How to change TEXT EDITOR in SMARTFORMS

Dear All,
How to change TEXT EDITOR in SMARTFORMS i am getting editor like Microsoft Word but i want the regular editor.
I am using ECC 6.0 GUI 710
thanks,
RP

Solution By Mr. Eitan Rosenberg is correct.
Program Name: RSCPSETEDITOR
Thanks a lot.
Regards..........

Similar Messages

  • How to change the editor in smartform??

    Hi Guys,
    I am not able to chnge the text editor from full screen to Normal mode.
    How can I change the text editor from full screen to normal mode?
    Harman

    Hi Harman,
    If you are in the full screen mode. Just click 'back' to take you back to the normal mode. The text is automatically saved.
    Do reward points if helpful.

  • How to change text in PDF doc. which is a musical score

    Hello,
    I'm new here, so please excuse me if I do or say something I shouldn't.
    I need to change the words in a musical score because the font is too small. OCR recognition doesn"t work because there are illustrations that are different from images or text... Is there a way to get in there and make the changes I need to do?
    Any help greatly appreciated.

    Thanks for the reply, but I have Adobe Reader 9 Pro. Will it still not 
    work ?
    Le 29 sept. 2011 à 29 sept. 11 - 16:09, Claudio González a écrit :
    Re: How to change text in PDF doc. which is a musical score
    created by Claudio González in Adobe Reader - View the full discussion
    Unfortunately, not with the free Reader.
    Replies to this message go to everyone subscribed to this thread, 
    not directly to the person who posted the message. To post a reply, 
    either reply to this email or visit the message page: [http://forums.adobe.com/message/3944833#3944833
    To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/3944833#3944833
    ]. In the Actions box on the right, click the Stop Email 
    Notifications link.
    Start a new discussion in Adobe Reader by email or at Adobe Forums
    For more information about maintaining your forum email 
    notifications please go to http://forums.adobe.com/message/2936746#2936746

  • How to provide text editor in dialog program

    i have a requirement to enter upto 300 words in a dialog box how to provide text editor in dialog program

    you can use the custom controls for the same
    check this below link may be useful for you.........
    http://help.sap.com/saphelp_nw04/helpdata/en/2a/755b94ca5911d299af5c9604c10e27/content.htm

  • How to change Default editor in Linux for PL/SQL Programming

    Deare friends ,
    I am using oracle 8i (8.1.6) on RedHat Linux 7.2 , But i donot know how to change default editor for modify editor on sql prompt say ex:-
    In winodow
    SQL> ED
    it open nope pad to modify sql and pl/sql statement
    while in linux
    SLQ > ED
    it open one editor but it is not easy to work and i want to change that editor so could you tell me how to chane editor i want to use vi editor .
    if any boyd know reply me on :-
    [email protected]
    or on this forum
    Thanking you in advance
    Piyush Patel

    Either manually do a 'define editor=vi' when you log in through sql*plus, or put that in the glogin.sql in $ORACLEHOME/sqlplus/admin or put that in a login.sql in the directory you run sqlplus from.

  • How to change the language in smartform?

    hi
    how to change the language in smartform?

    Hi,
    U can't change the language in the smartform, the main language of the smartform is the language used to create it (so the language used for SAP log on.
    But u can translate it (by trx SE63) and if u need to print in a new language u have to indicate it when the smartform is called.
    U can transfer the language to be used for the print in the parameter CONTROL_PARAMETERS, like structure SSFCTRLOP, here u can indicate the language in the field LANGU.
    see this..
    Use transaction SE63, after activate your smartform, to translate.
    In the First Page of your Smart Forms click on Global Settings under that click Form Attributes
    now in the Right side screen Go to Subscreen Language Attributes.
    select the Radiobutton Translate To all Languages
    from the Translate subscreen out of three radio buttons.
    rewaards if useful
    regards,
    nazeer

  • How to Change text of link in SRM

    Hi All,
    How to Change text of link in SRM . The Link is in leftside of the screen in webportal.
    I needs to change the text of link ' Shop' , 'Check Status'  and 'Confirm Goods / Services.
    Kindly helpout me.

    Hi Rob,
    Thanks a lot for reply.
    You are right i am suppose to change in BBPGLOBAL.
    But i am not getting where should i change.I am unable to find the parameter in BPGLOBAL.
    Kindly advise me.
    Regards,
    Vasu

  • How to change text in banners

    How to change text in banners

    drag the template in a new project
    then …
    … click on the tiny grey triangle aside 'Banner01', and 'Banner Group'
    this 'unfolds' grouped content
    select/double click 'text here' ...
    type your text

  • How to change text to read right to left-InDesign CC 2014?

    How to change text to read right to left-InDesign CC 2014?

    I have described it here, step by step:
    How do I change text direction adobe indesign?

  • How to change font size in smartform and set layout of smartform

    Dear abapers,
                           I want to change font size in smartform and also set the layout of smart form how can we do this.
                                                 Thank you sir.

