How to change screen refresh rate in windows 7sp1 and windows 8.1 iso image using dism

sir when i install windows 7sp1 and windows 8.1 then after the completion of setup when first time windows boots up then task bar is not shown and display is not clear and when i check under monitor settings the screen refresh rate is 60 Hertz and when i
set the screen refresh rate from 60 Hertz to 75 Hertz, then everything is OK, plz tell me why this happens?
why windows 7 sp1 and windows 8.1 automatically sets the screen refresh rate to 60Hertz instead of 75Hertz.
how can i set screen refresh rate 75 Hertz permanently in iso image using DISM ?

That is not a function of DISM. Resolution and refresh rate capabilities can be determined by multiple causes. Drivers are one, another is that most modern displays will report their capabilities to Windows.
You can specify display settings with an answer file however:
<Display>
<HorizontalResolution>640</HorizontalResolution>
<VerticalResolution>480</VerticalResolution>
<ColorDepth>16</ColorDepth>
<RefreshRate>60</RefreshRate>
</Display>
http://technet.microsoft.com/en-us/library/ff716344.aspx

Similar Messages

  • How to set screen refresh rate for linux console (runlevel 3)?

    Hi,
    I have a CRT monitor, so the refresh rate is always needed to configure. I use 720x400 resolution in console, but the refresh rate is 70hz. Are there any ways to get it higher in console (with KMS or without)?
    Last edited by AleXoundOS (2009-11-04 12:27:09)

    thank you for replies
    But setting the resolution, e.g. vga=773, would not change the refresh rate, or would it?
    It would, but usually not to the maximum provided by the monitor. May be it is real to find the place, where it looks for available resolutions linked with refresh rates...
    According to the Gentoo page I can use uvesafb for setting refresh rate as well as other settings. And then I found uvesafb page in ArchWiki. But the way to set proper refresh rate is not so easy as I expected, because I need to install uvesafb and it needs additional daemon. And also I think KMS can't work here. However it's better than nothing, if I don't find any other way, I will try this one.

  • How to change two different iCloud account from mac and iPhone?

    How to change two different iCloud account from mac and iPhone?

    Pick one to use, abandon the other.

  • How Can I change my refresh rate to 75hz for on LCD using 91.47 drivers?

    HI,
    I use a 19" LCD and have always changed my refresh rate to 75hz to avoid ghosting in games like fifa 06 (60hz causes a nasty ghost on my 8ms panel).  I have been using the 81.98 drivers and could create an override to use 75.   The new driver will allow me to change the refresh rate to 75, but will not let me use it - I get the message "The custom resolution cannot be added".   I have coolbits2 installed.  Is there a registry setting that I can add to allow me to change the refresh rate?  If not, I'll just go back to the 81.98.  I am also using the DVI connection.
    Thank you,
    * This is on my Sli PC in my sig. *

    I know that on my particular LCD monitor, if I go above the recommended rates, then the screen will just go black and won't let me see anything.  Usually it displays a message telling me that it cannot display.  I think it especially does this with the DVI connection.
    You may have tried it allready, but just make sure that in your display properties you have unchecked the option to only display resolutions allowed by the monitor.
    You may also want to try and see if it will let you do it with a VGA connection instead of the DVI.
    Otherwise, you just may have to go back to the earlier driver.

  • How do i change my refresh rate

    hi all i have a new Imac i need to change my refresh rate , i have looked in system prefernces etc

    There is 3rd party software like Switch ResX that lets you set custom resolutions and refresh rates. I run my 15" rMBP at 48Hz since I edit and watch nearly everything 24fps and it helps reduce GPU strain. I can also set external displays to custom resolutions that they may not support officially, for example my LCD TV supports 48Hz in addition to 24, 50, 60Hz, etc.

  • MacBook Pro Screen Refresh Rate

    I got one of the new santa rosa 15-inch macbook pros with a glossy display about 3 weeks ago. When i play games or look at display settings, i can't change the screen refresh rate. For example, in battlefield 1942, in the display settings i get a rate of "0"for my built in display! Not "60", or "75", just "0". Also, in the display preferences tab in system preferences, there in no refresh rate to set, but all other displays i connect have a refresh rate setting. How to i change the refresh rate of my built in display?

    as far as i'm aware, LCD displays do not have a refresh rate per-se
    the reason is because refresh rate is a term applied to Cathode Ray Tube monitors (read that as your standard computer monitor, not an LCD one) and in particular the refresh rate is how many times the gun in the monitor rasters a horizontal line onto the screen in one second.
    with LCD displays, because they don't use a gun and are not based on CRT technology, they don't have a refresh rate
    i could be wrong though, but i'm sure i read somewhere about this

  • Satellite M55-s3315: Screen refresh rate is 60 Hertz?!

    I have bought Toshiba m55-s3315 analog m50-s.... with intel 910 built-in, shared dynamic 128 mb memory; screen - 14.0" WXGA widescreen display with Toshiba TruBrite . Only refresh rate i get is 60 Hertz. I have updated intel chip software and toshiba also ... I would like to know is it possible to get more than 60 Hertz. The only way is to get 85 Hertz is to add extarnal monitor. I there oportinity to get at least 75 Hertz screen refresh rate ??? It was possible with my old HP Pavilion ze 5000.
    May be someone could explain me??
    Thank in advance!!!

    Hi
    I have noticed that on some Toshiba notebooks the screen refresh rate is fixed on 60 Hz. I have two of them. On Tecra M1 is fixed and on Satellite 1900 not. I have tested it and there is no difference if the refresh rate is changed.
    The TFT technology is much better than on usual monitors where the display flickering is visible on lower refresh rate. On display you will not see any flickering. In my opinion there is no reason for panic.
    Enjoy the life!!!

