How to change SSID for Linksys wireless switch for PC?

imac-G5   Mac OS X (10.4.4)  

Now, let's try to brake this issue down:
I need the Linksys to get a PC (Dell) running wireless. I installed a motorola PCI card for ethernet & the software that came with it in the PC. The switch does not read the network.
This involves a networking issue on a PC running Windows
The last time I spoke with Linksys they suggested http://192.168.1.1/same address, also 192.168.1.225. I get network connection errors.
This is an issue of your network setup
I have my Powerbook hard wired to the Motorola wireless router. My I-Mac is wireless.
So PowerBook & iMac work fine. Right?
You also have a Motorola Wireless Router, is this also your broadband modem?
I hooked up the Linksys switch to the modem with ethernet cat 5 cable. I still get connection errors. Neither computer can access these links. I get Motorola's broadband page with 192.168.1.1. I've done as much as I know but can't change the ssid if I can't access the Linksys switch. HELP Please!
This is a bit confusing:
What do you mean by connection errors? Unable to connect, able to connect but the connection drops?
Try this:
Shutdown your PC and both of your Macs
Turn of the Linksys switch and unplug it from the Motorola Router
Unplug the PowerBook which is wired to the Motorola and directly (with the same ethernet cable) connect it to the Linksys switch
Turn on the Linksys switch
Turn on your PowerBook
Open Safari or any other browser and go to: http://192.168.1.225 or http://192.168.1.225 (or whatever address Linksys told you)
Configure your Linksys switch (Change SSID) and save new settings
now, if everything goes fine, then:
Connect the PowerBook to the Motorola Router (just as it was before)
Connect the Linksys switch to the Motorola Router via an Ethernet Cable
Try to connect (from your PowerBook via Safari) to the Linksys switch@ http://192.168.1.225 or http://192.168.1.225 (or whatever address Linksys told you)
Keep the iMac and the PC shutdown untill you manage to set up the Linksys switch propperly
Post back feedback
a few Macs running 9.x, a bunch of Macs running 10.4.x and some serious SGI workstations running Irix 6.5.x
Message was edited by: fu

Similar Messages

  • How to change workflow for expired qualification in HR Module

    Hi,
    My question how to change workflow for expired qualification in HR Module.We need to when date is expired tcode OOQA that system will check and that time workflow should be triggred.
    I have serached sap help but i am not understand please below mention URL for SAP help
    Link: [http://help.sap.com/saphelp_47x200/helpdata/en/ee/f4c9cafbab11d29ea40000e8215202/frameset.htm]
    Please explain step by step how to trigrred workflow for expired qualification?
    Please this problem is high and try to solve it.
    Thx!
    Sachin

    Hi,
    Why do you want to trigger a wflow and what do you want to do with this trigger. Can you give more details of your exact requirements.
    But, if you are looking for how to trigger, you can write a small ABAP pgm and schedule it as a job every night. THis job basically reads the table P1000-ENDDA for expiry date and if it reached today, then you can either trigger the wflow with SAP_WAPI_START_WORKFLOW or use SAP_WAPI_CREATE_EVENT to raise your custom event(for Business Obj. BUS7018, i think this is your BO and there are no std events right now, so you will ahve to add your custom event by extending BUS7018 to ZBUS7018).
    Hope I am clear and this helps and if you need more details, reply.
    venu

  • How to change IP adress of wireless controller 2504 . from GUI

    how to change IP adress of wireless controller 2504 . from GUI 

    In the existing setup, does WLC management & APs are on the same vlan ? If that is the case you may have not configured any of the below, as AP L3 broadcast reach WLC & in that way AP will learn about WLC.
    If WLC & APs are on different vlan you may already use one of WLC discovery method listed below.
    1. DHCP Option 43
    2. DNS
    3. UDP broadcast forwarding
    4. Static configuration
    When you change the WLC management IP address, AP need to know what is the new IP & you can modify the configuration of the method you used.
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • How to change tablespace for a table in 10g?

    Does anyone know how to change tablespace for a table (like changing tablespace for an index [alter index ... rebuild tablespace ... ])? Many thanks in advance.

    alter table tablename move tablespace newtsname;
    You need to rebuild the indexes after the move.

  • How to change password for itunes

    HELP PLEASE!
    DOES ANYBODY KNOW HOW TO CHANGE PASSWORD FOR ITUNES?

    Follow the instructions here.
    Apple ID: Changing your password

  • How to change password for BtOpenZone?

    Hi,
    Does anyone know how to change password for BtOpenZone? I have tried the following link and it is not working with me....
    http://www.btinternet.com/new/content/mybti
    Last time I have to ring BT to change the password, but I want to do via some control panel.
    Thanks
    Kam 
    Solved!
    Go to Solution.

    If you're a BT Total Broadband customer and you want to change the password, you can go to btyahoo.com, log in there and change your password. The primary email account and the FON/OZ logins are linked. if you change your email password, your FON/OZ password will also change.
    if you're an Openzone only customer, you can log into your control panel on the main page and change your password there.

