How to change the corporation directory ?

On the Corporation Directory in the Ip phone ,I find all users in CCM user configuration windows, how to delete some user ? Because I don't let staff know the CDR admin user .
And more ,if my corporation has two branchs , I want to configure two branch directory in Corporation Directory ,how to set up ?

The procedure for hiding a user in the corporate directory will vary depending on your directory integration. Please see the following link for the steps for hiding users in DC Directory and Active Directory. Regarding multiple directories, the built in corporate directory looks at one particular directory for its lookups. You could build an XML application that would look at different directories or different branches of a single directory. I believe Berbee (www.berbee.com) makes an application that will do this.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00804d2087.shtml
Hope this helps. If so, please rate the post.
Brandon

Similar Messages

  • How to change the output directory of .xml files

    Hi,
    There are lots of .xml files generated under
    $ORACLE_AS_HOME/j2ee/home/applications/xmlpserver/xmlpserver/xml.
    (ex:/usb/bipub3/oracle/oc4j_bi/j2ee/home/applications/xmlpserver/xmlpserver/xml).
    I found these files are generated in the following operation;
    1.Log in BI Publisher.
    2.Select the Schedules tab.
    I think they are kind of temp files so we will be able to delete them.
    But I'd like to know how to change the output directory.
    Can we change the above directory to other path?
    Regards.

    Why? As that may invalidate support since you configure/alter the deployment.
    The location is specified in oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver.war, so you could go into the war file and alter it.

  • How to change the default directory from within SQL*Plus ?

    Hello,
    I want to change the default directory directly from within SQL*Plus to be able to launch my command files with simple instructions like :
    @my_command.sql
    If I haven't launched SQL*Plus from the directory containing the file my_command.sql, how do I change the default directory to the directory of my command files ?
    I've searched through the Oracle documentation, there's no SET DEFAULTDIR or something like that. When I do a SHOW ALL, there's no variable containing the default directory.
    If you have an idea...
    regards,
    Jérôme.

    Hi Jérôme (J鲴me ?),
    You cannot directly do that, but you can use @@ instead of @ to run subscripts in the same directory as the superscript
    # head /tmp/tl30/xxx/[xyz].sql                    
    ==> /tmp/tl30/xxx/x.sql <==
    prompt call y
    @y
    prompt call z
    @@z
    quit
    ==> /tmp/tl30/xxx/y.sql <==
    prompt i am in y
    ==> /tmp/tl30/xxx/z.sql <==
    prompt i am in z
    # pwd                                             
    /root
    # sqlplus -s scott/tiger@lsc62 @/tmp/tl30/xxx/x.sql
    call y
    SP2-0310: Datei "y.sql" konnte nicht geöffnet werden
    call z
    i am in zKind regards
    Laurent Schneider
    OCM DBA

  • How to change the bookmarks directory ?

    Hi,
    I want to change the location of the user folder or only the bookmarks automatically on a sharing server for all users in a network.
    I tested an ADM but does not work (last update 2010), the profilemanager is not suitable to my request so til there a solution? .ini, registry key ?
    If not, what browser could do? (except opera, chrome and ie for other problems).

    Try using profile manager that may allow you to setup a profile on the d:\ drive if so that is where the bookmarks will then be stored. (If that does not work resort to manually editing the profile.ini)
    * see
    ** http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Changing_Profile_Folder_Location
    **http://kb.mozillazine.org/Profiles.ini_file

  • How do I change the extension directory?

    I installed JBuilder and it changed my extension directory from the default:
    JAVA_HOME\jre\lib\ext
    to:
    JBuilder8\jdk1.4\jre\lib\ext
    how do I change it back?

    nevermind, found a solution:
    uninstall the jdk and reinstall.
    it sets it back to \jre\lib\ext
    (there's still the question of how to change the extension directory arbitrarily, but i'm not going to lose sleep over it)

  • How to change default compile directory tmp_ejb?

    Dear all,
    Someone knows how to change the default directory "tmp_ejb...." in WebLogic Server
    7.0?
    This is the default directory where WebLogic Server 7.0 generates and compiles
    the EJB's declared in config.xml.
    I try to specify the attribute TmpPath="ANOTHER_TMP_LOCATION_DIRECTORY_FOR_EJB"
    in the EJBContainer node but still doesn't work.
    The same thing happens when I test this attribute on EJBComponent declaration.
    Someone knows if there is an enviroment variable that specify this tmp_ejb location
    path?
    It's false that the tmp_ejb is located where the config.xml file is placed.
    I have 3 weblogic servers and they haven't the same behaviour.
    Someone can help me??????
    Thanks.

    I ran into the same problem and was wondering if you got an aswer the question you posted in BEA's news group: "How to change default compile directory tmp_ejb?
    Thanks

  • How can I change the source directory in Netbeans

    Hi there,
    Thanks for reading.
    How can I change the source directory in Netbeans so I can have a src directory?
    Thanks,
    Lorenzo

    Forgot to say Netbeans 3.6.
    thanks

  • How to change the "short name (account name?)" and home directory name?

    Hi,
    I recently purchased a new iMac and migrated account info from my MacBook Pro.  I happened to use random account name during migration without knowing it will not be easy to change the short name (account name?) and home directory name.  As a result, I am now having extremely confusing short name and home directory name on my new iMac.
    I did online search to find out how to change the two names, but I could only found somethig like "enabiling root user and....."  I have no idea what it was talking about and I don't want to take risk altering such advance set up manually.
    Please advice how I can change the short name and home directory name safely without much PC knowledge.
    Thank you very much in advance.

