How to change the Ethernet Interface name in Solaris 10

I have to install Oracle 10G RAC on three nodes with different ethernet cards, but the ethernet interface name must be the same which is the precondition for Oracle RAC installation.
So I want to know how can I change the ethernet name in Solaris.
For example, the ethernet name in the OS is "ce0", how can i change the interface name "ce0" to "e1000g0".
bash-3.00# dladm show-dev
ce0 link: unknown speed: 1000 Mbps duplex: full
ce1 link: unknown speed: 100 Mbps duplex: half
ce2 link: unknown speed: 100 Mbps duplex: half
ce3 link: unknown speed: 100 Mbps duplex: half
ce4 link: unknown speed: 100 Mbps duplex: half
ce5 link: unknown speed: 0 Mbps duplex: unknown
Thanks in advance.

s-wilson wrote:
You can't. The ce or e1000g refers to the driver as well as the adapter itself. The only exception I am aware of is: the ipge and e1000g which both refer to the Intel Pro 1000.I'm pretty sure I've renamed a driver in the past (and all references to it in name_to_major, path_to_inst, driver_aliases, and minor_perm) and had it function just fine after 'plumb'ing it up. However I just tested this by trying to turn a 'pcn' driver into a 'foobar' driver on a vmware box. It looks like everything works except some internal bits of the driver continue to create one file with 'pcn' in the name instead of 'foobar'. And since this is Solaris 10, the /devices filesystem is dynamic and read-only. I can't seem to force the change.
So while this may be possible with some drivers (and maybe only on older versions of the OS), it doesn't seem to be generally possible for all drivers on Solaris 10.
Darren

Similar Messages

How to change the Dashboard's name?

hi all,
Any one can tell me how to change the Dashboard's name? Seems can only change the page name of Dashboard.
thanks.
Thanks all, i have finished the rename operaiton. but i don't know whether it will have any affects on the existing dashboard pages ?
帖子经 854623编辑过

Go to settings --> Administration --> Manage Presentation Catalog --> Go to your dashboard folder --> _portal --> Edit Name and Description

How to change the public display name?

How to change the public display name since the last person left the job and I am not new person take it.

Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
As it's off-topic here, I am moving the question to the
MSDN and TechNet Profile and Recognition System forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to change the RPD file name without deploying on EM

Is there a way to change the RPD file name so it doesn't have BI0002 or BI0003 on the end of it? I can delete my BI0002 file and point the NQSConfig.ini file to my new FileName.rpd but when the BI services restart the BI0002 file reappears in the repository directory and the NQSConfig file changes to reflect this. It's like the only way you can change this is in the Enterprise Manager, but that always adds the suffix to the file.
Any suggestions?
Here's what the docs say:
When you upload a repository, it is copied to the local repository directory for each Oracle BI Server component, located at:
ORACLE_INSTANCE\bifoundation\OracleBIServerComponent\coreapplication_obisn\repository
If you have published the repository in shared mode, then the repository is also copied to the shared network location.
After the repository is uploaded, it is given a version number suffix (for example, SampleApp_bi001.rpd). This version number is incremented each time that the repository is uploaded. To revert to a previous version, you must re-upload the specific version of the repository to use.
Note that you can delete older versions from the repository directory or shared network directory to reclaim disk space.
What does that mean? I have to use an old rpd file in order to get rid of the suffix?

Hi,
It can be changed, although I do not no exactly how. You have to take a look at the MBeans which are used to deploy a new repository. The suffixed is used to insure you do not overwrite an existing RPD
Cheers,
Daan Bakboord
http://obibb.wordpress.com

How to change the ipad's name in iTunes

When i connect ipad to PC, the iTunes gives it the name as " "My PC Account" 's ipad" automatically.
For the reason of facility management, I need to change the ipad's name which appear at iTunes.
How to fix it?

It doesn't work for me. In iTunes I renamed my iPad, then sync it with ipad. After disconnecting and then reconnecting the device, only old name appears in iTunes. It seems the change of name is volatile! Can anyone help? Thanks.

How to modify capabilities for the ethernet interfaces in a Solaris 10 x86

Hello.
Does anybody know how to configure the ethernet capabilities in a interface in a X86 server? I have read that NDD command is not supported for this kind of servers and I cannot find how to do that.
My root problem is that the IPMP is not working and my first clue is the configuration for cap_pause parameter in the involved interfaces, that they are active for both IPMP interfaces.
How can I modify cap_pause for the interfaces in this server: X4170 with Solaris 10.
Thanks in advance
Regards,
Luis.

Not familiar with the X4170 but you might want to look for a config file in /kernel/drv that matches your interface. There are some configuration parameters you can set there if the device driver supports the .conf file.