  • How to change password for sidadm user on HP-UX

    Hello
    How to change password for <sidadm> user on HP-UX

    Hello Jan,
           1.      Log on to the operating system with the <sid>adm user.
           2.      Open a shell.
           3.      Enter the command passwd.
           4.      Enter the old and new passwords
    Rohit

  • How to change password for apple user id

    how to change password for apple user id

    If you can't remember your current password then you should be able to get it reset via this page : http://iforgot.apple.com
    If you know your current password then on your phone you can try tapping on your id in Settings > Store and you might be able to change it on your account's screen, or on your computer's iTunes you can log into your account via the Store > View Account menu option and change it on there

  • How to change password for parental controls

    how to change password for parental control on macbook pro

    If you can't remember your current password then you should be able to get it reset via this page : http://iforgot.apple.com
    If you know your current password then on your phone you can try tapping on your id in Settings > Store and you might be able to change it on your account's screen, or on your computer's iTunes you can log into your account via the Store > View Account menu option and change it on there

  • How to change password for  XELSYSADM user in OIM?

    Hello Gurus and Experts!
    How to change password for XELSYSADM user in OIM?
    Your help is appreciated.

    Follow the undermentioned steps to change the password:
    1) Change the password from oim Design Client as usual.
    2) Open xlconfig.xml present in <XL_HOME>\xellerate\config folder.
    3) This step is optional and should only be used if you have a <XLPassword encrypted> tag in the <Scheduler> section. In the scheduler section, change the encrypted="true" to encrypted="false" and replace existing encrypted password with new clear text password, as shown below:
    <Scheduler>
    <XLUserName>xelsysadm</XLUserName>
    <XLPassword encrypted="false">NEW_PASSWORD</XLPassword>
    </Scheduler>
    4) Restart server.
    Now login with the new password.

  • How to change path for Ev4Excel.xla

    Dear All,
    I'm trying to execute predefined BPF - custom menu (ProcessFunctions.xls). Whenever if click e.g. on Back, forward, open a file following similar message is being prompted:
    Macro 'E:\Program Files\BPC\Ev4Excel.xla'!'EvMacroCall "OPENFILE","REPORTS\WIZARD\HotAnalysis\A01 Account Trend.xls","","","","","" can not be executed. Macro may not stated in this workbook or all macros can be deactivated.
    Ev4Excel.xla is resided under path E\PC_MS.
    How can I change path for macro call?
    Or any other idea?
    Regards,
    Ender

    i don't understand why do you have to change the path for Ev4Excel.xla?
    Basically this the addin of BPC into excel. I mean it is the BPC excel client.
    You are choosing the path when you are performing the installation of SAP BPC.
    So Idon't understand why do you want to change the path?
    If you want to do this you have to reinstall the BPC client and you have to choose the path wanted.
    You error is not related to the path it is more related to rights.
    I think you have to provide more details about the steps done and in what condition you observer this error.
    Regards
    Sorin Radulescu

  • How to change settings for insert table

    I use DW CS4. Don't know how this changed but now when i click insert>table the result is insertion of a table with width of 960 and 8 columns and 8 rows?
    Where can i change this back to what it was so that in properties i can set the width, the number of columns, the number of rows, etc.
    thanks for your help,
    Jim Balthrop

    JBWebWorks wrote:
    I use DW CS4. Don't know how this changed but now when i click insert>table the result is insertion of a table with width of 960 and 8 columns and 8 rows?
    Where can i change this back to what it was so that in properties i can set the width, the number of columns, the number of rows, etc.
    Dreamweaver should remember the last table definition you put on the page.
    Insert>table>Specify Rows/Columns/Width
    That should then be the default until you specify something else.

  • How to change service for all members

    Hello,
    We setup our cluster with member1 and member2 as follows.
    backup-count = 1 on cluster configuration.
    service-name = CACHE-TEST-A, which is stored in Member1
    the backup of CACHE-TEST-A is stored in Member2
    Now we change the service name CACHE-TEST-A to CACHE-TEST-B.
    The question under consideration is how to change CACHE-TEST-A to
    CACHE-TEST-B in both members.
    Test steps:
    1 Turn off the service, execute the following code:
    CacheFactory.getCluster (). Shutdown ();
    CacheFactory.getCluster (). Stop ();
    2 Modify the configuration file, the CACHE-TEST-A modified CACHE-TEST-B
    3 Restart the service, execute the following code:
    DefaultCacheServer cacheServer = new DefaultCacheServer (new DefaultConfigurableCacheFactory ());
    cacheServer.start ();
    Result:
    Service started, but the configuration file is not loaded,
    it seems that the system is still configured with CACHE-TEST-A.

    We are going to achieve as below.
    Requirements:
    In the existing cluster nodes without adding a new premise, deploy new business class package (based on CacheStore the jar), also updating some of the Cache service scheme of the configuration.
    Solution:
    We use the above coding part (using a custom Jmx and DefaultCacheServer to stop and start nodes) to achieve the requirement, but do not know whether any other better solution for this.

  • How to change setting for 'last 5 password change prompt'

    hi friends
    in sap, when a user changes a password sometimes he/she gets a message "Please select a password that is different from last 5".
    now i am in need to change this default value of "5" to "2" but i dont know what is the parameter name for changing this setting.
    i would appreciate if anybody can tell me how to change this setting.
    many thanks
    regards

    Hi nathan drake
    The parameter for password history is   login/password_history_size = 5
    you can change to 2.
    Regards,
    Firoz.

  • How to change date for Compensation Package Offer (IT0706)

    I try to change date for an existing record in IT0706 to a later date, however system prompted "The compensation package was already activated. It can not be changed" As I checked, the record status is "Activated". Can anybody help to advice on how to change the date ?
    Thanks~

    Hi Kishor...Thanks for reply...
    But i need to change my precentation variable date formt...
    i need to write one text like: 'Year to dd/month/yy' in one column formula..
    So how can i achieve it..

Maybe you are looking for