How to change the currency in Adobe X Reader
Hello,
New here and looking for some help in changing the currency from the £ sign to a $ sign.
I am not very program savy so any help anyone could provide would be great!
Thank you in advance.
Is this a form you created in Acrobat or is it a form that you're using with Reader? If the latter, there's nothing you can do if the field has been set up to format the field with a £ for the currency symbol.
Similar Messages
-
How to change the currency in Billing plan in SO line item
Hi Experts
Pls help in following scenario.
Company Code Currency: HKD
Sales Document Currency: INR(Indian Rupees)
Item Pricing Condition Currency(PR00): 100 USD
Item Netvalue: 4800INR(System caluculated as per exchange rate type M)
Document Netvalue: INR 4800
The sales document item is linked to a billing plan.
I wanted to maintain 100USD in the billing plan.
When i goto Sales->item-->Billing Plan, The currency in billing plan screen is document currency and is greyed out.
How to change the Currency in Billing plan (to Item Condition currency) and maintain the Billing value in USD?
Pls help.
Regds
HariCurrency change we wanted to do is not during Invoicing.
In billing plan itself we want to change the currency setup the billing value in item condition currency.
Any one, pls help. -
How to change the currency of the order while creating the sales order??
Hi all,
I am new to this field.I have to create a Sales Order with reference to another
SO but with different sold to party.Here i also have to change the currency of
order from dollar to GBP.
Please assist me to do this.
Thanks.
syedHi
Goto VA01 and try to create the order with reference to the Old order
and after that order details are copied to the New order then, change the Sold to party and the currency in the Sales order Header and see? whether it allows you to change it or gives some error? then based on that you have to check and do further processing.
Try and see
If it won't allows you to change
then create a New SO with the new sold to and currency and just take the old orders data from VBAK and VBAP tables and enter into the new order fields and save it will be created.
<b>Reward points for useful Answers</b>
Regards
Anji
Message was edited by:
Anji Reddy Vangala -
I have reinstalled and repaired iTunes to try to get my currency to go back to US dollars but everything is displayed in yen. How do I change this?
Dell Dimension 8400 Windows XPIt sounds as though you need to change the country of the music store.
There should be a little box either top left or bottom centre of the Music Store and you can set your country there. -
How to change the resolution af adobe captivate
Hi,
I have a surface 3 with high resolution (2160 x 1440).
In Adobe captive - the menu bar is very small due to the high resolution
So i tried to modify the resolution of adobe captivate in the compatibily mode but it won't work :-(
In the meantime, i will use the magnifer :-'( but it's not very convenient.
Can you stop my headache ? ;-)resizeImage does not let you set 'Scale Styles'. If you want to scale the styles you need to use scriptlistner.
Here are examples for "Constrain Proportion" and "Resample Image".
activeDocument.resizeImage( undefined,undefined,300,ResampleMethod.NONE);// change the dpi without resample
activeDocument.resizeImage( new UnitValue(2,'in'),undefined,72,ResampleMethod.BICUBICSHARPER);// change width - defaults to constrain proportion
activeDocument.resizeImage( new UnitValue(5,'in'),new UnitValue(5,'in'),300,ResampleMethod.BICUBICSHARPER);// change both w and h - may or may not matain proportions -
How to change the value in DFF to read only
Hi,
I need to change the DFF to read only after user entered the value and saved.
Scenario:
In oracle order management, order entry screen, User will enter the order and select the lot number in the DFF. After processing and closing the order, the user can call the order and change the lot number in the DFF. So i need to disable the DFF(i.e) change the lot number field from enter-able to read-only , After the order is processed and closed.
Kindly give your suggestions to achieve this.
Thanks,
KarthiUsing form personalization, you can display error message when user tries to update DFF field value.
Triggering Event : WHEN-VALIDATE-RECORD
Condition : (SELECT ATTRIBUTE20 FROM OE_ORDER_HEADERS_ALL WHERE HEADER_ID =:ORDER.HEADER_ID) <> :ORDER.ATTRIBUTE20
Action : Error Message : You cannot update Lot number. -
How to determine the presence of adobe pdf reader using java/J2EE?
Can someone share this with me. I need to determing how do we determine if adobe reader is installed on a user's machine or not - using java/J2EE.
Any ideas?
Thanks,
Pratik.I am in the software, where can I find it?
On Tue, Jan 27, 2015 at 9:59 AM, Sara.Forsberg <[email protected]> -
How to change the default currency in CJ32 and CJ33
Dear all,
As required by the user, I want to know how to change the default currency from controlling area currency to object currency in TCODE CJ32 and CJ33. Currently, the controlling area currency will be defaulted in the field "Views in".
Could any one help me? Points will be awarded.
Thank you.
Christina.
Edited by: Virendra Pal on May 5, 2010 8:34 AMHi Christiana ,
Once you are in tcode CJ30 / CJ32 , Enter either Project definition or WBS element and this shall take you to the Budget screen and once you are here you can find a drop down with two options .One is Controlling are currency and the other one is Object currency.
Since the Currency is set to Object currency in OPS9, System shall allow the budget values in Object currency and if the user wants to see the same values in Controlling are currency ,then the user needs to view the values in Controlling are currency using the drop down .
Regards
Judy -
I have read the help info, but I can't find how to change the default email address, to the one that is my adobe I'd?
Adobe Reader for iOS doesn't set the default email address when you email a PDF.
It's found in the Settings app:
Settings > Mail, Contacts, Calendars > Mail > Default Account -
How to change the Field Symbol, so Adobe Forms takes it as a Table?
