How to change the document page size in a PDF?
OK can't figure a way to do this and hoping it's still possible. On mac snow leopard, adobe X pro. Use to be able to resize the pages in a pdf by printing to the pdf distiller. As this is no longer possible how do I accomplish this? I often have document set pdf's that are 30" x 42" that I want to create a pdf on letter or tabloid size. I can print - so i'm not talking about that. I mean creating a new pdf where the new document size is letter or tabloid. There must be a way to have Adobe save out a new pdf with the pages scaled? HELP it's driving me crazy
Oops, I misread your question, so I edited my response.
Similar Messages
-
Changing the document page size after the fact.
Does anyone know of a way to change the page size globally after the fact?
I have sent a 200 page book created with Pages '08 to my printer. The work has a full bleed watermark in the background on a custom 7" X 11" document. I've just been informed that he needs to increase the paper size to 7.25 X 11.25 and have me increase the watermark so it can be trimmed down.
Is there a way to change all 200 pages or do I need to set-up a new document and do a whole lot of cut and paste?
Thanks in advance everyone.Your problem is that the change is not proportional.
However it is not a great change, 6.66% at most. If you don't mind a subtle change in height vs width, just create a pdf of the entire document and tell the printer to change the size on going to plate.
Alternatively you can simply scale it up the 6.66% which will make the height about 0.5" too high and trim away the excess.
The other way is only scale it up 2.27% which gives you the right height but leaves you with 0.1" less width.
Or you can go in between and have a compromise for both directions by scaling up 4.4%.
It depends if you have white margins in either direction that can take up the slack and also how much bleed you have on the watermark. You only need 1/8" to cover any trimming errors.
As this appears to be quite a long book and would need to be imposed up in signatures, I would imagine the printer must have the necessary imposition software to allow for creep etc, which should also allow for non-symmetrical scaling.
Don't you Americans ever feel at moments like these that you wish you weren't the last people in the world to not use metrics and rational paper sizes? -
Hi, I'm working on a document in PAges 09. Any idea on how to change the document color? I want it black instead of white.
Nichelle,
You must add your own background object, and then make it Black.
Insert > Shape > Rectangle
In the Wrap Inspector, set to Floating.
In the Graphic Inspector, set Stroke to None and set Fill to Black.
Grab the corners of the document and stretch the document to cover the entire page.
Back in the Wrap Inspector select "In Background".
Format > Advanced > Move Object to Section Master.
Regards,
Jerry -
Change the Default Page Size for WebI
Hello Experts,
We have requriement where we need to change the default page size and margins for WebI, I have change the page size in defaultconfig.xml but don't see any options for Margins, How do I change the default margins?
Any help or suggestion would be highlt appereciated.
Thanks,
NishithFrom what I am finding it doesn't seem to be possible in 3.x, I could be wrong and someone might chime in with a workaround but at least it was added in 4.0
-Dave -
How to change the picture frame size in Lightroom 5 Book
I would like to control the actual picture frame size when making a Book in Lightroom 5. Or else know the sizes of the different picture frames provided by choosing the different page layouts. That way I can either change the picture frame dimensions to accomodate each photo or change the image size to fit in the offered picture frame. I find that using the software as is winds up cropping the images in unwanted ways. Modifying the picture frame would be my preferred alternative. Appreciate any ideas
Hi again Tony,
I have been using Adobe Photoshop 7, Photoshop Elements, Perfect Photo Suite, Photo Studio, etc., changing Image size, placing a picture on a page and then, do a simple last minute size adjustment by using the arrows to stretch or shrink it in place. Things would be a lot simpler if I could do the same thing with the cells in Lightroom 5. Cell pad adjustments do not fill the bill.
I think we’ve pretty much concluded this exchange. Thanks again for your effort.
david
ay [email protected]
Sent: Wednesday, March 12, 2014 11:27 PM
To: dgbrow
Subject: How to change the picture frame size in Lightroom 5 Book
Re: How to change the picture frame size in Lightroom 5 Book
created by Tony Jay <http://forums.adobe.com/people/Tony+Jay> in Photoshop Lightroom - View the full discussion <http://forums.adobe.com/message/6205206#6205206 -
How to change the default window size display font size on Lync 2013 main window?
Hi champs,
Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
Thanks,Hi,
Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
If not, as I know, there is no natural way to change it.
If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
How to change the initial page without open safari
Hi everybody,
I have problems opening my safari because of the plugin silverlight. I defined a tvair.swisscom.ch page as initial and it makes an error open it. it means that my safari doesn't work at all.
i want to know if somebody knows how to change the initial page from safari without open safari and solve this problem.
thx
cheers
nunBack up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.Safari.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test. Optionally, restore the file from a backup that predates the problem.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
How to change the document type while creating a PO by ME59N
Hi,
I have 2 groups of PR's, for group one the document type is picked as NB and PO is created and for the group 2 it should pick as XYZ and PO should be created using ME59N tcode.
How to change the document type for group 2 in ME59N? Which user exists to use to change the document type while creating PO in ME59N?
