How to change the destination folder on my computer ?

Hi everybody,
as a standard ADE uses the "My Digital Editions" folder under Documents and Settings\User.
We are working with Win XP
Is it possible to change this path ? And if so, how
I am looking forward to your reply.
Thanks in advance
Janine

Hi Frustrated ;-) --
All I want to do is store my data files on a portable drive, like I do with my music library and my overdrive media audio books checked out from the library. I have 3 computers that I use regularly. The software (iTunes/Overdrive Media Console) is installed on all three of them, and when I connect my portable drive I simply point the software to that location to work with my own files.
I get that the software itself has to be installed on the actual computer rather than on a portable drive -- though certainly there's no reason it MUST be the C drive -- but the idea that you can't tell the software where you want it to maintain your data files is absurd.
When I got my Sony Reader I tried out their software, found it couldn't specify a library location, and decided to try ADE, figuring Adobe surely wouldn't make that mistake. Alas. After discovering that Adobe did in fact make the same mistake and apparently has no plans to fix it, I uninstalled ADE & went back to the Sony software. I figure if I'm going to have my software dictating where I can & can't keep my files, I might as well use the product that came with my device. It's no worse than ADE.
Since people have been complaining about this situation for 4 years and getting the same answer, I have to presume that Adobe is listening but doesn't care. I would like to at least hear the rationalization for their decision.

Similar Messages

How to change the destination folder when downloading Adobe Reader 9.0?

I have an old version of Adobe Acrobat Elements 6.0, and I recently installed Acrobat Reader 9.0 and uninstalled all old Acrobat Readers on my computer (6.0, 7.0 and 8.0). After that, when I open AAElements and try to convert a document to pdf file, a msg shows: Unable to find Adobe PDF resource files. Do you want to run the installer in repair mode? I tried to say yes, but it didnt work. I tried to uninstall and install them back a couple of times (Reader before Elements) (Reader after Elements) without luck. PLEASE HELP! Thanks in advance! :)

How do I stop post of
Photoshop Elements coming
to my computer after I deleted it?

How do I change the destination folder for Icloud Itunes down loads?

How do I change the destination folder when I download songs from the Icloud?...I want the songs to go to an external hard drive and not the hard drive on my pc

You might want to ask that question over in the iTunes for Windows forum. They should know if it's possible to change the location to and external drive.

How to change archive destination folder

Hi,
Im using oracle 11g,
when i run this cmnd, im seeing the following
sql> archive log list
archive log list
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /home/oracle/archivelog
Oldest online log sequence 2277
Next log sequence to archive 2279
Current log sequence 2279
the disk space is low on this destination folder
So I need to change the archive destination new folder /u03/arch
Please let me know how to change the destination
Thank you
Edited by: praveenb on Nov 3, 2011 6:22 AM
Edited by: praveenb on Nov 3, 2011 6:24 AM

Hi TYL,
I run the command
SQL> show parameter log_archive_dest
NAME TYPE VALUE
log_archive_dest string
log_archive_dest_1 string location=/home/oracle/archivel
og
log_archive_dest_10 string
log_archive_dest_2 string
log_archive_dest_3 string
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
NAME TYPE VALUE
log_archive_dest_9 string
log_archive_dest_state_1 string enable
log_archive_dest_state_10 string enable
log_archive_dest_state_2 string enable
log_archive_dest_state_3 string enable
log_archive_dest_state_4 string enable
log_archive_dest_state_5 string enable
log_archive_dest_state_6 string enable
log_archive_dest_state_7 string enable
log_archive_dest_state_8 string enable
log_archive_dest_state_9 string enable
SQL>
Im seeing ORA-00257: archiver error. Connect internal only, until freed. (DBD ERROR: OCISessionBegin)
Please let me know how to solve this issue
Thanks
Edited by: praveenb on Nov 3, 2011 7:31 PM

How to change the Destination URI value of a item table at run time

I'd like to change the Destination URI of item of a table region when a column X of my view is not NULL. Where should I set the new Destination URI value for the item table region for specific row? Is in the RowImpl for the view object or in the Controler of the page?
I'd really appreciate any suggestion.
Thanks in advance.

