How to change the Amount in LC(DMBTR) in F-02

Usually, when we create accounting document though F-02. the Amount in LC(bseg-DMBTR) is create base on the amount(bseg-WRBTR) and the local currency .
Now I want to change this field's value, I want to know in which program create I can change the Amount in LC(bseg-dmbtr) , or can we change it in Substitution (ZRGGBS000) ?

Hi,
as per SAP standard it is no possible once document has posted
If you want to change amount LC or DC
Please cancel/reverse document in FB08 if it is open item
if it is Cleared item means use T code - FBRA
and post new document correct LC amount
Thanking you
Regards
mahesh

Similar Messages

How to change the amount of Vendor Line Item in FB60

Hi all,
I want to post the invoice in SAP with FB60. The journal is as follow:
Dr. Expense    1000 USD
Dr. VAT-Input    100 USD
      Cr. Account Payable     1100 USD
But the problem, the amount of Account payable is 1000 USD. Because I want to fill the amount in vendor line item (FB60) with the original expense (1000 USD).
I want to ask, there is any configuration in SAP to change the amount in vendor line item which it could be the same with amount of the original expense.
If you ever have same problems, plase share with me
Thanks,
John

Hi,
Thanks for your reply. The result of posting invoice that I want is as follow:
Dr. Expense    1000 USD
Dr. Vat - Input    100 USD
Cr. Account Payable   1100 USD
When posting invoices in FB60, there is a filed "amount vendor line item" at the top. Usually the field is filled with amount vendor 1100 USD, but I want to fill it with the expense amount (1000 USD). Which can be show the account payable 1100 USD.
Is there any configuration to change the field "amount vendor line item" ?
Thanks,

How to change the amount of shared RAM

Dear Sir,
I am using Lenovo 3000 C100. When I check the system properties -> general tab, I see that i have 248 MB of RAM available. I suppose that the total RAM might be 256 MB.
upon checking the size of my video RAM, in the plug and play monitor -> adapter, I see the memory size to be 128 MB
Is this memory coming from my 256 MB RAM chip? If so, how can I decrease it to a desired level since I have not been able to see any option which does that.
please help.
Solved!
Go to Solution.

I guess 256mb is the RAM, and the display adapter-video card is 128mb, both are different. it's OK.
3000 N100-0768DKU
XP Home 5.01.2600 SP2
Ubuntu 8.04(hardy)

HT2105 Are there limits what you can spend on apps and how to change the amount?

Are there limits on spending on apps if so how to increase

When it tells you to contact itunes support, you will have to contact them in order to correct the issue.
You can click Contact Us at the bottom of this page then click Contact Itunes Support

HOW DO I CHANGE THE AMOUNT OF TRACKS I CAN HOLD, i already knw how2 add em

i posted before on the same thing but i wasnt as clear, i wanna know how to change the amount of audio tracks i can hold, not how to add them, i know how to add more, just click create multiple in the track menu in the arrangement window. i cant hold more then 16 audio tracks cuz everyone after is blank with out the option to record. how do i change it so that i have more then 16 audio tracks, each with the option to record on them. please help!
p.s. gorge dude i didnt see any drivers window after preferences, lost am i ><

o nevermind, jorge was right, in the drivers window u can change this, i found it when : go to preferences, go to audio, look at the lil tabs under the bigger icons, right under the audio icon u see drivers, click it and u see the max number of tracks thingy, thanks alot dude

How to change the Timestamp In a program

Hi,
We faced a problem today, Some of the critical jobs from a source system are going to short Dump. Unfortunately we couldn't find any lockwaits, deadlocks and any delay in SM37. After analyzing, we came to know that, SAP trace indicates failure occured during program /GLB/RGTCSR_RC_INV execution :
B *** ERROR => DISTRIBUTED_TA_FAILED:
The timestamp for the execution of the program has been set as "20.070.801.000.000", that does mean it will try to retrieve all values after the date 01.08.2007 and the time 00:00:00. Now checking on the code we can see there is a logic written which retrieves the values from the table /GLB/RGTT_CS_RC, checking on the Goods Movement status (wbsta) , timestamp and document number (VBELN_SO) if any. For this case VBELN_SO is blank and vbsta is equal to space (Not Relevant). This retrieval helped to logic to retrieve 706706 document and items from the table. This amount of data is huge and we would like to request BW team to run the program with a smaller timestamp to avoid any inconsistencies and also to avoid the dumps which can occur when we try to play with this huge entries.
Checking on the code, two similar selects have been written on the same table /GLB/RGTT_CS_RC, firstly to select all the document numbers relevant to the timestamp and wbsta value and secondly to check "Get records that may have already been used", depending on the document number and item numbers. But as we are doing a select * it will automatically select VBELN_SO as well as POSNR_SO. Hence, the second select from the same table is irrelevant and it will only effect the performance of the system, in the worst case it will terminate the program with this huge amount of entries. Hence, this logic has to be combined to one single select for which the first select statement is enough. Playing with a huge amount of data 706706, and retrieving from the same table twice can surely result in a short dump. Also there are couple of loops has been done on the same table which reduces the performance too.
Possible solution looks like we need to reduce the time stamp and run it,
can some one tell me how to change the time stamp in a program???

