How to change the date generate absence quota(Time Evaluation)

Hi all experts,
Currently system use Time Evaluation, and generate absece quota in last day of month.
So any way to change that system will use differ day to generate absence quota?
Example use day 28 of each month will generate absence quota? Have any enhacement or configuration?
Thank you,

Tatsuya,
there 2 better solutions for this, one is Generate Period Parameters and according accordingly the month end date you follow and use the same period parameter in V_T559L table to your Quota.
and other Solutions is Write a PCR like Below.
ABCD     (PCR Name)
   varstcrumo
        Varstreday
             28
               hrs=1
               adddbTIME (TIME - Daily Time type - Create it in V_t555a table)
Save it and go to TM04 Schema, and put this PCR with Function ACTIO and make sure to insert this before QUOTA Function and Before CUMBT. and save it, and dont forget to put TIME Time to your Base entitlement.
you can run Time Evaluation to test it...let me know how it worked.

Similar Messages

How to change generation date of absence quota with Time Evaluation methos

Hi all,
IS there any way to change generation date when TIme Evulation generate absence quota?
Currently system will use last day of month as generation date, Validity and Duduction period set correctly.
Base entitlement relate with Monthly,
Accrual period setting in selection rule is Month
Example: system generation absence quota in PT60 with 1 day Normal Leave Entry date 31.06.2011
Valid from 01.06.2011 to 31.12.2012 ; Deduction from 01.06.2011 to 29.02.2012 (extras 2 month)
Can we change ENtry date to 28.06.2011 , because in the last day of month they did not yet have quota but they need it for advance (approver from his/her Manager) ...
Thanks,
R1V

Hi,
The best way i think is to have negative deductions for the quota.
This time as it is on 28 you want to push it to 2 days earlier and later if there is another person with a day as 25, you need to again change the generation date isnt it.
Instead, if you have the negative deductions, you need not worry about the generation date.
Hope this helps.
Cheers,
LG

How to change the date format?

Hi,
I need to display the data format as(YYYY-MM-DD). But now it displays(2009-1-9)
Here is my code snippet which i used to display the data format as(2009-1-9)
*<INPUT TYPE=TEXT NAME="date_submitted" MAXLENGTH=20 SIZE=10 VALUE="" onBlur= "return dateSubmitted()">  (YYYY-MM-DD)*
*<SCRIPT LANGUAGE="javascript">*
dateSubmitted()
*</SCRIPT>*
function dateSubmitted()
                    if (document.pgUpdate.date_submitted.value == "")
                         date = new Date();
                         month = date.getMonth() + 1
                         document.pgUpdate.date_submitted.value =
                                        date.getYear() + "-" + month + "-" + date.getDate();
                    return true;
Can anybody help me how to change the date format?
Thanks in advance!

prit123 wrote:
use SimpleDateFormat class. The code is :He posted a Javascript related question, not a Java related question.
Please use forums devoted to Javascript. You're here at a Java/JSP forum.
There are JS forums at webdeveloper.com and dynamicdrive.com. Good luck.
String formatPattern = "yyyy-mm-dd";
SimpleDateFormat sdf = new SimpleDateFormat(formatPattern);
sdf.format(yourdate);yyyy-mm-dd denotes year-minutes-days. Please go read the SimpleDateFormat API as well.

How to change the date and time during OVM installation for Fusion Apps

Hi,
The customer is using Fusion Instance which is a V1 (Build 19) OVM installation shipped by Oracle with Demo Data (including seeded user IDs and roles) in it.
Now they have issue with Date format for the application on the screens is showing MM/DD/YYYY where as it should be (Singapore) Standard is DD/MM/YYYY.
Q/A: How to change the date/time in OVM image
Refer SR : 3-5640792461
Regards
Ganesh Ananthapadmanaban

Not a problem. There are a number of other system and network setup commands that you might find useful at some time. From within the Remote Desktop Admin in the Send Unix Command window type:
networksetup -help
systemsetup -help
That will give you lists of the commands, including the one I posted above, with their basic syntax. They're handy to know.
Cheers.

How to change the date format in xml form?

hi,
How to change the date format in xml form?
For example: 11/20/2008 3:00:03 PM -> 11-20 03:00
Any opinions greatly appreciated!
Thanks.
Edited by: ke wenxing on Dec 2, 2008 8:33 AM

You could go to System - User Profile - Own Data would take you to the "maintain user profile screen"
Click the defaults button and change the date format.This changes date format for all the dates in your login.

