How to change the element of container in the task

Hello,all.
I am new for workflow,today i find a new problem:when i finish a activity in the template,the element of container in the task can not be changed. Why? And how to change?
Thanx,

Hi Nemo,
What I understood from your query is as follows -
You have worked with Task activity in a workflow template. Now you want to change the element in Task Container, which you are not allowed to do so.
If above is your query, kindly find following solution -
1. You must have used some BOR object in your task activity.
1. If you have used automatic binding between the method of BOR and workflow task then automatically the container elements are created. Now if you want to change these container elements then recommended is to change them first in method of BOR and again link the method. Let these elements generate automatically as part of binding.
2. If you don't have any binding between your BOR method and Task container then, you don't have any elements created automatically. So you can directly create new elements inside task.
Hope this helps you.
PS If the answer solved your query, plz close the thread by marking it solved and rewarding each reply.
Regards

Similar Messages

How to change data element of IDOC segment

HI Experts,
I have copied a segment E1ISU_MEASUREMENT_MEA to ZE1ISU_MEASUREMENT_MEA.
Now i want to change data element of one of the field of the segment.
Please guide me how i can do it?
is there any disadvantages of doing this?
can we do it easily?
please give me step by step instructions if possible .
thanks in advance
Anit

Hi,
When you want to modify the segment details of a particular IDoc, you could do the same by editing the segment details via t-code, WE19. Once you edit, click on, Outbound or Standard Inbound if your IDoc is Outbound or Inbound respectively. A new IDoc will get generated. The generated IDoc will be in "yellow" status, ready to be picked up by a batch job if there exists one. Else you need to manually process the IDoc via the respective program.
~ Bineah

How to change keyword in many pictures at the same time?

I gave a big series of pictures the wrong keywords. Now, I can't figure out how to change them (besides one by one...).
If I select e.g. 10 pictures in Library-mode, how to change keywords on them all at the same time?

Make sure you are in Grid View, primary monitor (if you have two), select 10 pictures and type (or delete) the keywords in the Keywording panel in the left upper corner.
Make sure the Metadata->Show Metadata for Target Photo Only is unchecked in the menus. Otherwise your edits will only apply to the primary selected (most selected) image.

How to change async to sync after deploying the process.? Thanks

How to change async to sync after deploying the process.? Thanks

you'd need to change the base wsdl, the generated one (_Name.wsdl) and the bpel.file .. and remove the generated classes .. (all in domains/you_domain/tmp/your_process dir)
the wsdl needs to get the output msg to the input msg instead of a callback porttype, the same needs to be in the generated wsdl (don't forget to remove the callback role in plnk session).. and the bpel process needs to have a reply instead of the invoke ..
this is what you would need to do .. BUT, maybe we can find a better solution for you, if you elaborate on the usecase..
during design time this is easier :-)
regards clemens

How to remove photoshop elements 3 from being the default program to open photos

how to remove photoshop elements 3 from being the default program to open photos in iMac 10.6.8; want to use Preview 5.0.3 as before. Somehow I clicked an "ok" to a question asking if I wanted photoshop e 3 to be the default program (NOOOO - too slow, too cumbersome just for viewing pix) What was I thinking????

This might help just found googling http://www.bittbox.com/os-x/how-to-set-the-default-program-to-open-a-certain-type-of-file- in-mac-os-x
Try once please.
Thanks,
Garry

When I use Photoshop CS 6 to edit video, I don't know how to change video speed after I converted the clip to smart object?

When I use Photoshop CS 6 to edit video, I don't know how to change video speed after I converted the clip to smart object? The clip color turns purple and it only allows me to add motion but not change the clip duration and speed anymore.

Thanks for the reply and as a work around method I used the Photoshop to do all the adjustments then export the video to iMovie to finish the final cut. I also have a problem to paint or clone on a blank video layer created in Photoshop. It tells me the time is beyond the target frame time, I don't understand the message. Can you explain to me what did I do wrong? Thanks a lot!
John Wang
801-3618742
[email protected]
http://johnwanggallery.shutterfly.com

How to change Topic's Icon and show the Print Button

Hi, currently i'm using robohelp html version 8. I have spent quite some time to figure out how to change topic's Icon and show the Print Button in my project. Anyone can help me on this? Btw, i using MX(template) to generate the output with FlashHelp Pro.
Below is the screenshot for clearer clarification:
Thanks.

