How to change TCP/IP port number on a HP CM2320 printer ?
Hi,
I have a HP CM2320 printer, and would like to be able to print to it from the internet.
I have set up Port Forwarding of Port 9100 against an other printer, so I can't use the same port.
My router is a Technicolor TG582N, I tried to setup port Translation from outside port 9102 to inside port 9100 pointing to this printer, but without any luck.
My question would be:
Could I change by any means the port number on the HP CM2320 printer so that it accepts printing on port 9101 or 9102 instead of 9100?
Thank you,
Elemer
Hello elemer82, and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at the LaserJet Commercial Forums..
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.
Similar Messages
-
How to change the listener port number on a standby database
i want to change the listener port number from 1525 to 1545, which is running on a standby database.
i did the following steps and got some error.
1. i stop listener and modfy listener.ora
2. i login in standby DB and issue 'alter system set local_listener='(address=(pro=tcp)(host=10.10.10.10)(port=1545))';'
3. i login in dg broker and issue 'edit database 's1' set property 'LocalListenerAddress'='(address=(pro=tcp)(host=10.10.10.10)(port=1545))';' and a error coming out ORA-16703: cannot set the property while the database is enabled
4. then i disable database
DGMGRL> disable database 'ssmscs';
5. DGMGRL> edit database 's1' set property 'LocalListenerAddress'='(address=(pro=tcp)(host=10.10.10.10)(port=1545))';
Error: ORA-16541: site is not enabled
Configuration details cannot be determined by DGMGRL
what can i do ? can anybody help me out? thanks in advance.
Edited by: user1835127 on Nov 19, 2008 2:09 AMHi
You have to edit the following files in $ORACLE_HOME/network/admin or $TNS_ADMIN/ :
In your listener.ora on your standby
MQ_LIST =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = superman.dk)*(PORT = 1524))*
TNSNAMES.ORA (on your primary and standby)
MQ_LIST =
(DESCRIPTION =
(ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = superman.dk)*(PORT = 1524))*
(CONNECT_DATA = (SID = MQ_LIST))
after that do
lsnrctl reload -
How do I find a tcp/ip port number?
I am trying to connect to a Seimens S7-300 through an ethernet connection. I have it's IP adress and can ping through command promt but using VISA in NI-MAX requires a port number when using socket connection.
How do I determine the port number to enter and start a valid VISA resource?
Thanks,
NickI have very little experience with ethernet communication, but have a project that requires it.
I am trying to connect LabView to one of our product that uses Ethernet/IP. Our product currently uses software from the vendor to communicate, and it is buggy and cumbersome, so my boss has decided that we should test this product with LabView.
I am trying to establish ethernet communication with our product by following the video at
http://zone.ni.com/wv/app/play_doc/p/id/wv-1653/width/800/height/640/autostart/y
I am able to ping the product.
When I create a new device and interface in MAX, choose VISA TCP/IP Resource, both the Manual Entry of LAN instrument adn Manual Entry of Raw Socket require a Port Number. I have entered the port from Wireshark (file included) 546 and also tried 547, but MAX replies with "Could not open a VISA session to "TCPIP0::192.168.0.3::546:OCKET". Error code 0xBFFF0011.
By looking at the wireshark screen dump, can you tell me if I am trying the wrong port? How can I get this working?
Thanks.
metzler CLAD
Attachments:
wireshark ethernet screen.docx 213 KB -
How to change the default port of webdispatcher
Hello Everyone,
We wish to know to how to change the default port of SAP webpatcher port from 81$$ to 80.
Appreciate your response.
Thanks,
VadiHello Vadi
you have to change the PORT value in your profile parameter from 81$$ to 80
icm/server_port_0 = PROT=HTTP,PORT=81$$ to
icm/server_port_0 = PROT=HTTP,PORT=80
Also, in SMICM, then change http service port and activate it and above parameter will require SAP restart
$$ is used generally to accomodate multiple port services running in SMICM and so as to avoid the parameter setting according to instance number of any system.
thanks
Bhudev -
Hi
I want to change the HTTP port number of the SAP web AS .Any idea on this how can i do that ?
regards
rajeshHi Rajesh ,
just go throgh this link , u can change this using Visual Administrator
http://help.sap.com/saphelp_nw04/helpdata/en/5b/82d3c3ee9691418e6b0281f933a37d/frameset.htm
Regards
Kishor Gopinathan -
Changing the admin port number
Greetings all,
I have just become the proud father of a weblogic 9 installation and the admin before me changed the admin port number. As I have NO experience with weblogic, could someone be so kind as to tell me where I can find the port number being used for the admin console?
