How to change the Default Password on AP1131AG

Hi all :
I tried to change the default password Cisco to other by command line but the password cannot work out.
The command line I used are as below :
AP#conf t
Enter configuration commands, one per line. End with CNTL/Z.
AP(config)#enable pass
AP(config)#enable password 4dMINO123 ?
LINE    <cr>
AP(config)#enable password 4dMINO123
AP(config)#exit
AP#wr
*Mar 1 04:39:23.902: %SYS-5-CONFIG_I: Configured from console by console
Building configuration...
[OK]
AP#exit
This still cannot cahnge. Below I do again below commands :
AP(config)#enable secret
% Incomplete command.
AP(config)#enable secret ?
0      Specifies an UNENCRYPTED password will follow
5      Specifies an ENCRYPTED secret will follow
LINE   The UNENCRYPTED (cleartext) 'enable' secret
level Set exec level password
AP(config)#enable secret 5
% Incomplete command.
AP(config)#enable secret 5 ?
LINE The ENCRYPTED 'enable' secret string
AP(config)#enable secret 5 LINE
ERROR: The secret you entered is not a valid encrypted secret.
To enter an UNENCRYPTED secret, do not specify type 5 encryption.
When you properly enter an UNENCRYPTED secret, it will be encrypted.
AP(config)#enable secret LINE
AP(config)#exit
AP#
*Mar 1 04:40:53.021: %SYS-5-CONFIG_I: Configured from console by console
AP#
AP#exit
After that when I access with >en again as below with correct password of 4dMINO123 and it always fails as below :
Can anybody help to provide correct way of changing the default password of Cisco to another password? Many thanks!
AP con0 is now available
Press RETURN to get started.
AP>en
Password:
Password:
Password:
% Bad secrets
AP>en 0
AP>en 5
% No password set
AP>en 15
Password:
Password:
% Password: timeout expired!
Password:
% Bad secrets
AP>
AP>
AP>en
Password:
Password:
Password:
% Bad secrets
thanks and best regards,
tangsuan

Hi, I have even the worst problem,
that seems probably to to be never asked on Internet. After quick learning how to reset this creapy device, I can't get by no means the enable password in default config for this box, having read everywhere from Cisco guide through community pages to Google pages.. NOWHERE.
Question is : what else except Cisco, cisco, root, password... can solve this stupid issue?!? I expect some guru from responsible AP BU to answer this with definite answer, or someone from Cisco having mercy with me to contact such guy(s).
Here is my desperate situation :
Nothing from this page helped :
http://www.cisco.com/en/US/partner/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml#reset_ap_newer
Situation after hard reset:
Xmodem file system is available.
flashfs[0]: 26 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6879232
flashfs[0]: Bytes available: 9119744
flashfs[0]: flashfs fsck took 43 seconds.
Base ethernet MAC Address: 00:22:55:9f:fc:a0
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
button pressed for 1 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
Loading "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"...#########################################################################################################################################################################
File "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
Image text-base: 0x00003000, data-base: 0x0035E440
Initializing flashfs...
flashfs[1]: 26 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 6879232
flashfs[1]: Bytes available: 9119744
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC12354426
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1238Q0HK
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
Press RETURN to get started!
*Mar 1 00:00:08.354: %CDP_PD-4-POWER_OK: Full power - AC_ADAPDOWN: Line protocol on Interface FastEthernet0, changed state to up
Press>en
Password:
Password:
Password:
*Mar 1 00:00:27.393: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
% Bad secrets
Press>en
Password:
Password:
Password:
% Bad secrets
Press>
*Mar 1 00:00:36.530: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.1.2, mask 255.255.255.0, hostname Press
Press>en
Password:
Password:
Press>sho ver
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
Press uptime is 17 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC12354426
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1238Q0HK
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
Configuration register is 0xF
Press>

Similar Messages

How to change the default password file's name and path when the database created?

how to change the default password file's name and path when the database created?
null

Usage: orapwd file=<fname> password=<password> entries=<users>
where
file - name of password file (mand),
password - password for SYS and INTERNAL (mand),
entries - maximum number of distinct DBA and OPERs (opt),
There are no spaces around the equal-to (=) character.

How to change the default admin password for IAS/UDDI

Using "OracleAS UDDI Registry" 10g Release 2 (10.1.2)
http://docs.oracle.com/cd/B15904_01/web.1012/b14027/regwsuddi.htm
How to change the default password
ias_admin/ias_admin123
http://xxx.xx.xxx.xx/uddi/publishing

Hello NJ,
I tried your solution and its a very good workaround for the workbooks stored in the Database, but when i open workbooks from file system then Discoverer defaults the export path to the Directory from where we have opened the workbook.
My clients are having most of their workbooks stored in File system & stored at different locations. So i wonder if there is just one common solution if possible?
Thanks

Changing the default password when configuring.

Hi,
can anyone tell me how to change the default password and username when you are first configuring your router? You know when you go to http://192.168.1.1/?
I know the default password is admin and there is no user name but I would like to change that so that not just anyone who knows the default password can see the wep incryption I have in place. Please can someone help?

What router are you using?
On most Linksys routers, you cannot change the User Name. You must leave it blank.
To change the Password, login to the router, and go to the "Administration" tab. You should find the Password somewhere nearby.

