How to change the colours of a vector patterned image?
Hello ,
I downloaded a vector , in both jpg and gif format today. I saved it down in Illustrator as a new swatch.
I was wondering if anyone knows if it is possible to change the colours in that vector/swatch?
As its jpg or gif , i am not sure whether it can be done.
Your help is much appreciated.
Lola
Just by way of hopefully-helpful general info:
I am not familiar with .eps....
Both EPS (Encapsulated PostScript) and PDF (Portable Document Format) are "meta formats." They are really not all that mysterous. Just think of them as mere "containers"--locked boxes which can contain any combination of individual vector-based, raster-based, and/or text-based objects. So merely saying you have an EPS or PDF file doesn't really tell anyone what you're actually dealing with, because saying that alone doesn't tell what kind of graphic objects the file actually contains.
Both EPS and PDF exist to "pass through" or "pass between" various softwares and/or devices graphic information which would not likely be "understood" if delivered in the native code of the program(s) which created the actual graphic objects.
Illustrator (like other similar drawing programs) is originally and primarily a PostScript-generating program for print. Both EPS and PDF are deeply related to PostScript. So programs like Illustrator can "unlock" most EPS and PDF files to get at the actual, individual objects they contain.
As already briefly mentioned, JPEG (Joint Photography Expert Group) and GIF (Graphics Interchange Format) are entirely raster-based image formats. They are just different ways to encode a single raster image in a compressed file. Both of them use "lossy" compression algorithms--to minimize the file size, they actually throw away data detail when they can. So they most often actually degrade the original (in what is hopefully "negligible" ways). So think of a JPEG (often shortened to JPG) or GIF as a single raster-based image object. A JPEG or a GIF are just two of the kinds of objects which may or may not be contained within an EPS or a PDF.
So you didn't receive "...a vector , in both jpg and gif format" because neither JPEG nor GIF can contain vector-based paths. JPEG or GIF is often used to serve as a mere rough preview of the contents of an EPS or PDF. In fact, EPS files very often contain a JPEG or TIFF (another raster-based image format) image to serve as a crude substitute preview for programs or devices which otherwise would be unable to display the real contents at all.
I downloaded a vector...
Saying "a vector" is giveaway beginner language. You didn't "dowload a vector." 'A vector' is 'a direction.' You downloaded a vector-based graphics file (but not as a GIF or a JPEG). Vector-based graphics are graphics consisting of mathematically-described curves nowadays most commonly (but not always) defined as cubic or quadratic Bezier curves. Cubic Bezier curves are the kind created by most programs like Illustrator.
So what you downloaded is typical of a stock-artwork provider:
The actual full-fidelity graphics content (objects) in EPS and PDF "containers."
Separate "dumbed down" raster images of the content in JPEG and GIF formats; usually provided so you can use them as temporary place holders or preview references.
JET
Similar Messages
-
How to change the colour of chart in WAD.
Hi,
I have problem with web report. The web report with bar charts used to show with different colours earlier. Now when I execute the web report, the chart displays in single colour (All the rectangular bars in the charts are displayed in single colour say for example red). customer would like to see the chart with different colours. Please put some lights on it how to change the colour of chart in the report.
Thanks,
Sravan.Hi Krish,
I have followed the steps which you suggested, but I am unable to see the changes when I execute the web report.
I could able to see the colour changes to the bars in the chart in the preview (i.e when I select the series 1 and change the colour for series 1 under Area properties). Like that I have done for all the 5 series, then I have clicked on Complete button, saved the web template and executed it, and I could able to see the changes in the preview but not in the report after execution.
I have two charts in my case, one is <b>Job function</b> chart and the other is <b>Job type</b> chart. The Job function chart is displaying with different colours from the begining, but the job type chart is displays all the columns in RED colour.
Is there any setting I need to do after selecting the colour at the series level.
Please correctt me if I am worng in doing the procedure.
Please update me how to do it...It is usefull if you can come back to me ASAP .
Thanks,
Saravanan.
Message was edited by:
SARAVANAN PAYANI
Message was edited by:
SARAVANAN PAYANI
Message was edited by:
SARAVANAN PAYANI -
How to change the colours of squares in ical
How do I change the colours of squares (that show days) in ical?
How do I change the colours of squares (that show days) in ical?
-
How to change the colour of text property in Radio button?