Hi,
Thanks for the help, but I still dont know where I should to use setAttributeValue(DESTINATION_ATTR,OADataBoundValueViewObject());
All examples that I saw till now here, suggestes to change something in the page in Controller but based on something entered in the page. In my case is IN to OUT, I will render some item table with a specific value parameter based what is in the database. Being more specific, I have a html table and one column Col1 has a value and it will have a DESTINATION URL if another column Col2 is Null. I believe I would have to check somewhere if the Col2 is null or not and change the DESTINATION URL property.
Thanks again..

How to change archive destination folder on oralce 11g

Hi
Im using oralce 11g, linux, 64 bit.
I created new database and imported data.
Im getting this error
ORA-00257: archiver error. Connect internal only, until freed.
I've to change the archive destination to a folder having relatively morespace .
Please let me know how to do.
Thanks
Edited by: praveenb on Oct 17, 2011 9:56 AM

ORA-10997: another startup/shutdown operation of this instance inprogress
ORA-09968: unable to lock file Linux-x86_64 Error: 11: Resource temporarily unavailableIt looks like you have trying to start instance when it is already running. check for running instances on server.
$ps -ef|grep pmonIf any prorcess related to your instance running, kill or clean them and then start again.
ORA-09817: Write to audit file failed.
Linux-x86_64 Error: 28: No space left on device
ORA-09945: Unable to initialize the audit trail file
Linux-x86_64 Error: 28: No space left on deviceCheck the audit file destination and cleanup all audit files from
SQL> show parameter audit_file_destand use similar commands to change archive destination, to change archive destination no need to bounce .
SQL> show parameter log_archive_dest_1
NAME                                 TYPE        VALUE
log_archive_dest_1                   string      Location=/u01/archvie VALID_FO
                                                 R=(ALL_LOGFILES,ALL_ROLES) DB_
                                                 UNIQUE_NAME=adg
SQL> alter system set log_archive_dest_1='location=/u01' scope=both;
System altered.
SQL> show parameter log_archive_dest_1
NAME                                 TYPE        VALUE
log_archive_dest_1                   string      location=/u01

How to change the destination number of my online ...

I want to change the number that my online number forwards to. How do I do that? I see instructions for those who are using Skype for Business, but I just have a single account with a single line. How do I change the number that rings when someone dials my skype-to-go number?

Hi,
A user is not have the No. of processor but a work process can handle N No. of users. If a user hit any transaction v acn say from a list of N worl proceesor which has been taken the work.
Correct if I am wrong.
Regards
Syed.

Included in the fla. File, change the destination folder.

Hello.
I have my Flash file (myFichier) and I have included a .swf (theSon.swf).
During installation (on Android), "myFichier" to intall in applicationDirectory and "theSon.swf" too. I would like the "theSon.swf" file is installed in applicationStorageDirectory.
How?
Thank you.

Can you manually select it for inclusion by modifying Packaging Settings - Package Contents in "Export Release Build" settings?

BI 7.0 infospoke - how to change standard destination path on appl. server

Hello,
I have the following problem:
I need to extract large amounts of data from infocubes to flatfiles. I have created an infospoke to do this. However, in this infospoke, the destination path, when I choose application server, is fixed.
In BW 3.x, there is a document "BW 3.1 Open Hub Extraction Enhancement Using Literal Filename and Path.pdf" that describes how to change the destination path for the application server.
This solution does not work for BI 7.0, I get short dumps, probably due to ABAP OO.
I need to extract the data to flat files on the application server, not on my local machine, nor into a table in SAP itself, so I need to change the destination path, because the amount of free storage is limited in the standard destination path.
Has anyone encountered this problem in BI 7.0 and solved it?
best regards
Ting
Edited by: Ting Kung on Jun 30, 2008 9:19 AM
Edited by: Ting Kung on Jun 30, 2008 9:19 AM
Sorry, wrong subforum, will close this