    Hi,
    you can do it first you need to goto smartforms tcode there click on radiobutton 'Style'.
    Give any name and click on create. Right sideyou can find character format right click on it and create a node .A pop will raise gve a 2 characterlike z1 or a1 etc click on font tab gve size and font style and click on save and activate. Use this style in your smartform you can apply what ever styles created in styles you can use it in your smartform by that smartstyle name.
    When we create text in output options give your smart style name and click on general attributes . Select your text and apply the style what thse size it should be and what the font style it should be.
    Goto smartforms tcode and select formpainter in application bar set layout according to your requirement.
    Thanks,
    venkat

  • How to change text of logon-popup-window from WAS ?

    hi there,
    i have a link in an email, which links to a application in WAS.
    the user gets an POPUP where he has to enter Username and Passwort.
    Above UserID there is a text "SAP Web Application Server [P02]"   (P02 is my system)
    does anybody know how to CHANGE this text ???
    reg, Martin

    Hi Martin Svik,
        Could you please check the below links :
        http://help.sap.com/saphelp_nw70/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
       and
             http://help.sap.com/saphelp_erp2005vp/helpdata/EN/34/608a44002f41c2a7bcd923758dc03a/content.htm
    Regards,
    S.Manu.

  • How to call text editors in smart forms?

    In my module pool program,I included text editors for three fields.I want that fields in smart forms too.I need to know how these text editors are called in smart forms?

    Hi achu,
             Any text that gets saved has a corresponding entry in table STXH table. It usually has the following parameters : TDOBJECT,TDNAME,TDID and TDSPRAS.
    What you have to do is create a new text element and under general attributes ---> Type  - give Include Text.
    And in the include text you give the above four parameters which correspond to the text you want to display.
    P.S. Do not forget to check the 'No error if no text exists' checkbox.
    Hope this helps.
    Regards,
    Arun

  • How to change  text in ADOBE forms

    Hi ,
      I am unable to change the static text in adobe  can anyone tell me how to change this text.

    Hi,
    Choose the object Palatte. and change the property 'caption' in it .
    thanks
    nidhi

  • How to change text in header of ADF Swing JTable?

    I need to change texts in ADF Swing JTable header.
    any clue?
    thanks
    Branislav

    Hi,
    how do you need to change it? Dynamically or static. If static then - assuming ADF BC is the underlying model - you can set the label hint to override the default column naming. If not using BC, you can set the label in the ADF binding as well.
    Frank

  • Documaker : how to change text by count during overflow

    Hi Experts,
    Please help me...
    I want to change a text in a section by overflow count.
    Summary that I have set are as follows.
    1. FormA (contains Subform1)
    2. Subform1 (contains Subform2)
    3. Subform2
    Subform1 on FormA is setting the overflow with the trigger by the XML.
    Search Mask (counter) : !/xxx/data/Repeats/Repeat
    Subform2 on Subform1 is setting that always repeat 3 times.
    Reference :
    Documaker : How to set the overflow repeated 3 times always.
    I created DAL scripts as follows.
    1) To setgvm CTR.
    ---> Section_HEADER on Subform1 has a field that setting this script.
    2) To return GVM(CTR).
    ---> Section_TEXT on Subform2 has a field that setting this script.
    3) To increment GVM(CTR) by 1.
    ---> Section_TEXT on Subform2 has a field that setting this script.
    This counter has been running without any problems.
    I tried to set as follows.
    4) To change text by GVM(CTR)-1.
    if havegvm('ctr',1)
    varctr = gvm('ctr',1)
    if varctr-1 = 1
    return("A")
    else if varctr-1 = 2
    return("B")
    else
    return("C")
    end
    else
    return("")
    end
    ---> I placed a field (call this "OUTPUT_TEXT") that is set this script in Section_TEXT on Subform2.
    This setting is working.
    BUT, I want to output the Double-byte characters at OUTPUT_TEXT field.
    I can not input the Double-byte characters in DAL Script. (If I input, DMStudio was shut down...)
    By placing 3 text areas in Section_TEXT, I thought of setting the trigger switch by count of overflow, but I could not set.
    By count of overflow, is there any other ways to solve this problem?
    Thanks,

    Sorry, I resolved this...
    I created 3 triggers and set it for 3 text area.
    A trigger is as follows for *1* text area.
    if havegvm('ctr',1)
    varctr = gvm('ctr',1)
    if varctr = *1*
    return(1)
    end
    else
    return(1)
    end
    return(0)
    And, I moved the increasing count field to most right position in Section_TEXT.
    +3) To increment GVM(CTR) by 1.+
    ---> Section_TEXT on Subform2 has a field that setting this script.
    It is able to switch text areas by count.
    Thanks,

Maybe you are looking for

  • Mac Pro won't boot, kernel panic at boot, graphics card failure.

    Yesterday my screen (30" Apple Cinema) started showing symptoms of graphics card failure, jagged lines across the screen. I rebooted my Mac Pro and it was gone. Then it happened again an hour later, this time the machine didn't boot, I get the Apple

  • Can anyone help me identify the cause of this nick (scatch)?

    I discovered something strange this morning.....I found a nick (or scratch) at the very hidden area on the Book. It's on the very bottom side lower left corner of the screen, which seats below the "gap" area, right on top of the lower left corner of

  • Creating a report

    Hi Our requirement in creating a report is as follows : We have "Sales Officer" , "Serial No" , "Revenue" , "Year" columns . The relationship between Sales Officer and Serial No is that : "A Sales Officer can have any number of Serial No's under him

  • How to copy iPhoto keywords from one library to another

    I have over 30 iPhoto Libraries.  Managing them is great using iPhoto Library, but keyword management is awful (if iPLM has a way I haven't found it).  I would like to know how to copy keywords from one library to another.  It's a pain to have to con

  • Report error using landscape style, lines per page errors.

    Hi A Custom report(use character units in designer,11 X 8.5, stadard settings...) developed(reports 2.5 on apps 11), which was working fine previously using standard landscape. The report produces exactly 56 lines physically per page. Now, in applica