How to change the accumulated (uploaded) depreciation

Hi Experts,
At the time of data transfer from legacy system to SAP, we had transferred assets also with their gross values and accumulated depreciation till 29.02.2008. Now while doing so there was errors in some 10 assets where the gross value as well as accumulated depreciation which was uploaded was less. We now have to increase the asset gross value as well as uploaded accumulated depreciation value also. I have tride AS92 but this allows me to change only gross value. But this alone would not solve my problem. I also have to change the accumulated (uploaded) depreciation. If I use transaction ABAA than system would pass and expense entry also which is also not correct as the expenses was already booked and has been uploaded seperately. Thus if I do ABAA then I would be posting double depreciation (expenses). We have still not do "production" for assets. We have also run depreciation for the period 12 i.e. March 2008 and there after for three periods i.e. 1 to 3 for year 2008 for all the assets. Kindly let us know how to get the rectification done in system.

Hello Nikki,
this sounds a bit strange, normally the cumulated depreciation can be edited too. Check oayf whether "calculate accumulated depreciation" is active. If depreciation has been posted: the system carries out correction postings in current period.
If this does not work: Did you use a SAP standardtool for legacy data transfer? What is your  fiscal year, the transfer date and last posted period in the system?
Best regards
  Horst

Similar Messages

  • How to change the storage location in Lightroom 3.6.?

    How to change the storage location in Lightroom 3.6.?
    I use my internal hard drive NTFS of my MacBook Pro  as my storage location of Lightroom 3.6. being installed in Snow Leopard now but the data of my photos get too big now. I have two fast and big external hard drives eSATA now which I want to use for my data/photos. I know how to copy the data from one hard drive to another but I don't know how to change the settings in connection with Lightroom easily. I still want to watch all fotos on my MacBook Pro but don't want to save any fotos on my internal harddrive any more. Isn't it possible to have the programm Lightroom on my internal harddrive but the data on two times on two different extermal hard drives? If I look at Lightroom - settings of catalogue - I see that the internal harddrive location is my storage location now but I my two external harddrives don't appear as folders. Why? How to change that so that the external hard drives appear in Lightroom and I can watch all my fotos immediately (sometimes using external hard drive 1 and sometimes using external hard drive 2)?
    My external hard drives are in HFS+ but I use the software of Paragon so that there shouldn't be any problem to read and write the data (I use also Final Cut Express so my external hard drives are HFS+ and not NTFS).
    I want to impert many data from CDs - should I copy the fotos first to my external hard drive and then import it into Lightroom or is it easier to import the data directly from the CD in Lightroom so that I don't have to name the folders two times?
    I see that I have to sort the fotos from the CDs in new different folders and an used to do that in Finder of my MacBookPro. In Lightroom I don't want have to click each of hundreds of fotos to be able to put it into the right folders ... But how to import only a part of a CDs quickly into the right (newly created) folders?
    Kind regards, Karin