Thanks!
Earnie!Earnie,
First, try port 9002 (https) since that's the default.
If that doesn't work, have a look in DOMAIN_DIR\config\config.xml. In there you'll find something like this:
<administration-port>1234</administration-port>
There ya go!
Mike
Weblogic/J2EE Security Blog: http://monduke.com -
HT3625 How to change the audio port function (input, output) on OSX 10.9.2 !!!! :(
The thing is that i saw some videos, and search for options of how to change the audio port. And even apple says that i have to change it from system preferences, but when i try to change it, the option doesn't appear me.
-
i have recently changed networks to giffgaff but now my voicemail button doent work does anyone know how to change the voice mail number so it works again? thanks
GiffGaff are not a supported UK Apple carrier .That is probably why you have lost Voicemail they are a cheap carrier who provide minimum services ,do they even offer voice mail
Go talk to them -
Changing the listener port number in a cluster environment
Hello,
I have an Oracle 10g database on a Windows cluster environment with Oracle Fail safe. I am trying to change the default listener port number - these are the steps I have done to change the port number:
1) Take the listener offline via Oracle Fail safe
2) stop the original listener from the command line
3) change the port number in the listener.ora file & save
4) start the original listener
5) bring the listener online in Fail safe
6) register the listener in the database with ALTER SYSTEM SET LOCAL_LISTENER....
After all this, when i check the status of the listener via lsnrctl, i see that the new port number is used, however in the Fail safe administrator, I still see the default port 1521. How do I go about changing the port number so that Fail safe also registers the change?I did troubleshooting to verify the group, but this just changed the port number back to the default in the listener.ora & tnsnames.ora.
So I did all the steps again to change the port number from the default to another - via lsnrctl status, i see that the new port number is being used, I can also log in to the database via Toad using the new port number, in v$parameter i see that the local_listener is registered on the new port number....only under the Fail Safe manager, the port number (under listener parameter) has not changed....it still shows the default port number. Anyone know how to change this??? -
Changing the Listener Port Number
Hi RACers,
I need to change the TNS listener port number from the default of 1521 (don't ask!).
I'm on Solaris10/Oracle10g 10.2.0.3 using a 2 node cluster.
I've tried editing the relevant files, bouncing everything and re-starting CRS, but that doesn't work. I tried using Netca to delete the listener and re-create it with a different port number and that didn't work either. The instances did not re-register despite having their local_listener parameter changes.
Obviously I'm doing something wrong, but don't know what. Any ideas or do you know where a procedure to do this is documented?
Thanks in advance.My posting was not aimed at the OP at all.. not his fault that Oracle insists on using a TCP port that's NOT registered for Oracle use.
It is all Oracle's fault that port 1521 is used instead of 1527.
As for what Oracle books say.. bahumbug. Means nothing ito playing by the same networking rules as everyone else.
Port 1527 is what is registered for and by Oracle as use for Oracle tcp traffic. Not fricken port 1521!
And why is this a problem?
If you're in the network business and deal with everything and anything from network analysis and management to rewriting ToS bytes for proper DiffServ application.. then it is very frustrating to find a major company like Oracle ignoring the networking rules.
I read that as Oracle telling us "screw you". -
Status Agent Not Reachable - How to set a fix port number?
My EM 10g was working fine http://localhost:5500/em
Now when I tried, it was not working. I looked into portlist and found out it there was additional port of 5502
But when I logged into port 5502, Status Agent Not Reachable. Other links were working fine.
I had even installed another DB called REPOS other than the default ORCL.
All the services were up and running and I was just bouncing services back and forth and luckly I got the original port 5500 to work and then I did not got the error "Status Agent Not Reachable".
So I just wanted to know how to set a dedicated port in case the port number changes back to 5502 and if I get the error again.
Thanks in advance.Yes I installed multipe databases for eg ORCL was the default but I installed REPOS.
I did not uninstall the db.
Why does it show two different ports for ORCL 5500 and 5502 and for Repos it shows two ports but they are the same 5501.
Everything is on my local machine.
