How to ... change the default for "patch name" when doing the assemlby?

Hi all,
how to change the default settings for the "patch name" in the assembly step?
By default the name will be set to <trackID>.<timestamp> and I would like to have something else ...
Best regards
and thanks for any help
Michael

I don't think you can - there's nothing in the documentation indicating how you can change the default.  I wouldn't be surprised if there was a configuration file somewhere that contained an assembly name template, but altering it (assuming it exists) would certainly be at your own risk.
You could always open an OSS note against BC-CTS-CMS and ask.

Similar Messages

  • How to change billing information for my annual subscription as the chart through which I was paying

    The option that gives me my brand Subscription error and I can not make changes.

    It solved the problem of changing the credit card for payment of a subcripción.
    thanks
    Date: Wed, 18 Jul 2012 14:22:59 -0600
    From: [email protected]
    To: [email protected]
    Subject: How to change billing information for my annual subscription as the chart through which I was paying
        Re: How to change billing information for my annual subscription as the chart through which I was paying
        created by David__B in Adobe Creative Cloud - View the full discussion
    Hi Beto, What information are you attempting to change (address, credit card)? What is the error message you are getting? Would it be possible to post a screen shot of the error? -Dave
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4565913#4565913
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4565913#4565913. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Creative Cloud by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How to change Encore Default for source footage from 29.97 to 23.97?

    Hello,
    I'm exporting from Premiere in 24p, downrezzing from H.264 HD.  MY ORIGINAL FOOTAGE is also in 24p.
    Here are my current Encore defaults:
    As you can see, the DEFAULT for my source footage is 29.97 fps. 
    How can I change that default to 23.97?  What are the steps?
    I just can't seem to make it happen.
    Thanks!
    Matt

    Hi Jim,
    Attached are two screen shots that demonstrate that I am working in 24p within Premiere Pro.  As such, I have no idea why Encore would be CLAIMING that I am working within a 29.97i space.
    But this could be important, yes?
    Thanks!
    Matt Dubuque

  • How to set PSD as the default for Ctrl-S when saving a layered DNG for the first time?

    Something has changed in my settings!! My Edit>Preferences>File Handling is checked to require Ask Before Saving Layered TIFF Files.
    Today I hit Ctrl-S with a layered DNG and it saved it as an Edit.tif
    What do I need to change so that the default on Ctrl-S from a Layered DNG is a Layered PSD?
    Thanks,

    Similar question. When I hit Ctrl-Alt-S, the default is TIFF; is there a way to make the default PSD?

  • How to change availability date of a batch when doing GR for order in MIGO

    Hi all,
    We are not able to find any exit or BADI to change availability date of batch when doing goods receipt for a order.
    Exits and BADIs are available for other dates but not for availabiliy date.
    One Exit that is available for available date but is not triggered while doing GR for an order.
    Please let me know how to achieve this.
    Thanks and Regards,
    Taranam

    Hi,
    You can use the remodelling here with the option " Replace Characteristics" with Customer exit. It will allow you to write an exit and change the value. Find more here:
    http://www.scribd.com/doc/7882193/Remodeling-in-BI-70-Using-Customer-Exit
    Thanks...
    Shambhu

  • HT5100 I want to turn off the autoplay feature.  I'd like ITunes to stop after one podcast.  The latest version has changed the default for playback.

    I want to turn off the autoplay feature in iTunes.  I'd like iTunes to stop after one podcast.  The latest version has changed the default for playback.

    Make sure that the system time and date on your computer are set correctly.
    If "I Understand the Risks" is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
    You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
    *Click the link at the bottom of the error page: "I Understand the Risks"
    Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
    *Click the "View..." button and inspect the certificate and check who is the issuer of the certificate.
    You can see more Details like intermediate certificates that are used in the Details pane.
    Note that some firewalls monitor secure (https) connections and send their own certificate instead of the website's certificate.

  • How to restrict the GR for Production Order when Goods Issue is not done

    Hi Gurus
    How to restrict the GR for Production Order when all the required components for production order are not issued with all required quantity. Even for partial issue system should not allow GR with 101. The user status with RMWA, RMWF & CGFB is not working.
    Pls suggest best solution.
    Abhijit.