We would have told you if there was.
Sorry but a downside of FlashHelp is that your customising options are limited.
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

I accidently deleated file from the Elements organizor and from the hard drive. Can I get it back?

I accidently deleated a file from the Elements organizor and from the hard drive. Can I get it back? How to do it?

There's a good chance that you can if you haven't done too much work after deleting it. Typically files are not actually wiped from the hard drive, rather the space they take is marked as free to use by another file if needed. So if it hasn't been used by another file it can be recovered.
Try this program... it will help if you know where the images were stored.
http://www.piriform.com/recuva
Colin

Can't I use my Scanner with the Elements 10 editor without the organizer??

I have been using Photoshop Elements for a looong time to help me create the product images I need for my online business. It's been a love-love relationship... until I took advantage of a special offer and bought Elements 10. Now it seems the only way I can scan images is thru the Organizer.... and the organizer is something I don't need.
Is there a way to scan my images thru the Editor only... and completely bypass the organizer (as I'm able to do with my older version of Elements)? Like a twain plugin I can install or something?
I may scan 10 images and decide to use only 3 of them... and those are the only ones I save.
With the way PSE10 is set up using the Organizer to scan, it's saving all 10 of them. Not to mention the extra steps of scanning thru the Organizer... (which means that pop-up window for my scanner every time), back over to the editor to pull the images in for editing, back to my files to delete the ones the organizer saved that I don't want... etc etc etc.
It's like 5-6 extra steps altogether and a huge time-sink for me (you know the old saying... time is money).
If there's no way to bypass the Organizer for scanning.... can I get a refund on my purchase? My older version of Elements works beautifully for me... I was just hoping for more sophisticated image editing capabilities.
VERY frustrated right now.

Thank you very much for your explanation which I fully understand. Since a "fix", as you say, is not a solution might it not be a good idea to alert purchasers of the latest editions of Elements that they have an option to try this alteration to the installation in order to be able to import images from a scanner? (My own experience with versions prior to 9 always worked perfectly!) I do not know but does Photoshop CS5 allow the user to import images from a scanner or does the user have to use a similar solution to what applies to Photoshop Elements? I find Elements to be a very good app and am sure it is a good selling product for Adobe for amateur/semi-pro users that the alternative that I suggest may be a useful tool for existing or new users who want or need the capability to import from a scanner rather than having to go through other more difficulty and time consuming ways of doing the same task. Kindest regards and with my best intentions.
Fergus Cooper
Date: Tue, 20 Dec 2011 12:50:51 -0700
From: [email protected]
To: [email protected]
Subject: Can't I use my Scanner with the Elements 10 editor without the organizer??
    Re: Can't I use my Scanner with the Elements 10 editor without the organizer??
    created by Barbara B. in Photoshop Elements - View the full discussion
It's not a "fix", exactly. The TWAIN plug-in causes a lot of crashing in PSE so in the past couple of versions adobe makes you install it if you want it.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4096095#4096095
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4096095#4096095. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to change a TAB dynamically to be the active tab?

Hi,
I have a portlet written in Java and registered using a web provider. This portlet exposes a link which drives the content of another portlet through parameters&events.
This other portlet is placed on the same page but on a different TAB (!).
What I want is, when clicked on the link in Portlet1, this changes the content of the Portlet2 (via an event and parameter - that works) AND should change the TAB, so that the TAB which contains the Portlet2 is active and shown.
I couldn't figure out, how to change the TAB with an event or any other way. I can easily change the page through an event, but not to a tab on the same page. Do I overlook something or can I just don't use events for this?
Is there any API function which does changing tabs or getting the tab id or is there any other programmatic workaround to do dynamic tab changing?
If so, can someone point me to a code fragment?
Any help would be much appreciated.
Cheers,
Erik

A work around may be to change the location.href to the url of the tab you want to switch to.
Have you tried that already?

How to change colour of mailbox containing new mail

I have Thunderbird sort my incoming mail into various mailboxes based on various criteria.
Until recently, when new mail arrived in any box, the title of that box (in the list, left hand pane) turned red - thus making it easy for me to identify which boxes needed my attention. For some reason this has stopped. The incremental number showing the number of unread messages still changes, but the title colour remains black.
Anyone know how to change the behaviour to highlight mailboxes containing new mail please?
Thanks..

