How to Change Sequence Resolution After Setting Your Sequence Resolution
Hello, I am using premiere pro on a mac and I started a project. I set my sequence settings. After putting together my movie and prepared it for export, I noticed that I initially made a mistake in my sequence settings and forgot to set my resolution to 1080p.
I tried going back into my sequence settings and changing the resolution but it is grey and not accessible.
Is there a way to either change the resolution or somehow duplicate the sequence into a new one with a higher resolution?
I spent much time on this sequence and I do not want to do it all over again due to a little mistake.
Please help?!
Thanks.
Thank you for the quick response. How do you copy paste a whole sequence into a new one?
Similar Messages
-
HOW TO CHANGE HOST NAME AFTER SAP IS INSTALLED?
i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.
As far as my understanding goes it can be done. The only problem is SAP is not recommending it. Still if you want to give it a shot please go through the link to learn more and step by step guidance.
[Click Here|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
Also take a look at this SDN thread, you might find something interesting.
[click here for SDN thread|How to change the hostname was set/defined in SAP system?;
Edited by: santra.anirban on Sep 13, 2010 10:45 AM -
How to install Ciscom Connect after setting up the devise
I have set up my router E1200 v2 with the disc after the direction through live chat as I received error code. Now my router works well but I don't have Ciscom Connect software in my program. I downloaded it from the site and saved it in my folder as an application. Now, how I can install it? As it is 'set up software', when I make it run, it tries to set up but the router has already been set up so it can't complete the setting-up then no software is saved as a program nor no 'ciscom' file is created.
The software I downloaded was not the right one?
I can enter Ciscom Connect page as I know the address for directly connection but still I would like to have one as a program which allow me to go to the CC easily.
Let me know how to install CC software after setting up...
Thank you!Hello,
Glad to heard that the issue had been resolved. And thanks for your sharing.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support -
How to change screen resolution on touchpad
how to change screen resolution on touchpad ?i was working on my tp and out of the blues my screen looks like it is at 800*600
or is this the screen itself that went bad?
can someboby please tell me the procedure to use the 12 mt warranty..
tia
Post relates to: HP TouchPad (WiFi)Sorry to say reloading WebOS did not help this issue on my TP. contacted Support and was told to send it.Even sorrier to say that my TP is now lost. My tracking number reports it as delievered on Dec 5, but HP has no record of it.When I got back on Chat they are now also telling me that my TP serial number is a EU model, even though my box clearly states HP Touchpad ,US, 1.20,32gb,Wifi.
Not sure what that even has to do with it being lost now..if it is as they say and no warranty on it in US I just want it sent back.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
When I use Photoshop CS 6 to edit video, I don't know how to change video speed after I converted the clip to smart object? The clip color turns purple and it only allows me to add motion but not change the clip duration and speed anymore.
Thanks for the reply and as a work around method I used the Photoshop to do all the adjustments then export the video to iMovie to finish the final cut. I also have a problem to paint or clone on a blank video layer created in Photoshop. It tells me the time is beyond the target frame time, I don't understand the message. Can you explain to me what did I do wrong? Thanks a lot!
John Wang
801-3618742
[email protected]
http://johnwanggallery.shutterfly.com -
How to change the standard layout sets in ALV List
Hi Gurus,
How to change the standard layout sets in ALV list.
Is there any standard program ? or specific way to acheive this?
Kindly drop some clues?Every valuable clues rewarded more points........
Thanks in Advance,
DharaniHello Dharani
All required function modules can be found in function group SLVC (assuming that you are using OO-based ALV or, at least, fm REUSE_ALV_GRID_DISPLAY_LVC):
LVC_VARIANT_DEFAULT_GET (Read default display variant (description only, w/o field catalog))
LVC_VARIANT_EXISTENCE_CHECK
LVC_VARIANT_F4 (Display variant selection dialog box)
LVC_VARIANT_SELECT (Read a display variant)
For a sample report using LVC_VARIANT_DEFAULT_GET have a look at BCALV_GRID_10.
Regards,
Uwe -
"input signal out of range, change settings to 1600 x 900 -60HZ" How to make this change?
