How to change temp directory (i don't want c documents & settings) in creative zen to

Hi
i have zen touch 40 gb and i want to change temp directory from c:\documents and settings\......... to what i want to
how to do it's

Both the variable TEMP and TMP should be defaulted to the Local Settings\Temp directory. Is that not the case?
If they are just change them to where you want.

Similar Messages

Documents saved in firefox format cannot be viewed in the preview pane. Why? Also, I don't want my documents changed to another format. How do I change back?

Documents in Firefox format do not open automatically in the preview pane. Why? Also, I don't want my documents changed from the original format. How do I change them back and how do I keep this from happening again. I don't want to have to select a different format every time I try to open a document. That is a pain in the neck. I want to "click to open" and the document be in it's original format. If necessary I will go back to one of the other browsers I have used in the past. As I don't want multiple browsers on my computer it would be necessary to uninstall Firefox. I like it so far other than you all hijacking my documents and altering the way they open. You also might want to remember that even the "legitimate" folks on the internet are seen as predatory, i.e., gathering information, tricking us into installing crap we don't want or need, and in some cases, requiring a specific program to open a specific document. I'd be working very hard to show you are trustworthy. If you have a solution to this and it is complex then you will be wasting your time and my time trying to explain it. You guys created this so, if I'm going to use Firefox, you fix it on your end. FYI, if I have to uninstall Firefox I will, when asked, strongly recommend against using your service. Thank you.

Do you mean PDF documents?
The installer was supposed to add Firefox as an ADDITIONAL viewer for PDFs, not as the DEFAULT viewer. Sorry you were affected by this glitch and hopefully they will figure out why some systems get changed this way.
You can try this fix suggested by a user in another thread:
# Open Adobe Reader / Acrobat*
# Edit->Preferences
# In the Categories column click 'General'
# Near the bottom of the page click the button marked 'Select Default PDF Handler'
# In the dialog, select 'Adobe Reader XI' (or Adobe Acrobat, as the case may be) and click 'Apply'
# A Windows Configuration screen will appear. Allow it to do its stuff (takes a few minutes), then restart your computer when prompted.
Does that work for you?
''*'' If you do not have Adobe Reader 10 or 11, you can install it from here: http://get.adobe.com/reader/

Every morning when I awaken my MacBook Pro, I come to find that my Safari browser has been closed. How to fix this? I don't want to lose anything I have possibly typed in a site that I have left to finish working on for later.

Every morning when I "awaken" my MacBook Pro, I come to find that my Safari browser has been closed on it's own. How to fix this? I don't want to lose anything I have possibly typed in a site that I have left to finish working on for later. I checked system preferences and everything seems to be checked appropriately as well as for Safari's preferences.
I am not sure what's going on, because Safari only just recently started doing this and I haven't downloaded anything, nothing out of my regular computer routine. As well, I upgraded to Mavericks when it came out and I have the last version of it too. I can't imagine that Safari would close simply because I don't have or want to upgrade to Yosemite. I am holding off on the upgrade for a bit, because I heard Final Cut Pro 7 can't be run on Yosemite. While I could partition my drive, I really don't want to. Mavericks is fine for right now : )
Okay sooooo...back to Safari...what the! Please help and thanks for any replies ahead of time!
I Hope All Is Well In Your World : )
Nyna

There's an Apple help page on the DNS problem - at http://support.apple.com/kb/TS3408
The first thing to try is changing your DNS settings - and for that you need to open System Preferences, then the
Network section.
In Network - click on Advanced - then the DNS tab
under DNS servers - use the + button to enter two extra lines
either these, from google dns
8.8.8.8
8.8.4.4
or from OpenDNS
208.67.222.222
208.67.220.220
then click OK & then 'Apply'
You would need to do that seperately for the Cable (Ethernet) settings and Wireless (Airport)

I can't figure out how to erase/remove apps I don't want anymore.

I can't figure out how to erase/remove apps I don't want anymore.

RyneS086 wrote:
the IPhone does not come with a user manual.
it's in the default Safari bookmarks and via simple Google search..
http://support.apple.com/manuals/

How can I stop what I don't want?

How can I stop what I don't want?

