How to change the colums of a table control scrollable?

Hi Guys,
I have one table control in my webdynpro component. Datais are filling to the table dynamically . Fields also may vary depending on the requirement.if some 20 or 30 fields are filling into my table in the run time, then i need to scroll the fields. Each field should be scrollable. Using which property of the table i can achieve this.??
Can u people help me in this.
Thanks
Subin

Hi
Thanks for ur reply. Actually i am using this table control for search help. the same table control is using for the all search helps. if some 20 fields are there in th search result all the fields it is showing in my table control. eg. one costcentre field is there in my resultin table control. But it s showing only 'costcen' instead of 'costcentre.' It is not showin the resulting costcentre value also fully. for this i need to scroll the particular field alone for seeing the full value. This is my requirement.
If i am giving scrllable col count as 1 it is showing only one field. this is not wt i ws expecting.
Please try to give me a solution.
Thanks
Subin

Similar Messages

How to change the domain in zee table

hi
how to change the domain in zee table
the domain is activated , i want to change the length.
can anyone help me

Go to SE11.
Give the name of the z-table. Click change.
double click on the data element name and over there again double click on the domain name. So you are in the domain.
There change the length of the domain as per your requirement.

How to deactivate the fields in a table control of a standard screen

Hi,
I have an requirement to deactivate the fields in a table control of a standard screen in ME22n transaction.I am using a BADI "ME_PROCESS_PO" and in item mathod i am looping at screen for the screen field name in the table control.But it is not working. Can anyone give me the possible solution . Thanx in advance.
With Regards,
Ajit.

>
Vivek Joshi wrote:
> Hello Router ,
> I do not want to set the focus , I want to get focus . User can click on any cell in the table and then press a button in the toolbar . Now in the event handler of the button i want to under which column User has set the focus .
> I hope , I am clear now .
> Thanks for your help
> Regards
> Vivek
An yet you keep getting suggestions of how to set the focus. I looked through the API documentation and I don't see anything that would suggest you can request to see where the current focus is. Perhaps someone might still come along with a solution, but my hopes wouldn't be too high at this point. I can pass the requirement onto Product Definition, as the use case does seem interesting. Perhaps it is something we have even considered in the past.
But for now, there might be a better way to solve your problem. It will probably mean redesign the interaction. What exactly are your requirements? Do you need to be able to get the data in a particular cell of table when a button is clicked? Just throwing out some ideas here, but maybe just use the lead selection to select the row, but then have a button choice to choose the action associated with the column you want. A hack for sure - but it might work. Also it doesn't help you right now, but in the near future update to NetWeaver 7.0, WDA does have a onColSelect event for the table.

How to read the field value from Table Control

Hello Experts,
I am creating my first Table Control Screen. Basically I have to create a screen (102) with a table control which has 2 fields: A_QTY, B_QTY and 2 Buttons: SAVE, EXIT.
When Clicked on 'SAVE' the data (MATNR) from a previous screen (101) and the data (A_QTY, B_QTY) from the new screen (102) should be saved into a Z-table.
Internal table t_data has 3 fields.
MATNR
A_QTY
B_QTY.
Table Control TC_RACK was declared like this:
controls tc_rack type tableview using screen 0102.
I/0 Fields:
A_QTY type ZQTY.
B_QTY type ZQTY.
The screen Flow Logic:
process before output.
module status_0102.
loop at t_data into w_data with control tc_rack.
endloop.
process after input.
module exit_0102 at exit-command.
loop at tc_rack.
endloop.
module user_command_0102.
module status_0102output.
set pf-status 'STATUS_102'.
set titlebar 'TITLE_102'.
describe table t_rack lines tc_rack-lines.
endmodule.                 "status_0102 output
process after input.
module user_command_0615 input.
case ok_code.
   when 'SAVE_RK'.
   when others.
endcase.
endmodule.                 "user_command_0102 input
Now for eg, when the users enter values for A_QTY and B_QTY like this:
A_QTY     B_QTY
1000         2000
3000         4000
How can I read these values and pass them to T_DATA so that I can save it into Z-table?
I greatly appreciate your help.
I've gone through some previously posted threads and could not understand because my knowledge in this area is preliminary.
Thanks a lot.
Could you please let me know
Edited by: dev a on Jan 13, 2010 2:46 PM

Hi dev a
You should use
DATA: lv_name(30) TYPE c.
FIELD-SYMBOLS: <QTY> type ZQTY.
GET CURSOR FIELD lv_name.   "Get the field name in table control
check sy-subrc = 0.
assign (lv_name) to <QTY>. "Here you get the value in <QTY>
check sy-subrc = 0.
Also use <your table control>-current_line to get the table index uo're currently on.
Hint: Do not use GET CURSOR LINE if you want to get table index since this gives you the line relative to dialog screen
Good luck
Dean Q.
Edited by: Dean Q on Jan 13, 2010 11:11 PM

How to change the width of a switch control?