Hello All,
I am having some radio buttons in my application. i want to change the colour of text property by default it is black.
Could any one please suggest me how to do it?
Thanks in advance.Currently you cannot, it is a known (and hopefully reported, and at least addressed for next version) bug (or limitation, as they rushed to get the components out before JavaOne...).
People reported they just put an empty text and put a label beside the component. Ugly workaround (bad when the component will be complete) but if it works... :-) -
How to change the colour of selected item in itemrenderer
Hello guys
please tell me how to change the selected image( which is in itemrender of tilelist).so that the colour sholud be shown within image not its outer part due to renderer.
Thanks in Advance
vineet sharmaCurrently you cannot, it is a known (and hopefully reported, and at least addressed for next version) bug (or limitation, as they rushed to get the components out before JavaOne...).
People reported they just put an empty text and put a label beside the component. Ugly workaround (bad when the component will be complete) but if it works... :-) -
How to change the colour of background
Hi,
I'm quite new to Oracle Reports.
Once I've created a report on a table by using the Wizard, where do I have to change the colour of the columns of the report? Or of the background as well?
Thanks!Mark1970 wrote:
Hi,
I'm quite new to Oracle Reports.
Once I've created a report on a table by using the Wizard, where do I have to change the colour of the columns of the report? Or of the background as well?
Thanks!Welcome :)
Check left side color plate at Layout Mode.. (left bottom)
Hope this helps
Edited by: HamidHelal on Apr 5, 2012 9:23 PM -
Changing the colour space on a jpeg image for better quality when uploading to a website
When uploading my images to my website the quality and colour of the photographs aren't the same. They lose quality etc. I was told to change the colour space to sRGB or something to make it better. No idea how this works and I'm now not sure what settings to have photoshop on, I don't want to edit my images and then for them to be edited wrongly.
Really need some help, much appreciated.File > Save for Web. Use the 4-up panel to choose the best quality image with the smallest file size to save on bandwidth. You can test with sRGB enabled. Click on screenshot.
Nancy O. -
How to change the colour of a table cell boder?
I have just changed from Dreamweaver MX t CS5 and cannot find how to add a colour to the borders of a table and table cells. In the old MX it was easy just selected the colour for border in properties but in CS5 this option is not availble. Have tried formatting with CSS but this only colurs the outer boarder can anyone help?
Not sure what you mean by a custom class would it be possible to give me an example?
-
How to change the colour of row in ALV depending on condition?
Hi All,
I want to change the color(from green to red )of perticular row in ALV depending on certain conditions like if amount in some field in row is more than 5000.
Can anybody please tell me how to do that?
expecting early reply.
Thanks in advance,
Rohini.Hi
Check this sample report
*& Report ZALVCOLOR *
REPORT ZALVCOLOR .
DATA : mara TYPE mara. " General Material Data
TYPE-POOLS: slis. " ALV Global types
FIELD-SYMBOLS :
<data> TYPE table. " Data to display
SELECT-OPTIONS :
s_matnr FOR mara-matnr. " Material number
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max. "#EC NEEDED
PARAMETERS p_max(2) TYPE n DEFAULT '50' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
INITIALIZATION.
v_1 = 'Maximum of lines to display'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
* Form f_read_data
FORM f_read_data.
FIELD-SYMBOLS :
<field> TYPE ANY,
<field2> TYPE ANY,
<header> TYPE ANY,
<header2> TYPE ANY,
<lt_data> TYPE table. " Data read from DB
DATA:
lp_struct TYPE REF TO data,
lp_struct2 TYPE REF TO data,
lp_table TYPE REF TO data, " Pointer to dynamic table
lp_table2 TYPE REF TO data, " Pointer to dynamic table
ls_lvc_cat TYPE lvc_s_fcat,
lt_lvc_cat TYPE lvc_t_fcat. " Field catalog
* First column
CLEAR ls_lvc_cat.
ls_lvc_cat-fieldname = 'MATNR'.
ls_lvc_cat-ref_table = 'MARA'.
APPEND ls_lvc_cat TO lt_lvc_cat.
* 2nd column
CLEAR ls_lvc_cat.
ls_lvc_cat-fieldname = 'MAKTX'.
ls_lvc_cat-ref_table = 'MAKT'.
APPEND ls_lvc_cat TO lt_lvc_cat.