Sorry, but you'll need to provide a more complete explanation as to what it is you wish to do before anyone can offer intelligent advice.
Regards.

How to change output directory in Template Builder

Hi,
I'm using XML Publisher 5.5. standalone. When I use the Preview-Function in Template Builder to generate RTF output with MS Word, I want to change the directory in which the generated Files are located. How can I do this?
Mirko

The temp files are in:
\XML Publisher Desktop\Template Builder for Word\tmp
I'm not sure why you need to change the preview directory.
You can also use the system-temp-dir property to change the temp folder for run-time (there should be more info on this in the XMLP User's Guide)
\XML Publisher Desktop\Template Builder for Word\config\xdo example.cfg
Brett

How to change default directory of exe file

I have created a VI that reads a template and writes on the template and saves it to a new file. When i created to an exe file, I would like for this exe to be able to be used on any computer. As such, the directory where i will open my template will change on different computers. Hence I am having this problem of how to change my VI such that it will choose this template in a new computer and set it as its default directory.
I understand that in my own computer, I can simple "set current values as default" so that my VI will always open this file from a particular path. But what i need help with is when i put it on another computer where the particular path would definitely be different. I tried using the config file.vi but I could not understand how it is used.
Please assist me in this. Thanks

Hi Aaron,
Micorsoft suggest to use folders like UserAppData to store files for your own programs.
Put your template in there and use GetSystemDir function to get the UserAppData path...
Or you put the template in the program folder or one of it's subfolder (not recommended by MS) and use a relative path to load it...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to change read-directory when using file adapter

Hi, I'm deploying BPEL process to read files from a directory. I want to change the directory where to read dynamically. This can be achieved by using a file header variable. I know how to do this. But, the problem for me is that I can not find a place to assign this file header variable a correct value. The first step in my BPEL process is the receive-step and this has to be the first step. I wanted to place the assign-step before this step but this makes the BPEL process invalid. First step has to be a receive or a pick-step. So, now I have a dilemma! Anyone an advice on this?
Thanks in advance.

Maybe you can use this information :
http://otndnld.oracle.co.jp/document/products/as10g/1012/doc_v3/integrate.1012/B14448-01/html/app_trblshoot.htm
A.3.3 Common User Errors explains something about the fileheader messages

How to change e-mail in Pages and not loose documents

I changed my e-mail address from "aol" to "me". I ccn't open Pages documents without buying Pages again for $9.99 under my new e-mail address. How do I change my address for Pages without incurring a new charge and setup, and I don't want to lose my documents?

Is it for the Apple-ID you have changed the address?? Where did you change the mail address? On the computer? The Pages application per sei doesn't care but maybe it is the MacAppStore that thinks you are a new user. Better ask in the MacAppStore forum.

How to specify the directory in which we want to store the uploaded files

Hello !!
I am using apache commonfile upload for uploading my files.I followed the user guide and tried to run a program,but my problem is I am not able to understand as to how to mention the directory in which the uploaded file will be saved..My code is given below :
package r;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.sql.*;
import java.util.*;
import org.apache.commons.fileupload.*;
import org.apache.commons.fileupload.servlet.*;
import org.apache.commons.fileupload.disk.*;
import org.apache.commons.io.*;
import java.lang.Exception;
public class fileupload extends HttpServlet
     public void doGet(HttpServletRequest request,HttpServletResponse response)throws IOException,ServletException
               // Check that we have a file upload request
              boolean isMultipart = ServletFileUpload.isMultipartContent(request);
             System.out.println(isMultipart);
             if (ServletFileUpload.isMultipartContent(request))
             // Create a factory for disk-based file items
               FileItemFactory factory = new DiskFileItemFactory();
               // Create a new file upload handler
               ServletFileUpload upload = new ServletFileUpload(factory);
               // Parse the request
               try {
                         List items= upload.parseRequest(request);
                         Iterator iter = items.iterator();
                         while (iter.hasNext())
                               FileItem item = (FileItem) iter.next();
                             if (item.isFormField()) //NORMAL FORM FIELD
                             String name = item.getFieldName();
                              String value = item.getString();
                              System.out.println(value);
                              else
                             String fileName = item.getName();
                             System.out.println(fileName);
                                String contentType = item.getContentType();
                              File saveTo = new File("/info/upload_files/myFile.jpeg");
                         try
                                   item.write(saveTo);
                                   System.out.println("File written" );
                         catch(Exception e)
                                     System.out.println("File not written");
                               // InputStream fs= item.getInputStream();
                               fileName = FilenameUtils.getName(fileName);
                                System.out.println(fileName);
                    }//end of try
          catch (Exception e) { }
     public void doPost(HttpServletRequest request,HttpServletResponse response)throws ServletException,IOException
             doGet(request,response);
The problem is that the control doesn't reach the try statement and I get " File not written" on the console because it enters catch everytime..Please tell me how the path to the directory should be given...Rest of the code is working fine

