How to change subsequent URL

Hello My-portal-to-understanding,
I am running EP6.0 SP14.
I have a portal role named Logoff and a iView named Logoff that runs the parameter "logout_submit=true".  The user clicks this tab when wanting to Logoff the portal.  This works great in that it logs the user out of the portal instantly.  (The Logoff link in the masthead was not an option that the user liked.  A Logoff tab was the only solution.)
The problem is that after logoff, the URL to this Logoff iView still exists in the URL address window.  Consequently, if the user attempts to login again, the portal logs the user in, positions them on the last known tab (which is the Logoff tab), and logs them out instantly.
Any suggestions?
Thanks,
Kevin

What container do you have for OBIEE? OC4J? OAS? Other?
The solution differs depending on your environment.
-Joe

Similar Messages

  • How to change the url of "Add New Item" of a particular list in SharePoint 2013???

    Hi Guys,
    How to change the url of "Add New Item" of a particular list in SharePoint 2013???
    I need to redirect it into the page where I have created my Visual web part.
    Please suggest
    Warm Regards,
    Tony Joy

    Hi,
         There are multiple ways to change the form url like javascript, SharePoint designer, custom code, editing default form to have custom web part etc, Please follow the url below that describe diffent methods and steps
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/ec2769a0-683c-4023-8804-b596e4f92a3a/change-default-forms-on-custom-list?forum=sharepointcustomizationlegacy
    Hope it helps!!!
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. Thanks, Ajeet

  • How to Change attachment URL on a Purchase Req?

    Attachments in the EBP shopping carts are transferred to an ITS server and are linked to a back end R/3 Purchase Requisition. 
    Note that the attachments are physically stored on ITS server and the link (URL) to the attachment and Purchase Req is stored in SAP. 
    As a part of decommissioning, the server which was used for storing attachments is replaced with a new server and all the attachments are moved to new server.  
    Since the link associated to the Purchase Req and attachment is not changed, when user is trying to open the Purchase Req attachment, it is not displaying becuase all the attachments are moved to new server. 
    How to change the link (URL) in the Purchase Req so that it will point out to the new server instead of old server. 
    Due to the following reasons manually changing the URL is not advisable.
    1) 40,000 attachments link need to be changed.
    2) System is not allowing to change the URL manually because of the user differences.  All the attachment links are attached to Purchase Reqs by RFC user (since these are transferred from EBP environment). 
    Please advise what should be the feasible solution to change the URL (link) on the Purchase Req so that business can open the attachment with no issues.
    Thanks in advance

    According to SAP, since purchase order is a legal document they do not support the process of changing document number.  They suggested I do the change with debug and replace at my own risk.  In ME22N go to debug and type MEPO_TOPLINE-BEDAT.  The values for this field show up as 29991231 that should be changed to 20191231 and press F8, then save the purchase order.

  • How to change the URL

    Hi All,
    I have created a web dynpro application and now I  need to change the URL of this application to some basic message type URL for eg:
    let's say our URL is "http://testdoc/post?mssg" and I now want to change this to as "OPEN DOCUMENT" and when user clicks on ""OPEN DOCUMENT" it will still direct to the original destination that is our original URL.
    Thanks,
    Rajat

    I used the following syntax:
    <A href="http://forums.sdn.sap.com/">display SDN</A
    >
    Edited by: rajatg on Oct 6, 2010 4:43 AM

  • How to change the URL of a URL-iView over Code ?