I have a HP desktop PC and I recently purchased a HP 2011X (20" flat monitor). Initially, I hooked it up to the pc and it worked and I did not have to install anything. But the other day, I ran the Microsoft's Fix-it-Center and ran the resolution problem detection even though I did not have any problem with the resolution. Within 5 seconds, a dark black screen appeared with the following message:
INPUT SIGNAL OUT OF RANGE
CHANGE SETTINGS TO
1600 X 900 - 60HZ
It displays this message and then the monitor goes to sleep. I press the buttons at the bottom of the monitor and from time to time, it displays a resolution screen that shows the monitor's resolution is not 1600 x 900 but that HP recommends that setting. However, I cannot change anything and that small screen with black background disappears in a few seconds. I cannot see anything else and I have tried the following:
- Turned the PC on and off several times and the message is still there
- Unplugged the power to the monitor and re-plugged it and no change
- Unplugges the video cable from the PC to the monitor and re-plugged it and nothing
Please help. I cannot see the PC screens at all even though the PC is on. All I see is the black background screen with white text with the above message. How do I fix this when I cannot see the Windows screen or from the monitor.
Thanks,
BobHello IE_PC_User,
Let's try to get your computer to the boot options and go into VGA mode to see if you can change the resolution then.
Start up your computer and start tapping away at the F8 key.
Once the computer presents you with the boot options choose the VGA mdoe.
It should boot up and everything look really out of place. Set the proper resolution and then reboot.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical. -
HP Officejet 8600 Pro - how to change scan resolution presets at the printer
I have an HP Officejet 8600 Pro and wish to scan to email from the printer and wish to change the default resolution setting. I would like to change the default scan resolution so I dont have to remember to change it every time I scan.
If I change it with the HP Windows Printer Assistant software it only seems to change the resolution for this time and only from the computer not at the printer.
Is it possible to change the scan resolution settings at the printer? I cant find detail in the manual or on the printer console.bvlusa,
Open the Icon labeled Officjet Pro 8600 on your desktop, and then click on Scan a Document or Photo. When the Scan application window opens you can change the Resolution from the drop down menu.
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
How to change Screen resolution
Hi - I installed enterprise linux on VMware running on windows 7. The screen resolution show 800x600 which sucks. How can i change the screen resolution? thanks
You need to install VMware Tools, which will allow the VM to have a better screen resolution and color depth, a gigabit network connection and intelligent memory management. Also set your monitor to a device that supports the higher resolution.
http://www.devside.net/blog/vmware-player-resolution
http://communities.vmware.com/thread/152837
http://communities.vmware.com/message/488011 -
How to change sequence settings without CC 7.1 update?
Well, i was hoping that Adobe will release 7.1 update on October 15th, as promised on some websites. I don't recall, maybe it was Creative COW or any other.
That's why i have created 720p PRORES proxies for 9x multi-camera live performance shoot which lasts for 2 hours for lag free, fast editing.
I have sucessfully edited it and promised my clients that on October 16th they will get the whole show in 1080p, high quality.
So, there is no update yet, and yes, i can relink files to original 1080p, but the multicam sequence is capped to 720p and i simply can't find a way to change it's size.
The old fashion copy/paste way from one sequence to another does not work, since 720p sequence is linked to multicam edits. In CS6 i could edit ".prproj" file in text editor to change any properties (including sequence properties), but right now in CC, .prproj file contains binary data only, so i can't do it that way either.
Maybe someone knows any other way to change sequence settings right now, or what is the exact day for 7.1 release?
Thank you!Hi Paolon!
You need to extract your .prproj using WinRAR to a text .prproj file, then use some text editor such as Notepad to search and replace sequence dimensions
For example find "1920" and replace it to "1280" if it looks like Īt belongs to a sequence definition.
I don't recall how it was called, maybe "VideoFrameRect" or something similar.
First create some very simple project to experiment with, and always make a backup copy in case something goes wrong -
How to change page type after the fact
In the application builder, I click on an application and choose Details in View.
I get the list of pages I have in my app.