How to change the TestStand directroy name?

Hi,
I'm interested to change the TestStand directroy name to 'TestStand' instead of 'TestStand 3.0' or 'TestStand 3.1'.
I'm facing a problem with this name. Here is an explanation:
Right now we have TS3.0 and TS3.1 installed on several computers. We work on projects that share modules (like GPIB). These modules are in a ClearCase system, so each one of us can use them and modify them. These modules call to some TS files like 'tsutil.fp' (which is located on the C drive). As a result of different TS names, the project which formerly called a file in TestStand 3.0 directory is now looking for the same file in TestStand 3.1 directory which it doesn't find...
Can you advice me how to modify the TestStand directory name to 'TestStand'?.
Thanks
Rafi

In TestStand, if you go to the Configure>>Search Directories menu, you can add user defined paths to search directories. You have the option to add/remove/move up and move down the search directories. However these options are valid only for user defined search directories. The paths to directories that come shipped with TestStand cannot be removed or moved up/down. In your case, I would suggest that you create a custom path to the directory where you want to search and move it right to the top of the list using the "move up" button. In this way that particular directory will be searched first.
Thank you
Nandini Subramaniam
Applications Engineer
National Instruments

How to change the sender's name/email-id in the scheduled report

Hi,
We have SCOM 2007 R2. In the Reporting tab (SCOM Console), we have some scheduled reports. I need to change the sender's name/email-id in a scheduled report. When we receive the report through email, receiving with the person's name who moved out of the
team.
I tried to change but could not find the option to change while editing the properties in SCOM Console under Reporting -> Scheduled Reports.
When we are receiving mail from that scheduled report, instead of an individual name, would like to provide a generic name. Please help me out. Let me know, if you need more information.
Thanks,
Naren.
Thanks & regards, Naren.

Hello,
the SCOM scheduled reports feature rely on SQL Reporting Services. So, if you would like to change the SMTP configuration, you should go in SQL Reporting Services Configuration Manager:
Open in the Start Menu, Reporting Services Configuration Manager.
In the connection window, click OK.
Click on the tab E-mail settings.
Change the Sender Address.
Click Apply.
Alternatively, you could also change in the Scheduled report properties the field
Reply to. I think it should customize the reply address for each scheduled reports, but I have never used it. Anyway, doing it with Reporting Services Configuration Manager is more interesting in the long-run.

How to change the print queue name with Lexmark printer?

Is it at all possible to change the print queue name from Lexmark_3500_4500_Series, to something shorter? I try to link printouts from an old Sun Unix system, thru my iMac to the Lexmark X4580 multifunction printer. However, the Sun/Unix will not accept this long print queue name...

Apologies, I misread. The only way I know of changing the Print Queue Name is by readding the printer.
 > System Preferences > Print & Scan > Add
Choose your printer, make sure you change the print queue name to something different (equates to the Printer Name).
When you need to print, simply select the printer you just added.
Once your happy it works, delete the old printer from the list in Print & Scan.
Morgan

How to change the iPad interface language from Chinese to English?

On my iPad's 'Settngs' software I was selecting Chinese and Arabic keyboards to enable input in those languages which I am learning and went on to activate those languages in other settings also. This somehow changed the interface language to Chinese and now program names and menus in 'Settings' program are all in Chinese which I cannot understand and thus cannot go back to English. How to change to English language without having to restore or reset my iPad as I do not want to loose the data in it.
Thanks
Mustafa

This might help : https://discussions.apple.com/message/15351767#15351767

How to change the excel file name which is in Application server...

hi friends,
my requirement is getting failed, when i'm trying to change the file name which is in Application server using the FM: SXPG_COMMAND_EXECUTE.
when i execute above FM, i can see all my required details in SM69 like:
COMMAND NAME: ZSPOOL_TEST1
OS: Windows NT
TYPE: Customer
OS COMMAND: cmd rename Y:\OBRZ.PDF OBRZ38582.PDF
once the above FM is executed, i'm getting SY-SUBRC = 2 (exception: COMMAND_NOT_FOUND).
so, can any one guide me how to resolve this issue or is there any other way to rename the file which is in AS?
thanks in advance...