* 3rd column
CLEAR ls_lvc_cat.
ls_lvc_cat-fieldname = 'MATKL'.
ls_lvc_cat-ref_table = 'MARA'.
APPEND ls_lvc_cat TO lt_lvc_cat.
* Create 1st internal table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING it_fieldcatalog = lt_lvc_cat
IMPORTING ep_table = lp_table.
ASSIGN lp_table->* TO <lt_data>.
* Read data into 1st internal table
SELECT matnr maktx matkl
INTO TABLE <lt_data>
FROM v_matnr
UP TO p_max ROWS
WHERE matnr IN s_matnr.
* Create 2nd internal table
* Checkbox
CLEAR ls_lvc_cat.
ls_lvc_cat-fieldname = 'CHECKBOX'.
APPEND ls_lvc_cat TO lt_lvc_cat.
* Table color
CLEAR ls_lvc_cat.
ls_lvc_cat-fieldname = 'TABCOLOR'.
ls_lvc_cat-ref_table = 'CALENDAR_TYPE'.
ls_lvc_cat-ref_field = 'COLTAB'.
APPEND ls_lvc_cat TO lt_lvc_cat.
* Create 2nd internal table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING it_fieldcatalog = lt_lvc_cat
IMPORTING ep_table = lp_table2.
ASSIGN lp_table2->* TO <data>.
* Create structure = structure of the 1st internal table
CREATE DATA lp_struct LIKE LINE OF <lt_data>.
ASSIGN lp_struct->* TO <header>.
* Create structure = structure of the 2nd internal table
CREATE DATA lp_struct2 LIKE LINE OF <data>.
ASSIGN lp_struct2->* TO <header2>.
* Move data from 1st internal table --> 2nd internal table
LOOP AT <lt_data> ASSIGNING <header>.
DESCRIBE TABLE lt_lvc_cat.
CLEAR <header2>.
* Fill the internal to display <data>
DO sy-tfill TIMES.
READ TABLE lt_lvc_cat INTO ls_lvc_cat INDEX sy-index.
* For each field of lt_lvc_cat.
ASSIGN COMPONENT ls_lvc_cat-fieldname OF STRUCTURE <header>
TO <field>.
IF sy-subrc NE 0. EXIT .ENDIF.
ASSIGN COMPONENT ls_lvc_cat-fieldname OF STRUCTURE <header2>
TO <field2>.
IF sy-subrc NE 0. EXIT .ENDIF.
<field2> = <field>.
ENDDO.
* Modify color
ASSIGN COMPONENT 'TABCOLOR' OF STRUCTURE <header2>
TO <field2>.
IF sy-subrc EQ 0.
PERFORM f_modify_color USING 'MAKTX' <field2>.
PERFORM f_modify_color USING 'MATKL' <field2>.
ENDIF.
APPEND <header2> TO <data> .
ENDLOOP.
ENDFORM. " f_read_data
* Form F_DISPLAY_DATA
FORM f_display_data.
* Macro definition
DEFINE m_sort.
add 1 to ls_sort-spos.
ls_sort-fieldname = &1.
ls_sort-down = 'X'.
append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
ls_layout TYPE slis_layout_alv,
lt_sort TYPE slis_t_sortinfo_alv,
ls_sort TYPE slis_sortinfo_alv,
ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat TYPE slis_t_fieldcat_alv. " Field catalog
* Build Fieldcatalog - First column
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'MATNR'.
ls_fieldcat-ref_tabname = 'MARA'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO lt_fieldcat.
* Build Fieldcatalog - 2nd column
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'MAKTX'.
ls_fieldcat-ref_tabname = 'MAKT'.
APPEND ls_fieldcat TO lt_fieldcat.
* Build Fieldcatalog - 3rd column
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'MATKL'.
ls_fieldcat-ref_tabname = 'MARA'.
APPEND ls_fieldcat TO lt_fieldcat.
* Layout
ls_layout-zebra = 'X'.
ls_layout-colwidth_optimize = 'X'.
ls_layout-box_fieldname = 'CHECKBOX'.
ls_layout-coltab_fieldname = 'TABCOLOR'.
m_sort 'MATNR'. " Sort by creation date
* Display data
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
is_layout = ls_layout
it_fieldcat = lt_fieldcat
it_sort = lt_sort
TABLES
t_outtab = <data>.