  • In elements 10 how to change screen color around photograph being worked on?

    In elements 10 how to change screen color around photograph being worked on?

    If you mean just the background of the tab or image window, right click it and choose what you want. If you mean for the whole program, no can do, sorry.

  • Satellite U200 - questions about screen refresh rate

    Sattellite U200-148 WINXPHOMESP2
    Video adapter Mobile Intel (R) 945GM Express Chipset Family
    Volume of video of memory 128
    Problem Accelerated Graphics Port - it is inaccessible
    Frequency of hertz the screen 60
    Questions
    1) Accelerated Graphics Port - there is enabled if yes that that it is necessary to make that it became accessible.
    2) whether Frequency of hertz with 60 can be raised even up to 75.

    Hi
    I have noticed that on some Toshiba notebooks the screen refresh rate is fixed on 60 Hz.
    The display refresh rate is not important on the notebook screens.
    TFT matrix doesn't have such thing as refresh rate. It doesn't blink.
    TFT like all other LCD screens doesn't have refresh rate parameter, only reaction time.
    Your eyes are safe ;)
    Ps: As far as I know the AGP port is not available.

  • Screen refresh rate

    Please does anyone know the screen refresh rate of a Macbook Pro 2.4 GHx Intel Core 2 Duo (Is this is a 60 Hz monitor?). I am conducting a psychology experiment, and I really need this information, and I cannot find it in system profiler? thank you!

    just another reason why this was the best investment i have ever made. i +++++ love mac and the "family" thereof! lol
    I tried to mark as "solved" but I get an error!

  • How to change the update rate of an Analog output in a loop

    I have to generate a ramp at a decreasing frequency. I use a shift register in a "for" loop to decrease the rate of the analog output. Unfortunately, the loop or the analog output initialisation take a too long time delay..
    How can I solve this problem?
    Any help is greatly appreciated
    Thank you

    Hello;
    I'm attaching an example VI that shows how to change the output rate on the fly.
    Hope this helps.
    Filipe
    Applications Engineer
    National Instruments
    Attachments:
    aochangeonthefly.zip ‏47 KB

  • What is the iPad 2's screen refresh rate?

    I don't know what the iPad 2's screen refresh rate is, and I've looked pretty much everywhere. I am looking to develop a 3D system for the iPad 2 or 3, but I can't untill I know the screen refresh rate. Does anybody know?

    60 Hz

  • How to change screen resolution on touchpad

    how to change screen resolution on touchpad ?i was working on my tp and out of the blues  my screen looks like it is at 800*600
    or is this the screen itself that went bad?
    can someboby please tell me the procedure to use the 12 mt warranty..
    tia
    Post relates to: HP TouchPad (WiFi)

    Sorry to say reloading WebOS did not help this issue on my TP. contacted Support and was told to send it.Even sorrier to say that my TP is now lost. My tracking number reports it as delievered on Dec 5, but HP has no record of it.When I got back on Chat they  are now also telling me that my TP serial number is a EU model, even though my box clearly states HP Touchpad ,US, 1.20,32gb,Wifi.
    Not sure what that even has to do with it being lost now..if it is as they say and no warranty on it in US I just want it sent back.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • How to change the default password file's name and path when the database created?

    how to change the default password file's name and path when the database created?
    null

    Usage: orapwd file=<fname> password=<password> entries=<users>
    where
    file - name of password file (mand),
    password - password for SYS and INTERNAL (mand),
    entries - maximum number of distinct DBA and OPERs (opt),
    There are no spaces around the equal-to (=) character.

  • How to change apple id on iPhone. Wife and I have same apple ID.  Get each others iMessages. want to put her on another cloud with different id.

    How to change apple id on iPhone? Wife and I have same apple ID which causes me to get her iMessages instead of her. I also get all her pics on my phone and I don't want them.  We need to change her apple ID without causing my ID and cloud to be closed.

    Have her create a new ID.   Here:  https://appleid.apple.com/
    Have her log out of iMessage/Facetime/iCloud on her device.   Now have her use the new ID she has created.
    That should keep the 2 of you separated, except for iTunes purchases.   You can share that ID in a family up to 5 devices.

Maybe you are looking for

  • Print a report

    i have a report with many pages > 10 and i run it in the browser with htmlcss format my problem is that the first pageis good but after the title is down and the third is more down so after 6 or 7 pages the title is in the middle of the page how can

  • System.IO.FileNotFoundException: The Web application at ..not found - when getting document versions in a doc lib

    i have created a    asmx file using vs 2012 4.5 framework, and published to my d:\  drive  and mapped to a  iis  web site but when i trued to consume this from a another web appln, it throws me the below error:  System.IO.FileNotFoundException: The W

  • Really Difficult iCal Bug (iCal now unusable)

    I have an iCal problem that has made my calendar unusable. A little while ago I dragged an email onto the REMINDERS icon in my Dock (not the iCal icon, although we all know how the expanding icons can make precision difficult) to see if I could link

  • Substitution of products in MM

    Hello, I want to implement a standard Purchasign process in the food industry. My client is using SAP R/3 4.70 (Enterprise) This industry is caracterised by product sustitutions - for example, one is buying a bottle of salad-dressing of 1 Liter, but

  • Does 3GS support AirPlay mirroring?

    I have an iPhone 3GS running iOS 6.1.3 and would like to know if it is capable of AirPlay mirroring ?