    Would you really leave the names of photos like DSC05271.ARW and DSC05271.jpeg etc.?
    What if I name them f.i. like ...
    2013-09-11_Austria_1_mountain.jpeg
    2013-09-11_Austria_2_mountain.jpeg
    2013-09-11_Austria_3_valley.jpeg
    I would NOT do this. I would not change the file name.
    I would add keywords and other metadata to the photos to identify the content of the photos, and from that point on, I would use keywords and other metdata to search for these photos.
    However, let's look at the big picture. I think there are three different methods of organizing
    Organize via keywords and other metadata, and not via operating system constructs such as file name and folder name
    Organize via operating system constructs such as file name and folder name, and not via keywords and other metadata
    Some combination of 1 and 2
    You can choose any one of the three methods above, the choice is yours. I am a very strong believer that for most people (and it sounds like you are one of those people), method 1 is the best method. However, not everyone agrees.
    There are drawbacks to using file names to identify your photos. One big drawback is that you must type the information into each photo's name, and this is more tedious than if you wanted to assign the keyword "mountain" to the photos, you can assign the keyword to multiple photos at once. Also, if you mis-spell the information in the file name on any photo, you have just made the photo much harder to find; whereas in Lightroom, the keyword can be assigned via a mouse click (so you can't mis-spell it), or by typing the first few letters and Lightroom (auto-fill) will find the correct keyword name. So using keywords is a much simpler way to go.
    .. is this much too complicated to do that in Lightroom or even dangerous to got lost of photos?
    It is very simple to add keywords, as I explained for this case. Create keywords "Austria", "Mountain", "Valley"; then select the desired photos, and then click on the check box next to the keyword name. It is much more complicated in my opinion to rename the photos in this manner.
    There is less danger in doing this via keywords than the danger doing this via file names, because of potential mis-spellings.
    If I spend a lot of time in editing photos (in Lightroom or Photoshop) I don't want that I loose those photos f.i. later if Lightroom won't be the software I use regarding the photos (in 10, 20 years?!)
    Lightroom will OPTIONALLY write your keywords and other metadata to the files (or sidecar files in the case of RAW). Every photographic application I know of (and I'm sure those in the future) can read the keywords and other metadata. So if you ever want to switch to some other software, your keywords and other metadata are available. you can turn this option on via Edit->Catalog Settings->Metadata, check Automatically Write Changes to XMP.
    So I have to create two folders - one with the originals and one with the edited exported photos?
    No, you do not have to create two folders. You don't have to export everything, but if you do, you can put the exports wherever you want, including putting them in the same folder as the originals, with different name.
    Why not edit them in Photoshop and save them in the second folder which I import later in Lightroom? Because it takes longer?
    Wow, you really need to think about: Why are you using Lightroom?
    Could you explain this to me? Why are you using Lightroom?
    If your goal is to edit the photos in Photoshop, and then put them in folders with whatever custom name you want to give them, then what is the benefit of using Lightroom? You can do all of this WITHOUT Lightroom. You keep explaining that your intended goal is to use Photoshop and folders/file names, and this is a goal which AVOIDs all benefits of Lightroom. I can't understand what you think the benefits of using Lightroom are for you.
    It is starting to sound to me like Lightroom is not the right software for you.
    Some people want to see a movie on their TV and are able to watch a DVD (not all!). Flickr seems to be a solution for movies in a big size (many GBs) to share them with friends (?)
    You haven't mentioned this before, and you should check the rules on Flickr regarding how long a video you can upload.

  • HOW TO CHANGE THE USEFUL LIFE FOR MORE ASSETS AT A TIME FOR ASSET CLASS

    Hi All,
    Asset which is under Asset Class Support system-B700. Here every thing is ok but the problem in USE FULL LIFE which is come by default. It must be 4 instead of  5.   So can any body help me out from this how to change the Useful life in that Asset class.  In that Asset Class we have the morethan 200 Assets. It was happend in Prdocution system so now the problem is where i can change the useful life for the asset class either in DEV or PRD.
           Also i want to know the information of How these assets are Uploaded into the system (Lsmw or etc). this is very urgent for me.
    Thanks in Advance,
    Regards,
    Siva.

    Hi Ashok,
         Can i know the reason how it was happend. i mean instead of 4 years the system showing is 5yesrs any reason is there behind that.
    Thanks in Advance.

  • How to change the page Header background colour in a Theme

    Hello,
    I want to know how to change the page header background colour. If you are in the Editor I don't find a property where to change it.
    If you are in the Theme Editor in the header bar I want to change stands <b>Theme Editor</b>. This (in my case blue colored bar) I want to change in another color.

    Hello Radhika,
    thanks for your answer. Where do I find the option for the pageheader in System Administration>Portal Display>Theme Editor ->IView Trays exactly?
    The pageheader is a picture, which must be uploaded for the web dynpro. Why should any webdynpro element in the ivew tray. There is no relationship between these two parts.
    I have not found any option to change the web dynpro pageheader. Could there any extra theme editor for webdynpro?
    Thanks.
    Olaf

  • How to change the page header?

    Hi,
    I just installed and started using Plumtree 6.0 a month ago, and we are still in a trial phase for our company's portal.
    I want to change the default page header to replace Plumtree logo to my company's logo. I thought I can change it in the style sheet, but I didn't find where to change in the cssmill folder. I found an artical in edocs.bea.com saying I can modify the header by using ALI Publisher, but I don't know what's the right way to do it and faster.
    Can someone guide me how to change the page header?
    Thank you. (if this is not the correct forum to post the question, please let me know which forum should I go)