Hi Ting.
I never had a simmilar problem but, if you go to your InfoSpoke, right click --> "Change" you can see (and change... ) the following values:
Destination Type: FILE (the one you have choosen)
Application Server: Check Box (I think this is your setting)
Server name: (BW server)
Type of File Name: (Here you can choose Between "File Name" or "Logical File Name")
Appl.Server File N: "MY_FILE.CSV" (for example)
Directory: (The directory you want - take a look at the end of this post )
Separator: (The field separator)
Note : If you are working with Linux or Unix you have to look if the BW system user has the corresponding rigths to write in the FileSystem.
. In the beginning I advice you to use something like this /usr/sap/<SID>/DVEBMGS<XX>/work
Hope it helps.
Regards.

How to get crawler destination folder path through api

with following code i am getting crawler folder source path
com.plumtree.openfoundation.util.IXPPropertyBag propertyBag = oPTCrawler.GetStartLocation();
String oldFolder = propertyBag.ReadAsString("PTC_UNIQUE");
how to get the destination folder path ?
any help appreciated

i would like to get the values from PT_TAX_DESTFOLDERS
<A N="PT_TAX_DESTFOLDERS">101324</A>
1324 being the folder id
when trying
com.plumtree.openfoundation.util.IXPPropertyBag propertyBag = oPTCrawler.GetStartLocation();
Object[][] propertyBags = (Object[][])propertyBag.ReadAsObject1DArray("PT_TAX_DESTFOLDERS");
i am getting null

Can I change the Home Folder of users with Group Policy (or in another centralized way)?

I know how to change the Home folder of users from AD Users & Computers -> their Properties -> Profile tab. But this is not very practical when one has users spread across many OUs, and with users being added and removed often.
So I am wondering whether there is a way to do the same with a GPO. The closest thing I found was Folder Redirection, with which I can change the location of particular profile folders for each user, but not the location of the whole profile.
Is there a way to redirect the entire location of users in a centralized way, using a GPO or some other mean?

I would recommend reading that about the management of roaming profiles: http://technet.microsoft.com/en-us/library/cc784961(v=ws.10).aspx
You can involve the use of Powershell scripts for the management of roaming profiles:
http://social.technet.microsoft.com/wiki/contents/articles/12460.powershell-automate-roaming-profile-folder-permissions.aspx
http://gallery.technet.microsoft.com/scriptcenter/Check-if-an-AD-user-has-a-45ed5d1c
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

How to change the "Current Destination Folder" to install iTunes

How can I change the Destination Drive during the installation of iTunes? The default is "C:" and it cannot be changed

Hi,
Check in OMSY Transaction that, Which current month and year is having your comapny code.
and go to T.Code MMPV
enter Next Month of that cureent period and Year
and Execute. You find the message that your current period has changed.
Do the same process month by month till reaches to current period and year.
Let me know if you have further queries.
Padma.

How do I change the destination of a the submit button on a form in Form Central?

How do I change the destination of a the submit button on a form in Form Central?

Sure. Because it is a scheduling form and I want the filled out form to be forwarded to our scheduling department email.
Sincerely,
John Biester
Operations Manager

How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)

How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)
For example...
I am on a webiste and wish to upload a photo.
I click on select file on the website
Finder opens and defaults to 'Downloads' folder (it happens with all wesbites)
How do I change this?

I am on a webiste and wish to upload a photo.
I click on select file on the website
You are attempting to download the picture to your computer not uploading photo to the website if I am understanding you correctly.
To change the download direction, you must do so through your browser's Preferences. If you are using Safari, hopefully, someone who uses Safari will help you and/or post over in their forums. I do not use Safari.
If using Firefox>Preferences>General>Save Files to:

How to change the folder name in the web report.

hi experts,
can anybody give me the solution, how to change the folder name in the web report. any help is appreciated.
waiting for ur favourable response.
thanks
suri

Hi Tony,
Yes, the business requires, only to change in the webreport only not in bex and roles. any suggestions will be helpful to me.
thanks
surendra

How to change the destination folder on my computer ?

Similar Messages

Maybe you are looking for