How to change the default password file's name and path when the database created?

how to change the default password file's name and path when the database created?
null

Usage: orapwd file=<fname> password=<password> entries=<users>
where
file - name of password file (mand),
password - password for SYS and INTERNAL (mand),
entries - maximum number of distinct DBA and OPERs (opt),
There are no spaces around the equal-to (=) character.

Similar Messages

How to Change Outlook Default Folder for Insert-Attachment and Save Email/Attachemnt while Outlook is open (VBA)

Hello,
Office 2010 32bit, VBA
Is it possible to programmatically do the above while Outlook is running? If so, I'm hoping to make that change from a Word macro.
I tried tinkering with the reg key and that doesn't work because it appears Outlook only respects it at startup time. Similary changing Word File-options-location of documents is respected only when Outlook starts.
I'm looking to seamlessly keep Outlook's default folder in sync with Word's default folder as the users change working folders in Word, which they do many times per day (and they chose the folder among a couple of thousand possibilities).
I'm hoping there is a difficult-to-find Outlook object I can manipuate to get to the end result. IF there is such an Object I have been unable to find it.
Many thanks!
Julie

Hi Julie,
Based on my research, I think outlook object model doesn’t provide the way to change the default folder for insert attachment and save email/attachment.
The way to change it is that we need to modify the registry setting and the outlook app should be restart.
# How to set the default attachment folder in Outlook
https://support.microsoft.com/kb/252732?wa=wsignin1.0
You may create the add-in to custom these actions (e.g. attach attachment, save email)
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What is the default password on Pet Store 1.3 when rebuilt?

I am unable to log into either the administrator client or the receiver application after rebuilding the WebLogic Server Pet Store Application. Neither jps_admin/admin nor rsvr/rcvr works. I saw a post referencing security.xml, but that file does not appear to be in this package
The default passwords worked when I used just the Pet Store template and prebuilt application, but the admin client would wait forever trying to get data, even when the client was ran from the same box as the server.
I am running WebLogic Server/Express 7.0 with SP7 for RHEL on Red Hat Enterprise Linux 4, Update 3 x86.
What should the default login names be? Or even better, if someone has seen the admin client unable to get data, how do you solve that?

On my painfully new 11.1.2 install, and per the install instructions, the username and password are as follows:
epm_admin
whatever you set up -- (As I only ever use one of three different ones when I do installs, it wasn't too hard to go through all of the possibilities)
See: http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install/frameset.htm?webLogicDomainName.html
Regards,
Cameron Lackpour
Edited by: CL on Aug 3, 2010 11:14 AM

How can I find the name and path of the host html page

Hi all,
I want to make a banner using flash. This banner will be
included in several pages in several domains.
So, I want to count the clicks and store statistical data,
calling an asp, and I want to get the host HTML page name which
includes my banner.
How can I do this?
Thanks in advance

or you can use the localConnection class inside of flash....
it will return the domain name for you.
var lc:LocalConnection = new LocalConnection();
trace(lc.domain());

Get the name and path of the calling JSP

Hi all,
I have a code structure like this
class MyBaseServlet extends HttpServlet{
doPost(){processRequest();}
doGet(){processRequest();}
processRequest(req, resp){}
myPrivateMethod(req,resp){
//I want the name of the JSP which invoked the servlet that extends this(MyBaseServlet) here
class MySerlvet extends MyBaseServlet{
processRequest(req, resp){}
I have a JSP which submits in the <FORM> action calls MyServlet. Since MyServlet extends MyBaseServlet, and this has the doPost() and doGet() methods, the control goes here first, and then since MyServlet has overridden the processRequest() method , the control comes here.
My query isthat, while in MyBaseServlet (either in doPost() or doGet(), say I call myPrivateMethod(), is there any way here, inside myPrivateMethod() to get the name of the JSP which called MyServlet.
Note:
The constraint here is that we are not in a position to include any code into either the JSP or MyServlet. I'm running this in a J2EE environment on Websphere.
Thanks in advance.

You can use the methods of the HTTPServletRequest class to get the URI/URL info...for example request.getRequestURI() /URL()/ServletPathInfo()
http://java.sun.com/products/servlet/2.3/javadoc/javax/servlet/http/HttpServletRequest.html

I get the message "Cannot connect to the server. Check server name and address" when I try to scan.

I have printed ouut the HP Network Configuration Page. I don't understand too much of this stuff but I would love to be a ble to use the scanner without having to buy another device. Anyone got any resolution before I lose my mind?

