HOW TO CHANGE SID

Hi everyone,
I have configured oracle 10g and I need to change my SID to use a new server. Is there any way without doing everything again (install - migrate data)??
Thanks.
Edited by: user10748505 on 14-ago-2009 14:19

Hi, if you change the Oracle XE SID see .
Roberto

Similar Messages

How to change SID on a SAP System with Maxdb ?

Hello,
I've tryed to migrate /clone a productive system from physical to virtual for testing, and it went OK.
Now, i've done the same to another physical machine and SAP 4.6C r3 goes up,as well as the database MaxDB 7.5 on the new machine.
but now i have two problems:
First, the license key: i have to request a new one. i believe that i can do it using https://websmp110.sap-ag.de/licensekey
Second: the SID is the same, as i have clone the system from one side to another. Same OS, same kernel, etc etc etc.
In order to achieve the possibility to transform the new cloned system in a DEV system for my SAP landscape, i must rename the <sid> of my SAP.
I've changed already the SAPSYSTEMNAME = PRD to SAPSYSTEMNAME = DEV, created a new user like "devadm" renamed the directories where i could find "prd" to "dev" and even in the /home/<sid>adm files i've changed everything from PRD to DEV.
However, this have not worked for me. As that did not worked out, made the "cloning" again. And now i' again with the problem of entering the new license key ( i believe i can request it via that webpage mention above) and changing the <sid> of the system.
Is there any sap not where i can see how to change the <sid> / SAPSYSTEMNAME ?
Thank you
my system is a RHEL5 with MaxDB 7.5 64 bits
Filipe

Hi Filipe,
afaik the SID of a SAP instance cannot be changed later on.
But this is not a db-topic - so you're basically asking the wrong people here in the forum.
Perhabs is more suited for this question.
Concerning the licensekey : yes, you will need a new one if you change the hardware or db platform.
KR Lars

How to change SID during sustem copy

How do we change SID of the sandbox system on which we are going to copy production data, using homogeneous system copy pr.

It is explained in the homogeneous system copy guide. It is not difficult at all but you need to uninstall sandbox system first.

How to Change SID at SAP level

Hi Teachies
I had backup and restored the development system by brtools,
I want to change the SID at SAP level , i have to note to change SID at Databse level .
What are the changes we need to do at SAP level.
ENV : Solaries, oracle 10g , ECC
Thank You
Haroon

A SID can´t be "changed", you will need to do a system copy according to
http://service.sap.com/systemcopy
Basically - install the system with a different SID and import the database backup.
It´s not possible to change a SID after installation.
Markus

Changing SID Windows 7

Hi All,
Can anyone help with this - sorry in advanvce as I am not sure where to post the question!
I need to change the SID on some Windows 7 PC's I was tols about a program called NEWSID but this doesn't work in Windows 7.
Is there any other utility that will do this with ease?
Thanks in advance,
Chris.

Take a look at the following address
http://www.brajkovic.info/windows-server-2008/windows-server-2008-r2/how-to-change-sid-on-windows-7-and-windows-server-2008-r2-using-sysprep/
I also quote a sentence from a Mark Russinovich's post in his blog (http://blogs.technet.com/b/markrussinovich/archive/2009/11/03/3291024.aspx) that says
that "...Sysprep doesn’t support changing the SIDs of computers that have applications installed.": so, pay attention to what you do!
Bye.
Luigi Bruno - Microsoft Community Contributor 2011 Award

How to change IM text box from right side to botto...

During a video call with most of my contacts, the IM text box is below the video box and at the bottom of the screen. However, when my son calls (on new Samsung S5) the IM text box is to the right of the video box and on the right side of my screen.
I prefer to have it at the bottom and would like to know how to change it.

I have seen both layouts posted here in screen shots. I think that this may be one of those things that changes magically according to window width. Try dragging the window to a wider or narrower aspect ratio.
This kind of thing should be an option, with an "auto" setting to preserve the current width-sensitive behavior for those who like it.
Sean Ellis - uses Skype chat for serious work
Click here to read my blog post on Skype 7 and basic principles of GUI design

My iphone 4 back side names and logo light how to change panel

my iphone 4 back side names and logo light how to change panel

The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
This is designed to be done right away with a new iPhone.
If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

How to Change the Default Font in Firefox 4 ?

How to Change the Default Font in Firefox 4 , for this >>
http://store2.up-00.com/Mar11/AJG18655.png << ?