If I set long on&off texts, they can't be fully displayed. How to change the width of this sap.m.switch control?
P.S., "width" attribute doesn't work here.

Hi Jocy,
A switch is just a simple boolean control : true/false, yes/no, on/off. Other possibilities are not possible.
If you to need to choose between, say, black/white, then a switch is *not* a good choice; nothing stops you from adding yellow/red/blue to the mix as well.
If you *do* have a strict boolean choice (again, only rue/false, yes/no, on/off) then I would suggest adding a descriptive label with the simple, short switch control.
Otherwise, I would strongly advice using a different type of control (RadioButtonGroup, DropdownBox)

How to change the value from one input control to another input control?

Hi Experts,
I want to change the value from one input control to another input control. For Example if i change month in first tab. it should reflect in second tab also. How should we acheive through input control or some other option.
Here I attached screen shot.Please help me for this

Hi,
It is not possible to have Input controll in all tabs that will be set from another .
But There is one workaround .
Follow the link below .
http://davidlai101.com/blog/2013/08/13/web-intelligence-input-control-that-affects-all-tabs/

How to change the colour of a table cell boder?

I have just changed from Dreamweaver MX t CS5 and cannot find how to add a colour to the borders of a table and table cells. In the old MX it was easy just selected the colour for border in properties but in CS5 this option is not availble. Have tried formatting with CSS but this only colurs the outer boarder can anyone help?

Not sure what you mean by a custom class would it be possible to give me an example?

Changing the column postion in table control

Hi All,
In table control i want to change the columns postion according to users requirement.
How to do that?
Thanks for advance.
Regards,
krishna

Hi,
In the top right hand side of the table control..there will be button for variant..
there you can create a variant..in the variant..you can move the columns around and save it as variant..then they can choose the variant..
Thanks
Naren

How to get the focus in a Table Control

Hello Experts,
I have a simple Table control in my screen . I want to know under which column my cursor is ? Basically i want to get the focus the table control . How can i achieve this ?
Thanks
Vivek

>
Vivek Joshi wrote:
> Hello Router ,
> I do not want to set the focus , I want to get focus . User can click on any cell in the table and then press a button in the toolbar . Now in the event handler of the button i want to under which column User has set the focus .
> I hope , I am clear now .
> Thanks for your help
> Regards
> Vivek
An yet you keep getting suggestions of how to set the focus. I looked through the API documentation and I don't see anything that would suggest you can request to see where the current focus is. Perhaps someone might still come along with a solution, but my hopes wouldn't be too high at this point. I can pass the requirement onto Product Definition, as the use case does seem interesting. Perhaps it is something we have even considered in the past.
But for now, there might be a better way to solve your problem. It will probably mean redesign the interaction. What exactly are your requirements? Do you need to be able to get the data in a particular cell of table when a button is clicked? Just throwing out some ideas here, but maybe just use the lead selection to select the row, but then have a button choice to choose the action associated with the column you want. A hack for sure - but it might work. Also it doesn't help you right now, but in the near future update to NetWeaver 7.0, WDA does have a onColSelect event for the table.

Error while trying to change the Column description in Table Control

Hi,
I have created a table control using the wizard in Module Pool.
When i try to change the column description of the table control or adjust any other element which is already available on the screen and not in table control. It gives me an error
Unable to transfer data. End Program?
Any help would be appreciated.
Thanks
Sarves S V K

Hi.,
Check these [Table Control Change Column Description|Add new columns in table control in custom screen program;
and [Add Columns in Table Control|Re: Table control columns]
else delete and create Table control Again..!!
hope this helps u.,
Thanks & Regards,
Kiran

How to change the execution order of data control and backingbeans

Hi,
I have a form for a BPM human workflow. It has an inputText and a selectOneChoice component in the form.
The list of value for the selectOneChoice is initiated based on the value in the inputText.
I have a data control - JavaBean, which returns a list of values based on a parameter for the selectOneChoice and the parameter is binded with the value of inputText defined in a backingBean. I also set the default value of the inputBox in the backing bean with setValue().
The problem I have is that the data control for selectOneChoice is loaded before the inputText or backingBean is loaded. Therefore, the parameter is null.
I tested the same combination in an ADF web app and it works fine. In the app, the inputText and the backingBean are loaded first and then the value of inputText is sent to the data control.
How can I change the order of the execution? I need to make the inputText and backingBean loading first before the data control for the list of values loading.
Edited by: user626218 on Oct 10, 2012 9:25 PM

Hi,
The inputText is pre-populated based on the user profile in the BPM instance. I tried to render the selectOneChoice if the value of the inputText exists but the data control for selectOneChoice is loaded before the backingBean so it keeps getting a null as parameter.