My point is that until recently the behaviour was automatic - it changed the colour of box names as amatter of course. This has now changed, wth all box names being in black whether or not there is new mail in the box.
I receive a lot of mail and being able to quickly distinguish which box had received new mail would make life easier..
I suspect there is a setting within Thunderbird to enable this but I'm damned if I can find it..

How to change Windows 7 file associations in the registry

Hi,
I have a group of computers that have Office 2010 installed and then PowerPoint Viewer 2007 was installed after that to temporarily resolve an SCCM 2007 patching issue. Needless to say, PowerPoint Viewer 2007 changed some of the PowerPoint 2010 file associations
to itself instead. I am scripting a clean-up operation to remove PowerPoint Viewer 2007 and set the file associations back to PowerPoint 2010. After doing some research, the few registry paths commonly called out do not contain the information that I am looking
to change.
HKEY_CLASSES_ROOT
HKEY_CLASSES_ROOT\Applications
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts
The file associations that I need to set back to PowerPoint 2010 are as follows:
.potm, .potx, .ppsm, .ppsx, .pptm, .pptx
Does anybody know where to look for where these file associations are set in the registry?
Thanks,
Rob

This is how it is done in vbscript as well:
http://www.visualbasicscript.com/tm.aspx?high=&m=97211&mpage=1#97217
Set objShell = Wscript.CreateObject("WScript.Shell")
objShell.RegWrite "HKCR\.potm\", "PowerPoint.TemplateMacroEnabled.12", "REG_SZ"
objShell.RegWrite "HKCR\.potx\", "PowerPoint.Template.12", "REG_SZ"
objShell.RegWrite "HKCR\.ppsm\", "PowerPoint.SlideShowMacroEnabled.12", "REG_SZ"
objShell.RegWrite "HKCR\.ppsx\", "PowerPoint.SlideShow.12", "REG_SZ"
objShell.RegWrite "HKCR\.pptm\", "PowerPoint.ShowMacroEnabled.12", "REG_SZ"
objShell.RegWrite "HKCR\.pptx\", "PowerPoint.Show.12", "REG_SZ"
One thing to note is that the user will need to log out and log in again to reload the changes to the registry which also updates the change to the file extensions.

How to change annotation's appearance when printing the annotation under Adobe Reader?

I'm developping a plugin under SDK 7.0 for Adobe Reader . I have two problems.
1)I will change annotation's appearance when printing the annotation. How to do under Adobe Reader?
Uunder Adobe Arobat,I use PDRegisterAnnotHandler to register GetPrintAppearance,but PDRegisterAnnotHandler does not work under Adobe Reader.
2)Under Adobe Reader ,app.execMenuItem doesnt work.How to execute menuItem using JavaScript under Adobe Reader?
Please Help,had better give me sample,thank.

app.execMenuItem most certainly does work with Reader - what problems are you running into trying to use it?
As for developing Reader plug-ins - yes, some of the SDK methods aren't available to Reader. If you want to change the appearance of an annotation in Reader, you would need to acquire the Cos object of that annotation and modify its appearance dictionary manually.

How to change ui element from input field to TextArea?

Dear colleagues,
When I try to add an attribute of type string in Ui configuration, I found it's by default INPUT_FIELD and can not change to text_area, does any one know how to do this?
It will be better if you can tell me how to set text and get text from the text edit.
Thanks and best regards,
Adners

Hi,
     It's simple. After you use the config tool to align your fields, generate the p_getter for your attribute and put in the following code.
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>FIELD_TYPE_TEXTAREA.
ENDCASE.
Setting or getting values are not a problem. You can do it the usual way by accessing the model/value bo's attribute values.
Regards,
Arun Prakash

How to change data element in table?

Hello all:
I just need to change data element for a field in some Z table. I know I can do it through SE11 but I just want to make sure if there is anything I should be aware of? Are there any other steps I should perform apart from making changes through SE11? Any information you could provide would be great.
Thanks.
Mithun

Hi Mithun,
Yes, you can change the table using SE11. After saving, check for errors and activate. Using Menu, Utilities
-> click on Database Utility and then click on 'activate and adjust database'.
Hope this helps.
Thanks,
Srinivasa
Message was edited by:
Srinivasa Bhanuprasad Moningi

How to change the element of container in the task

Similar Messages

Maybe you are looking for