Can any one suggest me.Hi,
There a config area, where you can define default PO doc types for a particular Pr doc type. If you maintain the settings properly there, then your requirement can be fulfilled.
SPRO->IMG->MM->Purchasing->Purchase requisation->Define doc types.
This will serve your purpose.
Thanks,
Srinu -
How to change the document color mode(RGB to CMYK)?
Kindly advice me how to change the document color mode(RGB to CMYK) via scripting in "illustrator cs3".
Thanks.Somebody wrote and posted this a couple of years ago.
// Duplicate the selection from the active document into a new document.
// To invoke the JavaScript debugger, remove comment delimiters
//$.level = 1; debugger;
var newItem;
var docSelected = app.activeDocument.selection;
if ( docSelected.length > 0 ) {
// Create a new document and move the selected items to it.
var newDoc = app.documents.add();
if ( docSelected.length > 0 ) {
for ( i = 0; i < docSelected.length; i++ ) {
docSelected[i].selected = false;
newItem = docSelected[i].duplicate( newDoc,
ElementPlacement.PLACEATEND );
else {
docSelected.selected = false;
newItem = docSelected.parent.duplicate( newDoc,
ElementPlacement.PLACEATEND );
else {
alert( "Please select one or more art objects" );
It should give some ideas about how to proceed. -
How to Change the Document Condition Values in PO print
HI,
I have a requirement to change the document condition values in PO printout. We are using the copied form of MEDRUCK.
Please tell me how can i change the Document Condition Values at run time.
Thanks....hi
hence you have copied standard script you cant able to change the driver program for this you have to use itcsy structure.
go to the page window and select the window which you have the amount field. open the text editor of the windoiw here write
/: PERFORM CONTACT IN PROGRAM ZAMOUNT_ZF110_IN_AVIS1_C
/: USING ®UH-ZALDT&
/: CHANGING &DT&
/: ENDPERFORM
now create a report program with name ZAMOUNT_ZF110_IN_AVIS1_C.
and follow as the example program is .
*& Form CONTACT
text
-->IN_TAB text
-->OUT_TAB text
FORM contact TABLES in_tab STRUCTURE itcsy
out_tab STRUCTURE itcsy.
DATA : v_telf1 TYPE telf1.
DATA : v_telfx TYPE telfx.
DATA : v_adrnr TYPE ad_addrnum.
DATA : v_flagcomm6 TYPE ad_flgcm06.
DATA : v_datum(10) TYPE c.
DATA : v_sydatum TYPE sy-datum.
DATA : v_lifnr TYPE lifnr . " Santosh Rawat , 19th Feb
DATA : v_email TYPE ad_smtpadr . " Santosh Rawat , 19th Feb
LOOP AT in_tab.
IF in_tab-name = 'REGUH-LIFNR'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' " Santosh Rawat , 19th Feb
EXPORTING
input = in_tab-value
IMPORTING
output = v_lifnr.
SELECT SINGLE telf1 telfx adrnr FROM lfa1
INTO (v_telf1, v_telfx, v_adrnr)
WHERE lifnr = v_lifnr.
SELECT SINGLE smtp_addr FROM adr6 " Santosh Rawat ,19th Feb
INTO v_email WHERE ADDRNUMBER = v_adrnr. " Santosh Rawat ,19th Feb
SELECT SINGLE flagcomm6 FROM adrc INTO v_flagcomm6
WHERE addrnumber = v_adrnr.
ELSEIF
in_tab-name = 'REGUH-ZALDT' OR in_tab-name = 'REGUP-BLDAT' .
MOVE in_tab-value TO v_datum.
REPLACE ALL OCCURRENCES OF '.' IN v_datum WITH ' '.
CONDENSE v_datum.
MOVE v_datum TO v_sydatum.
*CALL FUNCTION 'CONVERSION_EXIT_INVDT_INPUT'
EXPORTING
input = V_DATUM
IMPORTING
OUTPUT = V_DATUM
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
EXPORTING
date_internal = v_sydatum
IMPORTING
date_external = v_datum
EXCEPTIONS
date_internal_is_invalid = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDLOOP.
LOOP AT out_tab.
IF out_tab-name = 'TEL'.
MOVE v_telf1 TO out_tab-value.
ELSEIF out_tab-name = 'FAX'.
MOVE v_telfx TO out_tab-value.
ELSEIF out_tab-name = 'EMAIL'.
MOVE v_email TO out_tab-value. " Santosh Rawat , 19th Feb
ELSEIF out_tab-name = 'DT'.
MOVE v_datum TO out_tab-value.
ENDIF.
MODIFY out_tab FROM out_tab.
*MODIFY TABLE OUT_TAB .
ENDLOOP.
ENDFORM. }
reply for any query.
regards,
venkat. -
How to change the master page and theme dynamically in sharepoint2013 anonymous site
hi
I have to change the master page and theme dynamically in sharepoint2013 anonymous site. i have to show one master page to authenticated user another master page to anonymous user through code
SrinivasHi Srinivas,
According to your description, my understanding is that you want to change the master page and theme dynamically based on the anonymous users or authenticated users.
Per my knowledge, there is not an OOB way to change the master page and theme dynamically.