    Depends on what you want to do. Personally, I'd do a header portlet and not touch the Plumtree/BEA logos. They're likely to be overwritten when the product receives updates.
    This may seem like a lot of steps, but really - it goes quickly
    ** Think through what you want to display. If all you want to do is replace the image, but you wan to keep the overall layout style then you can create a simple replacement header
    Step 1 - create a header portlet
    =======================
    If you're using Publisher...
    =====
    * Create a new portlet - choose the Header portlet template
    * Upload your image / change the header in the rich text editor
    If you're not using Publisher
    =====
    * Personally, static HTML will do just fine - create a folder and html file called something like "mybanner/mybanner.htm" on your remote portlet server
    * Plop in an image (you'll want to swipe some adaptive tags for community and page name - can always stick those in later)
    * Create a new remote portlet web service that references this HTML page
    * Create a portlet from the web service - make sure the type is "header"
    Step 2 - turn it on
    =======================
    * Create a new experience definition (or modify default - I usually create a new one so you can move it between environments)
    * In the experience definition's "header / footer" settings area, tell the header to load from the new header portlet you created
    * If you created a custom experience definition, modify your experience rules to load this experience defiintion according to whatever parameters you think make sense (just be careful you don't knock out your login page - we usually use security groups to just say "hey - the user is logged in and is, in fact, a member of this portal - that'll still let your login pages load)
    Done
    May seem like a lot of work, but really it's just a series of simple steps. Advantage here is you can vary things as you see fit and also just feel safe that the next time Plumtree/BEA updates those imageserver files you'll be good to go. From there you can get as fancy schmancy as you like using adaptive tags, etc. Heck - make it a .NET app if you want and do some crazy personalization or something. Embed stock tickers, important news alerts, whatever.
    That help at all?
    Thanks,
    Eric

  • Illustrator File Document Mode How to change the default?

    Does anyone know how to change the default to RGB?
    And, can anyone help explain why, when I put an .eps (logo) into a QUark 8 file and upload as PDF through distiller, the .eps file appears with a partial white box behind it - i need transparency.

    Is it a one bit eps file, that is one color?
    EPS is not a transparent format.
    Have you tried Photoshop Quark 8 I believe supports photoshop files with transparent background. I believe.
    Try exporting it as a psd. I also believe that Quark 8 supports .ai files as well.
    http://8.quark.com/cs_integration/#top
    http://8.quark.com/cs_integration/#top

  • How to change the web server??

    How to change the web server in the details of the mobile application component in the MI webconsole??

    hello irene,
    had your tried checking on the "Use IP instead of host
    name" checkbox?
    to edit your registered application info, go to
    "Upload Mobile Component" tab and click on the Edit icon
    on the left part of the record list which corresponds to
    the application you had just uploaded.
    your application is uploaded to the same host as your
    web console application is running on. if you like to
    point it to a different server where you have your
    archive accessible, you have to change your mcd
    deployment attributes on your middleware. try the ff:
    1)run tcode: mi_mcd
    2)click on Create Mobile Component
    3)Enter Mobile Solution Name and Version
    4)Click on Display MCD
    5)Select Deployment Tab
    6)Click on Edit
    7)Change the values of WEBSERVER and WEBPATH location eg.
      if your archive is located at
      http://myotherserver:80/archive/myapplication.war
      your entry will be:
      WEBSERVER: http://myotherserver:80
      WEBPATH: /archive/myapplication.war
    where you myotherserver is the name of your http host
    server and myapplication.war is the name of your archive.
    the archive directory is just a virtual directory where
    your application archive is.
    you might need to change the port number depending on
    your http server port.
    regards
    jo

  • How to change the properties of waveform graph from time domain to frequency domain?

    Actually, I want my output waveform graph give me the answer in x-component in frequency instead of time after the FFT. My output waveform graph gives the x-components in time instead of frequency. How to change the properties of the waveform graph?

    vasus wrote:
    Hi,
           I amtaking sensor input signals through NI FPGA cRIO-9004. i am analysing this using wave graph. the problem is i am not getting accurate singal.How to decrease the frequency? 
    You are responding to a very old (8 years) thread, be aware that that might not be the best option.
    However, you want to decrease the frequency? or increase?
    What is the code you are running?
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • Software Project - how to change the logo Image

    Hi
    Downloaded and installed sample code - Software Project -
    how to change the logo Image,
    Please do the needfull,

    Hi,
    Go to
    Home>Application Builder>Application 144>Shared Components>Edit Application Definition->Logo
    Logo Type:
    choose Image
    type the path of your image in the text box.
    you have to upload your image inside Shared Components>images
    use
    #APP_IMAGES#YOURIMAGENAME.GIF
    thanks
    Mark Wyatt
    Edited by: Websoft on Oct 8, 2009 12:10 AM

  • How will effect the tax on depreciation ?