    Hi all,
    i am getting started with the Portal-Application-Developement and want to change the URL of an URL-iView on runtime with java-code.
    i have read the context and can get the Property url with this statement.
    endContext.getProfile().getProperty("url")
    But if i change this property, nothing is done.
    endContext.getProfile().setProperty("url", "http://www.yahoo.com");
    Where is my fault.
    Thanks for help.
    Regards Jürgen

    Hi,
    the context is of Type IPortalComponentContext.
    I cant find no method getParameter() at the context or the profile.
    The methods to read the properties of the URL-iView are
    context.getProfile().getProperty("url")
    context.getProfile().getAttributeValue("url")
    But if i want to set (change) this attribute, nothing is done.
    Regards Jürgen

  • How to change Workspace URl in 11.1.2.3 and change the image in login

    I recently upgraded to 11.1.2.3 Everything works fine but the Planning Application is not working from the regular URL. We have a custom URL where it does not shows the server name When I try to access it with the regular URL with the server name it works fine. I want to know if there is a way that I can change the URL to custom I want to know if there was a way to change the login image in the workspace This is for Version 11.1.2.3

    Check below blog for workspace image change:
    http://www.orahyplabs.com/2012/01/customizing-epm-workspace-1112.html
    Also, check *mod*.conf file for port number of planning, it will be under ORACLE_INSTANCE/httpconfig/config/OHS/ohs_component.
    Hope this resolve your issue!
    Cheers!
    Sh!va

  • How to change route url login home sap at .../irj/portal

    dear all,
    is possible to change login home page url sap portal with another file except loginPage.jsp
    how to route index page to another file jsp custom?
    and can you describe to me how route structure /irj/portal file because i will custom another file
    thank you

    Hi
    If you are trying to redirect the /irj/portal to a custom path then you can use the ICM parameter
    icm/HTTP/redirect_0 = PREFIX=/irj/portal, TO=/<yourcustompath>
    Either in your Portal app server or in your Web Dispatcher if you have a web dispatcher fronting your Portal.
    Cheers
    Donald

  • Extended Notifications: how to change the URL link

    Hello,
    We are on ECC6. We use Extended Notifications to alert users to the presence of new workitems, but when they click on the link to execute the workitem, they're presented with the login screen.
    We have been able to send emails from workflow which contain a link that does not ask for a login so I know which URL to use. The problem is, how can you set the URL in Extended Notifications? How does it decide which URL to use? I've tried changing a few General Settings in SWNCONFIG, none of them made a difference.
    Any hints, tips, suggestions would be appreciated.
    regards
    Rick Bakker
    Hanabi Technology

    Hi Rick,
    I wrote my own notification handler to solved an link issue (wanted to point to a specific iView url). I changed the notification handler via Category and double clicking on the category:
    Scenario                        WORKFLOW                       
    Category                        ZCATEGORY                    
    Description                    Adobe Administrator                            
    Requested Reliability          0 Undefined                                    
    Collective Message             A Grouping with Othe                           
    Notification Priority          5 Medium                                       
                                   Delete After Send                              
    Category Handler               CL_SWN_CATEGORY                                
    Notification Handler           ZCL_SWN_NOTIF_WF                          
    Handler for User               CL_SWN_USER_STD                                
    Have a look at some of the methods:
    LOAD_INSTANCE_WA
    ADD_LINKS_ACTION
    ADD_LINK_ACTION_DISPLAY
    ADD_LINK_ACTION_EXECUTE
    ADD_LINK_ACTION_DECISION
    CREATE_ACTION_ATTACHMENT
    CREATE_INBOX_ATTACHMENT
    Hope it helps you understand how the link is created.

  • I dont't know how to change my URL

    My URL: lave0134.site44.com/dsn1568/exercise-css.html
    I would like to remove the ".html" at the end but I dont't know how to do it.
    I've deleted the ".html" in the document name in my files but it still appears in my URL.

    Every web page you create in DW will need to have a .html, .htm, .shtml, .shtm or .php file extension.  This tells browsers & your server that it is a web page.
    CSS is not an HTML document.
    If you want exercise to be the url, you must create an index.html page and put it inside a folder named exercise.
    In the DW Files Panel (F8), your local site would look something like this:
    SITENAME (C:\your_site_folder)
         +exercise
              index.html
         +about
              index.html
         +contact
              index.html
         index.html (your site's home page)
    Personally, I don't see any value in doing this.  It just makes your site more complicated with all those extra index pages.
    Nancy O.

