How to change Sales office in Bussiness partner details

Hi ,
      I am unable to make changes in Bussiness partner details ie in Tcode BP .Since the Sales area data has been desabled .
So can any one guide me how to change sales office in BP
regards,
divya

Dear Anirudh ,
When i checked the org Structure ,there same user has been assigned to two sales offices.
So when it is taking the sales area data ,it is capturing the data from jammu sales office rather than Chandigarh.
I can't change the User that has been assigned for more than 2 sales offices b'cos of the restriction of User-id
So please help me.
regards,
divya

Similar Messages

  • How to exclude sales office for combination sales order type/division?

    Hi experts,
    I would appreciate if you could advise: How to exclude sales office for combination sales order type/division in ECC 6.0 ?

    Hi
    Standard SAP functionality would not be able to cater to this. Ideally create a Z table with sales order type and sales office combination. Put in entries for combinations that are allowed. In Sales order program MV45AFZZ use the exit USEREXIT_MOVE_FIELD_TO_VBAK. In this exit write down the logic passing the sales office determined and the order type and check if the entry is there or not. If the entry is there then it should go on to the next step. If it does not then pass an error message. You need to use the help of your ABAP er for this.
    Thanks
    Indranil

  • How to make Sales Office field mandatory in VA01 initial screen?

    Hi,
    How to make Sales Office field mandatory in VA01 initial screen? I mean in the first screen where we enter the document type and the sales area?
    Regards,
    Ajit

    Dear Deepak,
    Thanks for the clarification.
    But, as far, I have understood the query - it is very simple and that is..
    Whenever one creates a Sales Order (T.Code: VA01), Parameter: Sales Office needs to be mandatory (for all Sales Order, irrespective of Customer Account).
    Until-unless, user won't enter the parameter: Sales Office, System will not lead to next page (now, here we need to enter Customer/ material etc...).
    I have answered the query, in this regards, only.
    Best Regards,
    Amit.
    Note: Pls. correct me, if I am wrong. Thanks for everyones guidance.

  • Changing sales office in sales office using save_document user exit

    Hi,
      My requirement is to change the sales office to 109 based on some conditions.
    Here i am using FORM USEREXIT_SAVE_DOCUMENT   user exit in the sales order to do it.
    but it is not taking this value .
    Can any one suggest me any other place i.e. user exit where we can change sales office depending on some conditions.
    Thanks & regards
    Manjari.

    You have to use userexit 'USEREXIT_SAVE_DOCUMENT_PREPARE' because when exit 'USEREXIT_SAVE_DOCUMENT' is called all the order data has already been submitted into update task. So if you want to change data in the order and have it saved with it you need to use 'USEREXIT_SAVE_DOCUMENT_PREPARE'.
    Regards,
    Michael

  • Does anyone knows how to change Microsoft Office 2011 language default from Italian to English ???

    Does anyone knows how to change Microsoft Office 2011 language default from Italian to English ???

    Are you talking about spellcheck or the language of menus and dialogues and menus?
    In general, the best place to search/ask about MS product issues is the forums they run for that:
    ttp://answers.microsoft.com/en-us/mac/forum/macword

  • BAPI to change sales office of the contract

    Hi to all
    I want to change sales office of the contract(VA42), through BAPI.
    could any one suggest me which BAPI i have to use.
    Now i am trying to use BAPI_CUSTOMERCONTRACT_CHANGE.
    but its not updating.
    regards
    raadha

    Hi Radha,
    Have you saved the change properly? Are you calling the function module 'BAPI_TRANSACTION_COMMIT' after making the changes ?
    Let me know if you are doing the same.
    Thanks,
    Samantak.

  • [CRM] Change sales office from within an order

    We've been trying to get the following to work... as you might guess, so far without success.
    From within a CRM order, if we change the partner number for the department a check is being done whether that partner belongs to the same sales office. If that's not the case, the sales office has to be adjusted.
    Since this might have an effect on authorization, the changing of the sales office has to be done in a separate job (action). In this job, I do the following:
    - Retrieve data on the object
    - crm_order_read for that object
    - select the correct sales office
    - prepare the crm_orgman structure with the new data
    - crm_order_maintain with the crm_orgman and inputfields tables
    - optionally commit work, bapi_transaction_commit etc.
    For as far as we can see, the data is correct. However nothing is being changed. Ideally what I'd like to do is break into the process, change the object that's being processed in memory, and let the system do its job.
    What we've also tried is (shame):
    - Retrieve data on the object
    - crm_order_read for that object
    - select the correct sales office
    - direct update the corresponding tables with the new values
    This works, but as soon as we return control to the system, the changed values (verified, if we look at the tables the values are changed) are reset to what they were.
    It's taking way too much hours for something that should be (in my eyes) a pretty simple action. Any suggestions? Thx in advance!