First check the connection with the source system. If its ok then replicate the datasource and activate. Then try with running job.
Time stamp error usually happens when source system in BI and r/3 side differs.

How to change the Profit Center in Sales Order

Hi Gurus,
Previously they setted the profit center (YB999) in sales order, now i want to change the profit center and need to give the amount into this profit center 100500.
So, could you guide me how to change the profit center in sales order.
Thank you for your replies.....
Thanks & Regards,
Chandrababu.B
Edited by: Chandrababu Naidu on May 25, 2011 12:44 PM

Hi
If this SO is processed partially - i.e. transactions happened - You cant change it
You can use ABAP and change it in Debug mode, but not advisable... Better to short close the SO and open a new SO for Balance qty
br, Ajay M
Edited by: Ajay Maheshwari on May 25, 2011 5:10 PM

I modified the budget categories on the numbers template so now the transaction tab does not communicate with the budget tab. I figured out how to change the drop down options but how do I get it to reflect on my budget sheet? Please help.

If you are familar with the Numbers Budget Template it has two tabs 'Budget' and 'Transactions'. If you use the template as it is designed when you input expenses on the transaction tab it will automatically add that amount into the selected category on the budget tab. I have madified my budget tab to reflect the caegories that I need, which included adding several to the template. I also added to the table so it reflects my income and expenses so I can track where I am at with a glance. Since I did this, I can't get my transactions tab to communicate with the budget tab. I figured out how to change the options in the drop down box for category but I con't figure out how to get it to reflect onto my budget tab. I'm sure that it is an easy fix, however, I am just not well versed in Numbers. I appreciate your time in helping me with this issue.
Respectfully,
Jon

My guess is that while you added catetories to your Budget Sheet by adding new lines and filling in the category column, you didn't also add the formulas to these new budget lines.
The proper way to add those lines would have been to select a cell in the line just above where you want to add a line and type Option/Alt-DownArrow. This would have copied the formulas into the new line. Maybe you did this, and maybe not. You didn't give details on how you added the lines.
Select C2 and D2 and Command-C to copy them to the Clipboard.
Select all the cells of Columns C and D except for the top and bottom rows and Command-V to Paste.
If I have properly guessed the problem, you should be in business. This assumes that your Categories are exaclty the same as the entries in your Pop-up menus. Spelling counts, as does case.
Jerry

Orders already invoiced status can still change the amount/qty order

HI Experts,
How to configure the amount/quantity of Sales Order should not be able to change the amount once the invoice is created?
Thanks a lot!

Dear Cecilio,
this is possible with the user exit modification stating that
if VA02 then make the order quantity and amount fields disable.
user exit : FORM USEREXIT_FIELD_MODIFICATION
PROGRAM : MV45AFZZ.
IF sy-tcode EQ 'VA02'.
IF vbak-vkorg EQ 'YOUR SALES ORGNS'.
screen-input = 0.
Regards,
balajia

I want to change the amount in condition sheet using bapi_po_change

hi experts:
i want to use the bapi_po_change to change the amount in condition sheet in me23n.
the parameter i set is below:
DATA:
lt_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE, "返回内容
lt_poheader like bapimepoheader,
lt_poheaderx like bapimepoheaderx,
ls_pocondheader like BAPIMEPOCONDHEADER occurs 0 with header line,
ls_pocondheaderx like BAPIMEPOCONDHEADERX occurs 0 with header line,
ls_pocond like BAPIMEPOCOND occurs 0 with header line,
ls_pocondx like BAPIMEPOCONDX occurs 0 with header line,
lt_POITEM LIKE BAPIMEPOITEM OCCURS 0 WITH HEADER LINE,"
lt_POITEMx LIKE BAPIMEPOITEMx OCCURS 0 WITH HEADER LINE,
l_flag(1),
g_text(50) TYPE c.
CLEAR: l_flag.
lt_POITEM-po_item = '00020'.
lt_poitem-NET_PRICE = '15.10'.
APPEND lt_POITEM.
CLEAR lt_POITEM.
lt_POITEMx-po_item = '00020'.
lt_POITEMx-po_itemx = 'X'.
lt_POITEMx-NET_PRICE = 'X'.
APPEND lt_POITEMx.
CLEAR lt_POITEMx.
ls_pocond-condition_no = '0000006887'.
ls_pocond-itm_number = '000001'.
append ls_pocond.
ls_pocondx-condition_no = '0000006887'.
ls_pocondx-itm_number = '000001'.
append ls_pocondx.
CALL FUNCTION 'BAPI_PO_CHANGE'
EXPORTING
purchaseorder = '4500000002'
TABLES
return = lt_return
POITEM = lt_POITEM
POITEMx = lt_POITEMx
POCOND = ls_pocond
POCONDX = ls_pocondx.
but it doesn't work ,it goes to change the net price, how should i set the parameter? hunger for ur advice!!