  • How to change the OraSSO login link in webcache/load balance

    Hi
    we have 10gAsR1 installed as a Portal instance. We have 6-server
    load balancer => webcache as loadbalancer (listening port 80)
    Wb ch1 and wb ch2 => webcache (listening port 7777)
    portal1 and portal2 => Portal listening 7778
    infra =>Infrastruture with repository Portal/Oracle SSO (listening 7777)
    This set up is working fine for our intranet setup, now we need to open this for couple of external clients. Well initially we need to open on the load balancer server on port 80 for external team to access, it works fine when we make it publc access.
    Now when we need to make it SSO (siteminder) enables, when users click on login link it first goes oracle sso then it internally redirects the page to site minder sso.
    Well, I have noted that the sso server details are mentioned in global setting sso/oid details. Since we need to open this for external client we have to add a DNS entry for this so that we can allow its access over firewall..
    Now I have made DNS name change at my infrserver level, now I need to update the change at the load balancer server (where wheb chache is running).
    Any one know how to chang the URL at load balancer.
    I am struck at this point please suggest how should i proceed..
    Thanks,

    Extract from Personalization Guide - Page Footer - Personalization Considerations
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

  • How to edit the URL in the mail that is triggered from Solution Manager 7.1 ?

    Hi,
    When we perform an action "To Be Approved" for an RFC (Request For Change) in Solution Manager, a mail will be triggered to the respective Change Manager. In that mail, a link will be there which will guide the Change Manager to the SAP Logon Pad.
    The problem is, the link in that mail is not pointing towards the required system. It is taking the change manager to Development system instead of Production System.
    Can you please help me, how to change this URL link in that e-mail that is being triggered when the action is performed. I just need to remove the Development system URL and paste the Production system URL.
    Thanks in advance,
    Bharath.

    Hi Bharath,
    Please check below Blog and KBA:
    Incident Management and Change Request Management: E-Mail functionality
    in SAP Solution Manager 7.1
    http://scn.sap.com/docs/DOC-35291
    1831361 - Solution Manager - Changing status in CRM_UI gives BSP error
    Exception Class - CX_SY_DYN_CALL_PARAM_MISSING
    Thanks
    Vikram

  • Change Portal URL in MSCS Java

    How to change Change Portal URL in windows cluster. We have installed sap web dispatcher but with out port it's not connecting to portal url.
    my system is NetWeaver AS JAVA with EP 7 sp13
    Would like to change url mentioned below.
    http://hostname.company.com:50000/irj/portal to  http://hostname.company.com
    Please help.
    Regards
    Mahesh

    Hi,
    I need change my portal url from to http://hostname.company.com:50000/irj/portal to  http://hostname.company.com
    This will give users a more user friendly URL and this possible. We are already using this type of portal url (ex:) for Prod system.
    Plese see below link for non cluster how to Change Portal URL but this does't work for MSCS. Hope understand my question.
    https://wiki.sdn.sap.com/wiki/display/EP/Change%2BPortal%2BURL
    Regards
    Mahesh

  • Change the URL displayed

    Good morning
    how to change the URL displayed during the execution of a 10g application forms with IAS 10g.
    Instead of displaying
    http://nomserveur:7778/forms/frmservlet?config=App
    we display
    http://www.societe.com

    Easiset way is to redirect societ...com to the forms url which can be done in the proxy/firewall or in the webcache of IAS

  • How do I use Sun Web Server 7.0u1 reverse proxy to change public URLs?