Go to properties first: and set before typing anything in as shown here:
http://screencast.com/t/ZTgzOTM3Y
Then right click bring up this menu while inside active field and click on item with arrrow:
http://screencast.com/t/ZTRjMWRkMzk
Now what ever you typed should reflect the new Font setting.
we may be as you say. But then again other people act like whats on the other side.
We do our best. And if we fall short, well we gave it our best shot.
Okay. In the interests of being completely clear:
I have already tried this. Several times. This procedure will change the default for any of the fields that I place by hand. It does not change the default for any of the fields placed by the Wizard. I was unable to find a solution to the problem in any of the manuals, books, or on-line forums, which is why I posted here as a last resort. This leads to two conclusions:
A. Your advice is incorrect
B. There is a problem with my installation of Acrobat
I will assume that A is not the correct conclusion. I will therefore try a re-install of my software to see if this clears up the problem. There have been other issues with other Adobe software on my machine that a re-installed has fixed nicely. Luckily, I don't have to do this at all often.

How to change the default left alignment setting in Word 2010 professional (personal use)

Hi, I use Word 2010 Professional for my personal use at home, and somehow the default setting for the left alignment in a new Word document has been changed to a hanging indent at .25. So every time I open a new Word document, the left margin
has an indent setting. I have to change it to 0.0 every time, which is annoying.
I've tried to go into the "Options" section, under "Custom Settings" to de-select an auto left margin indentation, but I can't seem to find an option to do that. Can anyone please tell me how to change this setting in the master Word 2010 template,
so that every time I open a new doc, the left side is aligned at the 1" margin with no hanging indent?
Thank you.

Page Layout-Page Setup-Margins-Custom Margins...-change your setting-Set As DefaultStay Hungry, Stay Foolish

How to change recon.account directly in Table with out changing customizing

Hi Gurus,
I want to change Customer reconciliation account but this is not possible any more due to display option for reconciliation account in customizing.
I know I can change customizing and then change the reconciliation account, but there is a better way doing this.
We can change this directly in the table without changing customizing, but I don't know how to do this. Does any one know how to change directly in the table?
Many thanks in advance

Hi there,
The steps that you should take include:
1. go to SE16
2. put knb1
3. on the field selection input the customer you want to edit
4. Execute
5. type to the transaction field /h and press Enter
6. double click to the customer line item you want to change the recon
7. this will navigate you to the debug environment
8. on the debug environment press find/search button -or- CTRL+F to find a keyword code
9. you should see if code = 'SHOW'.
10. now please double click on the word "code" to set the Breakpoint
11. Press F7
12. you will see the program routine will stop at if code = 'SHOW'.
13. Double click on the word 'code'
14. 'code' will appear on the righ hand side with value = 'SHOW'
15. change the value of 'SHOW' to 'EDIT' by double clicking the Edit icon (pencil) and replacing the value of SHOW to EDIT
16. press Enter
17. press F8
18. you can now change the recon field
19. Press SAVE button
20. Double click 2x (or more) on the STOP sign, until your breakpoint is gone
21. press F8 and you should see the message of "Database Record successfully created"
Good luck!
Regards,
Fausto
Edited by: Fausto Jahja on Jul 21, 2009 5:26 PM
Edited by: Fausto Jahja on Jul 21, 2009 5:50 PM

Can't figure out how to change the bottom margins

This is my 3rd day with a mac and I can't figure out how to change the margins in Pages '09 so that it doesn't include a .5 margin on the bottom.
I'm using a HP OfficeJet J6450. In the page setup, I changed the "untitled" user defined margins to .1 for top and sides and 0 for the bottom and it still includes a .5 margin on the bottom. Changing the untitled seems to help side margins.
I've used the inspector to see if there is a setting there that defines the bottom margin as .5 and that doesn't seem to do it.
If I print borderless, the text boxes that I have a .3 border around don't print on the edges even though they show up on my workspace. It also throws off the top and bottom.
This is a big assumption, but I assumed that if the workspace and rules show white space and now grayed out, it would print that way. It's not.
Any ideas? Thanks! Ana
P.S. I've downloaded & installed updates for everything - OS, iWorks, Printer

Peggy,
Maybe this is true of Macs? On my windows systems - I can specify more options on both my printers and can print beyond .5 inches at the bottom. One specific option on my J6450 that I can select is "minimize borders" and it will print about .1 or .2 from the edge. On my mac, I do not have that feature to select. If I print borderless, even though my layout shows it should not go off the paper, once printed it does.
Thanks.

How to change the language in smartform?

hi
how to change the language in smartform?

Hi,
U can't change the language in the smartform, the main language of the smartform is the language used to create it (so the language used for SAP log on.
But u can translate it (by trx SE63) and if u need to print in a new language u have to indicate it when the smartform is called.
U can transfer the language to be used for the print in the parameter CONTROL_PARAMETERS, like structure SSFCTRLOP, here u can indicate the language in the field LANGU.
see this..
Use transaction SE63, after activate your smartform, to translate.
In the First Page of your Smart Forms click on Global Settings under that click Form Attributes
now in the Right side screen Go to Subscreen Language Attributes.
select the Radiobutton Translate To all Languages
from the Translate subscreen out of three radio buttons.
rewaards if useful
regards,
nazeer