The page type column has:
Interactive Report
Navigation Form
Dynamic HTML
DML Form
Chart
Report
How do I change this column after a page has long been created?
Specifically, I want to the change "Dynamic HTML" to something else.
Why?
Because on this particular page, tabs do not work (error: page not found).
Buttons created among a regions items do not work (same error, page not found).
I need to use tab and buttons to go from this page to other pages.
And I am suspecting the page type may have something to do with my problem.
Thanks in advance for any pointers.Thanks for your consideration!
For my current app, a clinical management system,
I'd like to have, say, 1000 items.
(For other applications I am thinking about, but have no time,
nor expertise for now, I'd need millions of items,
each corresponding to a pixel of a graphic.)
Who cares if the current computers are too slow?
How about make it a parameter that can be changed
per app or per apex installation, and default to 100?
Some forms can be broken up logically, as people have helpfully suggested,
and I did follow that advise on some pages.
But other forms cannot be. People have put a lot of thought on designing
those forms, they are government or legal standards (or at least something more important
than computer performance), and people have been trained
with those original forms.
Consider the hoops I have to jump through to get more than 100 items
on a page I am currently working on:
Generate the items (INPUT type="text" and INPUT type="checkbox") using PLSQL
lots of htp.p('<INPUT ...>').
a JavaScript function to collect all the values on the page
and make up an XML string. submits this string to an application
process, and application process parses the XML string and does insert or update.
Another JavaScript to populate the items based on the current values of a row,
using an application process to retrieve the columns of a row.
There are about 150 items on this particular page.
All these are ok, because I was aware of the restriction of 100.
And because I wanted to generate my own HTML to mimic the original
form anyway.
Then things started to go weird.
I need buttons to go back to another page. and I use tabs.
Buttons to go back from this page,
when a button is created with "Create a button in a region position",
it works fine.
When a button is created with "Create a button displayed among this region's items",
it does not work, and I get HTTP 404, https://.../apex/wwv_flow.accept, page cannot be found.
But I need a button to work like the one created with "Create a button in a region position",
but displayed like the one created with "Create a button displayed among this region's items".
This is still not too bad. I saw the difference between the two kinds of buttons.
I copied the HTML code for the button "Create a button in a region position",
and used a display only item to create a Back button where I wanted:
'<table class="t15Button" cellspacing="0" cellpadding="0" border="0"><tr><td class="t15L"><img src="/i/themes/theme_15/button-l.gif"/></td>'||
'<td class="t15C">Back</td>'||
'<td class="t15R"><img src="/i/themes/theme_15/button-r.gif"/></td></tr></table>'
Here P145_BACK holds the page number to which I want this page to go back to.
Then I noticed that the tabs did not work any more. same error, page not found.
That's is when I got a little frustrated and posted for help on the forum.
Then I begin to undo my steps, and
by lucky accident, I noticed that, if none of the checkboxes is checked,
the tabs work fine. If at least one is checked, I get this error, page not found.
My current solution is to add a function of my own in the doSubmit(B) function in file apex_3_1.js,
which unchecks all checkboxes (o.checked=false).
And now, from this page of about 150 items,
the tabs are ok, and I have a button that is similar to one
created with "Create a button displayed among this region's items", except I created myself
using HTML.
I think this trick of using a custom function in doSubmit(), that unchecks or even hides
INPUT type="text" items (o_div.style.visibility = "hidden"; o_div.style.display = "none";)
should work in general. this function is only invoked when the user clicks the tab,
or buttons among a region's items.
Somebody said regarding restrictions on drugs or sex.....
you will not make people stop, you just make it harder or more expensive.
Same here and many other things, a restriction is just making things harder.
People will try to get around it.
Now that I have a solution, and I am aware of the problem, I'll calm down and
go back to my own thing for now. -
How to change the resolution of a file?
Hi, can someone please help me. I am working with illustrator CS and I am exporting a file as a jpeg. I need to print that file so when i export it i am changing the resolution to 150dpi. When i open the file in windows picture manager edit it and save the changes the file turns black and it prints a black page. This only happens when i change the resolution to 150dpi or higher if i leave it at 72dpi and make changes i don't have problems it will save fine. I have tried many different things but no luck. Hope someone here can help me. thank you.