Hi,
are you using BAPI_TRANSACTION_COMMIT or a COMMIT WORK after the bapi call?
Have a look at the code of fm ME_CCP_TPO_PRICE_CHANGE maybe that can help.
Best regards
Edited by: pablo casamayor on Jun 6, 2008 10:15 AM

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

This gets confusing, you have two Macs with different issues and two pedals with different issues? First let's sort out what's what. So, do the issues come from the pedals or from the Mac software? To find out, simply switch the pedals and note their behaviour. No change: it's the software, change: it's the pedals (imho the most likely scenario).
Second, what kind of pedals are they? Can you name the type of pedal too? The Yamaha what and the Mgear which?
Third, with the 4 fold data problem, are the doubled events simultaneous, or a few ticks apart, or more?
Also, you have no MIDI keyboard? Are the pedals both "standalone"?
I think you have to sort this problem at its' source, which are the pedals. You could, if push really comes to shove, perhaps create some sort of ingeneous/elaborate transformer setup in the environment to filter the extra messages, although with the 4/4 sustain events that may not even be possible. With the "stepped" events you could set up a filter to just block all events with values 20-110 or so.
But much better would be to configure the pedal(s) correctly.

How to change the number of mails displayed

I have two accounts on my iTouch..I know how to change the number of mails displayed for the exchanged account (being the second-added email account)...But I don't know how to change it on my account email... I only want the recent like 20 messages to be displayed... But after I was reading through my email (meaning that pretty much all my emails were downloaded).. I couldn't decrease the number of emails displayed on my account email anymore....

Settings>Mail, contacts, calendars>Mail>Show Recent Messages. The least amount that you can set it for is 50 messages.

How to change the OraSSO login link in webcache/load balance

Hi
we have 10gAsR1 installed as a Portal instance. We have 6-server
load balancer => webcache as loadbalancer (listening port 80)
Wb ch1 and wb ch2 => webcache (listening port 7777)
portal1 and portal2 => Portal listening 7778
infra =>Infrastruture with repository Portal/Oracle SSO (listening 7777)
This set up is working fine for our intranet setup, now we need to open this for couple of external clients. Well initially we need to open on the load balancer server on port 80 for external team to access, it works fine when we make it publc access.
Now when we need to make it SSO (siteminder) enables, when users click on login link it first goes oracle sso then it internally redirects the page to site minder sso.
Well, I have noted that the sso server details are mentioned in global setting sso/oid details. Since we need to open this for external client we have to add a DNS entry for this so that we can allow its access over firewall..
Now I have made DNS name change at my infrserver level, now I need to update the change at the load balancer server (where wheb chache is running).
Any one know how to chang the URL at load balancer.
I am struck at this point please suggest how should i proceed..
Thanks,

Extract from Personalization Guide - Page Footer - Personalization Considerations
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

How to change the privacy statement link url

I looked into the previous threads , could not find the answer to "Changing the privacy statement url to clients privacy statement url".
I am talking about the privacy statement URL in the page that user see it as soon as user logs into the e-business suite.
I have read the previous theads and developers guide regading how to show or hide this autofooter thing. but could not find any thing about how to change the one in the login page.I even looked ino personalization but could not find a place to change this url. please HELP.
Another question is " is it ok to show privacy statement in just the first page and hide it in rest of the application pages?"
Thanks
karan

Extract from Personalization Guide - Page Footer - Personalization Considerations
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

How to change the default apex port

hi,
i am installed apex4.0 in EBS R12 DB with HTTP Server method. my apex is running from application server 10g and default port is 7777.
URl: http://hostname:7777/pls/apex
My EBS R12 running on http://hostname:8007.
is it possible to change the apex port to EBS Apache port(8007) in R12 and finally i want to change above URL like this
Before change : http://hostname:7777/pls/apex
After Change : http://hostname:8007/pls/apex
Thanks in advanace....

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How to change the Amount in LC(DMBTR) in F-02

Similar Messages

Maybe you are looking for