    Hi,
    You can club together the GI nad GR at the time of confirmation..
    I.e Backflush for the components and auto GR for the Product.
    So that you can stream line the Process.
    The best Option would be to use the User Exit:
    Enhancement - MBCF0002
    Functional Module - EXIT_SAPMM07M_001
    Include - ZXMBCU02
    Refer below link for further details..
    How to stop the goods receipt before issueing the goods for production orde
    Regards,
    Siva

  • What's the default mysql database name in Crystal Report Server XIR2

    Hi Experts,
    I am upgrading Crystal Report Server from XIR2 to XI3.1.
    I need to know the default mysql database name when upgrading.
    Anyone knows?

    Hi,
    In XI3.1, when BOE installed with default mySQL DB then the installer creates a DataSource with name "Business Objects CMS".
    And the DB name will be "BOE120".
    I guess in XIR2 DB name will be ''BOE115".
    Also, if you launch the CMC admin page then in the settings link the DB info will be displayed.
    -Noor.
    Edited by: Nooreazam Sayyad Abdullas Peerzade on Dec 15, 2010 1:54 PM

  • How do I changing the default WIKI Server name on OS x Lion Server?

    How do I changing the default WIKI Server name on OS x Lion Server? Enterprise solutions suggested I post this question here to get a direct answer. I have searched everywhere... This would be the META TAG On the top of browsers...

    I went looking for this answer, to no avail.
    Solution I used:
    step 1 - Navigate to the folder /usr/share/collabd/coreclient/locales/en.lproj/ and open the only file there called default.strings.
    step 2 - somewhere around lines 74 & 164 you will see the default title "OS X Lion Server". I'm sure only one of the is required to be changed to adjust the title on the window, but I changed both to my desired title. Save and close. If asked for authentication, enter you administrator details.
    step 3 - restart the server (or wiki service may work too)
    step 4 - done and your Wiki welcome page should show the new title
    Finally I have a bookmark that means something by default.
    Hope this helps

  • The back button no longer works. I have disabled all add-ons, rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

    the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

  • How to use the default database service name on creating procedure for data

    how to use the default database service name on creating procedure for datagaurd client failover ??? all oracle doc says create a new service as below and enable at DB startup. but our client is using/wanted database default service to connect from application on the datagaurd environment (rac to non rac setup).please help.
    Db name is = prod.
    exec DBMS_SERVICE.CREATE_SERVICE (service_name => 'prod',network_name =>'prod',failover_method => 'BASIC',failover_type => 'SELECT',failover_retries => 180,failover_delay => 1);
    says already the service available.
    CREATE OR REPLACE TRIGGER manage_dgservice after startup on database DECLARE role
    VARCHAR(30);BEGIN SELECT DATABASE_ROLE INTO role FROM V$DATABASE;
    IF role = 'NO' THEN DBMS_SERVICE.START_SERVICE('prod');
    END IF;
    END;
    says trigger created, but during a swithover still the service is listeneing on listener.
    tns entry.
    prod =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (LOAD_BALANCE = YES)
    (ADDRESS = (PROTOCOL = TCP)(HOST = prod1)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = prod2)(PORT = 1521)) ---> primary db entry
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = proddr)(PORT = 1521)) --> DR DB entry
    (CONNECT_DATA =
    (SERVICE_NAME = prod)
    thanks in advance.
    Edited by: 854393 on Dec 29, 2012 11:52 AM