Sounds like an issue with your image editor. BTW if you plan on editing the image you should use a lossless format from Illustrator to the editor then save as a jpg. Each time you save the jpg more and more data gets thrown out until it unusable.
-
How to change image resolution in oracle forms.
Hi Experts,
I am working on oracle forms 10g (Windows7 OS). Can we get the image resolution of an image item in oracle forms? Can we resize the image in terms of resolution?
I have a requirement where user can upload only 1280x720 size images. Either i have to validate the image resolution and give them a message saying 'Only 1280x720 size images are allowed' or simply i have to convert the image to be upload to 1280x720 size and save in the database. If someone could give the solution for the above problem that would be very much appreciated.
Thanks,
Pramod SR1. You need to resample.
2. You can automate the process.
1.
Open one of the images.
Go to Image > Image Size
Set the units to Percent (100)
Change the resolution to 300 ppi (not cm!)
Make sure Resample is checked
2. automation
Test the above steps to make sure it works.
Record the steps as an action.
Make a droplet from the action.
Drag the folder with the images to the droplet. -
How to change a folder layout set using KM api?
Hello,
I'm developing a program using KM api that creates different folders with properties, permissions, ... I want to use a different layout set depending on the folder that i am browsing, but these folders are created dinamically, so I cant set a different layouts set for each one manually (Details > Display > ...).
Does anybody know how I could do it using KM api? I mean, that every time I create a folder using KM api I should assaing dinamically the default layout set for this folder. I searched in the api and examples and I didn't find anything.
Thanks in advance and best regards,
JCHi all,
Problem solved... I decompiled standard code and I did what SAP do when they want to change a folder layout set:
IResourceContext context = ResourceFactory.getInstance().getServiceContext("cmadmin_service");
com.sapportals.portal.security.usermanagement.IUser puser = context.getUser();
ICollection collection = (ICollection)ResourceFactory.getInstance().getResource(RID.getRID("folder_path"),context);
IRepositoryServiceFactory factory = ResourceFactory.getInstance().getServiceFactory();
ILayoutService layoutService = (ILayoutService)factory.getRepositoryService(collection, "LayoutRepositoryService");
ILayoutContext userContext = layoutService.getContextForUser(puser, "");
ContextProperties commonProperties = new ContextProperties(layoutService, collection, userContext.getAnonymousContext(), layoutService.getProfiles(), new HashMap());
commonProperties.initFromPersistence();
commonProperties.setSelectedProfileID("LayoutSetProfile");
commonProperties.setSelectedLayoutsetID("ID_of_my_layout_set");
ArrayList errormsg = new ArrayList();
commonProperties.save(null, errormsg, false);
Thanks and regards,
jc! -
Does anyone know how to change the resolution of a bitmap in LabVIEW?
I need to do a LabVIEW program that changes the resolution of a bitmap to different values (i.e. 640x480, 320x240, etc.). If there is a way to perform this task, please let me know.
Discussed here
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Maybe you are looking for
-
How to send an email with an attachment to the customers email address.
Hi friends, How to send an email with an attachment to the customers email address. the attachment will be in doc format. Having an Header the data which i am sending must be in a TABLE format with 5 columns. and each column must have a column headin
-
I am trying to use nm-applet under Awesome on my netbook, before I was just using cnetworkmanager but after the last update to NetworkManager cnetworkmanager is now broken. Wired connections work fine but when I try to connect to a wireless AP I see
-
Can you append a link to a form with a query string to popular a form field?
I'm trying to do this with Form Central but having no luck getting an answer. Is Acrobat Pro the answer? Thanks for your help Wayne
-
It's not letting me play my project & there is no sound to the events
So I was working on a little video when all of a sudden the program starts messing up. It won't play the sound when I click on the events. Meanwhile the project is shown but it won't play it. I can't even skim the project and it won't show up in the
-
UiXML and query string parameters
Is there a simple way to access a query string parameter within the destination page? Example: - in my source page I have something like: <link text="My page destination" destination="page?param1=value1" /> What I want is to be able to acces directly