Hi guys,
I created an Field Symbol, in a Interface which I use for Adobe Forms. The type of the Field Symbol is STANDARD TABLE, and this field symbol I fill with data from another program.
But the problem is that in adobe forms, this Field Symbol is taken as TEXT FIELD and not as Table... and this shows me a Dump because it can't convert Internal Table to type C (the dump is like that).
What I need, is how to change the Field Symbol, so Adobe Forms takes it as a Table?
I looked at Adobe Form, and found this:
The Type Category of the Field Symbol is DICTIONARY TYPE and I think I need to change it to Internal Table as shown in the right picture.
Does someone have any idea?Hello Taly,
To what i understand your requirement, you need to pass data from Field symbol to internal table in Adobe form.
You have done it correct partially. I have replicated your scenario and steps are below -
1) Create a Z structure
2) Create Z Table Type
3) Create Adobe Interface with Table & Field Symbol. Also do coding as shown to assign the internal table populated in driver program to filed symbol.
4) Design Form as -
5) Code driver as -
*& Report ZR_AF_FS_1
REPORT zr_af_fs_1.
DATA: fm_name TYPE rs38l_fnam,
fp_docparams TYPE sfpdocparams,
fp_outputparams TYPE sfpoutputparams,
it_kna1 TYPE ztt_fs_1.
* Sets the output parameters and opens the spool job
CALL FUNCTION 'FP_JOB_OPEN' "& Form Processing: Call Form
CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*&---- Get the name of the generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME' "& Form Processing Generation
EXPORTING
i_name = 'ZAF_FS_1'
IMPORTING
e_funcname = fm_name.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*-- Fetch the Data and store it in the Internal Table
SELECT kunnr name1 name2 adrnr FROM kna1 INTO TABLE it_kna1 UP TO 15 ROWS.
* Language and country setting (here US as an example)
fp_docparams-langu = 'E'.
fp_docparams-country = 'US'.
*&--- Call the generated function module
CALL FUNCTION fm_name
EXPORTING
/1bcdwb/docparams = fp_docparams
it_data = it_kna1
* IMPORTING
* /1BCDWB/FORMOUTPUT =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*&---- Close the spool job
CALL FUNCTION 'FP_JOB_CLOSE'
* IMPORTING
* E_RESULT =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
6) Output -
BR. -
How to change the page break in adobe forms
Does anyone know how to change the page break on an adobe form? I'm hoping it will be the same way you change the page view in excel.
Can anyone help?
Thank you in advance,
PriscillaHI
YOU CAN USE THE FOLLOWING SYSTEM FIELDS OF SMARTFORMS FOR THE MENTIONED PURPOSE
<b>&SFSY-PAGE& </b>
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
<b>&SFSY-FORMPAGES&</b>
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output
<b>&SFSY-JOBPAGES& </b>
Contains the total page number of all forms in the currently processed print request.
REGARDS
ANOOP -
How can you add/change the currency rate in spro?
Hi all,
you can add a new currency code by going to spro --- general settings --- check currency codes
for example: PERU ---> PEN
But, how can we add/change the currency rate PEN in spro?
for example: Peruvian Nuevo Sol = 4,3567619
Is it still in customizing? And if so, where can i find it?
Many thanks in advance.
Kind regards,
Pamela.Hi Aman,
I have entered the field to add the new currency rate.
But the system doesn't want to valid my new rate.
I get the following error message:
"Input should be in the form ._,____ "
Do you know how to override that command?
Thanks.
Regards,
Pamela -
How to change the language setting in Adobe Flash CS6, from Chinese to English?
How to change the language setting in Adobe Flash CS6, from Chinese to English?
Unless you have a multilanguage serial/ installer, you are on Creative Cloud or care to run through language swap you can't. Retail serial numbers are language specific and most Adobe apps cannot be coerced or switched on the fly since without the proper language resources installed, this won't work...
Mylenium -
How to change the language of the Adobe Audition CC 2014?
How to change the language of the Adobe Audition CC 2014?
Hello Israel Costa,
it's laid down there: Adjust the install language | CCM
Good luck!
Hans-Günter -
How can i Change the currency symbols for swiss francs?
Hi,
i use Numbers '09.
How can i change the currency symbol for swiss franks from SFr to CHF. Because the international ISO abbreviation is CHF and not SFr.
Thanks,
ByeSwitch to Lion.
I checked several currencies and now they are OK.
Yvan KOENIG (VALLAURIS, France) samedi 8 octobre 2011 23:24:26
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
Maybe you are looking for
-
Downloading a video in an enterprise across ipads
We have issued ipads to all all sales people and would like to distribute content like marketing videos etc, through services like yousendit or dropbox without having to go through itunes. What is the best way to do that. Right now, we have doing a w
-
How to keep a FLA in an older format?
I've got Flash CS6 now in all its glory, but I work on shared files with other people who are still using 5.0 and 5.5 and aren't going to upgrade. So I need to "Save As..." to version 5.0 every single time I save (or at least remember to do it before
-
The Install Button is not working in my CS Extension
Help with my abobe extension cs6
-
Give Discount/Surcharges to PR00
Hi Experts, Please can you explain how to give discount to PR00 base value? For example, currently the pricing logic is PR00 value * quantity = gross value. Any discount or surcharges will be based on this gross value. How to change it to give discou
-
IPhone 1, 2.0 is rarely receiving phone calls
Most people who call me say they call, then after a ring or two it beeps at them and hangs up. Never getting my voicemail. Then, other people say it goes straight to voicemail without ringing. I am always getting voicemail and no missed calls at all