No, the problem is that when an Exception is thrown, you ignore it completely and throw away all the information associated with it. That leaves you to guess at what the problem is. So instead of answering your guess at a good question, I'm going to suggest that in all of your catch blocks you put this code:e.printStackTrace();Then you can look at the output in the log file and see what the problem is. Start from there.

How to stop the rotation i don't want to happenin relationship in mountain lion

how do i stop the rotation i don't want to happening relationship in mountain lion. Everytime I try and work now, the page swipe deal happens, I hate that on my Mac, and then my page all the sudden rotates and I can't figure out how to stop that from happeneing and even make it go back. Happens in photoshop, indesign, etc. help.

nevermind. I found the answer in another place. I have now disabled the gestures. I get gestures for ipads and ipods, but not my regular work mac. Irritating. But got it now and my documnet is back to normal.

I've just lost access to my MobileMe emails and account when trying to change my password - I don't want to lose everything on my account . Help

I've tried to access my mobileme emails on icloud rather than the laptop, but password wasn't recognised, since changing it, I've lost all me emails from my laptop and can't recover my mobilie me account details.
I don't want to set up a different email address via icloud.
Help!
Any ideas?
I also cannot change settings on my email account..... (incoming server), so have suddenly lost all me email capabilty....

Presumably you didn;t use it very often.
June 2011:
iWeb publishing, MobileMe Gallery, and iDisk will all disappear as the company sunsets its current online service in favor of iCloud.
Other MobileMe services—including syncing of Mac Dashboard widgets, keychains, Dock items, and System Preferences—will not be part of iCloud, Apple says. Those syncing services will stop working as soon you migrate from MobileMe to iCloud. In addition, Apple says that while MobileMe members can no longer upgrade to a Family Pack or buy additional MobileMe storage, Family Pack members will be able to transition their accounts to iCloud individually, as long as it’s done before June 30, 2012.
http://www.macworld.com/article/1160728/apple_mobile_me_transition_faq.html
http://en.wikipedia.org/wiki/MobileMe
August 2012:
As of today, visitors to MobileMe.com are no longer given the option to convert their accounts to iCloud or to retrieve old photos and files, with Apple now simply pointing users to iCloud.
http://www.macrumors.com/2012/08/01/apple-officially-ends-mobileme-transition-an d-shuts-down-iwork-com/
And this discussion from February 2012:
https://discussions.apple.com/message/17687380#17687380
ENTERING iCLOUD MAIL SERVER SETTINGS IN SNOW LEOPARD OR LEOPARD
http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html

How to delete a toolbar i don't want?

A toolbar I don't want (Softonic) has found its way onto my Firefox screen. how can I delete it?

Thank you: that was really helpful!

TS4009 How do I remove iCloud? Don't want it at all...

Please someone tell me I can remove iCloud from my iPad?

I tried to remove iCloud but I can't right click to get the "delete" function. Is there another way??
Multiple times each day I get a prompt from iCloud asking me to accept terms and conditions. In fact, I don't accept their terms. I don't want the service. This feels like unfair business practises.
Very annoying.

How to Change $TEMP to project

Hi Gurus,
I saved all the infoobjects in $TEMP. Now I want to change to real project name. How to do that ?
Thanks
Liza

Hi Liza,
You can collect them in the Tranport Connection in RSA1 and then change the package there, or you can also do it for each in RSD1 > menu Extra > Object Directory Entry > InfoObject.
Hope this helps...

How to change temp directory (i don't want c documents & settings) in creative zen to

Similar Messages

Maybe you are looking for