    Some of our installations use the Sun Web Server 7.0 (update 1, usually)
    for hosting some of the public resource and reverse-proxying other parts
    of the URI namespace from other backend servers (content, application
    and other types of servers).
    So far every type of backend server served a unique part of the namespace
    and there was no collision of names, and the backend resources were
    published in a one-to-one manner. That is, a backend resource like, say,
    http://appserver:8080/content/page.html would be published in the internet
    as http://www.publicsite.com/content/page.html
    I was recently asked to research whether we can rename some parts of
    the public URI namespace, to publish some or all resources as, say,
    http://www.publicsite.com/data/page.html while using the same backend
    resources.
    Another quest, possibly related in solution, was to make a tidy url for the
    first page the user opens of the site. That is, in the current solution when
    a visitor types the url "www.publicsite.com" in his or her browser, our web
    server returns an HTTP-302 redirect to the actual first page URL, so the
    browser sends a second request (and changes the URL in its location bar).
    One customer said that it is not "tidy". They don't want the URL to change
    right upon first rendering the page. They want the root page to be rendered
    instantly i the first HTTP request.
    So far I found that I can't solve these problems. I believe these problems
    share a solution because it relies on ability to control the actual URI strings
    requested by Sun Web Server from backend servers.
    Some details follow, now:
    It seems that the reverse proxy (Service fn="service-passthrough") takes
    only the $uri value which was originally requested by the browser. I didn't
    yet manage to override this value while processing a request, not even if
    I "restart" a request. Turning the error log up to "finest" I see that even
    when making the "service-passthrough" operation, the Sun Web Server
    still remembers that the request was for "/test" (in my test case below);
    it does indeed ask the backend server for an URI "/test" and that fails.
    [04/Mar/2009:21:45:34] finest (25095) www.publicsite.com: for host xx.xx.xx.83
    trying to GET /content/MainPage.html while trying to GET /test, func_exec reports:
    fn="service-passthrough" rewrite-host="true" rewrite-location="true"
    servers="http://10.16.2.127:8080" Directive="Service" DaemonPool="2b1348"
    returned 0 (REQ_PROCEED)My obj.conf file currently has simple clauses like this:
    # this causes /content/* to be taken from another (backend) server
    NameTrans fn="assign-name" from="/content" name="content-test" nostat="/content"
    # this causes requests to site root to be HTTP-redirected to a certain page URI
    <If $uri =~ '^/$'>
        NameTrans fn="redirect"
            url="http://www.publicsite.com/content/MainPage.html"
    </If>
    <Object name="content-test">
    ### This maps http://public/content/* to http://10.16.2.127:8080/content/*
    ### Somehow the desired solution should instead map http://public/data/* to http://10.16.2.127:8080/content/*
        Service fn="service-passthrough" rewrite-host="true" rewrite-location="true" servers="http://10.16.2.127:8080"
        Service fn="set-variable" set-srvhdrs="host=www.publicsite.com:80"
    </Object>
    I have also tried "restart"ing the request like this:
        NameTrans fn="restart" uri="/data"or desperately trying to set the new request uri like this:
        Service fn="set-variable"  uri="/magnoliaPublic/Main.html"Thanks for any ideas (including a statement whether this can be done at all
    in some version of Sun Web Server 7.0 or its opensourced siblings) ;)
    //Jim