Following is from the portlist
Ultra Search HTTP port number =5620
Enterprise Manager Agent Port =
iSQL*Plus HTTP port number =5560
Enterprise Manager Console HTTP Port (orcl) = 5500
Enterprise Manager Agent Port (orcl) = 1830
Enterprise Manager Console HTTP Port (repos) = 5501
Enterprise Manager Agent Port (repos) = 1831
Enterprise Manager Console HTTP Port (ORCL) = 5502
Enterprise Manager Agent Port (ORCL) = 1830
Enterprise Manager Console HTTP Port (repos) = 5501
Enterprise Manager Agent Port (repos) = 1831 -
Change the SMTP Port number in OIM
Hi All,
I have an email server that its SMTP port is 135.
My question is:
How can I change the SMTP Port from 25 to 135 in OIM? Because the notificacions are sent by Port number 25
Thanks & Regards,
ArielI actually don't have any other ideas on where this could be configured. I think that the port can be changed if you send emails programmatically but if you use the default OIM email system I don't know any other place where this could be configured.
Have you tried opening an SR with Oracle?
Best regards
/Martin -
How to free tcp/ip port in Mac OS X v10.6 Snow Leopard
weeks ago i installed graboid on my imac and it's having trouble downloading files. this is what appears whenever i open graboid:
+SABnzbd.py 0.4.6 failed to start.+
+The Graboid Download Manager needs a free tcp/ip port for its internal web service.+
+Port 11234 on localhost was tried , but it is not available.+
+Please ensure that your firewall grants access to GraboidDLManager.exe and port 11234 and 119 aren't blocked.+
+Some other software may be using the port or the download manager is already running.+
+Please verify that another instance of the download manager is not already running. To do this, press CTRLShiftEsc or open your task manager. Make sure the Processes tab is selected and look for "GraboidDLManager.exe" in the list. If it is there, click on it and then press the "End Process" button. After that, please restart Graboid.+
+Open a Terminal window and type the line (example):+
+/Applications/SABnzbd.app/Contents/Resources/SABnzbd.py --server localhost:11235+
+Open a Terminal window and type the line (example):+
+/Applications/SABnzbd.app/Contents/Resources/SABnzbd.py --server localhost:11235+
"/>
how do i free a port in snow leopard? i already allowed incoming connections from graboid in my security preferences but still it wouldn't work. help please. thanksDo you use a router to connect to the internet? If so the port needs to be mapped to your local machine.
-
Changing ACS Administrative Port Number
Hi,
Can I change the Port Number of 2002 of ACS to 2003?
thanks.you have the ability to configure the port range that the ACS admin program will use., by going to Administration Control --> Access Policy --> HTTP Port Allocation.
-
How to test if a port number is already in use ?
Hi,
How can I know if a given port is already is use by another program ? I have wrote a TFTP Server in Java that is working on (of course) port 69. The problem, is that I have to start the server with admin rights, because it uses port 69. I then have to start another program (with user rights) and I have to be sure that the TFTP server is running. So how can I test if the port number 69 is already in use, i.e my TFTP Server is already running ?
Thanks
ChrisI should add a few things, because it would actually be simple to test this with a simple
Socket s = new Socket("localhost",69);
If I had a IOException, it is almost sure that the server is not running on port 69. Now even if I start the server, i.e the thread to listen on 69, if I do a port scan or use the above code, I have as reponse that there is nothing on port 69. Why this ? It is because I use DatagramSocket ? Or because the port becomes active only after the first exchange of data ?
Thanks
Chris
Maybe you are looking for
-
LMS 4.1 W2k8 R2 I recently installed 17 stacks of 3560V2 switches at a site and added them to LMS4.1. What I have found is that data collection is failing for all but the top switch in the stack. In other workds, in some cabinets I may have 4 switc
-
Hi I am an amateur newbie on EBS I am setting up a sandbox test environment using AMAZON AWS OVM template for EBS 12.1.3 I get the vision demo DB up running. Following the post below: http://www.oraclenerd.com/2009/12/ebs-install-part-3.html However,
-
i plug computer into the computer and i hear three little rings..instead of one..but it doesn't connect and all it does is charge..i tried everything possible. Can anybody help?
-
Weird colour behaviour in JTextField
Hi, I've set the background color of my JTextFields, but they keep on changing hue, and fragments of text on the JPanel - for example, text from buttons, or from titles appear in the JTextFields. I've set the color like this: Color mandatory = new Co
-
When we tried to open firefox 4, all previous settings and bookmarks were gone. Firefox 4 gives message that it is not supported by our system. IMAC G5 power PC with 2 gigs of Ram. Is there any way to restore the old firefox?