How to change the default apex port

hi,
i am installed apex4.0 in EBS R12 DB with HTTP Server method. my apex is running from application server 10g and default port is 7777.
URl: http://hostname:7777/pls/apex
My EBS R12 running on http://hostname:8007.
is it possible to change the apex port to EBS Apache port(8007) in R12 and finally i want to change above URL like this
Before change : http://hostname:7777/pls/apex
After Change : http://hostname:8007/pls/apex
Thanks in advanace....

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How to change the default Path of Prompt Played by MicroApp

Hi
I need to store all the Self Service application prompts in dedicated Media Server. I can modify location of all the Media files by passing the related URL form CVP application, however I need to know how to change the default location of Prompt file played by Play Media Microapplication in ICM Scripting.
Currently the default location taken by Play Media Micro App is the Media _Server.variable path set for VXML Server location while I have a separate Media Server.
Please advice how we can customize the MicroApp Media path.
regards
Kapil Kumar

Hi Kapil,
Try this in your ICM script, define set variables i.e.
set Media Server= ip address of media server
set Locale = en-us
set input Type = DTMF only
set App Media Lib = " you new location i.e. test "
So, the application path will be
http://media server ip address/en-us/test
hope this helps.
Cheers

How to change the default SSH port on Cat 6500 WS-SUP720-3B

I have been net searching this question and I find answers relative to other Cisco products but not for the 6500 series. We are running
entservicesk9_wan-mz.122-18.SXF17a.bin and would like to know how to change the default SSH listening port..
Thanks in advance..

Hi Neil,
Normally this is achieved via the "ip ssh port rotary " but unfortunately, this command is not implemented on your platform so ssh will only work on port 22.
Regards,
Nicolas

How to change the Default login script and the USER login script in Netware3.12

I need to cut down the disk map from Neware 3.12 in Win98 client's PC.
please tell me
how to change the Default login script and the USER login script in
Netware3.12 ?
Or is there any other ways to do this thing?
Thanks a lot!

On 4/6/2006 [email protected] wrote:
> how to change the Default login script and the USER login script in
> Netware3.12 ?
Please repost in the discontinued.forums.
Edison Ortiz
Novell Product Support Forum SysOp
(No Email Support, Thanks !)

How to change the default database charset to ISO8859-1?

Hi all,
I have created a table with a nvarchar field to store string, may i now how to change the default NLS charset to ISO88591 charset?
Thanks in advance.
chin.

Thank you!
I will try later!
But,who can tell me more detail !
thx

How to change the default time?

when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

Please see the following link for information on configuring the interdigit timeout.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
Hope this helps. If so, please rate the post.
Brandon

How to change the default currency in CJ32 and CJ33

Dear all,
As required by the user, I want to know how to change the default currency from controlling area currency to object currency in TCODE CJ32 and CJ33. Currently, the controlling area currency will be defaulted in the field "Views in".
Could any one help me? Points will be awarded.
Thank you.
Christina.
Edited by: Virendra Pal on May 5, 2010 8:34 AM

Hi Christiana ,
Once you are in tcode CJ30 / CJ32 , Enter either Project definition or WBS element and this shall take you to the Budget screen and once you are here you can find a drop down with two options .One is Controlling are currency and the other one is Object currency.
Since the Currency is set to Object currency in OPS9, System shall allow the budget values in Object currency and if the user wants to see the same values in Controlling are currency ,then the user needs to view the values in Controlling are currency using the drop down .
Regards
Judy

How to change the default "Safe" files in Safari?

I would really appreciate if anybody could teach me how to change the default "Safe" files using AppleScripts, Folder Actions or .plist files. I really would like to have some files to open automatically after download, specially .pps files, and safari doesn't recognize such files as "safe". I tried to find out reading the help files but got lost.
I posted a reply in an old topic for somebody who seemed to know, but it was not related to that topic, so I decided to open a new one.
I'll be gratefull for any help. Thanks.

Hi MDRC,
Have a read of [this topic|http://discussions.apple.com/thread.jspa?threadID=1237961] to see if that helps.

How to change the default window size display font size on Lync 2013 main window?

Hi champs,
Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
Thanks,

Hi,
Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
If not, as I know, there is no natural way to change it.
If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How to change the default port of webdispatcher

Hello Everyone,
We wish to know to how to change the default port of SAP webpatcher port from 81$$ to 80.
Appreciate your response.
Thanks,
Vadi

Hello Vadi
you have to change the PORT value in your profile parameter from 81$$ to 80
icm/server_port_0 = PROT=HTTP,PORT=81$$ to
icm/server_port_0 = PROT=HTTP,PORT=80
Also, in SMICM, then change http service port and activate it and above parameter will require SAP restart
$$ is used generally to accomodate multiple port services running in SMICM and so as to avoid the parameter setting according to instance number of any system.
thanks
Bhudev

How to change the default structure when exporting data in CSV format?

Hello,
can some one tell us how to change the default structure in CRM when exporting lists in CSV format (with Option "Always use unformatted list format (CSV) for download" ? Because we want to add a new structure for our own -is it possible ?
If it is possible where can we find these structure ? In the blueprint customizing ?
Thank you very much,
Christian

There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information

How to change the Default Password on AP1131AG

Similar Messages

Maybe you are looking for