    Hello;
    So in the example below replace "ernie" with the alias you want the client to use.
    I can show you how I do it :
    First an entry need to be added to the client tnsnames.ora that uses a SERVICE_NAME instead of a SID.
    ernie =
    (DESCRIPTION =
        (ADDRESS_LIST =
           (ADDRESS = (PROTOCOL = TCP)(HOST = Primary.host)(PORT = 1521))
           (ADDRESS = (PROTOCOL = TCP)(HOST = Standby.host)(PORT = 1521))
           (CONNECT_DATA =
           (SERVICE_NAME = ernie)
    )Next the service 'ernie' needs to be created manually on the primary database.
    BEGIN
       DBMS_SERVICE.CREATE_SERVICE('ernie','ernie');
    END;
    /After creating the service needs to be manually started.
    BEGIN
       DBMS_SERVICE.START_SERVICE('ernie');
    END;
    /Several of the default parameters can now be set for 'ernie'.
    BEGIN
       DBMS_SERVICE.MODIFY_SERVICE
       ('ernie',
       FAILOVER_METHOD => 'BASIC',
       FAILOVER_TYPE => 'SELECT',
       FAILOVER_RETRIES => 200,
       FAILOVER_DELAY => 1);
    END;
    /Finally a database STARTUP trigger should be created to ensures that this service is only offered if the database is primary.
    CREATE TRIGGER CHECK_ERNIE_START AFTER STARTUP ON DATABASE
    DECLARE
    V_ROLE VARCHAR(30);
    BEGIN
    SELECT DATABASE_ROLE INTO V_ROLE FROM V$DATABASE;
    IF V_ROLE = 'PRIMARY' THEN
    DBMS_SERVICE.START_SERVICE('ernie');
    ELSE
    DBMS_SERVICE.STOP_SERVICE('ernie');
    END IF;
    END;
    /lsnrctl status - should show the new service.
    When I do this the Database will still register with the listener. I don't give that to the clients. That one will still be available but nobody knows about it. Meanwhile "ernie" moves with the database role.
    So in my example the default just hangs out in the background.
    Best Regards
    mseberg
    Edited by: mseberg on Dec 29, 2012 3:51 PM

  • Changing the default logical system names for adaptive RFC models

    Hello,
    When I create an Adaptive RFC model the dialog that asks me to specify the model name, package, source folder, etc. has default values in the "Default logical system name for model instances" and "... RFC metadata".
    I know I can type in another name there but I'd like to change the default name to something that fits our naming conventions. Can I change that? If so, can someone tell me where?
    Thanks in advance!
    David.

    Suresh,
    Thank you for your response. However, that is not what I was looking for. Sorry if my post was not clear.
    I knew that I could change it AFTER the import. I also know that I can type in something else besides the default DURING the import.
    What I am asking is if there is a way to change some configuration setting so that the 'default' that comes up in the drop down DURING the import is something different than what comes 'out-of-the-box' with NWDS.
    Hope that clears up what I'm looking for.
    David.
    Message was edited by:
            David Z. Pantich

  • How do I change which application is the (default) for a given file type?

    For .pdf files, I have set the application behaviour to "Always Ask", because sometimes I want to open the pdf, sometimes I want to save it. So far so good.
    Now, when I want to open the .pdf, I have added an application to the dropdown list, so now I have "Adobe Reader 9 (default)" and "okular".
    The problem is this: I *never* open using Adobe Reader. I always want to use okular, but Adobe Reader always appears first on the list, as it is the 'default'. This means I always have to click on the dropdown and select "okular", i.e. an extra step every time I want to open a pdf.
    How do I change which application is the default?

    Yes, I know that. That was the first sentence of my question, but it is not the problem I have.
    I want to change which application is the (default) for a given file type, and this cannot be done from the settings.

  • How to configure a map of patches names of my midi device in order to insert program changes from Logic?

    How to configure a map of patches names of my midi device in order to insert program changes from Logic?

    Thomjinx wrote:
    You can usually use a patch editor-librarian program like Sound Diver or MidiQuest to copy and paste the patch names (one bank at a time) into the patch name list of a multi-intsrument object in the environment.
    That's what I do.  Works like a charm.
    Cheer,
    Thomjinx
    "My first copy of Logic came on Floppy disks"
    And you will need to setup bank change commands for your particular instrument, if it does in fact have several banks of internal patches. Logic comes with a selection of bank change commands, one of them will almost always work.
    My first copy of Logic came on floppies, two of them I think and was MIDI only, moved up to Logic_Audio at version 3.0 I think.

  • How to change the default BC image that shows in the address bar?

    Does anyone know how to change the default BC image that shows in the address bar? I want to swap it out so the client logo shows next to their URL.
    Thank you!

    Hi,
    If you are trying to change the favicon for your site,
    You can do it from Site Manager-> Page template -> Default Template
    Look for the code   <link type="image/x-icon" href="/Path for your image" rel="icon" />, and Click save.
    Now where you will use this template, it will display your favicon for that webpage instead of BC favicon. You can define it on Page directly if you are not going to use template.
    Please let me know if you have any doubt.

Maybe you are looking for