SharePoint is based on Asp.net, as we know Asp.Net request processing is based on pipeline model, so we can delevlop a custom HttpModule to dynamic change the master page based on current logon user profile(using SP Object Model to get).
Another solution could be to use the SecurityTrimmed control that injects the CSS depending on global user permissions, more information, please refer to
it.
Some similar posts for your reference:
http://social.msdn.microsoft.com/Forums/office/en-US/c2b2d0da-c752-4aea-9c2d-e31a5b1a2988/sharepoint-2010-dynamic-masterpage-based-on-userprofile-property
http://johanleino.wordpress.com/2011/10/20/using-a-different-master-page-for-authenticated-users-in-sharepoint/
http://sharepoint.stackexchange.com/questions/21679/how-can-we-use-a-different-masterpage-for-annoymous-and-authenticated-users
http://sivarajan.me/post/How-to-customize-the-SharePoint-2013-Master-Page-for-Anonymous-Users
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
How to change the web page title of a web dynpro app?
Hello,
I would like to change the HTML page title of a web dynpro application without renaming the application component itself - but how?
Thanks for your comments!Hi M Walter,
Assuming you are using Web Dynpro Java, you can change the title of the Web Page for Web Dynpro App by adding the title to the main window of your app.
Go to Windows and open the properties. There will be a field called 'title'. Give the title you want, save, build, DC->Build and deploy.
The title you gave to this Window will be displayed as the title of your Web page.
Regards,
Ajay -
How to change the print page setup in IE using javascript
dear all,
I want to take print out envelope paper size, so i want to chnage the page setup in IE
i want to change the print page setup in IE using javascriptI think, you can do this using CSS.
http://support.sas.com/rnd/base/ods/templateFAQ/Template_csstyle.html -
How to change the code page on windows 2008 r2 ?
How do I configure a specific code page on windows 2008 r2 ?
I understand that I can go into control panel and change regional settings but if want to change the code page from one codege to say CP850 how do i do that ?.
There is no option in the control panel to select code page ?
ThanksHi,
I have followed the below steps which did not cause any issue to my server. Have a full latest backup and then follow the below steps.
Create a start up batch file that includes all the commands you want.
Then edit the registry to point to your start up file.
http://technet.microsoft.com/en-us/library/cc779439%28WS.10%29.aspx
c:\startup.cmd
@echo off
chcp 437
HKLM\SOFTWARE\Microsoft\Command Processor
AUTORUN="C:\startup.cmd"
Thanks,
Umesh.S.K -
How to change the default font size in X11?
I was a PC/linux user and have switched to use Mac lately (MBP Snow leopard 10.6.8).
Everything's been running perfectly on Mac so far and I really like it, until I have to run some programs on XQuartz/X11 (XQuart 2.7.0).
The default font size in the Xterm is too small. And I hate it that I have to change it everytime i open a new terminal (via vt fonts menu, ctrl+right-mouse click).
Is there a way to change the default font size "permanently" in XQuartz/X11 ??
This may be a stupid question to ask in the developer forum but i cant really solve it.
There's only config. file ~/.Xdefaults they have mentioned so far on Google but i really cant find it regarding to the directorty.
Thank you very much in advance.You would be surprised to find out that is not like this, to get your account blocked you really need to do a lot of damage and posts are not removed unless they are illegal, and *always* it needs more than a person to delete something. That's a site managed by the community, not by some people put in place by a company.
It is always acceptable to link to external resources as long these resources do provide additional usefull information. Clearly the thread on that side contained much more information than the one here. I observed people linking from there to this forum, but it's not so common, and that's not due to the policy, just because here is more chat and less usefull information.... you will not see endless threads of replies on with "yes, I have the same problem" there.
Shortly, this is "discussions" and is quite different in approach than the SE model, where everythign is aimed towards getting the be answers UP and removing all the nonsense.
I wish that Apple would invest more in discussion, and going towards making this more practical.
Maybe you are looking for
-
Error coming while modifying data in infotype through HR_INFOTYPE_OPERATION
I have created a report which reads a excel file fom the system and then upload data in infotype 0077 through HR_INFOTYPE_OPERATION. In this report first I check if the record exists in IT0077 for a particular employee , if not then creates a new rec
-
I deleted the "new" library and repopulated the lists when re-installing. Even though I connect and the store comes up, and my login is correct, I get an error message every time. How do I reset it so it forgets all the errors and goes to the store t
-
Adding JS/CSS clock to website
I want to add this clock to my website, made in Muse. Is this possible to do? Would anyone be up for helping me, please? http://www.paulrhayes.com/2009-03/an-analogue-clock-using-only-css/ If not possible, is there a close alternative? Thanks
-
I just got a ne i pod touch .. i installed the latest version of I tunes.. Well now when everi try to sync my i pod syncs only some stuff and then shows "the disk cannot be read from or written to" . i updated my i pod but it did not help.. please te
-
I have a problem I will be moving from internet cable Mediacom to DSL service . I have many e-mails about a thousand I need to save so once I move I can view them when I have the DSL . I would like to put them on a thumb drive say a 32 gig and view t