Hi ,
First you can tranfer the AS server file to a new application server file.
Then you delete the original file .
To do that you can write code as follows --
DATA : w_file(8) TYPE c VALUE 'FILE_NAM', " your present AS file name
       w_new(8) TYPE c VALUE 'NEW_FILE',
       fs_itab(255) TYPE c,
       t_itab LIKE TABLE OF fs_itab.
OPEN DATASET w_file FOR OUTPUT IN BINARY MODE.
DO.
READ DATASET w_file INTO fs_itab. " Reading value from the AS file to field string
IF sy-subrc NE 0.
    EXIT.
ELSE.
    APPEND fs_itab TO t_itab. " Populating internal table form the file value
ENDIF.
ENDDO.
OPEN DATASET w_new FOR INPUT IN BINARY MODE. " creating a new file if that does not exist
LOOP AT t_itab INTO fs_itab.
TRANSFER fs_itab TO w_new. " Transfering to file
ENDLOOP.
CLOSE DATASET w_file..
DELETE DATASET w_file. " Dleting the old file
CLOSE DATASET w_new. " Closing the final file
Regards
Pinaki

How to keep the ethernet interface up when removing the cable?

On 10.6 I notice that if the ethernet cable is unplugged, it will not bring the interface up. As a result, I cannot test my server without the interface attached. For instance, if en0 is 192.168.2.10 and a web server is running, the local DNS translates the web servers domain to 192.168.2.10, I cannot reach my own web server as there is no route to host. This is probably energy conservation issue, but it makes life rather unpleasant, because if the interface goes down when there is a cable problem, I also get all sorts of internal problems because of the missing host (e.g. a virtual machine looking for a DNS server on 192.168.2.10 which is suddenly unreachable).
This was not the case with 10.5 Server and I think the last time I had this kind of behaviour was with my NeXT cube where the en0 interface would not come up without a cable attached to it and a switch.
So, is there a way I can force OS X 10.6 to bring up the en0 interface on 192.168.2.10 no matter what?

I have made my DNS reachable at all times by using 127.0.0.1 for the "DNS to use" in my ethernet settings in System Preferences.
Using localhost is no go, as I am running three separate IP-addresses (three en intrerfaces) on my single RJ-45. This way, I can let several web sites for different domains listen to different IP-addresses. Furthermore, I can make sure on the router's NAT that for instance only one of those gets the port 443 traffic and that one does not get port 80 and the other way around.
The solution I have now is a cable attached to a switch attached to nothing else. But it is inelegant, I'd rather know how to make the interfaces come up regardless what is attached to the RJ-45.

How to change the "created by" name in calendar entries

My iPad calendar events have a typo in the "created by" name field. Does anyone know where this name comes from and how to change it?
I'm running the latest iOS. I sync with Outlook on a stand-alone Windows 7 PC via iCloud (not using Exchange). It does not seem to matter on which device the events are created.

This type of question should really be asked in the Feedback on Developer Exchange forum or by email the site administrator directly, I'm sure the people that recieve these messages as part of their newsgroup services don't want read about DE specific problems.
That being said, click on "My Profile" in the top right corner of all NI web pages. From there click on "Modify Profile". You will see a box containing your information including your "Alias", click on edit and change your alias.
Brian

How to change the SystemID (system name) of the HP StoreOnce Virtual Storage Appliance (VSA)

I can't seem to find a darned way to post a question regarding the HP StoreOnce Virtual Storage Appliance. I want to change the name (SystemID) of a StoreOnce VSA that has already been deployed. The web interface has NO way of changing any value.
The command line interface (through ssh) doesn't seem to have any way to change the SystemID value in any way. I want to change this value so that when I have it join the Active Directory domain it is a meaningful name, and NOT the serial number of the VSA.
I KNOW that I am asking in the wrong place, but I don't know what the proper place is to ask this question.
Unless you have either of the below keep your comments to yourself:
1) a real suggestion on where to post this
2) an answer to my question

Bill, welcome to the forum.
I believe you will receive the help that you need if you start a thread here.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

How to change the Group Display Name in the UME?

Hello experts,
from time to time due to reorganisation our departments group names change.
So far this was a big deal because it is not possible to change the Display Name of a group created in the Portal´s UME?
So far a new group with the department name has to be created and all group members have to be connected to the new group again. This is not a convenient way..
Is there a way to configure the UME to allow to modify the Display Names of Groups?
Thanks in advance.
Thomas
Edited by: Thomas Krynicki on Jan 19, 2009 5:15 PM

Thank you for the quick answer.
However my problem is still not solved.
I am using the portal groups also as permission objects for KM. That´s why I do not want to create a new group because the new one will not appear in the ACLs of the KM Objects.
For me it is important to modify the Display Name of an existing Group. The GroupID shall not change. The new Display Name should be updated then automatically in the ACLs of KM Objects in question.
By exporting the group data:
[group]
gid=TeamA
gdesc=All members of Team A
user=member1, member2
There is no parameter for changing the Display Name of the group. There is only the Description Parameter.
So far I didn´t find any solution.
Any other ideas.
Thanks in advance.
Thomas

How to change the Ethernet Interface name in Solaris 10

Similar Messages

Maybe you are looking for