How to change the date format YYYYMMDD to MM/DD/YYYY

Hi ,
How to change the date format YYYYMMDD to MM/DD/YYYY .
Ex : 20071008 to 10/08/2007
Is there any function module for this ??
Regards
Rahul

Hi Sharma,
check the code:
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-031.
PARAMETERS: date1 RADIOBUTTON GROUP rad1 DEFAULT 'X', "SAP date format YYYYDDMM
date2 RADIOBUTTON GROUP rad1, "Date format like aprial31, 2006
date3 RADIOBUTTON GROUP rad1, "Date format like 31 apr,2006
date4 RADIOBUTTON GROUP rad1, "Date format like DD/MM/YYYY
date5 RADIOBUTTON GROUP rad1. "Date format like DD.MM.YYYY
SELECTION-SCREEN END OF BLOCK b2
FORM getmonth .
SELECT mnr
ktx
ltx
INTO TABLE T_month
FROM t247
WHERE spras = 'EN'.
IF sy-subrc NE '0'.
MESSAGE I "Message - Not able to get month values from the table T247
ENDIF.
ENDFORM.
DATA : temp_date(16) TYPE c,
temp1_date(60) TYPE c,
year(4) TYPE c,
daymonth(11) TYPE c,
daymonth1(11) TYPE c,
month(9) TYPE c,
day(2) TYPE c,
mon LIKE t247-ktx,
len TYPE i .
MOVE date TO temp1_date .
CONDENSE temp1_date NO-GAPS.
MOVE temp1_date TO temp_date .
IF date2 EQ 'X'. "The date format is like Aprial 31, 2007
CONDENSE temp_date NO-GAPS.
SPLIT date AT ',' INTO daymonth year.
IF STRLEN( year ) NE '4'.
error = 'X'.
WRITE : 'Invalid date format.'.
ELSE.
daymonth1 = daymonth.
CONDENSE daymonth1 NO-GAPS.
_len = STRLEN( _daymonth1 ).
l_len = 13 - len.
SHIFT daymonth1 RIGHT BY len PLACES.
CONDENSE daymonth1 NO-GAPS.
month = daymonth1.
CONDENSE month NO-GAPS.
SORT t_month BY monthltx.
READ TABLE t_month WITH KEY monthltx = month.
IF sy-subrc <> 0.
error = 'X'.
WRITE : 'Invalid date format.' .
ELSE.
len = STRLEN( month ).
CONDENSE daymonth NO-GAPS.
SHIFT daymonth LEFT BY len PLACES.
day = daymonth.
CONDENSE day NO-GAPS.
CONCATENATE year t_month-monthnumber day INTO o_date.
ENDIF.
ENDIF.
ELSEIF p_date3 EQ 'X'. "The date format is like 31 apr, 2007
CONDENSE temp_date NO-GAPS.
SPLIT i_date AT ',' INTO daymonth year.
IF STRLEN( year ) NE '4'.
error = 'X'.
WRITE : 'Invalid date format.'.
ELSE.
daymonth1 = daymonth.
CONDENSE daymonth1 NO-GAPS.
SHIFT daymonth1 LEFT BY 2 PLACES.
CONDENSE daymonth1 NO-GAPS.
month = daymonth1.
CONDENSE month NO-GAPS.
TRANSLATE month TO UPPER CASE.
SORT t_month BY monthstx.
MOVE month to mon.
READ TABLE t_month WITH KEY monthstx = mon.
IF sy-subrc <> 0.
error = 'X'.
WRITE : 'Invalid date format.' .
ELSE.
CONDENSE daymonth NO-GAPS.
day = daymonth+0(2).
CONDENSE day NO-GAPS.
CONCATENATE year t_month-monthnumber day INTO o_date.
ENDIF.
ENDIF.
ELSEIF p_date4 EQ 'X' OR p_date5 EQ 'X'. "Date format is like DD.MM.YYYY or DD/MM/YYYY
CONDENSE temp_date NO-GAPS.
IF STRLEN( temp_date ) EQ 10.
o_date0(4) = temp_date6(4).
o_date4(2) = temp_date3(2).
o_date6(2) = temp_date0(2).
ELSE.
error = 'X'.
WRITE : 'Invalid date format.' .
ENDIF.
ENDIF.
IF STRLEN( o_date ) NE '8'.
error = 'X'.
WRITE : 'Invalid date format.'.
ENDIf.
ENDFORM. " f0100_conv_date
Reward if helpful.
Regards,
Harini.S

How to change the Data sources after deploying the application ??