How to change the Timestamp In a program

Hi,
We faced a problem today, Some of the critical jobs from a source system are going to short Dump. Unfortunately we couldn't find any lockwaits, deadlocks and any delay in SM37. After analyzing, we came to know that, SAP trace indicates failure occured during program /GLB/RGTCSR_RC_INV execution :
B *** ERROR => DISTRIBUTED_TA_FAILED:
The timestamp for the execution of the program has been set as "20.070.801.000.000", that does mean it will try to retrieve all values after the date 01.08.2007 and the time 00:00:00. Now checking on the code we can see there is a logic written which retrieves the values from the table /GLB/RGTT_CS_RC, checking on the Goods Movement status (wbsta) , timestamp and document number (VBELN_SO) if any. For this case VBELN_SO is blank and vbsta is equal to space (Not Relevant). This retrieval helped to logic to retrieve 706706 document and items from the table. This amount of data is huge and we would like to request BW team to run the program with a smaller timestamp to avoid any inconsistencies and also to avoid the dumps which can occur when we try to play with this huge entries.
Checking on the code, two similar selects have been written on the same table /GLB/RGTT_CS_RC, firstly to select all the document numbers relevant to the timestamp and wbsta value and secondly to check "Get records that may have already been used", depending on the document number and item numbers. But as we are doing a select * it will automatically select VBELN_SO as well as POSNR_SO. Hence, the second select from the same table is irrelevant and it will only effect the performance of the system, in the worst case it will terminate the program with this huge amount of entries. Hence, this logic has to be combined to one single select for which the first select statement is enough. Playing with a huge amount of data 706706, and retrieving from the same table twice can surely result in a short dump. Also there are couple of loops has been done on the same table which reduces the performance too.
Possible solution looks like we need to reduce the time stamp and run it,
can some one tell me how to change the time stamp in a program???

First check the connection with the source system. If its ok then replicate the datasource and activate. Then try with running job.
Time stamp error usually happens when source system in BI and r/3 side differs.

For the life of me, I can't find out what size a photo is in terms of inches or how to change the size of the photo[s] so I can print them. I think I read somewhere to click edit, then click adjust. Nothing there about sizing.

For the life of me, I can't find out what size a photo is in terms of inches or how to change the size of the photo[s] so I can print them. I think I read somewhere to click edit, then click adjust. I don't see anything about re-sizing when I click the adjust tab: only saturation and tint levels. Thank you.

With respect to digital images, there really is no size in inches. The size is given as number of pixels horizontally and vertically. In iPhoto '09 you click the little "i" inthe lower right side of the window and it will display information related to the selected photo, including the pixel dimensions. I do not have iPhoto '11 installed so I don't know if it is the same there.
In some applications, such as preview, it has something additional called Dots per Inch (DPI) which you would think would allow you to convert the pixel dimensions to inches. It is not a real thing, though. The DPI is determined by how large or small you have chosen to print your photo and the capabilities of your printer.
There is also something called Aspect Ratio, which is usually expressed in inches x inches such as 6x9 but that doesn't mean the size on the screen or when printed is 6x9. It is the ratio of the pixel dimensions. When cropping your photos, you will have several standard aspect ratios to choose from plus any custom ones you create.
In iPhoto '09, after you choose Print, in the Print Setting window are the settings for the size you want the photo printed. You want to shoose a setting with the same aspect ratio of your photo. Otherwise, iPhoto will resize and/or crop your photo to fit the size you have chosen.

How to change the color of SAP screen?

Hi Frens,
I know it has nothing to do with SD Community, but still I am asking. Can anyone tell me "How to change the color of SAP screen?" It is needed especially when you are working on System Landscape including PRD, Qua & Dev. There are chances that you end up making a test case in PRD instead of Dev or Qua. To avoid that, different color of SAP screen may be very useful and safe.
Regards
Vikas Chhabra
SD/CIN Consultant

We had a clone of SAP for testing
Only GUIXT solution was available for users to distinguish between real Prod & Clone as SID was same
Created 2 scripts n C:\guixt\scripts
saplsmtr_navigation.e0100.txt
Esession.txt
BOTH having identical code
if V[_ashost=10.3.3.18]
TitlePrefix "CLONE18"
TitleSuffix "(CLONE8)"
endif
if V[_ashost=10.3.3.25]
TitlePrefix "PROD25"
TitleSuffix "(PROD25)"
endif
After much research - this was only solution.
GUIXT will be around; like SAPSCRIPT & SMARTFORMS
despite the enticement of Adobe Forms!
After some time you may set GUIXT profile start window HIDDEN
This you do by clicking profile button of GUIXT menu
If you want to see GUIXT Window again
CMD.exe Dos prompt
cd C:\Program Files\SAP\FrontEnd\SAPgui
guixt visible
Regards
Jayanta Narayan Choudhuri
Kolkata
URL: http://ojnc.byethost11.com

HOW TO CHANGE SID

Similar Messages

Maybe you are looking for