How to change "_review" at the end of the file name in Acrobat XI Pro

For our business workflow, we need to be able to change the "_review" at the end of the file name when creating shared-review PDFs. Older versions of Acrobat Pro allowed me to customize the ending of the file name before it was saved as a shared review PDF. For example, when we send the initial review PDF, we append "_Review"; when we send a mark-up PDF (to capture changes before the next revision), we append "_Mark-Up". However, the XI Pro version does not (it automatically appends "_review" and doesn't give an option to change it).
Is there something I need to configure in my settings to allow file name changes for shared-review PDFs?

So why did you said that in your first posting? My glass sphere is out for cleaning...
Instead of type c use strings and add spaces until they have the appropriate length.
loop at outtab assigning <pout>.
while strlen( <pout>-val ) < 135.
concatenate <pout>-val `` into <pout>-val.
endwhile.
endloop.

Similar Messages

BUG: Extra characters at the end of attachment file names

I received complaints that my attachments didn't open on the PC's of the recipients. After I saw the messages I noticed there were extra characters at the end of their file names. That's why they wouldn't open. When I looked into my sent mail folder it was there as well. The addition took place when I sent the mail, while composing everything looked fine. It took me a while to realize the pattern. There was one extra for every non-ASCII character in the file name.
Apparently Mail.app is using two different libraries. The other one counts the non-ASCII characters as two while the other doesn't. I don't know whether Finder still uses MacRoman or Unicode, but this seems to relate to double-byte characters.
The short term solution is to use only ASCII for file names, but that's not what OS X is all about.

The class files are broken. Recompile them. If you're uploading them, doublecheck if the FTP program used doesn't do mad things with binary files.

How to replace the end of a file name

I have a seriously dumb question...
I have a row of thousands of file names (top-down, row a), these names are, for example, "photo-1.jpg" and I need to change the .jpg to .nef. How can I accomplish this?
thanks!!

Or just use this 'Find Replace in Selection' Automator Service (Dropbox download) without having to fuss about taking columns out to another app, fiddling with them there, and bring them back in.
It is just a short AppleScript that, after a quick installation, will look like this in your menu:
Select the cells where you want to make the replacement, choose 'Find Replace in Selection' from the menu, and enter the find-replace values when prompted. In your case you will see something like this:
Hit OK and you're done.
One-time installation is just a doubleclick on the .workflow package.
Depending on your settings you may have to go to System Preferences > Security & Privacy and click 'Open Anyway'.
'Install' simply moves the script to your Library > Services folder so it will show up in your Numbers menu. It doesn't do anything to the innards of your computer. If you want, you can check out the script first by choosing 'Open with Automator'.
Since this (obviously) changes values in your document you might want to test it first to make sure it is working as you want.
If you need to get rid of it then in Finder hold down the option key, choose Go in the menu and navigate to Library > Services, where you can trash it the way you would any other file or package in Finder.
SG
Edit: use jpg and nef rather than .jpg and .nef.

Sender File adapter - DataTime stamp at the end of aarchived file name

Hello,
I am archiving the file once PI file sender adapter picks the file from source directory.
The file is archived in the archive directory as <Date-Time-SSS_>FileName.
I need to append the value <Date-Time-SSS_> after the file name.
So archived file looks like FileName_<Date-Time-SSS>
How can I achieve this? Appreciate your help for valuable suggestions.
Thanks,
Namadev

Hi Namdev,
Generally when we archive file then in sender CC we just put the processing mode as Archive and specify the Archived directory name in Archive Directory section. in that case when the Communication channel pick the source file then after picking it it remove it from source directory and put it into Archived directory without making any change in the file name.
so if the file name is A.txt then in Archived directory also its name will be A.txt . However if you want to make any change in the name of the source file in the archived directory then you have two write Unix or DOC scrpt( depending upon your soure server )
if your source server is Unix then write shell script otherwise dos scriprt
.after wrtting the shell script just place in the archived directory or your source directory and call it in by mentioning it in Coomand Line section of your sender CC. You can easily search and get the required shell script .
Regards,
Saurabh

How do I change the color of the tabs arrows at the end of the bar so I can see them better?

How do I change the color of the tabs arrows at the end of the bar so I can see them better?
== This happened ==
Every time Firefox opened
== Every time Firefox opened

Try to find a different Firefox theme (Tools > Add-ons > Appearance/Themes):
*Firefox 3 theme for Firefox 4: https://addons.mozilla.org/firefox/addon/firefox-3-theme-for-firefox/
*Strata XP: https://addons.mozilla.org/firefox/addon/strata-xp/
*Colorful Tabs: https://addons.mozilla.org/firefox/addon/1368

Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

Thanks. I've tried this and apparently the template I'm using is one of those where it doesn't work. I've tried dragging it as well as cutting a pasting but it always travels back to the end of the book. Maybe I can try changing the template temporarily, move the preface page, and then convert back to the original template. I'll experiment a little.

How do I duplicate layers & groups without automatically adding a "copy", "copy 1", "copy #" at the end of the new group?