Hi All,
i want to know how to change the Data sources after deploying the application to the application server ???
I'm using Oracle Application Server 10g Release 3 (10.1.3.1.0)

Can you access the Enrprise Manager website of the target Application Server from your location? If so, you can change the datasource in it. If not, yo can bundle the datasource definition in your archive and use that one instead of the one configured in the target OC4J container. Or this will just be the responsability of your customer: whenever you send a new WAR file, they have to modify the datasource if needed and deploy the application?

How to change the text under RECORD WORKING TIME IN ESS.

Hi,
How to change the text under RECORD WORKING TIME in ESS.
Is there any setting at page or iview level?
Please help me.
Regards,
Thirun.

Hi,
If it is standard business package ,then check home page framework
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0e3a488-cdc2-2b10-209b-e01a0ed934b4
Regards
Koti Reddy

How to change the data in a chart using slider bar ?

hi community,
i have issue, i created one SDK extension slider bar based on that i want to change the data in chart.
my requirement is like, i have month and some measures in a chart i want to set month in a slider bar if am moving slider according to that values should be change in chart.

You could try the following.
Pull the month dimension values into an object, where each dimension value is assigned to a "numeric" (air quotes, actually a string) attribute.
Something along the lines of:
var myMonths = new Object();
myMonths["0"] = <month0_key>;
myMonths["1"] = <month1_key>;
Then, you assign the range slider a set of numeric values, from 0 to n, where n is the last attribute in myMonths. When the user changes the slider values and the OnChange is fired, use the numeric values of the current slider positions to get the appropriate range filter values out of myMonths.
I've not tried this yet, so I don't yet know what pitfalls you'd run into.
Cheers,
Dave

How to change the data type in the table ESLL for the field USERF2_NUM ?

Hello Friends,
I have a requirement in which one of the change is to convert the data type of the field 'USERF2_NUM' in the table 'ESLL' from 'QUAN' to 'CHAR'.
How do i do it if i have an access to change it..........i think i should also check the impact of the change if done.
Kindly tell me as my requirement starts with this small change.
Regards,
Rajesh Kumar

Thanks for the reply Sowmya.
I would like to know 2 things.
1. Is it ok to change the data type of the field 'USERF2_NUM ' which is in the table ESLL. from quan to char.
2. The table ESLL already has entries. if we change the data type from QUAN to CHAR what is the effect on the existing entries of the table .
Kindly reply me back.
Thanks & Regards,
Rajesh Kumar

How to change the date value in FM SD_CUSTOMER_HIERARCHY_PATH

Hi,
I have one requirement while creating sales order the pricing herarchy should be
based on the date mentioned in the Delivery date. Generally the pricing hierarchy
happens based on system date.
So how to get the hierarchy based on the date mentioned in the delivery date ?
I analysed in debugging if I change the date field in debugging mode in the function module
SD_CUSTOMER_HIERARCHY_PATH then i am getting the pricing hierarchy based on the desired date
other then system date.
   CALL FUNCTION 'SD_CUSTOMER_HIERARCHY_PATH'
           EXPORTING
                CUSTOMER        = lvf_knvh_kunnr
                DATE            = SY-DATLO -
> Desired Date menioned
                HTYPE           = fif_hityp
                SALES_CHANNEL   = fis_sdorgdata-vtweg
                SALES_DIVISION = fis_sdorgdata-spart
                SALES_ORG       = fis_sdorgdata-vkorg
           IMPORTING
                CUSTOMER_HZUOR = lvf_customer_hizuor
           TABLES
                HPATH           = lvt_hierarchy_partners
           EXCEPTIONS
                HITYP_NOT_EXIST = 1
                NODE_NOT_EXIST = 2
                PARVW_NOT_EXIST = 3
                OTHERS          = 4.
The Field for delivery date I mentioned is RV45A-KETDAT and this value is not appearing in this
position of function module.
Can any one have Idea to change the hierarchy based on the desired date other than system date.
Waiting for kind response.
Best Regards,
Bansidhar

