How to change size for pop-up history window

Hello!
I work with PoSH and like use shortcut F7 for access to history powershell commands. But it is very small for my purposes.
Are there way to change size (increase) this window?
Truly, Valery Tyurin

Hi Varlery,
I also haven't found a good methad, the explaination below is for your reference:
The command-line buffer retains the last 50 commands by default. You can increase or decrease that setting by editing the properties of the console window itself. Click on the window’s control box and select Properties. Change the size of the “Command History
buffer size” on the Options tab.
This command history is actually separate from Windows PowerShell itself. It’s maintained by the console-hosting application. Windows PowerShell isn’t even aware this exists.
Refer to:
Windows PowerShell: Those Who Forget History
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

How can I permanently enlarge the default size for pop-ups?

I use several sites that employ pop-ups. The default size is too small, so I have to manually enlarge each pop-up. How can I set the default size for pop-ups to a larger size. I don't want them maximized, just larger than the default.

A pop-up should fit normally unless you are zooming images or text or increasing elements otherwise.
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have increased the minimum font size then try the default setting "none" as a (too) high value can cause issues.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
*https://support.mozilla.org/kb/Changing+fonts+and+colors
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with overlapping text.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

How to change size of the fonts in report

Hello:
How to change size of the fonts in report for when I print it?
Thank's

Hi..,
You cannot do that with REPORTS.., With scripts or smartforms u can do that !!
plz do remember to close the thread, when your problem is solved !!
reward if it helps u..
sai ramesh

How to change workflow for expired qualification in HR Module

Hi,
My question how to change workflow for expired qualification in HR Module.We need to when date is expired tcode OOQA that system will check and that time workflow should be triggred.
I have serached sap help but i am not understand please below mention URL for SAP help
Link: [http://help.sap.com/saphelp_47x200/helpdata/en/ee/f4c9cafbab11d29ea40000e8215202/frameset.htm]
Please explain step by step how to trigrred workflow for expired qualification?
Please this problem is high and try to solve it.
Thx!
Sachin

Hi,
Why do you want to trigger a wflow and what do you want to do with this trigger. Can you give more details of your exact requirements.
But, if you are looking for how to trigger, you can write a small ABAP pgm and schedule it as a job every night. THis job basically reads the table P1000-ENDDA for expiry date and if it reached today, then you can either trigger the wflow with SAP_WAPI_START_WORKFLOW or use SAP_WAPI_CREATE_EVENT to raise your custom event(for Business Obj. BUS7018, i think this is your BO and there are no std events right now, so you will ahve to add your custom event by extending BUS7018 to ZBUS7018).
Hope I am clear and this helps and if you need more details, reply.
venu

How to change tablespace for a table in 10g?

Does anyone know how to change tablespace for a table (like changing tablespace for an index [alter index ... rebuild tablespace ... ])? Many thanks in advance.

alter table tablename move tablespace newtsname;
You need to rebuild the indexes after the move.

How to change password for itunes

HELP PLEASE!
DOES ANYBODY KNOW HOW TO CHANGE PASSWORD FOR ITUNES?

Follow the instructions here.
Apple ID: Changing your password

How to change password for BtOpenZone?

Hi,
Does anyone know how to change password for BtOpenZone? I have tried the following link and it is not working with me....
http://www.btinternet.com/new/content/mybti
Last time I have to ring BT to change the password, but I want to do via some control panel.
Thanks
Kam
Solved!
Go to Solution.

If you're a BT Total Broadband customer and you want to change the password, you can go to btyahoo.com, log in there and change your password. The primary email account and the FON/OZ logins are linked. if you change your email password, your FON/OZ password will also change.
if you're an Openzone only customer, you can log into your control panel on the main page and change your password there.

How to change password for sidadm user on HP-UX

Hello
How to change password for <sidadm> user on HP-UX

Hello Jan,
       1.      Log on to the operating system with the <sid>adm user.
       2.      Open a shell.
       3.      Enter the command passwd.
       4.      Enter the old and new passwords
Rohit

How to change password for apple user id

how to change password for apple user id

If you can't remember your current password then you should be able to get it reset via this page : http://iforgot.apple.com
If you know your current password then on your phone you can try tapping on your id in Settings > Store and you might be able to change it on your account's screen, or on your computer's iTunes you can log into your account via the Store > View Account menu option and change it on there

How to change password for parental controls

how to change password for parental control on macbook pro

If you can't remember your current password then you should be able to get it reset via this page : http://iforgot.apple.com
If you know your current password then on your phone you can try tapping on your id in Settings > Store and you might be able to change it on your account's screen, or on your computer's iTunes you can log into your account via the Store > View Account menu option and change it on there

How to change password for XELSYSADM user in OIM?