How to optimize the column width in Table Control

Hi all,
When I am displaying fields in Table Control, the columns are displayed in full length, and I am unable to see all the fields at once.
So as in grid , where we optimize the column width using layout, do we had any property for TC to do so.
thanks for your help.
Points would be awarded .
Regards,
Anil .

Hi,
In Se51, you can do this one, ust open your table control and resize the TC, there is no direct option to do this for entire TC, you need to do this field by field, and arrage the TC to adjust in a Single screen. In the field parameters, you have the field lenghts, there you can minimize the length of a field
Regards
Sudheer

How to save the selected records from Table control in dialog programming

Hiiiiiiii Every1
Actually the problem is like this:-
I have to select some records from table control and then want to save the selected records in DB table.
Example
I have some rows having inforamtion bout employees...
Now what i want is that when i click on 'SAVE' button then these selected rows should be moved into DB table.
Sachin Dhingra

see below example, I have added INSERT option after DELETE option.
REPORT demo_dynpro_tabcont_loop_at.
CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
DATA cols LIKE LINE OF flights-cols.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF demo_conn.
TABLES demo_conn.
SELECT * FROM spfli INTO TABLE itab.
LOOP AT flights-cols INTO cols WHERE index GT 2.
cols-screen-input = '0'.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
MODIFY itab FROM demo_conn INDEX flights-current_line.
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'TOGGLE'.
      LOOP AT flights-cols INTO cols WHERE index GT 2.
        IF cols-screen-input = '0'.
          cols-screen-input = '1'.
        ELSEIF cols-screen-input = '1'.
          cols-screen-input = '0'.
        ENDIF.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDLOOP.
    WHEN 'SORT_UP'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) ASCENDING.
        cols-selected = ' '.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'SORT_DOWN'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) DESCENDING.
        cols-selected = ' '.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'DELETE'.
      READ TABLE flights-cols INTO cols WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          DELETE itab.
        ENDLOOP.
      ENDIF.
    WHEN 'INSERT'.
      READ TABLE flights-cols INTO cols WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          itab1 = itab.
          modify itab1.
        ENDLOOP.
      ENDIF.
      if not itab1 is initial.
        INSERT dbtab FROM TABLE itab1.
      endif.
ENDCASE.
ENDMODULE.

How to increase the rows of a Table control on ITS

Hi,
I'm trying to increase the number of rows to 20 on ITS but it always shows 2 rows per navigation. Although in the backend module pool there are 8 rows and the GV_SOS_LIST_CONTROL-LINES contains the total no of rows of the internal table. yet there are always 2 rows getting printed. This screen is in different function group and being called from some other function group i.e BBP_SC_UI_ITS. Are there any parameters that we have missed out to pass from BBP_SC_UI_ITS to our function group. Reply needed urgently!!!!!!!!!!!

Hi,
i tried increasing the rows on the browser by hard coding the counter and then the rows do increase but the records that are shown are still 2 per navigation. i doubt if it is a screen size constraint. the transaction in which i'm trying all this is bbpsc01.

Change the DB_LOCATION of a Table in Mapping after Copying it

Hello!
Does anybody know how to change the property DB_LOCATION for table in a mapping after copying it to another modul withhin the same project with OMB PLUS.
After copying the mapping all objects still points to the old objects in the repository. But this objects are now in the wrong module. I have the same repository objects also in the new module and i want to change the mapping operator to point to the objects in the new module.
In the mapping editor you achieve this by reconciling the mapping object with the new object in the other module. How can i do this with OMB PLUS?
Thanks in advance
Alexander
Edited by: user13336549 on 14.09.2010 07:40

Hi Alexander
After copying a table to a different module, edit the module to set the data location, configure the module to define the location and synchronize the mapping to use this table.
In OMB to synchronize inbound and outbound use OMBSYNCHRONIZE command
Inbound:
OMBSYNCHRONIZE TABLE '$OMB_CURRENT_PROJECT/SALES/TABY' TO MAPPING 'M_W_PARAMS' OPERATOR 'TABY' USE (RECONCILE_STRATEGY 'REPLACE', MATCHING_STRATEGY 'MATCH_BY_OBJECT_NAME')
Outbound:
OMBSYNCHRONIZE MAPPING 'M_W_PARAMS' OPERATOR 'TABX' TO TABLE '$OMB_CURRENT_PROJECT/SALES/TABX' USE (RECONCILE_STRATEGY 'REPLACE', MATCHING_STRATEGY 'MATCH_BY_OBJECT_NAME')
Cheers
David

How to change the colums of a table control scrollable?

Similar Messages

Maybe you are looking for