Hi,
I have one requirement while creating sales order the pricing herarchy should be
based on the date mentioned in the Delivery date. Generally the pricing hierarchy
happens based on system date.
So how to get the hierarchy based on the date mentioned in the delivery date ?
I analysed in debugging if I change the date field in debugging mode in the function module
SD_CUSTOMER_HIERARCHY_PATH then i am getting the pricing hierarchy based on the desired date
other then system date.
   CALL FUNCTION 'SD_CUSTOMER_HIERARCHY_PATH'
           EXPORTING
                CUSTOMER        = lvf_knvh_kunnr
                DATE            = SY-DATLO -
> Desired Date menioned
                HTYPE           = fif_hityp
                SALES_CHANNEL   = fis_sdorgdata-vtweg
                SALES_DIVISION = fis_sdorgdata-spart
                SALES_ORG       = fis_sdorgdata-vkorg
           IMPORTING
                CUSTOMER_HZUOR = lvf_customer_hizuor
           TABLES
                HPATH           = lvt_hierarchy_partners
           EXCEPTIONS
                HITYP_NOT_EXIST = 1
                NODE_NOT_EXIST = 2
                PARVW_NOT_EXIST = 3
                OTHERS          = 4.
The Field for delivery date I mentioned is RV45A-KETDAT and this value is not appearing in this
position of function module.
Can any one have Idea to change the hierarchy based on the desired date other than system date.
Waiting for kind response.
Best Regards,
Bansidhar

Photos out of order. How to change the 'Date Taken' date on ipod touch?

Since updating to ios8, some of my camera photos have randomly changed their dates to 2015. Does anyone know how I can change the date on these back so that they appear in the right sequence?

Yes. You can batch change those photos with the Photos->Batch Change->Date menu option. You an add a time differential between every photo so they will be chronologically sorted in the order you put them before changing the date.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Apple Remote Desktop - how to change the date and time server ip address?

Our imacs keep getting out of synch with our Windows Active Directory server and when they do, users can no longer log into the imacs. The imacs this morning were more than 5 minutes fast, for example.
So, we have changed the date and time server on one of our imacs to our internal time server and that works fine. Now I would like to update all of the other imacs using a unix command in ARD. Can anyone tell me how to send this change? For this message, let's say our internal time server is 172.30.100.100

Not a problem. There are a number of other system and network setup commands that you might find useful at some time. From within the Remote Desktop Admin in the Send Unix Command window type:
networksetup -help
systemsetup -help
That will give you lists of the commands, including the one I posted above, with their basic syntax. They're handy to know.
Cheers.

How to change the dates for open enrollment

Hi Experts,
I am implementing ESS BP 1.0 on EP 7.0 SP11 ERP2005. In the benefits and payment workset, there is open enrollment process which is allowed between certain dates. How to change those dates in the backend system?
Thanks!

The open enrollment period dates can be changes under Benefits>Flexible administration>Define administrative parameters.
Thanks

How to change the Data Foundation for an existing Business Element

My Issue:
I have quite a few reports that use the same Business View. The Business View has an under lying Data Foundation that uses a Dynamic Data Connection (DDC). I no longer want to use this DDC because production users are complaining they do not want to have to select a data source each time (multiple times when the report includes sub reports) they run/refresh their reports.
The Holy Grail:
I would like to change the Data Foundation that my Business Element layer is built upon and use another data foundation with identical tables, linking, and fields. The new data foundation would be using a production connection. This solves my immediate issue and has a great side benefit of providing a convenient way to promote reports from development to stage/test, to production and would not require production users to have to select which environment they want their report to run against.
I am logged in to BVM as administrator:
When I look at the Business Element layer Property Browser, I see a Data Foundation Property but is is disabled (such that it can not be changed).
Is there a way to change the Data Foundation that is used by an existing Business Element layer ?
I'd appreciate any help that someone can offer on this topic. Even if it is not possible and someone can shed some light on why this would not work or would not be a good idea, I'd be interested in learning

Technically No the system will not allow you to change as it is involved with many depreciation areas and change is not permitted for control reason.
You only need to retire the asset, reverse the postings, assign correctly and repost the values.

How to change the date generate absence quota(Time Evaluation)

Similar Messages

Maybe you are looking for