How do I duplicate layers & groups without automatically adding a "copy", "copy 1", "copy #" at the end of the new group?
It's been pestering me for quite a while now, since I often work with the same elements over and over again. Its frustrating to have to change the name of each layer manually, especially if I'm copying a whole group.
Is there a setting in Photoshop or perhaps an external script that can help fix this for me?
Cheers,
Qiming

There is no way to defeat this within the program itself. Here's the workaround:
Duplicate the file (from the Image menu).
Drag the Group or layers from the Layers list from the duplicate to the image window of the original , while holding down Shift.
That will make a "copyless" copy and reposition the copyed material in the exact same position it was on the original.

The + sign at the end of the tabs no longer takes me to the last current tabs or websites it instead takes me to google search. How do i get it back to my last tab for the website I visited?

I used to get the last websites or my frequent websites I visited when I clicked on the + sign at the end of the tab bar.. Now all I get is a google search page.. How do i get it back to the other way it was?

A new tab opens by default as a blank tab (about:blank).
If that isn't the case then an extension has changed that behavior.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Do or did you have the Google Toolbar installed?
* http://www.google.com/support/toolbar/bin/answer.py?answer=115561 Web-browsing tools : Google new tab page and most visited websites

When editing an image in Photoshop from Lightroom then saving it back to Lightroom, how do i get the image to go back and sit next to the original? Mine is going to the end of the folder. Thanks Karen

When editing an image in Photoshop from Lightroom then saving it back to Lightroom, how do i get the image to go back and sit next to the original image? Mine is going back to the end of the folder. Thanks Karen

Hi Karen
You may the sort set to Custom. Click the dropdown menu on the toolbar (to the right of the word sort) and change to capture time.
If you can’t see the toolbar above the filmstrip press the T key. Press T again to hide.

Firefox 8 puts new tabs opened from links in another tab at the end of the tab list, NOT next to the tab it came from like in V3.6. I want it next to the tab it came from. How do I get it to do this?

Question as stated, sums it up. When I click the mousewheel on a link in a tab I want a new tab open with that link and I want it next to the tab I clicked the link in just like Firefox V3.6 did. Firefox 8 is always opening the new tab at the end of the list and boy is this annoying!
Please tell me how to fix this.

type in the address bar '''about:config'''
then press the button '''i'l be careful i promise'''
then type in the bar '''browser.tabs.insertRelatedAfterCurrent'''
then '''Right-click''' click on it, and select '''Toggle''', and you see changing the value from True to '''False'''.
exit firefox and restart.
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

TS4592 I have an ibooks file that when I make a change to a page in one chapter it throws a bunch more pages in at the end of the chapter from another chapter in the book. Anybody have any ideas what is going on?

I have an ibooks file that when I make a change to a page in one chapter it adds additional pages at the end of the chapter from another chapter. Any ideas what is going on and how I can fix this?

Text pages? from what you say you are getting the auto flow function to add pages either because you have flowing text or because you have a lot of blank lines as you would if you tap return to move blank space around.

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

How to add a sub report at the end of the main report whilst grouped

Hi!
I have a main report that is grouped by the Customers name and then details of transactions they did with the company.
I need to add a letter at the end of each group for each customer (With their name displayed in the letter). I tried adding a sub report in the report footer, but it only appears once at the end of the report, rather than at the end of each group for each customer.
How can I achieve the desired result?
Regards
Vik

Vik,
You are on the right track with the sub-report.
1. Create your letter in a separate report.
2. Add the Letter Report to your original report as a sub report in the group footer.
3. Set the report links on the "Group By" field.
This will give you a letter record for each report record with the same grouping as the main report.
Hope this helps,
Jason

How to calculate the total of a calculated column in a list view at the end of the view?

I have a view with the following columns ProductName, Quantity, Price, Total The total column is a calculated column which is the product of quantity and price. I want to place the sum of the total column by the end of the list view. I can do this with
the price and quantity but not with the total column. how do I do this?

You can use SharePoint Designer and calculate the total in xslt view. Refer to the following post for more information
http://community.bamboosolutions.com/blogs/bambooteamblog/archive/2009/04/24/how-to-total-calculated-columns-in-a-sharepoint-list.aspx
http://blog.metrostarsystems.com/2012/12/03/jennys-sharepoint-tip-sum-calculated-columns/
Cheers,

The current version of Firefox moves the tabs. Now the focus moves off the end of the row. I think this runs counter to the point of having tabs, if you can only see one at a time. How do I fix this

The tabs bar on 3.6 Firefox now focuses on the last tab in the row. This means that I can only effectively see one tab, unless I use the arrow button to scroll back through all the tabs. I am used to scrolling some, when there are a dozen tabs open, but How do I make the tab bar static, they way it used to be, so it stands still when I click on the last tab in the row.??

Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
I haven't tried installing the latest beta. Maybe that would fix the problem.
Toddo

How to change "_review" at the end of the file name in Acrobat XI Pro

Similar Messages

Maybe you are looking for