ENDFORM. " F_DISPLAY_DATA
* Form F_modify_color
FORM f_modify_color USING u_fieldname TYPE lvc_fname
ut_tabcolor TYPE table.
DATA:
l_rnd_value TYPE datatype-integer2,
ls_tabcolor TYPE lvc_s_scol.
* Random value
CALL FUNCTION 'RANDOM_I2'
EXPORTING
rnd_min = 0
rnd_max = 3
IMPORTING
rnd_value = l_rnd_value.
CLEAR ls_tabcolor.
ls_tabcolor-fname = u_fieldname.
CASE l_rnd_value.
WHEN 0.
ls_tabcolor-color-col = 1. " Blue.
ls_tabcolor-color-int = 0.
ls_tabcolor-color-inv = 0.
WHEN 1.
ls_tabcolor-color-col = 3. " Yellow.
ls_tabcolor-color-int = 0.
ls_tabcolor-color-inv = 0.
WHEN 2.
ls_tabcolor-color-col = 5. " Green.
ls_tabcolor-color-int = 0.
ls_tabcolor-color-inv = 0.
WHEN 3.
ls_tabcolor-color-col = 6. " Red.
ls_tabcolor-color-int = 0.
ls_tabcolor-color-inv = 0.
ENDCASE.
INSERT ls_tabcolor INTO TABLE ut_tabcolor.
ENDFORM. " F_MODIFY_COLOR
Reward all helpfull answers
Regards
Pavan -
How to change the colour of Background in TGA sequence with Alpha
We are going to be loading an animated name key ,created in Motion, into our clarity system for live broadcast. To do so I need to export the animated name key as a TGA sequence. Unfortunately the background for the produced files are black and leave a dark halo when the alpha channel is applied. Is there a way to change the background colour of the produced TGA files to white?
Use the rectangle shape tool. Draw a rectangle over the entire frame. In the shape tab, color it whatever you want. Export your TGA sequence.
Andy
PS: But if you place a colored bkg in your motion project that you will effectively have no alpha channel. Are they referencing the TGA's alpha? -
How to change the colour of the table cell editor on some condition?
Hi all,
I have a requirment acco which i need to make the colour of the tableceleditor ias RED and font color white when the data in that is < 0.please tell me how is this possible and its urgent..
regards
SharanIf you are using release NW04 and have a TextView as table cell editor, you can do this:
Add a calculated attribute "Color" of DDIC type "com.sap.ide.webdynpro.uielementdefinitions.TextViewSemanticColor" under the data source node of the table.
Bind the "semanticColor" of the cell editor to this context attribute.
Implement the get-method for the calc. attribute like this
WDTextViewSemanticColor get<DataSourceNode>Color(I<DataSourceNode>Element element)
return element.getValue() < 0 ? WDTextViewSemanticColor.NEGATIVE : WDTextViewSemanticColor.STANDARD;
Armin -
How to changed the colour schemes of the oracle 10g application server
dear all
I want to change the background colour of my system. pls let me know the way of doing that.
I was try out the by changing the parameters of the formsweb file. but I dnt know hoew to put a requered colour there. pls give me a solution for this thing.
thanks and regards
buddhikethe Types of lookandfeel : Generic and Oracle
lookandfeel=oracle
And ... colorScheme values can be (Only for Oracle lookandfeel):
teal
titanium
red
khaki
blue
olive
purple
blaf
Hope this helps -
How to change the colour for round blue circle pin
I am using bing map on asp.net application, the default pin icon 'pin55light' which is in blue color is shown on the map. I am wondering if there is any way to change it to orange and make a size bit bigger?
Here is the code, for pin2 i am using custom icon but pin1 is having default icon. Is there any quick way to change the back color of default blue circle icon?