    There are a few ways of doing this. The easiest method is logging into the first account and copying everything to an external drive (or flash drive or whatever), which changes the permissions so that others can see the files.
    Then, login with the new account and copy the files over. Once they are copied, the correct permissions will be applied again (so other people on your computer can't access them).
    If you can't do this method for one reason or other, you can do some terminal commands to change the ownership of the files. Login to the new account. If it is an admin account, open terminal and type the following command:
    sudo chown -R -v yourusername:admin /Users/originalaccountnamehere
    That should change the ownership of the files from your old account to the new one. At that point, you can simply drag the files into place.

  • How to change the default structure when exporting data in CSV format?

    Hello,
    can some one tell us how to change the default structure in CRM when exporting lists in CSV format (with Option "Always use unformatted list format (CSV) for download" ? Because we want to add a new structure for our own -is it possible ?
    If it is possible where can we find these structure ? In the blueprint customizing ?
    Thank you very much,
    Christian

    There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
    Excerpts from sun docs:
    However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
    Example:
    Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
    Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
    Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
    Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
    If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
    Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
    Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
    Details are here
    http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
    My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
    Will update if i find more information

  • How to change the default Real-Time Collaboration page?

    Who can tell me how to change the default Real-Time Collaboration page?
    If I want to add my corporation logo in the top of the default page.How to do?
    Thanks!

    Thanks for your help.
    "Click the Sites tab to display all sites and their IDs for your system." But I clicked the sites tab ,it showed "http://hostname:7777/imtapp/app/home.uix". I could not find the siteID parameter from it. Why?
    How to get it from command?

  • How to change the default JRE when there are several version of JRE in Sys

    How to change the default JRE when there are several version of JRE in System?
    i have installed j2sdk1.5.0 then installed j2ee1.4,then installed Weblogic6.1 which use jdk1.3
    Now the JRE is jdk1.3\bin
    When run class that was compiled with jdk1.5,throw:
    java.lang.UnsupportedClassVersionError
    How can i change the jre to 1.5?

    There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
    Excerpts from sun docs:
    However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
    Example:
    Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
    Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
    Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
    Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
    If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
    Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
    Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
    Details are here
    http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
    My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
    Will update if i find more information

  • How to change the default admin password for IAS/UDDI

    Using "OracleAS UDDI Registry" 10g Release 2 (10.1.2)
    http://docs.oracle.com/cd/B15904_01/web.1012/b14027/regwsuddi.htm
    How to change the default password
    ias_admin/ias_admin123
    http://xxx.xx.xxx.xx/uddi/publishing

    Hello NJ,
    I tried your solution and its a very good workaround for the workbooks stored in the Database, but when i open workbooks from file system then Discoverer defaults the export path to the Directory from where we have opened the workbook.
    My clients are having most of their workbooks stored in File system & stored at different locations. So i wonder if there is just one common solution if possible?
    Thanks

  • How to change the color background in Pages for iPad?

    how to change the color background in Pages for iPad?

    You can find many themes at https://github.com/hdoria/xcode-themes  There's a download zip button on the right side of the page.
    Unzip and and copy the .dvtcolortheme files into /Users/YourUsername/Library/Developer/XCode/UserData/FontAndColorThemes Create the directory if it doesn't exist.
    If you can't find the Library directory you can get to it by using Finder's "Go to Folder..." option under "Go" or press shift + cmd + G then type the path.

  • How to change the path of the Transport

    HI all!
    I had the system of portal dev,qas,prd,I want to made the export folder of the dev point to the import folder of the qas.But how to change the path of the transport ?I change the file of the D:\usr\sap\dev\SYS\global\pcd\pcdStartup.properties,But it not useful.I think my type is not correct.Plz tell me the key.thanks very much!!!
    D:\usr\sap\dev\SYS\global\pcd\pcdStartup.properties,I changed:
    Transport Application
    Root directory for exporting transport packages
    #Pcd.TransportApplication.ExportRootDir=
    qas\Import
    Root directory for importing transport packages
    #Pcd.TransportApplication.ImportRootDir=${Pcd.Share}/Import
    Directory for temporary transport files
    #Pcd.TransportApplication.TempDir      =${Pcd.Temp}/transport
    Edited by: joecui on Nov 12, 2008 8:15 AM
    Edited by: joecui on Nov 12, 2008 8:16 AM

    Did you try to remove the "#" character before every line you changed?
    Save the file...
    Reload/Refresh it in the Portal...
    Try if that helps you.
    Cheers,
    Benjamin

  • How to change the web icon in the browser window

    i have created my site and cant find how to change the icon in the browser window (like they have done at the top of this page with the Adobe icon before the  Adobe Forums: text )would anyone be kind enough to give me some help??

    Do you mean the favicon?
    I only just recently learned about favicons myself - so if you google the word you'll get lots of resources for it. Bascially it's a little icon file that sits at the root directory of your site that the browsers find and display for you. As long as the file is there (*named favicon.ico*) it will show up automatically if I'm correct in what I've read.
    Is this the thing you're looking for? (edit: it also shows up in your bookmarks list in firefox - if this is the one you want that's the favicon file)

Maybe you are looking for