How to change SID during sustem copy

How do we change SID of the sandbox system on which we are going to copy production data, using homogeneous system copy pr.

It is explained in the homogeneous system copy guide. It is not difficult at all but you need to uninstall sandbox system first.

Similar Messages

How can changes happened during the cube activation be nullified.

Hi all,
I was trying to activate some business content infocube in the dev.server. I selectecd data flow before. In the process I collected all infoobjects associated with the cube and all the info-objects which are associated with that info-objects. When I installed the cube some of the customised business content info-objects associated with the cube got over written by the delivered version. We dont have the documentation which provides the information on which are all the infoobjects that were modified and which were not.
Can any one give some idea how the changes happened during the cube activation can be nullified.Or how can I find out which were the info objects which were customised before business content was again activated and which are those changes.
Regards,
Anand

Hi Anand,
As long as you did not activate the Cube (= not activate BC, but cube itself)
you can compare the changed cube with the active cube (Change cube screen, use button Version Comparison)
Udo

How to change the SID during system copy

This blog /people/johannes.heinrich/blog/2006/07/07/new-features-in-db2-udb-v9--part-3 (i.e. the "new feature of V9" in this group) only
talk about the system copy without changing the SID.
In reality, we often want to change the SID during the system copy. Can we modify the script mentioned in above blog
to make SID change possible?
Thanks!

Hi Christy,
if you´re using export/import which is prefered you can change the sid during the parameter setting for export and import. You´ll be asked by the old sid and the new sid. For the tablespace names it is not so important because db2 is using tablespace id not the name for the internal administration.
Regards
Olaf

How to Change SID at SAP level

Hi Teachies
I had backup and restored the development system by brtools,
I want to change the SID at SAP level , i have to note to change SID at Databse level .
What are the changes we need to do at SAP level.
ENV : Solaries, oracle 10g , ECC
Thank You
Haroon

A SID can´t be "changed", you will need to do a system copy according to
http://service.sap.com/systemcopy
Basically - install the system with a different SID and import the database backup.
It´s not possible to change a SID after installation.
Markus

How to change SID on a SAP System with Maxdb ?

Hello,
I've tryed to migrate /clone a productive system from physical to virtual for testing, and it went OK.
Now, i've done the same to another physical machine and SAP 4.6C r3 goes up,as well as the database MaxDB 7.5 on the new machine.
but now i have two problems:
First, the license key: i have to request a new one. i believe that i can do it using https://websmp110.sap-ag.de/licensekey
Second: the SID is the same, as i have clone the system from one side to another. Same OS, same kernel, etc etc etc.
In order to achieve the possibility to transform the new cloned system in a DEV system for my SAP landscape, i must rename the <sid> of my SAP.
I've changed already the SAPSYSTEMNAME = PRD to SAPSYSTEMNAME = DEV, created a new user like "devadm" renamed the directories where i could find "prd" to "dev" and even in the /home/<sid>adm files i've changed everything from PRD to DEV.
However, this have not worked for me. As that did not worked out, made the "cloning" again. And now i' again with the problem of entering the new license key ( i believe i can request it via that webpage mention above) and changing the <sid> of the system.
Is there any sap not where i can see how to change the <sid> / SAPSYSTEMNAME ?
Thank you
my system is a RHEL5 with MaxDB 7.5 64 bits
Filipe

Hi Filipe,
afaik the SID of a SAP instance cannot be changed later on.
But this is not a db-topic - so you're basically asking the wrong people here in the forum.
Perhabs is more suited for this question.
Concerning the licensekey : yes, you will need a new one if you change the hardware or db platform.
KR Lars

How to change resolution during OSX Installer?

I'm trying to upgrade from 10.4 to 10.5 and when I boot from the DVD the resolution looks like 800X600. Why? My 10.4 installation is using 1280X1024.
I can't do anything with the installer because the application isn't smart enough to scale itself. I can't view or navigate to any of the buttons because they're off the screen.
Does anyone know how to change the resolution via terminal or some other method or know how to navigate the installer via keyboard?
Thanks

baltwo wrote:
He did! *G4 connected to a 17" LCD monitor*
Actually, that doesn't tell us much since there are quite a few different G4 Macs. It might be important to know which one, but assuming this is a "Pro" type tower, the problem may be that it is filled with some video card other than what Apple supplied as OEM parts & as a result there is not complete driver support for the card on the DVD's version of OS X.
As an aside, this demonstrates why it is so important for Discussions users to fill in the "Computer Model" & related system info in their settings page with enough info for others to know exactly what Mac is involved. Apple doesn't make this easy with its confusing & inelegant model naming conventions -- it is more than a little ridiculous that some models require a footnote explaining that the season reference in their name is for northern hemisphere seasons! Nevertheless, with so many Mac models in existence, this is often essential information for getting timely, accurate help.