function themesModuleLoaded() {
map = new Microsoft.Maps.Map(document.getElementById('myMap'), {
credentials: BingMapKey,
zoom: 7,
center: new Microsoft.Maps.Location(546, 787),
theme: new Microsoft.Maps.Themes.BingTheme()
dataLayer = new Microsoft.Maps.EntityCollection();
map.entities.push(dataLayer);
var infoboxLayer = new Microsoft.Maps.EntityCollection();
map.entities.push(infoboxLayer);
infobox = new Microsoft.Maps.Infobox(new Microsoft.Maps.Location(0, 0), {
visible: false,
offset: new Microsoft.Maps.Point(0, 20)
infoboxLayer.push(infobox);
AddData();
function AddData() {
var offset = new Microsoft.Maps.Point(-3, 2);
var pin1 = new Microsoft.Maps.Pushpin(new Microsoft.Maps.Location(44, 66));
pin1.Title = 'Vendor';
pin1.Description = 'description';
Microsoft.Maps.Events.addHandler(pin1, 'click', displayInfobox);
dataLayer.push(pin1);
var pin2 = new Microsoft.Maps.Pushpin(new Microsoft.Maps.Location(11, 55), {
icon: '~/images/icons/pushpins/pins/pur.png',
width: 30,
height: 40,
text: '1',
textOffset: offset
pin2.Title = 'title';
pin2.Description = 'description';
Microsoft.Maps.Events.addHandler(pin2, 'click', displayInfobox);
dataLayer.push(pin2);
}function displayInfobox(e) {
if (e.targetType == 'pushpin') {
infobox.setLocation(e.target.getLocation());
infobox.setOptions({
visible: true,
title: e.target.Title,
description: e.target.Description,
width: 170,
height: 100,The whole idea of the theme module is that it changes all the look and feel of the map. You can't override those. You are better off using a custom pushpin without the theme module.
http://www.bingmapsportal.com/ISDK/AjaxV7#Pushpins2
https://rbrundritt.wordpress.com/2014/10/02/correcting-anchoring-pushpins-to-the-map/
http://rbrundritt.wordpress.com -
Changing the colour of part of an image
This is hopefully an easy one!
I have an image in a menu here (the red 'Supagard' one) that
I need to change the background of from black to the blue to match
the rest of the image :
link here
I've had a rummage, and seen how to change colours by
selecting the area with the magic wand tool, and then using :
Filters > Adjust Colours > Hue / Saturation
But is there away to select a specific colour? (Or I guess
the other way around and check the hue / saturation values for the
blue background?
Cheers,
IainIain71 wrote:
> This is hopefully an easy one!
>
> I have an image in a menu here (the red 'Supagard' one)
that I need to change
> the background of from black to the blue to match the
rest of the image :
>
>
http://www.ccmvaleting.co.uk/supagard2.htm
>
> I've had a rummage, and seen how to change colours by
selecting the area with
> the magic wand tool, and then using :
>
> Filters > Adjust Colours > Hue / Saturation
>
> But is there away to select a specific colour? (Or I
guess the other way
> around and check the hue / saturation values for the
blue background?
>
> Cheers,
> Iain
>
The 'Replace Color Tool' (one of the Bitmap Tools) is what
you are
looking for. After you select it you will be able to use the
eyedropper
to pick your 'from' and 'to' colors.
SKB -
How to change the colour in ALV of the particular coloum thru mouse rollove
Hi ,
Can any body help me in this ,
Im presently working on ALV's,and i want the color of the
any coloum to be changed when ever i move the mouse over that colum from the normal colour.
Thanks
AnilI dont think we have any events like On Mouse roll liek in VB yet.
Rgds,
Mano Sri
Maybe you are looking for
-
Can a family member access my info with known passwords from a different phone or computer "spying"
I was just wondering if somebody can access my personal info including web searches, emails, text messages, contact info, recent calls and photos and vioedo just about every thing done on your iPhone and PC. If they are the on accouts. I think they h
-
I got a new laptop and installed iTunes and plugged in my iPod but it won't get recognized on iTunes or in my computer, the computer says unknown device found and that the software was not successfully installed. What shall I do ? I tried reinstallin
-
Mac OS 9 and the old Plastic Monitor?
Anyone find OS 9 (Classic) and the Plastic monitor incompatable? I tried to open Classic on my G4 and the screen was totally black. I now have a G5 and I have a bunch of old documents in an old 3.5 WordPerfect application that only runs in Classic. I
-
Other phone connected to iCloud rings when someone calls my phone
How do I turn off other phones and iPads from receiving my phone calls to my number? there is nothing in settings for this
-
Directly Dialing a Phone's Speakerphone/Intercom
We have a client that is requesting to be able to dial directly to the speakerphone (intercom) of another phone. We know that we can configure an intercom button on the phones to do that, but if there are 20 phones in the office, the receptionist wou