How to change the defrag times

Can you change the defragmentation times because i dont want to leave my laptop on all night?

MartyFromTauranga wrote:
Can you change the defragmentation times because i dont want to leave my laptop on all night?
There is no need to leave the MBook on over night. There are a couple of clean-up-scripts starting if the system is idle (cpu usage is under a specific value) and if system starts up / shoot down.
If you (like I do) let the system run for weeks, by only putting the Mac to sleep state, it could be necesary to let the Mac run to idle state (first close all unneeded applications) every two weeks or so for a while.
The HFS+ filesystem needs no "defrag" as HFS+ optimizes the filestructure "on the fly" when deleting or adding files to the drive.
HFS+ uses a number of optimizations to the allocation algorithms in an attempt to defragment files while they are being accessed without a separate defragmenter.
If (very unlikely in normal operations) the filesystem does become fragmented, the only way to defragment it is to use a 3rd Party tool; or to wipe the hard drive completely and install the system from scratch.
Cheers - Lupunus

Similar Messages

How to change the default time?

when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

Please see the following link for information on configuring the interdigit timeout.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
Hope this helps. If so, please rate the post.
Brandon

How to change the system time in (E-Business Suite)

Hi,
I need to change the system timings in E-Business Suite.
My Database & Application is on different nodes..
How could i change system timings on both...
Thanks,
Alig

Alig,
Changing the OS date/time will have no impact on the data (except for the scheduled jobs at the database and the OS levels). As mentioned in the threads I referenced above, you have to stop the application/database, change the date/time at the OS level, and start the application.
The application is just an interface which connects to the database, so it gets all the data from the database server. However, if you want to change the date/time it has to be done on both nodes (stop all the services first as mentioned above).
Btw, what is the point of changing the date/time because of Ramadan? The business requirement of your client does not make sense (how does it differ from the application/database perspective if you start working at 9:00 AM instead of 7:00 AM for example)?
The steps in the document should be enough, and if you do not trust any of the replies here you could simply log a SR and confirm this with Oracle support.
Thanks,
Hussein

On iCal,how to change the travel time mode from car to foot?

on iCal (Mavericks), how to change the traveltime mode before an event ? i only have the "time" choice with "5 min, 15 min, 30 min, 1 hour, 2 hours". I would like to choose "foot/walking" , "car" or "Train/bus".

America is only one of 197 countries in the world. So if you do not use a bike, your feet or public services to travel so, maybe 196 other countries do it :-)

How to change the screen time on 2330c.....

is there any option to change the screen time from center to a top end.....?
Solved!
Go to Solution.

Date and timeSelect Menu > Settings > Date and time.To set the date and time, select Date and time settings.To set the formats for date and time, select Date and time format settings.To set the phone to update the time and date automatically according to the current
time zone, select Auto-update of date & time (network service).
here is online guide which may contain more info
http://nds1.nokia.com/phones/files/guides/Nokia_2330_classic_en.pdf
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

How to change the date time format in jsp

Hello Sir,
I am trying to convert the date from one format into another format.
In SQLServer one fields type as datetime.
when i tried to display it in jsp with String variable it shown like below,
2006-08-16 09:11:23.0
how to format this value as
Wed, Aug 16, 2006 09:11 AM
my code is
java.text.SimpleDateFormat fmt= new java.text.SimpleDateFormat("EEE, MMM d, yyyy K:mm a ");
fmt.format(string value fetch from dtabase field);
Plz provide me the solution asap. very urgent request.
Regards
venki.

Hello Sir,
I am trying to convert the date from one format into
another format.
In SQLServer one fields type as datetime.
when i tried to display it in jsp with String
variable it shown like below,
2006-08-16 09:11:23.0
how to format this value as
Wed, Aug 16, 2006 09:11 AM
my code is
java.text.SimpleDateFormat fmt= new
java.text.SimpleDateFormat("EEE, MMM d, yyyy K:mm a
fmt.format(string value fetch from dtabase field);
Plz provide me the solution asap. very urgent
request.
Regards
venki.Have a look in to the below code
import java.text.SimpleDateFormat;
import java.util.Date;
public class DateFormatTest
public static void main( String[] cmdArgs )
throws Exception
SimpleDateFormat sdfInput =
new SimpleDateFormat( "yyyy-MM-dd" );
SimpleDateFormat sdfOutput =
new SimpleDateFormat ( "EEE, d MMM yyyy hh:mm aaa" ); //Change the patterns in to what ever u need
String textDate = "2001-01-04";
Date date = sdfInput.parse( textDate );
System.out.println( sdfOutput.format( date ) );
i will suggest u to look in to the API doc you will come to know lot many things.

How to change the date/time

Now I chang the CMLocal date/time group and apply it to Device pool for phone, but I find the date/time displayed on phone is wrong ?why?

I have the same problem with CCM 4.1(3)SR3 and Cisco IP Phone 7970.
Can you help me please?

How to change the standard time in ical

Hi!
When I create a new date in iCal, which is after 4 pm, iCal alway wants to set the ending of this date automatically on the next day. ( 8 hours standard)
how can I change the preferrences for creating a new date less than 8 hours, for example 4 hours? Do I have to change it in the terminal?
Many, many Thanx in advance!!!

Hi!
When I create a new date in iCal, which is after 4 pm, iCal alway wants to set the ending of this date automatically on the next day. ( 8 hours standard)
how can I change the preferrences for creating a new date less than 8 hours, for example 4 hours? Do I have to change it in the terminal?
Many, many Thanx in advance!!!