The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

TS1424 When I touch the secret passages icon to play the game it starts to load and then when the progress bar completes the game crashes and goes back to windows. It's very frustrating as I really enjoy this game but if it's not rectified I might have to

When I touch the secret passages icon to load it the progress bar completes and then the game won't start it goes back to windows. I really like this game but if it carries on I might have to delete it sadly

Have you checked to see if there is an Update for the game ?
Also... Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Changing the name and path of Targets, Exec, Products, etc

I want to change the name and path of the Products, Targets, and Executables, but the text box in the 'info' window won't let me edit, and the choose buttom is grayed out.
Any ideas?

I just did this yesterday... and it's fairly confusing trying to figure out what all to change.
You can change the name of your target and executable by selecting them in the "Groups & Files" list and then selecting "File -> Rename" from the menubar.
It appears as if you can also select your Product and rename it in this way too... but (in my case) doing that didn't seem to actually rename the final app that's produced.
In order to rename the actual final application I believe you must select your target click the "Info" button... in the Info window select the "Build" tab. Scroll down until you find the "Product" entry. Double-click that and change it's name. Note that you may need to change the product name for each of your build configurations (ie Debug & Release).
Steve

Separating file name and path

Hi,
I need to separate the file name and path of the file which I am uploading from my BSP appl.I am using SO_SPLIT_FILNAME_PATH ,but it is not working because this fm identifies '\' only from GUI front end.
How do I separate the file name and path in BSP ?
Regards,
Ananya

Assuming that you are using File Upload tag for file upload:
DATA: fileUpload TYPE REF TO CL_HTMLB_FILEUPLOAD.
fileUpload ?= CL_HTMLB_MANAGER=>GET_DATA(
                       request = request
                       id      = 'myUpload'
                       name    = 'fileUpload' ).
file_name      = fileUpload->file_name.
file_mime_type = fileUpload->file_content_type.
file_length    = fileUpload->file_length.
file_content   = fileUpload->file_content.
Data : filepath type string,
       filename type string,
       t1 type string.
filepath = file_name .
while filepath CA ''.
split filepath at '' into t1 filename.
endwhile.
In my sample code above, filename attribute will contain the name of the file uploaded.
Hope this solves the problem.
Regards,
Ravikiran.

How to change the Default Password on AP1131AG

Hi all :
I tried to change the default password Cisco to other by command line but the password cannot work out.
The command line I used are as below :
AP#conf t
Enter configuration commands, one per line. End with CNTL/Z.
AP(config)#enable pass
AP(config)#enable password 4dMINO123 ?
LINE    <cr>
AP(config)#enable password 4dMINO123
AP(config)#exit
AP#wr
*Mar 1 04:39:23.902: %SYS-5-CONFIG_I: Configured from console by console
Building configuration...
[OK]
AP#exit
This still cannot cahnge. Below I do again below commands :
AP(config)#enable secret
% Incomplete command.
AP(config)#enable secret ?
0      Specifies an UNENCRYPTED password will follow
5      Specifies an ENCRYPTED secret will follow
LINE   The UNENCRYPTED (cleartext) 'enable' secret
level Set exec level password
AP(config)#enable secret 5
% Incomplete command.
AP(config)#enable secret 5 ?
LINE The ENCRYPTED 'enable' secret string
AP(config)#enable secret 5 LINE
ERROR: The secret you entered is not a valid encrypted secret.
To enter an UNENCRYPTED secret, do not specify type 5 encryption.
When you properly enter an UNENCRYPTED secret, it will be encrypted.
AP(config)#enable secret LINE
AP(config)#exit
AP#
*Mar 1 04:40:53.021: %SYS-5-CONFIG_I: Configured from console by console
AP#
AP#exit
After that when I access with >en again as below with correct password of 4dMINO123 and it always fails as below :
Can anybody help to provide correct way of changing the default password of Cisco to another password? Many thanks!
AP con0 is now available
Press RETURN to get started.
AP>en
Password:
Password:
Password:
% Bad secrets
AP>en 0
AP>en 5
% No password set
AP>en 15
Password:
Password:
% Password: timeout expired!
Password:
% Bad secrets
AP>
AP>
AP>en
Password:
Password:
Password:
% Bad secrets
thanks and best regards,
tangsuan