    Hi Egbert,
    Please take a careful look at the GUIDs you are using: if you are using the orgman structures, the REF_GUID is not the ORGMAN-GUID but instead the ORDERADM_H-GUID. Can you confirm if this has been checked and if it then still is not working? The COMMIT_WORK BAPI is also not necessary.
    Kind regards,
    Joost Janssens
    PS Please reward points if this reply helped you!

  • How to restrict Sales office and Sales Group.

    Hi All,
    I want to restrict the users from changing the sales office and sales group in the sales order.
    Is there any standard way to achieve this or do we need to do with User exit??
    Please help.
    Thanks,
    Pavan.

    hi
    there is no standard settings for estrict the users from changing the sales office and sales group in the sales order
    so you have to write the logic in userexit
    DATA: lt_user_list   TYPE STANDARD TABLE OF tvarvc,
           lw_user_list   TYPE tvarvc,
           lr_user        TYPE RANGE OF syuname,
           lw_user        LIKE LINE OF lr_user.
    IF screen-name EQ ' VBAK-VKBUR' and   VBAK-VKGRP.
    * IF sy-tcode EQ 'VA02'.
    **Get list of users who are allowed to change SO - only they can change payment terms
         SELECT *
           FROM tvarvc
           INTO TABLE lt_user_list
          WHERE name = 'ZSD_VA02_ALLOWED'
            AND type = 'S'.
         IF sy-subrc = 0.
           LOOP AT lt_user_list INTO lw_user_list.
             lw_user-sign = lw_user_list-sign.
             lw_user-option = lw_user_list-opti.
             lw_user-low    = lw_user_list-low.
             lw_user-high   = lw_user_list-high.
             APPEND lw_user TO lr_user.
             CLEAR lw_user.
           ENDLOOP.
    **    If user is not in the users listed for change allowed
           IF sy-uname NOT IN lr_user.
             screen-input = 0.
           ELSE.
             screen-input = 1.
           ENDIF.
         ENDIF.
       ENDIF.
    ENDIF.
    go to STVARV t code here you check the NAME and give the user ids who need to change

  • How to pass sales office to BAPI_PO_CREATE1

    Hi,
    im using the 'BAPI_PO_CREATE1', im having a problem that it is showing error as 'pass the sales Office'.
    In ekko, sales office field is available. but in the structure BAPIMEPOHEADER, sales office field is not available.
    please help me how to pass the sales office to the Bapi.
    Thanks in advance,
    Regards,
    Elavarasu.

    Hi
    I think that it's an append in table EKKO as a ZZ-field (for instance, ZZVKBUR). If I am right, two possibilities:
    1. Populate with structure EXTENSIONIN. See SAP Note 582221 - FAQ: BAPIs for purchase orders, quesion 15.
    2. Try to populate it with badi 'ME_PROCESS_PO_CUST'.
    I hope this helps you
    Regards
    Eduardo

  • How to add sales office and sales group code in Badi Order_Save?

    Hi,
    i have a requirement .
    the concept is like this ,we have S>D>G lay out.
    initially the sales office and sales group were fetching  values from "G".
    But my requirement is the sales office and sales group should fetch values from "D"..when the transacion is "ZGRW"..
    This is in CRM platform...So how shud i assign values of D to sales office and sales area??
    how to code this...
    help me out
    Edited by: VARUN VADNALA on Jun 25, 2009 1:35 PM

    Hi Sangeeta,
    As per your statement, my understanding is that the Organization Attributes are not maintained in the Customization. If all the values are properly maintained then based on the Organization Data determination, the system would have picked up the data. You can first check the Organization Structure and see all the attributes are properly maintained or not and then check whether the Object Permitted in determination checkbox is checked. Then create a Transaction and see that all the Organization data are getting filled properly.
    Have a look at the following link for a complete guide to the Organization data determination customization.
    http://help.sap.com/saphelp_crm70/helpdata/en/6d/5c1738453fde16e10000009b38f8cf/frameset.htm
    If the Organization data customization is not meeting your requirements then you can have a second look at the development approach. Then we can have a look at the available Objects to get the desired functionality.
    Hope this helps.
    Thanks,
    Samantak.

