How to change soundblaster PCI64 IRQ for DOS - win98

Running Windows98se, recently added wireless Zonet adapter for internet capabilities. MSDOS games (DOS/4GW) requires sound card IRQ 7 or lower. My IRQ's are as below. Note: I have no manual for the creative Labs Soundblaster PCI 64 card(IRQ 0) or, Ensoniq Audio legacy Device. Tried device manager and sysedit changes without success. DOS games video is OK but no sound, nor will the in-game sound card configuraton work. How do I change its IRQ to 7 or below? I have no printer on the computer.
0 System timer
Standard 0/02-Key or Microsoft Natural Keyboard
2 Programmable interrupt controller
3 Telepath 56K Voice Faxmodem PNP
4 Communications Port (COM)
5 802.g/b Wireless LAN Client Adapter
5 IRQ Holder for PCI Steering
6 Standard Floppy Disk Controller
7 Printer Port (LPT)
8 System CMOS/real time clock
9 Matrox Millennium G450 DualHead
9 IRQ Holder for PCI Steering
0 Creative Labs Sound Blaster PCI64
0 IRQ Holder for PCI Steering
Intel 8237AB/EB PCI to USB Uni'versal Host Controller
IRQ Holder for PCI Steering
2 PS/2 Compatible Mouse Port
3 Numeric data processor
4 Primary IDE controller (dual fifo)
4 Intel 8237AB/EB PCI Bus Master IDE Controller
5 Secondary IDE controller (dual fifo)
5 Intel 8237AB/EB PCI Bus Master IDE Controller

Try another PCI Slot, or set IRQ 0 as RESERVED in BIOS Plug&Play configuration. Make shure you installed the dos-drivers correctly. Set the soundblaster variable correctly. And dont expect a PCI card will work with your dos-games. You will need an ISA card for 00% compatibility because: It doesnt need drivers, Dosgames will have its own, and: the card is directly accessable.

Similar Messages

  • How to change "No Password required" for Guest to "Yes"account under Somarsoft Dumpsec

    Check Content:
    Verify all accounts require passwords.
    Run the DUMPSEC utility.
    Select "Dump Users as Table" from the "Report" menu.
    Select the following fields, and click "Add" for each entry:
    UserName
    SID
    PswdRequired
    AcctDisabled
    Groups
    If any accounts have "No" in the "PswdRequired" column, this is a finding.
    Some built-in or application-generated accounts (e.g., Guest, IWAM_, IUSR, etc.) may not have this flag set, even though there are passwords present.  It can be set by entering the following on a command line: "Net user <account_name> /passwordreq:yes".

    Hi Malik,
    How to change "No Password required" for Guest to "Yes"account under Somarsoft Dumpsec
    Please contact SystemTools Technical support to get more efficient support regarding this matter:
    http://www.systemtools.com/support.htm
    http://www.systemtools.com/toolboard/
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • How to change the sysadmin password for maintenance wizard if you have forg

    How to change the sysadmin password for maintenance wizard if you have forgotten the password and can't log in.

    Log into SQL*Plus as the $EOFUSER and do:
    update eof_user set password = 'passwd_you_want' where user_id = 0;
    commit;
    -Vikki
    Product and Development Manager for Maintenance Wizard

  • How to change the Display Pattern for Decimal Fields dynamically

    hi all,
    Can any one help me how to change the display pattern for decimal fields dynamically???
    Currently I am using z,zzz,zzz,zz9.999 Display pattern for Quantity Field. If the value is blank it is displaying as 0.000 on the Screen. But I don't want this to be printed.
    Please help me how to solve this ASAP.
    Thanks,
    Prabhu

    Hi,
    Alternatively you can handle it in the context.
    In the context area, click on the quantity. In the bottom, click on the conditions tab, and put a condition
    <quan field> NE initial.
    So the field will not be printed if there is no value.
    Regards,
    Vidya Chowdhary A.

