need to know how to restore these settings.
***OH! special note: I can't use the recently closed tabs or recently closed windows because its a grayed out option****

Are you using cleanup software like CCleaner?
If you use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.
* http://kb.mozillazine.org/Session_Restore
There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Java Plug-in 1.6.0_05 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

How to change sequence settings without CC 7.1 update?

Well, i was hoping that Adobe will release 7.1 update on October 15th, as promised on some websites. I don't recall, maybe it was Creative COW or any other.
That's why i have created 720p PRORES proxies for 9x multi-camera live performance shoot which lasts for 2 hours for lag free, fast editing.
I have sucessfully edited it and promised my clients that on October 16th they will get the whole show in 1080p, high quality.
So, there is no update yet, and yes, i can relink files to original 1080p, but the multicam sequence is capped to 720p and i simply can't find a way to change it's size.
The old fashion copy/paste way from one sequence to another does not work, since 720p sequence is linked to multicam edits. In CS6 i could edit ".prproj" file in text editor to change any properties (including sequence properties), but right now in CC, .prproj file contains binary data only, so i can't do it that way either.
Maybe someone knows any other way to change sequence settings right now, or what is the exact day for 7.1 release?
Thank you!

Hi Paolon!
You need to extract your .prproj using WinRAR to a text .prproj file, then use some text editor such as Notepad to search and replace sequence dimensions
For example find "1920" and replace it to "1280" if it looks like Īt belongs to a sequence definition.
I don't recall how it was called, maybe "VideoFrameRect" or something similar.
First create some very simple project to experiment with, and always make a backup copy in case something goes wrong

How to change jumper settings on Toshiba hard drive?

Hello,
I have a 1.33 ghz 12 inch Powerbook model. Recently, I had been experiencing occassional failure on the internal 60GB hard drive, and I decided to have the drive replaced altogether before the whole thing died. I've got a new drive in the computer now - and wanted to get back onto the old one to access some information. I picked up an external 2.5" enclosure to access the drive as an external drive - the only thing is that I believe I have to change the drive's jumper settings to "slave," and I can't figure out how to do it for the life of me. Anyone know how to change this setting on these internal drives, or what I need to do in order to access my information using an external drive enclosure? Thanks so much...

What kind of enclosure is it? For more than one HD so it would be the second one? Otherwise you can just put the drive in the enclosure and use it over FW or USB. Single HD external disks work afaik best with the HD set to master or cable select -> most times no settings change needed.
Mac mini G4 1,42/512/80, PowerBook G4 12" 1,5/1,25/80 + 23" ACD Mac OS X (10.4.7) as well as iMac G4 17" 1,25/2/320, PM G3 DT 500/576/20 + 17" Syncmaster 710T

How to change render resolution of After Effects project in Adobe Media Encoder for an H264 preview?

I'd like to render a 1080i comp at half resolution or third resolution in AME to speed up render times for low-res previews. I just had a low-res H264 preview take 5 minutes to encode in AE, and 28 minutes in AME.
This is easily accomplished in the After Effects render settings. However, the "video" option in AME seems to imply the project is encoded at that resolution, not rendered at it.
I went into AE and changed the setting in the composition viewport to "half", but when I queue it up in AME, the "Match Source" button still indicates 1080.
What is the correct method to get the results I want?
I'm currently using AE CC and AME CC on Windows.

Thanks for taking the time to answer this question. Knowing this isn't possible at least narrows my options down. It would be helpful to provide some kind of list of what comp settings carry over into AME from After Effects. Is it essentially everything that is enabled in the Timeline? (I know that motion blur settings do.)
I'll put this in a feature request, but yes, we need the other half of After Effects Render Queue in AME in order for AME to be a good replacement for rendering from AE. I'll give you my thoughts on why Render Settings are essential before you would actually want to render with AME instead of doing so because you have to (either because you want to render in the background, or need a codec that has been removed from AE.)
1. Speed: Simply applying a Render Settings preset is much faster than manually setting motion blur, frame blending, work area, etc.
2. Reliability: Not being able to apply a Render Settings preset at the time of render is a recipe for missing a crucial setting buried in a comp, then having to redo a render and wasting time.
3. Features: As noted above, there is no way to approximate Render Queue's ability to change resolutions at render, which results in a lot of wasted time when that feature is needed.
Render Settings I think are crucial to making AME rendering worthwhile for AE users:
1. Rendering resolution
2. Work Area/Entire Composition toggle
3. Field Rendering (wait, does this mean AME can't currently render to fields?)
4. And PRESET ability these settings, so I'm not doing them manually every time.
I realize that your team clearly doesn't spend the same amount of time I do making low res H264 previews and sending final files out in H264 format, so you don't appreciate the impact of the changes you made. Moving to AME for that stuff is a real inconvenience, but implementing the settings above could help soften the blow.
Thanks,
Jerry

How to change render settings...

Similar Messages

Maybe you are looking for