How to change language during a browsing session

Hi everybody,
We need an implementation where a user can log in with a guestuser (which is shared with different real persons).
So we have user "Guest1" being used by x number of persons.
During their browsing session there persons need to be able to switch the language of the portal between English, French and Dutch WITHOUT changing the language attribute of the portal user "Guest1" in the UME.
Does anybody know how we can achieve this?
I already thought about changing the browser language using javascript but I cant find a way to do this...
(tried navigator.userLanguage = "EN" but this gives me nothing)
Thanks in advance
Kind Regards
Wouter Delellio
Edited by: Wouter Delellio on Nov 12, 2008 4:20 PM

Hi,
Take a look at this
Setting/Getting Available Languages in the portal using code
Regards
DV

HOW TO CHANGE SID

Hi everyone,
I have configured oracle 10g and I need to change my SID to use a new server. Is there any way without doing everything again (install - migrate data)??
Thanks.
Edited by: user10748505 on 14-ago-2009 14:19

Hi, if you change the Oracle XE SID see .
Roberto

Modifiable Request Status after changing SID

Hi All,
I need to change DEV Systemu2019 SID but there is some modifiable change requests (There are many records in TLock Table). DEV System is the Transport Controller.
Should all change requests be released before changing SID or System Copy process doesnu2019t related to this issue.
Is there any possibility for change request loss during this process?
Any Idea will be greatly appreciated.
Thanks in advance,
Sanaz.

Thank you for the reply.
I have done a test scenario as follows:
- SAP Fresh Installation
- Restore DEV DB
- System Copy
Now there is no record in TLOCK table.
Does it mean that I had to release all modifiable requests before this scenario?
Any idea regarding this issue will be greatly appreciated,
Sanaz.

Changing SID Windows 7

Hi All,
Can anyone help with this - sorry in advanvce as I am not sure where to post the question!
I need to change the SID on some Windows 7 PC's I was tols about a program called NEWSID but this doesn't work in Windows 7.
Is there any other utility that will do this with ease?
Thanks in advance,
Chris.

Take a look at the following address
http://www.brajkovic.info/windows-server-2008/windows-server-2008-r2/how-to-change-sid-on-windows-7-and-windows-server-2008-r2-using-sysprep/
I also quote a sentence from a Mark Russinovich's post in his blog (http://blogs.technet.com/b/markrussinovich/archive/2009/11/03/3291024.aspx) that says
that "...Sysprep doesn’t support changing the SIDs of computers that have applications installed.": so, pay attention to what you do!
Bye.
Luigi Bruno - Microsoft Community Contributor 2011 Award

How to change IM text box from right side to botto...

During a video call with most of my contacts, the IM text box is below the video box and at the bottom of the screen. However, when my son calls (on new Samsung S5) the IM text box is to the right of the video box and on the right side of my screen.
I prefer to have it at the bottom and would like to know how to change it.

I have seen both layouts posted here in screen shots. I think that this may be one of those things that changes magically according to window width. Try dragging the window to a wider or narrower aspect ratio.
This kind of thing should be an option, with an "auto" setting to preserve the current width-sensitive behavior for those who like it.
Sean Ellis - uses Skype chat for serious work
Click here to read my blog post on Skype 7 and basic principles of GUI design

I downloaded Mac OS X Lion and when I go to install, it says file cannot be verified, may have been corrupted during download. How do I determine if it is corrupt and how do I get a clean copy of Lion, since I have already paid for it?

I downloaded Mac OS X Lion and when I go to install, it says file cannot be verified, may have been corrupted during download. How do I determine if it is corrupt and how do I get a clean copy of Lion, since I have already paid for it?

Download again, move the existing file out of the applications folder first.

How to change exchange rate during billing (VF02)

Respected Members,
i already created the Billing documents from sales order and it took the exchange rate wat i mentioned in the sales document.
but still it is not release to accounting .
So i want to change the exchange rate in change of billing document.
The pop up box for that field is coming in the display mode and it is not coming in the change mode.
How to do it.
Please tell me .
Thanks a lot.

Thanks for your replies.
But i have one querry that is when you go to billing document header there you will see exchange-rate accntg flied and above that there will be one checkbox set exchng rt and by going F1 on it is mentioned that you can give the exchange rate during billing and it can redertmine the value at billing level and also the exchange rate acctng field gives one pop up box same as it gives in sales order ,but here that box is in grey mode and in sales order it is in grey mode and how to bring this box in change mode during billing.
Please clarify my doubt.
THanks

How to change the path of sysprep files that were copied to reference computer when i capture the image from reference.

Dears ,,
how to change the path that sysprep were copied to reference computer when i capture the image from reference.
Should i modify some codes in LTIAPPLY.wsf? how to modify it?
Thanks.

Sysprep and capture has *Three* steps.
1. Run sysprep on the local machine (easy).
2. Copy WinPE down to the local machine so we can reboot into winpe for capture.
3. Capture the drive in an *offline* state from within WinPE.
What is most likely happening is that you are having problems with step #2. 100MB is *WAY* too small to copy down WinPE. By default MDT will make this System partition much bigger, 499MB. IF you install Windows 7 from the default media. IT will only create
a 100MB partition.
By default MDT 2012 Update 1 and greater *should* recover to a fallback drive with the OS on it, however if you are running older versions that might not happen correctly.
If you are still having problems, copy your BDD.log file to a public share like OneDrive and copy the link here.
Keith Garner - keithga.wordpress.com

How to change the line item storage location during the sales order creatio

How to change the line item storage location during the sales order creatio

Hi Kumar,
I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
Regards,
Rachel

How to change SID during sustem copy

Similar Messages

Maybe you are looking for