  • How to change the package name for a msg class

    Can anybody tell me how to change the package name for a message class.
    and how will it effect in the rerport?
    thanks in advance
    kp

    >>and how will it effect in the report?
    You wouldn't see any direct effect on the Report.. But if you transport the report to QA & leave the Message class in Dev, it might result in syntax issues & you will not be able to execute the report. Just ensure that both of them get transported to QA & you will be fine.
    ~Suresh

  • How To Change Root Folder Reference for href - anythingslider links?

    How To Change Root Folder reference for href - anythingslider links?
    My root folder in Web Apps>Carousel in admin is set at /carousel/ (http://bestinscotland04.businesscatalyst.com/carousel/slide-2 - as an example) but I want it to link to a specific page at the root level (specifically /scottish-menswear/mens-highland-kilt-outfit).
    I can't find the controls, css, or html file to enable my picture to link to this product page.
    I'm sorry for the amateur question - I've never had formal training and it's always a reverse-engineering situation with me.
    Thank you.

    One way to address this is to use the Virtual Web Host feature.
    I've uploaded a simple application note to help guide you through the steps.
    An alternative would be to create an html at /Web/ which forwards to /Web/Joomla.  Not a great solution, I know.
    I'm sure there is a way to change the setting in a linux configuration file, but I don't know which file that is in.  Maybe some other linux savy community members could help out with that?

  • How to change RSAPublicKeySpec to Key for encrypt?

    I have RSAPublicKeySpec and I want to encrypt message with this key.
    How to change RSAPublicKeySpec to Key for encrypt message?

    I try to do this
    try {
    kf = KeyFactory.getInstance("RSA");
    pk = kf.generatePublic(pubCard);
    catch (NoSuchAlgorithmException ex4) { System.out.println("1");
    catch (InvalidKeySpecException ex4) { System.out.println("2");
    try {
    Cipher cipher = Cipher.getInstance("RSA");
    try {
    cipher.init(Cipher.ENCRYPT_MODE, pk);
    catch (InvalidKeyException ex2) { System.out.println("a");
    try {
    ticket = cipher.doFinal(mes.getBytes());
    catch (IllegalStateException ex3) {System.out.println("b");
    catch (IllegalBlockSizeException ex3) {System.out.println("c");
    catch (BadPaddingException ex3) {System.out.println("e");
    catch (NoSuchAlgorithmException ex1) {System.out.println("f");
    catch (NoSuchPaddingException ex1) {System.out.println("g");
    It cougth exception that "NoSuchAlgorithmException"
    What wrong with line
    Cipher cipher = Cipher.getInstance("RSA");
    please tell me

  • How to change the menu text for menu exit in Version 3.1i

    Hi,
    I am working on an enhancment in CJ02 transaction in 3.1i version. I have implimented menu exit for it , but I am unable to change the menu text for it.Please let me know how to change the menu text for that menu.
    Thanks
    Suman

    Hi Shree,
    Thanks for the response. Please find the Enhancement name here "CNEX0006".
    Thanks
    Suman

  • How to change the Safety Intervals for standard Content datasources

    Go to RSA2->give your datasource name ->setting up GEN delta
    It shows you whts the safety interval setting.
    <b>
    How to change the Safety Intervals for standard Content datasources since when I go to RSA2 edit and change options are always greyed out. let me know if there is any other transaction code or table to do this.</b>
    Thanks
    Soniya Kapoor

    Hi Soniya,
    1) try  RSA6.....also  RSA8 for additional info.
    2) useful link:
        http://help.sap.com/saphelp_nw04/helpdata/en/d0/4cc138944cfa06e10000000a11405a/content.htm
    Good luck, BB

  • How to change the account setting for App Store

    My last question wasn't so clear, so I would like to post again. I want to know how to change the account setting for App Store. I have changed in the Settings but it doesn't reflect in App Store.
    Thanks,

    once you sign out just click sign in and put the new email address in the "Username" field and your correct password then click OK
    it will look like it is doing nothing but give it time and it will sign you in with the new username.
    is it possible you have multiple itunes accounts?
    when you changed your itunes account from your me.com to your gmail.com address did you change it within the itunes Edit Account Info ('Store' menu then select 'View My Account', then sign in , select edit account info) or did you just create another itunes account?
    be well

  • How to change the browser used for Google search from context menu of selected text?