    Some of our installations use the Sun Web Server 7.0 (update 1, usually)please plan on installing the latest service pack - 7.0 Update 4. these updates addresses potentially critical bug fixes.
    I was recently asked to research whether we can rename some parts of
    the public URI namespace, to publish some or all resources as, say,
    http://www.publicsite.com/data/page.html while using the same backend
    resources.> now, if all the resources are under say /data, then how will you know which pages need to be sent to which back end resources. i guess, you probably meant to check for /data/page.html should go to <back-end>/content/page.html
    yes, you could do something like
    - edit your corresponding obj.conf (<hostname>-obj.conf or obj.conf depending on your configuration)
    <Object name=¨default¨>
    <If $uri = ¨/page/¨>
    #move this nametrans SAF (for map directive - which is for reverse proxy within <if> clause)
    NameTrans.. fn=map
    </If
    </Object>
    and you could do https-<hostname>/bin/reconfig (dynamic reconfiguration) to check out if this is what you wanted. also, you might want to move config/server.xml <log-level> to finest and do your configuration . this way, you would get enough information on what is going on within your server logs.
    finally,when you are satisfied, you might have to run the following command to make your manual change into admin config repository.
    <install-root>/bin/wadm pull-config user=admin config=<hostname> <hostname>
    <install-root>/bin/wadm deploy-config --user=admin <hostname>
    you might want to check out this for more info on how you could use <if> else condition to handle your requirement.
    http://docs.sun.com/app/docs/doc/820-6599/gdaer?a=view
    finally, you might want to refer to this doc - which explains on ws7 request processing overview. this should provide you with some pointers as to what these different directives mean
    http://docs.sun.com/app/docs/doc/820-6599/gbysz?a=view
    >
    One customer said that it is not "tidy". They don't want the URL to change
    right upon first rendering the page. They want the root page to be rendered
    instantly i the first HTTP request.
    please check out the rewrite / restart SAF. this should help you.
    http://docs.sun.com/app/docs/doc/820-6599/gdada?a=view
    pl. understand that - like with more web servers - ordering of directives is very important within obj.conf. so, you might want to make sure that you verify the obj.conf directive ordering is what you want it to do..
    It seems that the reverse proxy (Service fn="service-passthrough") takes
    only the $uri value which was originally requested by the browser. I didn't
    yet manage to override this value while processing a request, not even if
    I "restart" a request. Turning the error log up to "finest" I see that even
    when making the "service-passthrough" operation, the Sun Web Server
    still remembers that the request was for "/test" (in my test case below);
    it does indeed ask the backend server for an URI "/test" and that fails.
    now, you are in the totally wrong direction. web server 7 includes a highly integrated reverse proxy solution compared to 6.1. unlike 6.1, you don´t have to download a separate plugin . however, you will need to manually migrate your 6.1 based reverse proxy settings into 7.0. please check out this blog link on how to set up a reverse proxy
    http://blogs.sun.com/amit/entry/setting_up_a_reverse_proxy
    feel free to post to us if you need any futher help
    you are probably better off - starting fresh
    - install ws7u4
    - use gui or CLI to create a reverse proxy and map one on one - say content
    http://docs.sun.com/app/docs/doc/820-6601/create-reverse-proxy-1?a=view
    if you don´t plan on using ws7 integrated web container (ability to process jsp/servlet), then you could disable java support as well. this should reduce your server memory footprint
    <install-root>/bin/wadm disable-java user=admin config=<hostname>
    <install-root>/bin/wadm create-reverse-proxy user=admin uri-prefix=/content server=<http://your back end server/ config=<hostname> --vs=<hostname>
    <install-root>/bin/wadm deploy-config --user=admin <hostname>
    now, you can check out the regular express processing and <if> syntax from our docs and try it out within <https-<hostname>/config/<hostname>-obj.conf> file and restart the server. pl. note that once you disable java, ws7 admin server creates <vs>-obj.conf and you need to edit this file and not default obj.conf for your changes to be read by server.
    >
    I have also tried "restart"ing the request like this:
    NameTrans fn="restart" uri="/data"
    ordering is very important here... you need to do this some thing like
    <Object name=default>
    <If not $restarted>
    NameTrans fn=restart uri from=/¨ uri=/foo.
    </If>

  • How to change the privacy statement link url

    I looked into the previous threads , could not find the answer to "Changing the privacy statement url to clients privacy statement url".
    I am talking about the privacy statement URL in the page that user see it as soon as user logs into the e-business suite.
    I have read the previous theads and developers guide regading how to show or hide this autofooter thing. but could not find any thing about how to change the one in the login page.I even looked ino personalization but could not find a place to change this url. please HELP.
    Another question is " is it ok to show privacy statement in just the first page and hide it in rest of the application pages?"
    Thanks
    karan

    Extract from Personalization Guide - Page Footer - Personalization Considerations
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

Maybe you are looking for