  • How to authorization sales office and sales group in VA21 and VA01 t-code

    I need to authorization sales office and sales group in va21,va22,va23 and va01, va02, va03 to control users access the sales order.
    I found some articles how to resolve this problem.I have created new authorization object Z_VBAK_ VKO, and add these fields to the object: VKORG: Sales Organization, VTWEG:Distribution Channel, SPART: Division, VKBUR:Sales Office, VKGRP: Sales Group, AUART:Sales Document Type, ACTVT:Activity
    I have add the object Z_VBAK_VKO to va01, va02, va03 in SU24 translation.
    I test the authorization , but fail, va01 and va02 do not check the authorization.
    Why? what can i do? please help me .
    thanks

    Dear Wu
    I think you are using the concept of Master Roles and Derived Roles.If ur using then create a master role and derived role for the authorisation group you want. And in the derived role assign the specifics to the respective logins ID. If you want to attach the authorisation to the T-Codes Va01 or VA21 etc then you have to use Exit.
    Correct me if i am wrong.
    Regards
    Jyotsana

  • How to Default sales office and group in Organisation tab of crmd_order

    Hi Experts,
    In crmd_order transaction when user enters sold-to-party, then organisational determination takes place which brings sales area,distribution channel and division automatically under organisation tab.
    My requirement is to fetch the correspoding value of sales office and sales group for that Org unit and display them in the organisation tab.
    My logic goes like this:
    1) I have to fetch the sales office and sales group from the master data of ship to party ( i.e. bp with ship to party role).
    2) Then Give the sales area key( org unit, distribution, division) to fetch/filter and display the sales office and sales group.
    Which function modules to use to make the above 2 steps work. What code to write to make the above two steps work.
    I did not find any FM that takes bp with ship to party role and gives back the org unit data alongwith sales office and sales group.
    Then, how to link BP with role ship to party with Organisation Unit and then take the org key to read the org data.
    Which tables and FMs should I consider for this. I am thinking of using the merge method of CRM_ORGMAN_BADI.
    Thanks in advance,
    Sangeeta.

    Hi Sangeeta,
    As per your statement, my understanding is that the Organization Attributes are not maintained in the Customization. If all the values are properly maintained then based on the Organization Data determination, the system would have picked up the data. You can first check the Organization Structure and see all the attributes are properly maintained or not and then check whether the Object Permitted in determination checkbox is checked. Then create a Transaction and see that all the Organization data are getting filled properly.
    Have a look at the following link for a complete guide to the Organization data determination customization.
    http://help.sap.com/saphelp_crm70/helpdata/en/6d/5c1738453fde16e10000009b38f8cf/frameset.htm
    If the Organization data customization is not meeting your requirements then you can have a second look at the development approach. Then we can have a look at the available Objects to get the desired functionality.
    Hope this helps.
    Thanks,
    Samantak.

  • Help required: how to makes sales office field mandatory, in inquiry and qu

    I want to make the field sales office as mandatory , in Inquiry and quotation, please guide me how i can do it.

    hi
    if so then u do one thing.. enter the Tcode and then in variant name .. keep the field empty and search for Transaction variant by giving only the tcode.VA11
    if u find any transaction variants for Va11 then u can use that or else serach with VA01 and c how many Transaction Variants u r getting.. to my guess u must only be getting BUS2030..
    if that is the case u have to create new transaction variant for va11 and then proceed the process
    =====================
    GOT THE SOLUTION
    =====================
    SHD0 > enter tcode VA11 > F5 > Give the Enquiry type (IN) > give the details sales org, dist chnl, div, > Press Enter > will get the fields with options..
    Same in the case of VA21 .. giving sales org , dist chnl, div is not compulsary.. just give the document type and can proceed..
    Reward if USeful
    Thanx.. Naren..

  • How to change sales order collectively

    Hii,
    I'm looking for the way how to change some field of sales order collectively, such as VKBUR, VKGRP and any fields. I'm checking VA05, but which seemed only new material, new pricing, new plant and currency could be changed.
    Any alternative? or if my understanding is wrong, please give any comments.
    best regards, Takashi

    Hi,
    you can do it in MASS by selecting Sales order under object type drop down menu.
    or
    if the data consists of more than one table such as VBAK, VBAP etc. you can extract the data by simply creating an ABAP Query with the trasaction SQVI, however after extracting data you will have to do it in MASS. ABAP query will be more useful to join more than 2 tables and get the data.
    Br, Sats.

  • Adding/changing sales office

    Hello,
    I need to rename  current sales office and I need to know following:
    - which transaction exactly I have to use for this purpose,
    - can I change it directly on PRD server without need to go through steps DEV-QAS-PRD and does thi column have any dependence with other elemnts in SD?
    Any help is appreciated and many thanks in advance for prompt reply!
    Cheers;)
    Sam
    Edited by: samnovice on Feb 1, 2012 10:49 AM

    which transaction exactly I have to use for this purpose,
    Use Tcode OVX1.
    can I change it directly on PRD server without need to go through steps DEV-QAS-PRD and does thi column have any dependence with other elements in SD?
    Based on standard, change of name of sales office will not have any impact. Other then, if  in some enhancement or thats hardcorded for any output type program.
    And not advisable to change directly on PRD.
    Regards
    JP

Maybe you are looking for