    How to change the browser used for Google search from context menu of selected text?
    It uses Safari. But I want to use Chrome (it's my default browser).

    How to change the browser used for Google search from context menu of selected text?
    It uses Safari. But I want to use Chrome (it's my default browser).

  • HT1689 How to change credit card account for purchasing

    How to change credit card account for purchasing

    On your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment details link.  If you are doing it on an iOS device (iPad, iPhone or iPod Touch) then tap on your id in Settings > iTunes & App Store (Settings > Store on iOS 5 and below) and tap on 'View Apple ID' on the popup and log into your account  - that should also give you a payment details link on your account's page.
    Changing payment info : http://support.apple.com/kb/HT1918

  • PURCHASING-How to change the next approver for the Purchase Requistion(PR)-

    Hi All,
    Could you please let me know how to change the next approver for the Purchase Requistion(PR) from User "X" to "Y", as Y was manager of "X" and 'X' left the organization. how can i acheive this? can you please let me know the process ?
    Thanks,

    Hi,
    You have not mentioned the version you are using (11i or R12).. Are you using iProcurement... ? Are you using positional or Employee-Supervisor hierarchy..?
    Your question : How to change the next approver for the Purchase Requistion(PR) from User "X" to "Y", as Y was manager of "X" and 'X' left the organization.
    Ans: You can achieve this through below workarounds
    - Through *"Mass Update of Requisitions" functionality* (Conc. request) you can update the Approver name from User "X" to "Y" for existing PRs.
    - Replacing the Supervisor name of the requestor/requisitioner in the HR record (assignment) from User "X" to "Y"..
    Hope it helps.
    Kind Regards,
    S.P DASH

  • How to change email address login for this forum

    I no longer have the email address I use for this forum and was wondering how to change it if possible?

    One of these links should help you:
    http://www.info.apple.com/support/howtoid.html
    Apple ID Assistance Form/Feedback

  • How to change default PIRWBUSER password for ABAP Proxy monitoring ?

    Hi,
    Please advise how to change setting for PIRWBUSER in PI so no need to use master password PI in ECC server.
    In the Message monitoring you can have option to monitoring ABAP Proxy transaction in the other SAP Instance. But of course you need to have PIRWBUSER in that target SAP instance.
    How to change this configuration for PIRWBUSER for other SAP Instance. because other SAP instance it migh have different password for PIRWBUSER ?
    Regards
    Fernand

    Hello there.
    Please check the note below according to your system:
    #999962 - PI 7.10: Change passwords of PI service users
    #936093 - XI 7.0: Changing the passwords of XI service users
    #721548 - XI 3.0: Changing the passwords of the XI service users
    Regards,
    Caio Cagnani

Maybe you are looking for

  • Multiple Language Menus

    We're getting to the final stages of a multi-language DVD (subtitles and audio) and have been trying to figure the best method to work. Is is best to add languages and use the language sub-menus, or best to add separate menus for each language (3)? I

  • Camera for macbook pro not detecting camera since upgrade to mountain lion

    I recently upgraded from Snow leopard to Mountain Lion and I was trying to make a video call in skype. The camera worked for a minute or so then stopped working. Since then my camera hasn't been detected by my Macbook pro. Can anyone help me?

  • IAS and EJB

    Hi, I'm trying to enable the EJB examples which comes with iAS release 1 to connect to a remote oracle 8.1.6 database. Now, I'm no java expert but it throws the following error message: JBO-26061: Error while opening JDBC connection. Io exception: Co

  • LXC container arch linux does not offer login

    I am sure this is silly, but it still seems I cannot find my way out of it. I am trying to set up an archlinux container within Arch Linux. I have followed verbatim the wiki, and the added comment on how to circumvent new problems deriving from the i

  • Is there a Cisco Voip client available?

    Hi. I'm currently looking for a voip client for my mac mini. As I login through VPN to my office account from home, I'd like to be able to connect to our Cisco VOIP network. As I cannot find any relevant information regarding the availability for a C