    Hi Sap Gurus,
    How will effect the tax on depreciation ?
    what is the entry...
    Thanks
    Ramakanth

    Hi,
    Treatment of tax depreciation depends on how your client wants it.
    Most client don't want tax depreciation to post to general ledger. Hence in the configuration, using transaction code OADX, the setting of tax depreciation is set to zero. This way real time tax depreciation is not posted to GL.
    Depreciation keys specific to cater tax depreciation are either created and defaulted to asset classes where tax depreciation is present. Also useful life of an asset is changed in tax depreciation area. This ensures tax depreciation to be calculated normally while posting depreciation. Later on reports can be executed to get the value of tax depreciation during the given period.
    regards
    Pawan

  • How to change the OraSSO login link in webcache/load balance

    Hi
    we have 10gAsR1 installed as a Portal instance. We have 6-server
    load balancer => webcache as loadbalancer (listening port 80)
    Wb ch1 and wb ch2 => webcache (listening port 7777)
    portal1 and portal2 => Portal listening 7778
    infra =>Infrastruture with repository Portal/Oracle SSO (listening 7777)
    This set up is working fine for our intranet setup, now we need to open this for couple of external clients. Well initially we need to open on the load balancer server on port 80 for external team to access, it works fine when we make it publc access.
    Now when we need to make it SSO (siteminder) enables, when users click on login link it first goes oracle sso then it internally redirects the page to site minder sso.
    Well, I have noted that the sso server details are mentioned in global setting sso/oid details. Since we need to open this for external client we have to add a DNS entry for this so that we can allow its access over firewall..
    Now I have made DNS name change at my infrserver level, now I need to update the change at the load balancer server (where wheb chache is running).
    Any one know how to chang the URL at load balancer.
    I am struck at this point please suggest how should i proceed..
    Thanks,

    Extract from Personalization Guide - Page Footer - Personalization Considerations
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

  • How to change the privacy statement link url

    I looked into the previous threads , could not find the answer to "Changing the privacy statement url to clients privacy statement url".
    I am talking about the privacy statement URL in the page that user see it as soon as user logs into the e-business suite.
    I have read the previous theads and developers guide regading how to show or hide this autofooter thing. but could not find any thing about how to change the one in the login page.I even looked ino personalization but could not find a place to change this url. please HELP.
    Another question is " is it ok to show privacy statement in just the first page and hide it in rest of the application pages?"
    Thanks
    karan

    Extract from Personalization Guide - Page Footer - Personalization Considerations
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

  • How to change the default apex port

    hi,
    i am installed apex4.0 in EBS R12 DB with HTTP Server method. my apex is running from application server 10g and default port is 7777.
    URl: http://hostname:7777/pls/apex
    My EBS R12 running on http://hostname:8007.
    is it possible to change the apex port to EBS Apache port(8007) in R12 and finally i want to change above URL like this
    Before change : http://hostname:7777/pls/apex
    After Change : http://hostname:8007/pls/apex
    Thanks in advanace....

    How to Change the Default SSH Port from Terminal ?
    now showing default SSH Port 22 i need change it pls help me how can do

  • How to change the default Path of Prompt Played by MicroApp

    Hi
    I need to store all the Self Service application prompts in dedicated Media Server. I can modify location of all the Media files by passing the related URL form CVP application, however I need to know how to change the default location of Prompt file played by Play Media Microapplication in ICM Scripting.
    Currently the default location taken by Play Media Micro App is the Media _Server.variable path set for VXML Server location while I have a separate Media Server.
    Please advice how we can customize the MicroApp Media path.
    regards
    Kapil Kumar

    Hi Kapil,
    Try this in your ICM script, define set variables i.e.
    set Media Server= ip address of media server
    set Locale = en-us
    set input Type = DTMF only
    set App Media Lib = " you new location i.e. test "
    So, the application path will be
    http://media server ip address/en-us/test
    hope this helps.
    Cheers

  • How to change the default SSH port on Cat 6500 WS-SUP720-3B

    I have been net searching this question and I find answers relative to other Cisco products but not for the 6500 series. We are running
    entservicesk9_wan-mz.122-18.SXF17a.bin and would like to know how to change the default SSH listening port..
    Thanks in advance..

    Hi Neil,
    Normally this is achieved via the "ip ssh port rotary " but unfortunately, this command is not implemented on your platform so ssh will only work on port 22.
    Regards,
    Nicolas

Maybe you are looking for