Hi, I have even the worst problem,
that seems probably to to be never asked on Internet. After quick learning how to reset this creapy device, I can't get by no means the enable password in default config for this box, having read everywhere from Cisco guide through community pages to Google pages.. NOWHERE.
Question is : what else except Cisco, cisco, root, password... can solve this stupid issue?!? I expect some guru from responsible AP BU to answer this with definite answer, or someone from Cisco having mercy with me to contact such guy(s).
Here is my desperate situation :
Nothing from this page helped :
http://www.cisco.com/en/US/partner/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml#reset_ap_newer
Situation after hard reset:
Xmodem file system is available.
flashfs[0]: 26 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6879232
flashfs[0]: Bytes available: 9119744
flashfs[0]: flashfs fsck took 43 seconds.
Base ethernet MAC Address: 00:22:55:9f:fc:a0
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
button pressed for 1 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
Loading "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"...#########################################################################################################################################################################
File "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
Image text-base: 0x00003000, data-base: 0x0035E440
Initializing flashfs...
flashfs[1]: 26 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 6879232
flashfs[1]: Bytes available: 9119744
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC12354426
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1238Q0HK
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
Press RETURN to get started!
*Mar 1 00:00:08.354: %CDP_PD-4-POWER_OK: Full power - AC_ADAPDOWN: Line protocol on Interface FastEthernet0, changed state to up
Press>en
Password:
Password:
Password:
*Mar 1 00:00:27.393: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
% Bad secrets
Press>en
Password:
Password:
Password:
% Bad secrets
Press>
*Mar 1 00:00:36.530: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.1.2, mask 255.255.255.0, hostname Press
Press>en
Password:
Password:
Press>sho ver
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
Press uptime is 17 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC12354426
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1238Q0HK
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
Configuration register is 0xF
Press>

How to change the default "Safe" files in Safari?

I would really appreciate if anybody could teach me how to change the default "Safe" files using AppleScripts, Folder Actions or .plist files. I really would like to have some files to open automatically after download, specially .pps files, and safari doesn't recognize such files as "safe". I tried to find out reading the help files but got lost.
I posted a reply in an old topic for somebody who seemed to know, but it was not related to that topic, so I decided to open a new one.
I'll be gratefull for any help. Thanks.

Hi MDRC,
Have a read of [this topic|http://discussions.apple.com/thread.jspa?threadID=1237961] to see if that helps.

How can I get back the default system files icons to my fles?

Hello,
After installing an application like FontExplorer, all my fonts got it's icon.
I went to a font, selected and did get info, I tried to delete the icon but could not.
I know the default icons for OTF fonts and an italic O, half green, half black.
How can I get those Icons back,
Or in general,
When files gets an application icons, how can I restore the default icons for files?
Thank you
Shlomit

Icons in the Get Info pane can be changed back to the original icon by clicking on the icon once, to highlight it, and then pressing Control X (for cut).
But in your case the font icon is probably more due to the association with the application selected to open it with, ie FontExplorer. So with the Get Info pane open for a selected font type you need to change which application you use to open it with. For example, if you select one of the OTF fonts and do a Get Info, in the Open With pane it will show FontExplorer. Change this to Font Book and it should change its default icon.

Outlook 2010 changing the default data file

how to change default data files. outlook will not allow me to make a change to the default data file. iu want to make another file the default

What the type of mail account you use?
Please go to File > Account setting > Data file > Select your account > Set as Default.
Thanks.
Tony Chen
TechNet Community Support

Changing the default password when configuring.

Hi,
can anyone tell me how to change the default password and username when you are first configuring your router? You know when you go to http://192.168.1.1/?
I know the default password is admin and there is no user name but I would like to change that so that not just anyone who knows the default password can see the wep incryption I have in place. Please can someone help?

What router are you using?
On most Linksys routers, you cannot change the User Name. You must leave it blank.
To change the Password, login to the router, and go to the "Administration" tab. You should find the Password somewhere nearby.

How do I change the size of file menu's and tool icons in Photoshop' opening page.

How do I increase or change the size of file menu's and tool icons on the opening page/worksheet of Photoshop? The File Menu drop down commands read properly at a comfortable size. I am not sure how I accomplished this, but everything I have tried has no effect on the other page items.

Hello, you can change most of Photoshop's interface text by going to preferences>interface>UI font size.
For the size of the top menus and the whole interface, there is no function to do that for the moment. I suggest to vote on this thread: http://feedback.photoshop.com/photoshop_family/topics/problem_with_hi_res_monitors

How to change the default password file's name and path when the database created?

Similar Messages

Maybe you are looking for