Hello Gurus and Experts!
How to change password for XELSYSADM user in OIM?
Your help is appreciated.

Follow the undermentioned steps to change the password:
1) Change the password from oim Design Client as usual.
2) Open xlconfig.xml present in <XL_HOME>\xellerate\config folder.
3) This step is optional and should only be used if you have a <XLPassword encrypted> tag in the <Scheduler> section. In the scheduler section, change the encrypted="true" to encrypted="false" and replace existing encrypted password with new clear text password, as shown below:
<Scheduler>
<XLUserName>xelsysadm</XLUserName>
<XLPassword encrypted="false">NEW_PASSWORD</XLPassword>
</Scheduler>
4) Restart server.
Now login with the new password.

HT4946 how to change the back up location on windows 7,c drive is almost full

how to change the back up location on windows 7,c drive is almost full

This is not a feature of iTunes.
See this thread for way to "trick" iTunes into backing up to a different location:
https://discussions.apple.com/message/20590667#20590667

How to change size memory for an application under Classic ?

When I ask informations on my OS 9 application under OS X.4.4, I can no more change size memory ! I can no more use my application with Classic... ???

ROYCH: This is partly guesswork, but I think it may explain why your problem occurs.
When OS X is controlling your computer (as it always does on a Mini), the file Type and Creator attributes that OS 9 uses to identify different kinds of files are not used. OS X ignores them in files that have them. Files that are only used by OS X don't have them at all. When you create a new application in Classic mode under OS X, those attributes may not be assigned to it, so the new application may not have any.
But if you copy the new application to a computer running OS 9, and those attributes are missing, the OS 9 computer will have no idea what sort of file it is. OS 9 won't even know it's an application. To prevent that, I'm guessing that OS X somehow builds clues into the file that enable OS 9 to identify it as an application, and to give it the Type attribute APPL. I believe any file in OS 9 that has that Type attribute will display the Memory menu item in its Get Info window — not only in OS 9, but in OS X. So after you copy your compiled application onto a computer running OS 9 and then back onto your Mini, it has the APPL attribute, and the Memory item is available in its Get Info box.
I have one application, File Buddy, that can (among many other abilities) display and edit the OS 9 Type and Creator attributes of any file while running in OS X. It can be used to assign specific Type and Creator attributes to a file that has none. You could use it to assign the appropriate Type and Creator attributes to your compiled applications while you are running OS X. After you do so, maybe they will display the Memory menu item in their OS X Get Info boxes.
If this works, File Buddy can apply the same changes in Type and Creator to a whole folder full of files at once. That would be an easy way for you to accomplish the same thing for several compiled applications instantly, without having to copy them to a computer running OS 9.
I don't create applications, so I can't test this procedure to see whether it works. I will be interested to hear what happens if you experiment with File Buddy.
But after saying all this, I really have no idea whether the message you're seeing about insufficient memory is meaningful or spurious. You may go through the whole rigmarole of changing the memory allocation for your compiled applications, only to find that doing so still doesn't enable you to open them. I'll be interested to hear whether that's true, too. Good luck.

How to change setting for 'last 5 password change prompt'

hi friends
in sap, when a user changes a password sometimes he/she gets a message "Please select a password that is different from last 5".
now i am in need to change this default value of "5" to "2" but i dont know what is the parameter name for changing this setting.
i would appreciate if anybody can tell me how to change this setting.
many thanks
regards

Hi nathan drake
The parameter for password history is login/password_history_size = 5
you can change to 2.
Regards,
Firoz.

How to change size of text bounding box in FW CS5?

I can't find anywhere how to make the text bounding box the same size as the text within it. Something got switched in my FW so that now every new text box is about 3x or more higher than the text typed inside. How to change this?
https://forums.adobe.com/servlet/JiveServlet/downloadImage/645181/Screen+Shot+2014-06-07+a t+2.44.37+PM.png

Moving the text box is the only thing a user can do with it. The size can't be changed. You can create a custom page with the same background and add any sized text area you'd like. This tutorial describes how: 19 - Creating a Custom Page, with the Theme's Background for an iPhoto Book.
These screenshots are rough examples of adding custom text to a page:
OT

How to change size for pop-up history window

Similar Messages

Maybe you are looking for