How to change the snooze time in notifications

I like the snooze settings in my reminders in notifications. Is there any way to change the time the snooze lasts? I would like to prolong it.

Click and hold the "Snooze" button, then set the time in the dropdown menu.
Best.

I have the mobile gallery with an album of photos to be shown as a slide show. I cannot find how to Chang the viewing time. I'd like it to be 10 seconds. How do I do it. I have tried changing the general set tins in photo and pictue frame, but that doesn'

How do I set different viewing times for the mobile gallery.
I' like to change it from about 3 seconds to10 seconds.

I hope this is something that will be corrected in the next vision of either theoperrating system, or in the gallery. three seconds is way too short for showing pictures to friend while telling abut them. Even apple's screen savers ware slower between the transitions.
I'll do a search ontne store for an app. Do you think I should search for a different photo display, or for something that allows one to change settings on the current gallery app?
thanks
Phyllis

How to change the transition time for a title in the new imovie

With the new update I have lost how to do a simple task.
I have titles in the lower left hand corner ine a video (pictured below). I would like for the titles to change seamlessly, without blinking after each new title appears. Sort of like a digital clock ticking. So say there's a video clip for each day in August, I want the date to change without blinking and re-appearing each time. This was easy in the past version of imovie. But I can't seem to find it in this version.
Any help would be greatly appreciated!
The red box indicates that I have attempted to merge the title into the title that comes after to see if it blends the transition, but it still blinks before showing the new title.
Movie Version 10.0

Please take a look at the usage of the precision editor it's very powerfull as are a lot of functions in iMovie10.
http://help.apple.com/imovie/mac/10.0/#movf8b8fc9b2
(I hope it directs you to the English version). And of course I asume you have the latest version (10.0.3) which solves al ot of the earlier problems.
In case you understand some Dutch. I've produced a number of video-tutorials on the usage of iMovie10.
http://www.videoidee.nl/iMovie/imovieindex.html
Part 5 2nd half explains the usage of the precision editor in detail.
If you don't follow my Dutch, google for iMovie10 tutorials and you will find lot's of video-tutorials in English.
Have Fun
Ben

How to change the date and time during OVM installation for Fusion Apps

Hi,
The customer is using Fusion Instance which is a V1 (Build 19) OVM installation shipped by Oracle with Demo Data (including seeded user IDs and roles) in it.
Now they have issue with Date format for the application on the screens is showing MM/DD/YYYY where as it should be (Singapore) Standard is DD/MM/YYYY.
Q/A: How to change the date/time in OVM image
Refer SR : 3-5640792461
Regards
Ganesh Ananthapadmanaban

Not a problem. There are a number of other system and network setup commands that you might find useful at some time. From within the Remote Desktop Admin in the Send Unix Command window type:
networksetup -help
systemsetup -help
That will give you lists of the commands, including the one I posted above, with their basic syntax. They're handy to know.
Cheers.

DMP-4400G How can I change the local time

Hi,
Recently I installed DMS 5.0.2 and DMP-4400G for Digital Signage. Now I am running a Flash application that is embedded into a HTML page, but sometimes the DMP does not show the content of the flash, the LCD shows a temporary error; this error never occurs when I use a standard PC with any Internet browser to display the same content. The webmaster says that DMP does not have an updated time and date. Do you know how to change the local time and date of the DMP-4400G.
Thanks for your help.

Jhon,
There are couple of things...
1. The DMP 4400G has a internal clock but at this time there is no way to change the date & time on the DMP 4400G.
What does the date & time have to do with the Flash Content anyway?
2. What version & type of Flash is being used for this embedded Flash content? Is the correct version selected & configured on the DMP?
Cheers!
T.

How to change the default Real-Time Collaboration page?

Who can tell me how to change the default Real-Time Collaboration page?
If I want to add my corporation logo in the top of the default page.How to do?
Thanks!

Thanks for your help.
"Click the Sites tab to display all sites and their IDs for your system." But I clicked the sites tab ,it showed "http://hostname:7777/imtapp/app/home.uix". I could not find the siteID parameter from it. Why?
How to get it from command?

I cannot figure out how to change the photo size on my iPhone 5s. I was given the choice of small, medium or large the first time I took a picture. Now I have no idea how to change it to medium. Can anyone help?

I cannot figure out how to change the photo size on my iPhone 5s. The first time I took a pic it asked if I wanted smalll, medium or large and listed the pixels. I chose small but am now finding that is too small. Can anyone help me set it to medium now? I can't find any setting for that. I'm a newby to iPhones and have no idea what I'm doing. Thanks for any help you can offer.

By "sending" do you mean sending email?
If so, what app are you using to take the photos on your iPhone 5? Or are the photos from a different source (saved to your Camera Roll from somewhere else, like a web page or Messages)?
My guess is that Mail gives you the option to send different file sizes when it detects you are trying to Mail a really large photo file. The size of photos on the iPhone 5 is really big and some email providers may stop your mail from being delivered if attachments are too large. Thus, Mail tries to help you by offering to resize the photo.
I suspect that if you are sending smaller files, Mail does not bother giving you options to save a smaller version. In fact, I have seen this behavior. So, if the photo is already "small enough", it gets sent as-is.
To my knowledge, there is no global iOS setting for this. Some apps may have different rules, of course.

How to change the defrag times

Similar Messages

Maybe you are looking for